ALEC & ALEMCO offices in Dubai achieve LEED Platinum and LEED Gold certification
By
The move reflects the company's deep-rooted commitment to quality, sustainability and employee well-being
ALEC has said that following its extension renovation works, it has been awarded LEED Platinum certification for its headquarters in Dubai. The firm said that its MEP subsidiary, ALEMCO, has also secured LEED Gold certification for its corporate office and adjoining yard in Dubai Industrial City.
These certifications, awarded by the US Green Building Council for Commercial Interiors, reflects the company's deep-rooted commitment to quality, sustainability and employee well-being, the firm said in its statement.
'Our priority was to enhance the overall workplace experience for our people, while embedding sustainability at every stage of the renovation. With improvements ranging from low-flow water fittings to LED lighting and advanced energy metering, we've not only reduced our footprint but reaffirmed our commitment to creating better buildings. These upgrades echo the same principles we bring to client projects, helping them meet and exceed their green building targets,' said Barry Lewis, CEO at ALEC.
LEED for interior design and construction (LEED ID+C) is a green building rating system focused on the design and construction of interior spaces within commercial buildings. The upgrades mark a significant milestone for ALEC, as it continues to invest in creating healthier, more efficient workspaces. By achieving the highest level of LEED certification, ALEC demonstrates both its capabilities in delivering world-class green building solutions, and its determination to hold its own operations to the highest standards, the statement highlighted.
To earn the certifications, ALEC said that it implemented a wide range of sustainability measures across both facilities. Water consumption was reduced by 55% from baseline through the use of low-flow fixtures equipped with sensors, and lighting energy was cut by 25% compared to ASHRAE 90.1-2010 standards, thanks to the installation of energy-efficient LED fixtures, occupancy sensors, and enhanced commissioning protocols. Indoor environmental quality was also enhanced through the use of low-VOC paints, adhesives, and materials, while design features maximised daylight use and improved acoustics.
Significant attention was given to responsible sourcing and material reuse. Structural materials included steel with 25% post-consumer recycled content, 100% bio-based wall boards for phone booths, and high-recycled content in insulation and ceiling components. Similar practices were adopted at ALEMCO's facility, reinforcing the company's circular approach to design and construction, the firm explained.
Almost 100% of workstation tables, wooden wall panels, reception desks, joinery, storage units, and various meeting room elements from ALEC HQ offices were diverted and reused at the company's new design office in Dubai, reducing refurbishment-related waste. The firm said the achievement extends its track record in helping clients realise their own green building ambitions.
'As we continue to drive the sustainability agenda forward across the region, our own renovations stand as proof that you don't need to choose between sustainability and design. With careful planning, extensive reuse and responsible material selection, organisations can elevate their interiors while delivering on environmental performance. We're proud of what we've achieved and look forward to supporting more partners across the region in their own green building journeys,' Lewis concluded.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
The National
17 hours ago
- The National
Heathrow must look to Dubai for inspiration if expansion is ever to take off
Sixty kilometres or so from Dubai International Airport, they are working flat-out, building the world's biggest airport. Khalifa Al Zaffin, executive chairman of Dubai Aviation City Corporation, says Al Maktoum International Airport will be operational in phases with the first set to be operational in 2032. Key contractors are mobilised, construction is proceeding and a contract has been issued to develop a second runway for the new airport. When completed, the initial section will be capable of handling up to 150 million passengers annually. In all, when it is finished, Al Maktoum International will cater for 260 million passengers a year. It's intended to fully replace Dubai International Airport within 10 years. In the UK, they can only look at what is unfolding in Dubai with wonder and envy. The sheer scale, the numbers, the dates – they make the country's own history of airport expansion look anachronistic and desperately cack-handed and cumbersome. They've been arguing about growing Heathrow since 1968. If the third runway is ever built it will see the main London airport accommodate 150 million travellers a year, which just happens to be the same as that first phase of the Al Maktoum International. Rachel Reeves, Chancellor of the Exchequer, has set a deadline of 2035 for the new runway to be operational, so three years after Al Maktoum International is up and running. The contrast between the two could not be greater. Still, Prime Minister Keir Starmer and Ms Reeves insist Heathrow's third runway is to go ahead. But if you were prone to gambling, which would you select as most likely to hit its targets? It's not just the comparison with Dubai that is stark. Other airports have been planned and constructed and expanded all around the world while the UK prevaricates. The UK argues while they get on and do it. Looking at how civil aviation develops and operates elsewhere is not only a statistics game. It matters for a simple reason, that airlines and passengers are examining like-for-likes on a daily basis. Air travel is a global industry; Dubai, London and other destinations are all bound up in international competition. Customers, whether they are companies like the passenger and freight operators, or business and leisure travellers, are scrutinising prices and what they receive for their money. Decades of flight through Heathrow - in pictures At present, the most expensive airport in the world is Heathrow. It is set to become even more costly should the scheme receive approval. Under plans just submitted to the government, Heathrow is reckoning on spending £49 billion ($65.14 billion), which will be recovered from increased landing charges that will in turn be recouped by the airlines from higher fares. Again, Dubai rears its head. The bill for the new Al Maktoum International is projected to come in at £26 billion. By the end, Heathrow will have only three runways compared with Dubai's total of five. Heathrow's funding will be private, reflecting a British way of paying for major infrastructure improvements that effectively encourages spending without financial comeback to the developer. They can "gold-plate" in the knowledge they are not bearing the expense, which ultimately the end user, in this case the air passenger, will cough up. The most glaring example of how this can play out, to the detriment of the consumer, is in the UK water industry. It too was privatised, along with the British Airports Authority, operator of Heathrow, in the Thatcher era. The identical regulatory framework was applied and ever since, the price of water and the profits enjoyed by the water companies – but not the quality of service – has kept on climbing. A similar structure exists and will, barring an unlikely change in the rules, be followed again at Heathrow. Of course, Heathrow is not Dubai. The London airport was built originally in the wrong location, at a West London site, which in today's world of vastly busier air travel is no longer fit for purpose. It abuts the M25, one of Britain and Europe's most congested motorways, and is in a part of the South-East that is criss-crossed by rivers and streams and their valleys. Adding a new runway is a mammoth undertaking, requiring complex engineering and environmental considerations. Heathrow management believes it has found the solution by erecting a tunnel, diverting from the frequently jammed road under the air strip. Cue probable campaigns and protests as wholesale protracted vehicle disruption, despite Heathrow's assurances to the contrary, is almost certain to occur. To do it without would be nothing short of a miracle and few share Heathrow's optimism. What is telling is how a key plank in the UK government's economic growth strategy is allowed to progress in such a manner. According to Ms Reeves, as she announced the government's support for the third runway this year: "These are decisions the national government makes, and this Labour government backs Heathrow expansion, backs the third runway at Heathrow." That is not her fault, it's the UK methodology – same with the water companies. Witness too HS2 where the planned, landmark superfast rail service to the North-West is drastically curtailed and subjected to monumental delay, and the bill spirals ever upwards. A cheaper alternative to the Heathrow plan has been proposed by the self-made billionaire and airport hotels developer, Surinder Arora. His vision encompasses building a shorter runway that does not threaten the M25 and plays to the airlines' preference for smaller long-haul aircraft. Mr Arora, who counts Bechtel in his line-up, is also advocating Heathrow's new terminal would be operated by a company with a proven high-grade record in high-grade airport management to inject competition into the West London set-up. His final sum, for a runway and terminal, is £25 billion, again close to that Dubai £26 billion figure. Mr Starmer and Ms Reeves may stick with Heathrow or as some would regard it, gamble, and pick Mr Arora. Or they could follow previous governments and admit defeat and consign Heathrow's expansion to the drawing board. The difference this time is that it has been made vital to their economic growth strategy. In that sense, presumably, it must happen. But how remains to be seen.
Gulf Business
a day ago
- Gulf Business
Asian Paints launches world's first internal curing concrete additive in UAE
Image: Asian Paints 'With CureAssure, we're not just launching a product; we're redefining a foundational step in construction. This innovation reflects our commitment to sustainable solutions that work in the real world,' said Joseph Eapen, CEO of Asian Paints. Joseph Eapen, CEO of Asian Paints Curing is one of the most critical but often overlooked phases in concrete construction, influencing structural strength and durability. In the Middle East, this step is frequently compromised by extreme temperatures, labour constraints, and compressed project timelines. These site challenges often result in shrinkage cracks and reduced long-term performance. Asian Paints' CureAssure addresses these issues by introducing internal curing directly into the concrete mix. The additive enables hydration to occur from within, eliminating the need for external water or surface curing compounds. This approach reduces plastic shrinkage and cracking, ensures greater durability, and guarantees consistency across varying site conditions. It also aligns the performance of on-site concrete with laboratory-tested standards — a vital requirement for real-world reliability. 'Developing CureAssure meant rethinking curing from the inside out,' said Amit DasGupta, chief senior manager – Technology, AP Global. 'Rather than treating symptoms on the surface, we focused on solving the root cause, by embedding water availability directly where it's needed. The result is a more robust, reliable concrete structure, regardless of the environment it's placed in.' CureAssure has received approval from Dubai Municipality and validation from ICC-ES. Free of hazardous substances, it is compatible with all types of Portland cement, pozzolanic blends, and both water-reducing (WR) and set-retarding (SR) admixtures. The additive meets globally recognised standards including ACI 308 guidelines for internal curing, ACI 318 structural durability provisions, ASTM C494/C494M Type S, and EN 934-2 European admixture compatibility norms. Aligned with the UAE Water Security Strategy 2036, CureAssure's elimination of external curing also removes the need for desalinated water in the construction process. Asian Paints estimates that the water saved annually could fill 3,200 Olympic-sized swimming pools, irrigate over 6,000 acres of desert farmland, or meet the monthly water needs of 450,000 households. The solution also contributes to low-carbon, zero-waste construction practices by reducing the need for water transport, on-site manpower, and curing-related emissions. With over 80 years of expertise in coatings and construction materials, Asian Paints is among the top two paint companies in Asia and operates 26 manufacturing plants across 15 countries. The launch of CureAssure represents a strategic expansion of its regional footprint and underscores the company's commitment to delivering smarter, safer, and more sustainable infrastructure solutions across the GCC.
Zawya
a day ago
- Zawya
Ikigai Steel drives 20 major projects from Sharjah base; eyes expansion into Africa, Canada
Ikigai Steel, a prominent company in structural steel engineering, fabrication, and construction, has completed more than 20 large-scale industrial and commercial projects across the UAE and the wider Gulf region. Operating from its newly established factory in Sharjah's Hamriyah Free Zone, spanning 548,000 square feet and backed by an investment of AED 30 million, the company is now gearing up for international expansion. The company plans to expand its operations into Canada and Africa, with ambitions to scale its annual production capacity to 45,000 tonnes. The milestone reflects Sharjah's growing role as a global hub for industrial investment and international expansion. Saud Salim Al Mazrouei, Director of the Hamriyah Free Zone Authority, visited Ikigai's new facility, where he was received by CEO Rohan Raj Nadarajan, as well as officials from both sides. During the tour, Al Mazrouei was briefed about the factory's advanced manufacturing systems, which include precision laser cutting and automated welding lines. The facility also features proprietary 3D steel twisting/forming technology that enables the production of complex structural components for use in high-profile projects such as stadiums, bridges, airports and architectural landmarks/iconic structures. Company executives also introduced Al Mazrouei to Ikigai Steel's key drivers behind the company's success, including its rigorous quality and safety protocols in manufacturing operations. The discussion covered Ikigai Steel's contribution to regional infrastructure supply chains and its ambitious expansion plans, fuelled by a growing client portfolio that includes major names such as Abu Dhabi Airports, Emaar, Neom/Air Products/CCC, Red Sea Global/China Steel, ALEC, AES, Dutco, Pfeifer, Meraki and Sobha. Al Mazrouei affirmed that Sharjah continues to strengthen its position as a leading industrial hub in the region, capable of attracting high-quality projects and supporting their rapid and sustainable growth. For his part, Ikigai Steel CEO Rohan Raj noted that Ikigai Steel has recorded significant growth since launching operations in the Hamriyah Free Zone, crediting the free zone's strategic location and advanced infrastructure for creating an ideal business environment. He said this foundation enabled the company to execute multiple large-scale industrial projects, expand into new markets such as Canada and Africa, and scale up its production capacity to meet rising demand. Rohan added that the company's rapid increase in workforce, now exceeding 200 employees, demonstrates the expansion of its operations and its success in attracting and developing skilled talent, particularly in advanced manufacturing and 3D steel twisting/forming technology, one of the sector's most cutting-edge innovations.
