
AMC approves 37 projects for pre-monsoon action plan
Ahmedabad: The Ahmedabad Municipal Corporation (AMC) on Monday approved 37 projects worth Rs 841.45 crore to prepare for the monsoon action plan and prevent inconvenience to citizens.
Work already commenced, and excavation started at 32 locations as part of these projects.
The water and sewerage committee of the AMC ordered contractors to place warning signs at sites to mitigate inconvenience if roads subside during the monsoon. In cases where roads sank, immediate repairs were mandated.
On May 7, unseasonal rainfall caused waterlogging in areas such as Vejalpur, Naranpura, Navavadaj, and Jodhpur.
It was the result of errors by AMC officials, sources said. The pits in areas like Vejalpur were sealed with plastic covers to prevent mosquito breeding and odour, which led to waterlogging during unseasonal rain on May 6 and 7. Additionally, pumps around the Kharicut canal became non-operational due to redevelopment efforts, causing waterlogging in eastern areas.
The AMC committee ordered precautions to prevent accidents in areas where digging work was underway under the pre-monsoon plan.
by Taboola
by Taboola
Sponsored Links
Sponsored Links
Promoted Links
Promoted Links
You May Like
Good News: You May Be Richer Than You Think
FinanceAdvisors.com
Undo
D
ilip Bagaria, chairman of the water and sewerage committee, stated that Rs 841 crore were allocated to 37 projects under the pre-monsoon action plan. Excavation work began in areas like Madhumalati, Gopal Chowk, Odhav, Bopal, and Ghuma for stormwater lines. Given the possibility of roads sinking in these areas during the monsoon, instructions were issued to place warning signs and carry out immediate repairs.
Last year, between Aug 25 and 27, an average of 10 inches of rain lashed Ahmedabad every day, leading to waterlogging at over 300 locations. While most sites were cleared within an hour, 157 locations experienced waterlogging for more than an hour, and 10 spots remained flooded for 1-4 days. After heavy rains in Aug 2024, 32 new waterlogging spots were identified. The number of waterlogging locations increased to 157 following the heavy rains, according to a list released by the AMC.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Time of India
16 minutes ago
- Time of India
Shadow supply chain and missing E-way bills: How this pan masala manufacturer evaded GST
Gurgaon: A firm manufacturing pan masala and tobacco products for prominent brands allegedly evaded tax up to Rs 5 crore by running a shadow supply chain that operated out of illegal warehouses along the Delhi-Faridabad border. Officials of the Central GST office said the firm transported finished products from its registered manufacturing unit in Delhi to illegal warehouses in Faridabad. From these sites, goods were transported across Delhi-NCR by truckers without any E-way bills. An 'E-way bill' is a mandatory GST document that is to be carried by whosoever is transporting a good or delivering a service. Since there was no official record of these goods, the company bypassed any tax obligations on them. A CGST Faridabad official told TOI on Monday that they received intelligence about the fraud, and on June 7 and 8, they conducted simultaneous raids at five spots. This included four unregistered properties linked to the firm in Faridabad, and an official facility in Delhi. "The four warehouses were storing unaccounted goods of major brands such as Shikhar, Tansen, Kamla Pasand, Swagat Gold, SS One, Hans and Double Black. Searches were carried out at the Delhi facility of the company, where we found a stock mismatch of goods too," the official said. He added that the raids were carried out in coordination with the CGST Delhi (East) unit as one of the facilities was under its jurisdiction. After the raids, a CGST team intercepted a truck in Faridabad, close to the border, and uncovered 6.3 lakh packets of pan masala valued at Rs 25 lakh. The trucker did not possess any E-way bill. The official said that unregistered warehouses were close to the Delhi border to make it convenient to divert unaccounted goods from the main facility in the capital. "This case highlights growing sophistication in tax evasion schemes and efficacy of data analytics in detecting such frauds," the joint commissioner of CGST Faridabad said. He added that the department is investigating and will initiate legal proceedings against the manufacturer. The company could not be reached for comment till Monday night. This isn't the first time that the firm has come under CGST scanner. Last year, CGST teams raided two of the company's facilities in Uttar Pradesh's Sahibabad and Bulandshahr industrial areas for alleged tax evasion. At the time, officials had estimated GST evasion of Rs 1.8 crore. Then too, the firm manufacturing pan masala and tobacco products for prominent brands had allegedly stored unaccounted goods.


Time of India
16 minutes ago
- Time of India
NCRTC moots Namo Bharat semi-high speed rail corridor connecting B'luru & Mys
Bengaluru: Even as the state govt accelerates efforts to expand Namma Metro to neighbouring districts like Tumakuru and key satellite towns such as Harohalli, Bidadi, Devanahalli, and Jigani, the National Capital Region Transport Corporation (NCRTC) proposed a plan to introduce semi-high speed Namo Bharat trains to enhance regional connectivity. In a proposal to the state govt, NCRTC suggested developing a Regional Rapid Transit System (RRTS) along four key corridors. These include Bengaluru–Hoskote–Kolar (65km), Bengaluru–Mysuru (145km), Bengaluru–Tumakuru (60km), and an inter-state corridor from Bengaluru to Hosur, Krishnagiri, and Dharmapuri (138km). The proposed corridors aim to provide faster and efficient connectivity between Bengaluru and its rapidly growing outskirts and neighbouring districts. The estimated travel time between Bengaluru and Kolar, and Bengaluru and Tumakuru is around 46 minutes. The Bengaluru–Mysuru route is expected to take approximately one hour. NCRTC, which is implementing the country's first Namo Bharat corridor between Delhi, Ghaziabad, and Meerut, designed the system for a maximum operational speed of 160 km/h, capable of covering 90km in an hour. Since Oct 2023, 55 kilometres of the total 82-km Delhi–Meerut corridor was operationalised. In May, NCRTC wrote to the chief secretary of the state govt, proposing the development of RRTS corridors. The corporation also invited state officials to visit the operational corridor from Sarai Kale Khan (Delhi) to Modipuram. The letter stated that NCRTC is willing to undertake the preparation of detailed project reports (DPRs) for these or any other corridors as assigned by the Karnataka or Central govts. NCRTC claims that Namo Bharat is distinct from Metro systems, as it caters to passengers travelling relatively longer distances with fewer stops and at much higher speeds. Namo Bharat trains are designed for a speed of 180 km/h, with an operational speed of 160 km/h and an average speed of 90 km/h—nearly three times faster than a typical Metro. It also claims that unlike conventional railways, the system is designed to provide reliable, high-frequency, point-to-point regional travel along a dedicated pathway. Meanwhile, the Bangalore Metro Rail Corporation Limited (BMRCL) recently submitted a feasibility report for extending Namma Metro from Madavara to Tumakuru over a stretch of 59 km. The proposed line, featuring 25 stations, is estimated to cost Rs 20,650 crore under a Public-Private Partnership (PPP) model and Rs 18,670 crore if implemented through a Special Purpose Vehicle (SPV). The feasibility report is under way for extending Namma Metro to Attibele, Jigani, Devanahalli and other towns on the outskirts.


Time of India
31 minutes ago
- Time of India
NMDC masters vein mining, now eyes critical minerals extraction
1 2 Hyderabad: When India's largest iron ore miner NMDC Ltd made a strategic foray into gold mining in Australia in Nov 2023, the company's managers believed they had nothing new to learn. After all, they had been in the mining business for the past six decades. What they didn't anticipate is their traditional blast and grab operation was of no use in gold mining and for the first time, they were forced to acquire new skills - the precision of a surgeon needed for vein mining. This new skill is also giving the Navratna PSU specialised knowledge needed for deep-seated critical minerals extraction. Today, NMDC has not only mastered the art of vein mining but is also all set to rake in its first set of profits from mining this precious yellow metal through its Australian arm Legacy Iron Ore Ltd after the initial setbacks. "The last two-three months we have turned around and been cash positive. If things continue the way they are going right now, we should be in the green this year (2025-26)," Amitava Mukherjee, chairman & managing director, NMDC Ltd, told TOI in an exclusive chat recently. Mukherjee said the diversification into gold mining has been a strategic learning curve for the company with its Mt Celia gold mine in Australia, though relatively small in scale, serving as a crucial learning ground. "It was a very conscious forward point. In the last 60 years, we have done bulk mining of iron ore, which is completely different from vein-type, deep-seated mining. When we went ahead with this project, we found we had no expertise in this type of mining," Mukherjee said. Explaining the unique challenges this type of mining poses, he said the gold deposits at Mt Celia have veins as thin as one to two metres, requiring precise extraction techniques. This is in stark contrast to NMDC's traditional iron ore mining operations, where bulk extraction methods are employed. "In iron ore mining, you would blast from left to right throughout. But in gold mining, blasting has to be absolutely controlled. It has to be precise because all you have is just two metres. The moment you dilute it, the grade drops from 2 gm to 1 gm per tonne," Mukherjee said. "You have to spot it correctly; the size of the equipment has to be very correct. Every aspect of vein mining and deep-seated minerals mining is completely different," he added. He said the decision to start small with Mt Celia, which has reserves of around 8,000 kg (8 tonnes), was conscious. "As a matter of strategic forward thinking we started with a very small gold tenement at Mount Celia. So if we lose, we lose less money. Let's not start with a Rs 1,000 crore sort of investment we thought," he explained. The Mt Celia mine currently produces gold ore with grades ranging from 1.5 to 2.1 grams per tonne, which Mukherjee described as "pretty good in gold mining." In FY25, it was able to mine around 350 kg of gold at Mt Celia and expects to produce 1,000 kg in the current financial year. Having mastered precision vein-mining, NMDC is now looking to expand its gold mining portfolio, with several tenements adjacent to Mt Celia under consideration. "We have a lot of gold tenements which are pretty good for us. However, we decided to start with Mount Celia's Blue Peter and Kangaroo Bore pits to gain experience first," Mukherjee said. Apart from Mt Celia, it also has Yilgangi, Yerilla, Patricia North and Sunrise Bore in Australia. W hile acknowledging the initial losses, he said NMDC remains confident about the long-term prospects of its gold mining operations. "I'm not really bothered about that Rs 150 crore or Rs 160 crore losses that we have made. What we've lost, we'll gain next year," Mukherjee stated, emphasising the strategic value over short-term financial results. NMDC, which acquired 50% stake in Legacy Iron Ore in 2011 and has been steadily hiking its stake, currently holds over 90% stake in the Australian company with plans to take this up to 100% over a period of time. NMDC's experience in gold mining is expected to play a crucial role in its future diversification plans, particularly in mining other strategic minerals that require similar precision mining techniques, he indicated. The company views this as a necessary evolution in its mining capabilities that will help it position itself for opportunities in various strategic critical minerals, Mukherjee said, pointing out that minerals like Lithium require the same set of expertise. Gold and lithium are among the 10 key minerals, including critical minerals, that NMDC has decided to focus on. These also include copper, coking coal, nickel, manganese, dolomite, bauxite and cobalt. "As a company we have been mandated by the board to focus on these 10 minerals, which includes our bread and butter iron ore and other critical minerals. We are very clear we are not going to do rare earth minerals," he said. This foray has also meant significant organisational changes within NMDC, including the development of new operational divisions and acquisition of specialised expertise. The company has established a dedicated team for precision mining operations, marking a departure from its traditional bulk mining focus.