Tailings management: new issue out now!
Over the past few years there has been a concerted industry effort to drive the responsible management of mine tailings.
In January, the independent Global Tailings Management Institute was launched with a mission to promote the adoption and implementation of the Global Industry Standard on Tailings Management (GISTM), launched five years ago.
Already many mining companies are well on their way to adopting the voluntary GISTM and its 15 principles. In the March issue of MINE we speak to industry players to find out what GISTM has already achieved, and the efforts that are still needed to address the changing environment.
Additionally, we look at how AI is supporting tailings monitoring and management, including by potentially reducing mining waste streams.
We also explore the scope for using AI robots to build a workforce and what development could mean for the mining sector.
In commodities, we examine the global outlook for cobalt mining, as well as projections for the lithium market to 2030. Also, following record coal production and demand in 2024, we look at the future of coal in key regions such as China and the US, where demand did not fall as sharply as expected.
You can read the March issue of MINE at:https://mine.nridigital.com/mine_mar25/issue_150
March will also see the Prospectors & Developers Association of Canada (PDAC) welcome more than 1,100 exhibitors, hundreds of expert presenters and panelists, and thousands of industry representatives to Toronto for its 93rd annual convention: PDAC 2025.
You can check out what to expect at PDAC 2025 in our event preview.
Mining Technology is in attendance at PDAC 2025, with our editor, Caroline Peachey, on the the ground. Contact us (energyeditorial@globaldata.com) to arrange a meeting or an interview. We hope to see you there!
"Tailings management: new issue out now!" was originally created and published by Mining Technology, a GlobalData owned brand.
The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
3 days ago
- Yahoo
China's energy sector ramps up coal buying amid rising stockpile levels
China's coal industry is currently experiencing an oversupply, leading to increased stockpiles after a significant expansion in production, reported Reuters, citing sources. Despite having the world's largest thermal power fleet, China is producing more coal than it can consume, resulting in a 42% year-on-year (YoY) increase in mine stockpiles and a 25% annual rise in inventories at northern Bohai area ports. This expansion was a response to the energy shortages and blackouts that occurred in 2021. According to the report, power plants are being encouraged to purchase coal from these northern ports to help reduce the high stockpile levels and support miners, according to three sources. These directives from the National Development and Reform Commission come after persistent appeals from industry groups and companies to cut back on coal imports and production. Despite record imports of 542.7 million tonnes of coal in 2024, coal imports have decreased by 16% in April compared with the previous year, the report said. Chinese coal production continues to rise, with a 6.6% increase from January to April, reaching 1.58 billion tonnes. This growth persists even as industry profits have plummeted by 48.9% YoY for the same period, as shown by official data. Moreover, the price of medium-grade coal has been on a downward trend, reaching 620 yuan ($86) per tonne, the lowest mark since March 2021. This decline has led some buyers to attempt to renegotiate long-term contracts in favour of more advantageous spot sales. Furthermore, China has temporarily lifted its ban on the export of rare earth elements and other dual-use items to 28 US companies. This suspension, which will last for 90 days, is part of a broader trade détente with the US and could signal a relaxation of economic tensions between the two nations. "China's energy sector ramps up coal buying amid rising stockpile levels" was originally created and published by Mining Technology, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
6 days ago
- Yahoo
Do you live near a dam holding mine waste? 6 questions to ask
Mining is essential to modern lifestyles. Copper, iron and other mined products are vital to the products many people take for granted, like electronic devices. Being able to buy these goods quite easily may give a person a false sense of how difficult it is to extract the elements they're made of. Mining involves the removal of mineral-rich rock from the ground and processing it to extract the high-value minerals. Depending on the mineral, this quantity can be as low as a few grams in a tonne of rock. For example, removing a tiny quantity of platinum from rock requires finely grinding the rock. The fine material that remains once the platinum is removed is known as tailings. Every mining operation produces tailings. This can be coarse, like instant coffee granules, or fine, like cocoa powder. Tailings are typically mixed with water to form a liquid slurry that can be pumped and transported easily. Slurry is kept in specially designed tailings dams. The designs are unique and depend on what is being mined and the local area. Unfortunately, the history of mining is stained with examples of poorly managed dams that collapse, spilling the slurry, which is sometimes toxic. This can cause serious environmental, social and economic damage. One such mine disaster happened in February 2025 in Zambia at the Sino-Metals Leach Zambia copper mine. Over 50 million litres of toxic waste flowed over the dam's wall into the Mwambashi River. From there it flowed into one of the largest and longest Zambian rivers, the Kafue. The pollution travelled further than 100km from the dam, contaminating the river, and killing fish and livestock on nearby farms. The Zambian government had to shut down municipal water to the city of Kitwe to protect residents from consuming the polluted water. This should not have happened, because steps have been taken to ensure proactive management of dams. In 2020, the Global Industry Standard on Tailings Management introduced a new set of safety measures and standards. Many mines are proactively embracing these standards. This enhances community trust in tailings dams. But other mines are not engaging with communities that might be affected by dams. Or communities may feel unsure what to ask the mines. We are geotechnical engineers who have studied tailings dam collapses. Here, we outline six questions people living near mines should ask mine management to ensure they understand the key hazards and risks in their communities. Each tailings dam has a zone of influence. This is determined by analysing what would happen if the slurry breached the dam walls and started to flow out. It is an estimate of the area which would be swamped by tailings if the dam failed. Generally, tailings disasters have caused significant damage up to a distance of 5km from the dam. If the tailings slurry gets into a river, it can flow hundreds of kilometres downstream. Read more: Zones of influence are often determined for extreme events, like once in a lifetime storms or large earthquakes. But zones of influence could also include places affected by dust or water pollution from the mine. If you can see a tailings dam from where you live or work you should consider yourself within the zone of influence. Clearly defined roles and responsibilities for day-to-day operation should be in place in every mine. There should be suitably qualified engineers appointed to carry out monitoring and maintenance of the dam. There need to be enough qualified people to cope with the size of the dam. The management structure should set out how day-to-day issues related to the tailings dam are discussed between workers on the ground in mines and top management, and how solutions are found. Mines should also keep audit and inspection reports on their tailings dams, and records should be kept over the long term (because tailings dams are often operational for several decades). Mines should have plans to reduce the impact that tailings dams have on the environment. These would have been informed by public participation. The plans must state what monitoring is in place to measure the impacts of dust and water (groundwater and surface water). The true extent of impacts only becomes apparent once the mine starts operating. So, the public should hold mines accountable for commitments made. Mines should satisfy communities that monitoring is continuing to identify and track the dam's environmental impacts. Closure plans should also be continuously communicated to mining-affected communities. This will assure the community that when the miners leave, they won't be left with a dangerous dam near their homes, with no one to look after it. A common way that tailings dams fail is when water or slurry washes over the dam sidewalls. This washes away the support. It is known as overtopping, and can happen in storms or if too much tailing is pumped into the dam. Overtopping is best managed by keeping the water a certain distance below the dam wall. Mine management must measure this regularly and control how much tailing they pump to the dam. Their task is to make sure that even in a severe storm the level will stay well below the top of the dam wall. Small failure incidents such as sloughs, slides and bulges where dam walls move but no slurry is released can occur. Mines should investigate and report these, detailing likely causes and mitigation measures implemented. Publicly available satellite imagery can easily show where mine tailings dams are becoming unstable. Mines should be transparent and provide explanations for these to avoid any speculation over whether the dam is stable or not. Sometimes dams must be changed to accommodate changes in mining or the extraction process. These changes could include how fast the dam is being built, moving the position of the dam wall, or placing material at the base of the wall to stabilise it. The unexpected consequences of alterations to a tailings dam could be water seeping out and creating damp spots, leading to dam walls sagging or cracking. If left unchecked this can lead to structural failure. When substantial changes are made to a dam's design, mines need to demonstrate that sufficient consideration has gone into making these changes. This article is republished from The Conversation, a nonprofit, independent news organization bringing you facts and trustworthy analysis to help you make sense of our complex world. It was written by: Charles MacRobert, Stellenbosch University and Talia da Silva Burke, Stellenbosch University Read more: South Africa needs to refresh how it manages by-products from mining Dam collapse at Brazilian mine exposes grave safety problems Mine waste dams threaten the environment, even when they don't fail The authors do not work for, consult, own shares in or receive funding from any company or organisation that would benefit from this article, and have disclosed no relevant affiliations beyond their academic appointment.
Yahoo
6 days ago
- Yahoo
Do you live near a dam holding mine waste? 6 questions to ask
Mining is essential to modern lifestyles. Copper, iron and other mined products are vital to the products many people take for granted, like electronic devices. Being able to buy these goods quite easily may give a person a false sense of how difficult it is to extract the elements they're made of. Mining involves the removal of mineral-rich rock from the ground and processing it to extract the high-value minerals. Depending on the mineral, this quantity can be as low as a few grams in a tonne of rock. For example, removing a tiny quantity of platinum from rock requires finely grinding the rock. The fine material that remains once the platinum is removed is known as tailings. Every mining operation produces tailings. This can be coarse, like instant coffee granules, or fine, like cocoa powder. Tailings are typically mixed with water to form a liquid slurry that can be pumped and transported easily. Slurry is kept in specially designed tailings dams. The designs are unique and depend on what is being mined and the local area. Unfortunately, the history of mining is stained with examples of poorly managed dams that collapse, spilling the slurry, which is sometimes toxic. This can cause serious environmental, social and economic damage. One such mine disaster happened in February 2025 in Zambia at the Sino-Metals Leach Zambia copper mine. Over 50 million litres of toxic waste flowed over the dam's wall into the Mwambashi River. From there it flowed into one of the largest and longest Zambian rivers, the Kafue. The pollution travelled further than 100km from the dam, contaminating the river, and killing fish and livestock on nearby farms. The Zambian government had to shut down municipal water to the city of Kitwe to protect residents from consuming the polluted water. This should not have happened, because steps have been taken to ensure proactive management of dams. In 2020, the Global Industry Standard on Tailings Management introduced a new set of safety measures and standards. Many mines are proactively embracing these standards. This enhances community trust in tailings dams. But other mines are not engaging with communities that might be affected by dams. Or communities may feel unsure what to ask the mines. We are geotechnical engineers who have studied tailings dam collapses. Here, we outline six questions people living near mines should ask mine management to ensure they understand the key hazards and risks in their communities. Each tailings dam has a zone of influence. This is determined by analysing what would happen if the slurry breached the dam walls and started to flow out. It is an estimate of the area which would be swamped by tailings if the dam failed. Generally, tailings disasters have caused significant damage up to a distance of 5km from the dam. If the tailings slurry gets into a river, it can flow hundreds of kilometres downstream. Read more: Zones of influence are often determined for extreme events, like once in a lifetime storms or large earthquakes. But zones of influence could also include places affected by dust or water pollution from the mine. If you can see a tailings dam from where you live or work you should consider yourself within the zone of influence. Clearly defined roles and responsibilities for day-to-day operation should be in place in every mine. There should be suitably qualified engineers appointed to carry out monitoring and maintenance of the dam. There need to be enough qualified people to cope with the size of the dam. The management structure should set out how day-to-day issues related to the tailings dam are discussed between workers on the ground in mines and top management, and how solutions are found. Mines should also keep audit and inspection reports on their tailings dams, and records should be kept over the long term (because tailings dams are often operational for several decades). Mines should have plans to reduce the impact that tailings dams have on the environment. These would have been informed by public participation. The plans must state what monitoring is in place to measure the impacts of dust and water (groundwater and surface water). The true extent of impacts only becomes apparent once the mine starts operating. So, the public should hold mines accountable for commitments made. Mines should satisfy communities that monitoring is continuing to identify and track the dam's environmental impacts. Closure plans should also be continuously communicated to mining-affected communities. This will assure the community that when the miners leave, they won't be left with a dangerous dam near their homes, with no one to look after it. A common way that tailings dams fail is when water or slurry washes over the dam sidewalls. This washes away the support. It is known as overtopping, and can happen in storms or if too much tailing is pumped into the dam. Overtopping is best managed by keeping the water a certain distance below the dam wall. Mine management must measure this regularly and control how much tailing they pump to the dam. Their task is to make sure that even in a severe storm the level will stay well below the top of the dam wall. Small failure incidents such as sloughs, slides and bulges where dam walls move but no slurry is released can occur. Mines should investigate and report these, detailing likely causes and mitigation measures implemented. Publicly available satellite imagery can easily show where mine tailings dams are becoming unstable. Mines should be transparent and provide explanations for these to avoid any speculation over whether the dam is stable or not. Sometimes dams must be changed to accommodate changes in mining or the extraction process. These changes could include how fast the dam is being built, moving the position of the dam wall, or placing material at the base of the wall to stabilise it. The unexpected consequences of alterations to a tailings dam could be water seeping out and creating damp spots, leading to dam walls sagging or cracking. If left unchecked this can lead to structural failure. When substantial changes are made to a dam's design, mines need to demonstrate that sufficient consideration has gone into making these changes. This article is republished from The Conversation, a nonprofit, independent news organization bringing you facts and trustworthy analysis to help you make sense of our complex world. It was written by: Charles MacRobert, Stellenbosch University and Talia da Silva Burke, Stellenbosch University Read more: South Africa needs to refresh how it manages by-products from mining Dam collapse at Brazilian mine exposes grave safety problems Mine waste dams threaten the environment, even when they don't fail The authors do not work for, consult, own shares in or receive funding from any company or organisation that would benefit from this article, and have disclosed no relevant affiliations beyond their academic appointment.
