Hundreds of cars get flat tyres after truck spills scrap metal
Hundreds of cars were left with flat tyres after a truck travelling along one of Australia's busiest highways spilled 750kg (1,653lb) of sharp metal shards on the road.
The truck travelled for 30km (18 miles) before the scrap metal spillage was detected, authorities said.
The incident forced city-bound lanes to close for hours on Friday, with the debris damaging the tyres of at least 300 cars.
Some emergency vehicles also had their tyres shredded, New South Wales Rural Fire Service said.
"A truck lost a load of scrap metal around 5am this morning, causing extensive debris," the fire service said.
New South Wales state police said the incident occurred on the M1 Pacific Motorway near Ourimbah, north of Sydney. The stretch of motorway reopened on Friday afternoon, after being closed for 10 hours.
NJ Ashton, the company that owns the truck, apologised and said it was helping with the clean-up.
Authorities are using magnets to attract the metal.
"It's not just a case of getting a road sweeper out or guys and girls with brooms. We are using some magnetic devices. We are removing embedded metal in the highway itself. This takes a long time," state highway patrol commander Howard Collins told a press conference.
The M1 is a freight and commuter route that runs north of Sydney.
State roads minister Jenny Aitchison said the situation was "unprecedented".
"We are working with all of the resources of government and the private sector to do the clean-up," she said.
"It's like trying to hoover up the highway. It's very difficult."
The truck driver, a 46-year-old man, was cooperating with inquiries, police said.
"We're taking full responsibility for what's happened and are very sorry for any damage and disruption that's been caused," NJ Ashton said in a statement on its website.
"We still don't fully understand how this occurred."
Mr Collins said the truck had travelled over 30 km (18.64 miles) with debris falling from the back of the vehicle before the spillage was detected.
Up close with the 300 tonne driverless trucks
Crucial highway cut off as Australian floods worsen

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
11 hours ago
- Yahoo
Green Transformation Driven by Innovation: XCMG Showcases Green and Intelligent Equipment at 2025 DTT Australia
SYDNEY, June 6, 2025 /PRNewswire/ -- XCMG Machinery ("XCMG", SHE:000425) presented a grand lineup of intelligent and green construction machinery equipment at the 2025 National Diesel Dirt and Turf Expo (DTT 2025), Australia's largest construction machinery expo which opened on May 16 in Sydney. The 3-day trade show attracted 32,000 professional audiences. As a branch session of the 7th XCMG International Customer Festival, XCMG's exhibition featured latest equipment products that have been customized and upgraded based on the practical needs of customers in Australia. The upgraded XC968-EV electric loader features an enhanced battery management system, increasing charging efficiency by 20% compared to the previous generation. The XE215LC hybrid excavator specially customized for the Australian market features an upgraded hydraulic system that enables smoother motion and stable output even in high-temperature environments of 50 degrees Celsius. An engineering contractor from Brisbane commented after a test drive that "the handling (of XC968-EV electric loader) feels much better than I expected, especially the impressive precision of the controls." Another purchasing manager from a mining company in Perth expressed keen interest in the model as well: "This electric equipment would be very suitable for use in the confined environment of our mining site." The highlight of XCMG's 1,820-square-meter exhibition at DTT 2025 was undoubtedly the demonstration zone, transformed into a dynamic "construction machinery theme park." The XE19UE mini excavator equipped with low ground pressure tires worked flexibly on soft sandy ground. As a "protector of lawn," it reduces turf damage by 60 percent through optimized weight distribution, which impressed many local ranchers. XCMG's all-star road machinery has been a staple at the DTT show for five consecutive years whereas the forklifts made their debut at the exhibition for the first time. Featuring a modular battery design, XCB30 forklift delivers an impressive standby time of "1 hour of charging for 8 hours of operation," making it ideal for both indoor and outdoor transportation tasks in warehouses and agricultural operations across Australia. All of XCMG's products exhibited at DTT 2025 retained their diesel-powered versions, providing customers with more options to meet their diverse needs. XCMG has established a comprehensive and rapidly expanding dealer network across Australia, offering services, spare parts, and extensive support to meet the needs of the Australian industry. "XCMG Australia subsidiary has really been as kicked off over the last five years, and we've developed the whole range of equipment right through to excavators, loaders, skid steers, electric forklifts, diesel forklifts so a whole array of equipment for the Australian market under Australian certification and standards," said Roy Rossini, CBO of XCMG Mining Equipment Australia. "The DDT is a key platform for us, and we're looking forward to the growth in the future." Looking ahead, XCMG will continue to deepen the integration of R&D in Australia, Chinese intelligent manufacturing and global services to boost the green transformation and development of infrastructure in the Asia-Pacific region. View original content to download multimedia: SOURCE XCMG Machinery Sign in to access your portfolio
Yahoo
2 days ago
- Yahoo
Sad outback photo sparks warning to Aussie drivers over little-known road rule
An experienced outback traveller is urging Australian motorists to stay vigilant on rural roads, especially in regions with roaming livestock — highlighting not just the serious safety risks of animal collisions, but the potential legal consequences for drivers as well. Simon Christie is a well-respected voice in the 4WD and touring community in Australia and shared a disturbing example that highlights the dangers. A photo taken at the time of the incident shows a cow that was killed on an outback road northeast of Alice Springs, in the Northern Territory, after it was obscured by a cloud of dust created by a passing truck before it was ultimately hit by the driver of a ute. Simon snapped a photo of the collision aftermath when it happened last year but recently shared it with a caravanning community page online before describing the confronting scene to Yahoo News. "A truck was coming the opposite way, and a dual-cab ute was heading the same way as us, just in front. In the dust behind the truck, a cow suddenly stepped out onto the road," Simon said. "The ute had a proper steel bull bar fitted and was travelling at a safe speed, but it couldn't avoid the cow. It hit it head-on, and the impact instantly killed it. "The cow landed in the middle of the road, and the driver pulled over safely, and we were able to pull up behind them. Thankfully, they were medically fine, and the vehicle only had minor damage — it was completely driveable thanks to the bull bar." Simon said this reflects how conditions can change in an instant, especially on dark, outback roads, and it highlights the life-saving benefits of having a proper bull bar fitted. "We helped drag the cow off the road using a recovery chain attached to the back of my caravan, because leaving it on the road would have been incredibly dangerous — especially at night," he said. "Someone else could have hit it, including a semi-trailer, which could cause a major crash. Plus, the carcass could attract predators like foxes and dingoes, creating more road hazards." Simon, of 4WDTV, arrived at "just the right time to help" and was able to tow the animal off the road despite also towing a caravan himself. But, "incidents like this are actually quite common", and he encouraged drivers to be aware of how they can stay safe in the event of similar scenarios. Calls grow for total 4WD ban on Australian beaches Outback neighbours in bitter $400,000 battle over 28km fence Air crew makes exciting 'once-in-a-lifetime' discovery in outback "If someone hits livestock, and they're equipped and know what they're doing, moving the animal off the road is the right and responsible thing to do. A lot of four-wheel drivers carry recovery gear, like winches and drag chains, and can do it safely," he said. "Night-time adds to the risks — poor visibility makes it harder to spot animals. That's why our vehicles are fitted with steel bull bars and a lot of aftermarket lighting — front, side, and corner lighting. It's basically as close to daylight as we can make it." He said the overarching message is simple: be aware, understand the risks, and drive to the conditions. "If that means slowing down, then slow down," he said. "And if you need to drive at night, make sure your vehicle is properly equipped — bull bars and lighting are essential. Factory headlights alone aren't enough out here." It's also important to consider the legalities, Simon said, adding that in some states, if livestock is on a road and is hit, the driver may be liable for the animal's death — or vice versa. "If the road is fenced and the animal got through a broken gate or fence, the farmer might be liable. But on unfenced roads with cattle grids, like in the outback, it's your responsibility to drive with caution, the animals are allowed to roam," he said. Drivers "should absolutely report these incidents", either to local authorities or the nearest town. "That can help with insurance, too, and it makes sure others are aware of the hazard," Simon added. A spokesperson from the Everything Caravan and Camping group, who shared the photo initially, echoed Simon's plea. "The key message for caravan owners, and all travellers, is to stay vigilant, particularly in outback areas where conditions can change quickly and visibility can be poor," a spokesperson told Yahoo. "Hitting an animal can be tragic and extremely dangerous, not just for the driver but for anyone else on the road. "And while every incident is different, we always encourage travellers to act with care and responsibility. If it's safe and legal to do so, removing roadkill can help prevent further harm to others, as Simon and his team did in this case." Do you have a story tip? Email: newsroomau@ You can also follow us on Facebook, Instagram, TikTok, Twitter and YouTube.
Yahoo
2 days ago
- Yahoo
Tesla stock slumps as Musk ramps up attacks on Trump's 'big, beautiful' bill: 'KILL THE BILL'
Tesla (TSLA) stock slumped Wednesday in the immediate fallout of the very public policy blowout between President Trump and Tesla CEO Elon Musk, which Musk himself amped up on Wednesday. "Call your Senator, Call your Congressman, Bankrupting America is NOT ok! KILL the BILL," Musk posted on X, part of a furious two-day barrage. Musk added early Wednesday morning, "If the massive deficit spending continues, there will only be money for interest payments and nothing else!" The comments come after the one-time leader of the Department of Government Efficiency (DOGE) angrily posted on Tuesday, "I'm sorry, but I just can't stand it anymore. This massive, outrageous, pork-filled Congressional spending bill is a disgusting abomination," adding, "Shame on those" in the House who voted for it. Musk's rhetoric on Trump and the Republican-backed "big, beautiful bill" was ramping up recently with Musk's comments to "CBS News Sunday Morning" and hit detonation levels with Tuesday's post. DOGE itself has come under criticism for not producing the amount of budgetary cuts Musk touted it could find, and the cuts it has produced have been deeply unpopular. Musk's closeness to the Trump administration had been seen as a boon for Tesla, given its range of business with SpaceX and NASA and the regulatory levers NHTSA could pull with getting autonomous driving rules in place for Tesla's robotaxi testing. Read more: How to avoid the sticker shock on Tesla car insurance But demand weakness in the EU and recent protests at US Tesla showrooms have followed Musk's controversial foray into politics, causing some Tesla owners to become alienated by Musk, specifically by his right-leaning tendencies, DOGE, and outward support of President Trump. Tesla's big robotaxi test is slated for June 12 in Austin. Much of the company's value is tied to whether it can fully unlock autonomous driving for robotaxi purposes and individual owners. Meanwhile, Alphabet's (GOOG, GOOGL) Waymo continues to plow ahead and is essentially the leader in the space, accumulating 250,000 robotaxi trips per week. Also driving the news today is Tesla's bread-and-butter automotive business, where new sales reports from international regions have been mostly negative. A longtime bright spot, however, is Australia. Australian publication Drive reported that Tesla had 3,897 vehicle deliveries in May, its highest sales total in nearly a year. The refreshed Model Y powered those sales with 3,580 units sold, up 122.5% from a year ago, and total deliveries up 9.3%. Interestingly, Tesla's year-to-date sales are still down 48.2% in Australia. Model 3 sedan sales were down 83.8% in May. But May's strong sales of the updated Model Y may be an indicator of more positive news to come for the EV maker, which is still the top EV seller in the country. On the flip side, research firm New AutoMotive group reported that Tesla UK registrations in May tumbled 45% to 1,758 units. Meanwhile, overall UK car registrations rose 4.3%, and China rival BYD's sales more than doubled in May to 1,388 units, though both figures include gas-powered and hybrid autos. The UK's results follow the negative trends in Europe, where May sales in major regions like France, Sweden, Germany, Denmark, and Spain slumped lower. Only Norway and Austria saw Tesla sales gains in the month. Pras Subramanian is a reporter for Yahoo Finance. You can follow him on X and on Instagram. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data