Keep Your Nintendo Switch 2 Scratch-Free With Tempered Glass Screen Protectors for Just $5
If you've been lucky enough to get your hands on the new Nintendo Switch 2, Nintendo's latest hybrid console, then you'll want to be sure to keep it in tip-top shape. And one way to be sure of that is to protect the fancy new screen from scratches with a screen protector. It can be easy to overlook such a small item, but if something happens to the screen of your expensive new console, you'll regret not having one installed sooner. Especially because we've found a 3-pack of tempered glass screen protectors with a guiding frame for easy installation for just $5. All you have to do is enter code SWITCH2GO at checkout to score the deal.
Glass screen protectors are generally a better option than plastic ones because they're harder to scratch, and this ultra-cheap deal gives you three of them, each built from dual-tempered 9H glass, for half the usual cost, essentially bringing the price to under $2 each. Just be sure you don't remove the existing film that comes on the Nintendo Switch 2 screen. You can install your screen protector directly on top without affecting the performance. Be sure to use the guiding frame to make it easy. This screen protector also has a nano-oleophobic coating so smudges and grease won't cloud your display. And once you've gotten that taken care of, why not check out other nifty accessories you'll want for your new console?
Why this deal matters
The wildly popular Nintendo Switch 2 is expensive, and if something happens to your screen it may be a while before you can grab another one since stock remains slim in most places. This deal gets you a 3-pack of tempered glass screen protectors for 50% off when you use code SWITCH2GO at checkout, dropping the cost to only $5. It's a pretty cheap way to add an extra layer of protection to your new console.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
18 minutes ago
- Yahoo
Mig Flash V2 shown working on Nintendo Switch 2
When you buy through links on our articles, Future and its syndication partners may earn a commission. The MIG Flash (formerly MIG-Switch) flash cart has been demonstrated to be compatible with the Nintendo Switch 2, backed by a small teaser from the team at X and the official listing explicitly stating: "Compatible with Switch 2". The company hasn't detailed how they got the flash cart working despite initial failures, but a firmware update is the likely enabler. The MIG Flash was unveiled last year, serving as a flash cart that allows Nintendo Switch owners to play game backups from a microSD card. It effectively cosplays as an official Nintendo Switch game cartridge, tricking the console into recognizing and running dumped ROMs stored on the microSD card. Though intended for legitimate owners to easily maintain personal game backups, or for aspiring game developers hoping to make games for the Switch 2, the MIG Flash has, one way or another, found its way into the hands of pirates as well. While the MIG Flash was initially deemed incompatible at launch, it now seemingly works with the Switch 2, suggesting the team has somehow cracked Nintendo's built-in protections for the new system. In a recent demo on X, they managed to boot The Legend of Zelda: Echoes of Wisdom, directly from the MIG Flash, though the load time was painfully slow. Better yet, the company now advertises the MIG Flash V2 to be compatible with the Switch 2 on their official website, touting a seamless experience: "Simply plug & play!" This was likely achieved through a firmware update, allowing it to circumvent new checks introduced by Nintendo for the Switch 2 that prevented it from booting or loading games previously. Still, don't expect it to run backups for Switch 2 games as dumping those ROMs is currently not possible, not to mention the illegality of such an act. There have been whispers of a userland exploit on the Switch 2, but its functionality and scope are extremely limited. Let's address the elephant in the room. While the MIG Flash can theoretically enable pirates to play titles from the original Switch on Switch 2 hardware, it carries a very high risk of getting your console banned. Each Switch cartridge carries a unique identifier. Nintendo has sophisticated systems in place to detect if multiple consoles share the same cartridge ID and flag this as piracy, leading to an account ban, a console ban, or, at worst, a bricked console. Follow Tom's Hardware on Google News to get our up-to-date news, analysis, and reviews in your feeds. Make sure to click the Follow button.
Yahoo
19 minutes ago
- Yahoo
After just 12 days, Nintendo is already nuking Switch 2 console accounts for players caught using Mig Flash — popular cartridge allows Switch 1 games on the new console, but users say they're only using their own ROMs
When you buy through links on our articles, Future and its syndication partners may earn a commission. Various user reports suggest that Nintendo is actively issuing bans to Switch 2 consoles that have been used with the MIG Switch (now MIG Flash) flash cart. Several affected users have reached out on X (formerly Twitter) and Reddit, sharing accounts of their consoles being banned from using Nintendo's online services after using the device. Despite earlier reports suggesting otherwise, MIG Flash (formerly MIG-Switch) showcased Nintendo Switch 1 ROMs running on Switch 2 hardware. This functionality is believed to be achieved through a recent firmware update, which mitigated or bypassed whatever new security checks Nintendo introduced with its latest console. The MIG-Switch is a specialized, reprogrammable cartridge that's designed to mimic a real Nintendo Switch cartridge, but allows you to store your own game ROMs or backups on its microSD card. This essentially enables you to hold multiple game copies on a single cartridge, letting you conveniently switch between them with the help of a button. That being said, it isn't as simple as dumping pirated copies on a MIG-Switch and calling it a day since Nintendo has robust anti-piracy measures in place, often through unique cartridge identifiers. If two users attempt to play the same game online simultaneously using a single copy, Nintendo can flag this as piracy. As you can expect, this likely has led to many false positives, especially in the case of used cartridges. It appears the Switch 2 is even stricter on this front, as there are now widespread reports of users being banned even when using what they purport as their own legitimately dumped game ROMs on the MIG-Switch. While users' Nintendo accounts reportedly remain unaffected, their consoles are now blocked from accessing Nintendo's online services. That means saying goodbye to Mario Kart World, the eShop, YouTube, cloud saves, and the list goes on. Firmware updates are generally not encompassed by these restrictions, but we cannot say for sure without more verified cases. There is a chance Nintendo may reinstate these consoles, as they were most likely caused by the changes introduced with the latest MIG-Switch firmware, rather than users booting up pirated ROMs. Regardless, the MIG-Switch isn't a Nintendo-authorized accessory, meaning that the company likely has no legal obligation to reverse these bans. As a matter of fact, Nintendo's updated EULA reserves the right to effectively brick your console in case of unauthorized hardware/software modifications. Contacting Nintendo Support might prove worthwhile, but we won't hold our breaths on it. It isn't technically a $449 paper weight, as you can still play offline titles, but that's a major compromise given the Switch 2 has been available for less than two weeks. Given Nintendo's release cycle, users who upgrade once per generation and face a ban on their Switch 2 might have to forego online services for several years, depending on when the Switch 2's successor launches. Follow Tom's Hardware on Google News to get our up-to-date news, analysis, and reviews in your feeds. Make sure to click the Follow button.
Forbes
20 minutes ago
- Forbes
20 Expert Tips To Avoid Network Automation Pitfalls
Network automation offers the promise of greater efficiency, faster deployments and fewer manual errors—but it's not without its challenges. Many teams dive in with good intentions, only to encounter roadblocks that stall progress, introduce complexity or even create security gaps. The good news is that many common pitfalls are avoidable with the right planning, tools and processes. Below, members of Forbes Technology Council highlight mistakes they've seen in network automation efforts and share practical tips to help your team get it right from the start. A common network automation pitfall is automating without fully understanding existing network workflows. This can cause outages or security gaps. Teams can avoid these issues by documenting processes, validating configurations in a test environment, and involving network engineers early in automation planning. - Sai Shashank Rasamalla, American Express A common pitfall is automating without fully understanding the existing network architecture and dependencies. This can lead to unintended outages or security gaps that keep getting missed because there is no human intervention. - Venkata Thummala, Stanford Health Care Forbes Technology Council is an invitation-only community for world-class CIOs, CTOs and technology executives. Do I qualify? A common network automation pitfall is failing to document configuration changes in real time. This can lead to misconfigurations and delays in troubleshooting. IT teams can avoid this by using tools that automatically track and update network changes, ensuring visibility and control as automation scales. - Douglas Murray, Auvik A common network automation pitfall is ad hoc scripting without standardization. Ad hoc scripts solve short-term problems but create long-term complexity and fragility. Adopting infrastructure as code avoids this by enforcing version control and modularity and ensuring only authorized, trackable changes are deployed, bringing stability, security and team alignment. - Karan Alang, Versa Networks Inc. A common network automation pitfall is relying on code-heavy solutions that only a few engineers can maintain, limiting scalability and resilience. Embracing no-code automation allows more team members to build and manage workflows, reduces reliance on novice coding skills, and ensures consistent, scalable network operations. - Song Pang, NetBrain Technologies A common network automation pitfall is inadequate testing of scripts before deployment, potentially causing outages. To avoid this, teams should create a testing environment that mimics production, use version control for scripts, conduct code reviews, automate testing processes and implement gradual rollouts, like canary releases. Additionally, proper documentation and training on automation tools are needed. - Raghvendra Tripathi Here's one I've seen recently: the use of weak or recycled security keys during automated deployments. These systems often don't generate strong randomness, making networks vulnerable. Teams can avoid this by using secure key generators or hardware-based tools that ensure fresh, strong encryption keys every time. - Erick Grau, Chibitek A frequent pitfall is automating overly complex or poorly understood manual processes—essentially, 'paving the cowpath.' Teams create brittle automation, which is a nightmare to maintain. Avoid this by first standardizing and simplifying the target process. Then, automate in small, incremental, well-tested steps. Focus on foundational elements before tackling intricate workflows. - Ashish Bhardwaj, Google Automating outdated legacy networks is like racing with a cracked engine. Without modern foundations, automation amplifies fragility and will lead to further complexities later on. Standardizing configurations and leveraging AI-driven workflows by upgrading ineffective systems will build resilient and intelligent networks. - Savinay Berry, OpenText One network automation pitfall is to simply automate a bad process; it just fails faster. Automation requires rethinking—not just for today, but for tomorrow—in a new, inventive way to anticipate technology growth and changes so that solutions stay relevant longer. - Pam Brodsack, Velera A common network automation pitfall is inadequate data backup verification. Many teams automate backups but don't periodically validate their integrity or restorability—until disaster strikes. Implement regular automated test restorations alongside your backup routines to verify that data can actually be recovered. This ensures your backups will work when really needed. - Chongwei Chen, DataNumen, Inc. A common network automation pitfall is alert overload from static, context-poor data. To avoid this, teams should integrate rich telemetry with AI-driven analysis to provide contextual, actionable alerts. This reduces noise and makes the process of identifying the root cause more streamlined, which ultimately supports more effective and efficient automation. - Judit Sharon, OnPage Corporation One common network automation pitfall is ignoring cross-team collaboration. When networking, security and operations teams work in silos, automation efforts often conflict or fail. To avoid this, build cross-functional workflows early on, ensuring alignment, shared goals and integrated feedback loops for smooth execution. - Rishi Kumar, MatchingFit One of the most frequent mistakes in network automation is rushing to automate processes without a structured plan. Teams often deploy automation tools haphazardly—scripting repetitive tasks or adopting orchestration platforms without evaluating long-term scalability, security or operational dependencies. - Pratik Badri, JPMorgan Chase & Co A common pitfall in network automation is a disconnect among processes, people and technology. Successful implementation requires these elements to work in harmony. Over-automation can alienate those who struggle to keep pace with rapid tech changes. Processes should be designed with adaptability and leverage technology when appropriate, not be dictated by it. - Hari Sonnenahalli, NTT Data Business Solutions Config drift is a major pitfall—manually applied changes bypass automation, causing inconsistencies. Modern teams avoid this by implementing strict automation-only policies, using tools like GitOps for infrastructure as code, and integrating validation checks that detect manual changes. Treating configs as immutable through CI/CD pipelines ensures all changes are tracked and reversible. - Anuj Tyagi One common pitfall is neglecting decommissioning. Automation excels at spinning up, but stale configs, orphaned services and zombie routes linger. Teams must automate clean-up, too—expiry policies, lifecycle hooks and teardown scripts ensure networks stay lean, secure and scalable. Don't just build—declutter. - Roman Vinogradov, Improvado Overlooking scalability is a frequent network automation pitfall; solutions that work for small environments may fail as networks grow. Teams can avoid this by designing automation with scalability in mind from the outset—using modular, reusable code and regularly reviewing automation tools to ensure they can handle increased complexity and volume as the organization expands. - Pradeep Kumar Muthukamatchi, Microsoft A common pitfall in network automation is treating it as tactical 'patchwork' rather than strategic orchestration. Many organizations automate isolated tasks without considering how those actions fit into the broader operational value chain, leading to fragmented solutions. To avoid this, step back and assess the entire operational workflow—identify dependencies, control points and outcomes. - Anil Pantangi, Capgemini America Inc. Skipping rigorous validation is a top network automation pitfall; a single typo or misconfiguration deployed at scale can cascade into massive outages. To prevent this, teams should embed pre- and post-change checks using network simulators, peer-reviewed scripts, automated verification tests and enforced rollback logic, ensuring errors are caught and reversed before they spread. - Sai Sandeep Ogety,
