SAGA Metals Mobilizes and Commences Summer Work Programs at Recently Drilled 100% Owned Radar Titanium Property in Labrador, Canada & Provides Corporate Update
VANCOUVER, British Columbia, June 26, 2025 (GLOBE NEWSWIRE) — SAGA Metals Corp. ('SAGA' or the 'Company') (TSXV: SAGA) (OTCQB: SAGMF) (FSE: 20H), a North American exploration company focused on critical mineral discovery, is pleased to announce the mobilization and commencement of its 2025 summer field program at the 100% owned Radar Titanium Property (the 'Property') in Labrador, Canada.
Field crews arrived on site on June 17 and have initiated ground-based geophysical surveys targeting future high-priority drill targets. Concurrently, the team is constructing an access trail along the full 20 km strike extent of the Dykes River Intrusion oxide layering zone. Mobilizing drill rigs to the Trapper Zone is a first construction priority (see Figure 1 below).
The road and trail construction aims to provide direct access to both the eastern Hawkeye Zone and the western extent of the Trapper Zone. This strategic roadwork will significantly enhance logistical efficiency and exploration capacity across the entire 20 km oxide layering zone.
Figure 1:
Detail of the Radar Titanium Project showcasing the road network from the Hawkeye Zone to the Trapper Zone and location of SAGA's 2025 field programs.
SAGA's field team is actively clearing overgrown sections of the historic forestry road to enable access for trucks and heavy equipment to the western areas of the Property. The program began with a 6-tonne excavator, while a larger 25-tonne unit is currently in transit and will be used to complete the remaining clearing work. Once operational, the 25-tonne excavator will also be deployed to construct a new access trail extending from the northwest end of the Trapper Zone, following the oxide layering zone southward before turning east toward the western anomalies within the Hawkeye Zone. This strategically designed, drill-compatible trail is a key component of SAGA's infrastructure development, enabling efficient mobilization of diamond drilling equipment to high-priority targets and supporting cost-effective execution of future drilling campaigns.
Figure 2:
SAGA's field team utilizes a 6-tonne excavator to clear the old forestry road that runs east-west within the Radar project
Magnetic and Electromagnetic (EM) Survey over the 'Trapper Zone'
As previously reported, targeted VLF-EM (Very Low Frequency electromagnetic survey) and magnetic surveys from Q4 2024 successfully defined drill targets for our maiden drill program over the Hawkeye zone. Now, our crews are targeting the Trapper zone that returned one of the highest responses in the regional airborne magnetic survey. SAGA has mobilized two geophysical crews to ensure complete survey coverage across the Trapper Zone within the next four weeks. Planned is a highly detailed magnetic and VLF-EM-survey over the northern anomaly of the Trapper zone.
Due to the strength of the magnetic anomaly detected over the Trapper zone, SAGA's geological team has had to continually recalibrate the geophysics instruments. To mitigate this, the Company has mobilized an additional instrument and expanded the team with two more personnel.
The survey employs a 25-meter station spacing along lines separated by 50 meters, allowing for detailed mapping of magnetic and conductive features associated with magnetite mineralization. This high-resolution approach is critical for accurately defining subsurface targets and enhancing confidence in drill planning for this promising western extension. The ultimate objective is to develop a magnetic inversion model—comparable to that successfully used at Hawkeye—to guide follow-up drilling along the broader 20-kilometre oxide layering trend.
Figure 3:
SAGA's field team conducting the magnetic and electromagnetic survey, including Very Low Frequency (VLF-EM) on the Radar Titanium Project
Michael Garagan, CGO & Director of SAGA, comments: '
We are fortunate to have exceptional infrastructure at the Radar Titanium project. The ability to complete low-cost maintenance on the forestry road and access trail into the Trapper zone will only further enhance the cost-effectiveness of future programs, adding tremendous value to shareholders. We are excited to have two teams conducting geophysics over the Trapper zone, with interpretations expected by mid-summer. As I previously mentioned, early indications suggest the Trapper zone contains some of the strongest magnetic anomalies, and we'll be utilizing the magnetic inversions to delineate drill targets similar to the Hawkeye Zone.'
Figure 4:
Radar Property map, depicting aeromagnetic anomalies, oxide layering and the site of the 2025 drill program. The Property is well serviced by road access and is conveniently located near the town of Cartwright, Labrador. A compilation of historical aeromagnetic anomalies is shown. SAGA has demonstrated the reliability of the regional airborne magnetic surveys after ground-truthing and drilling in the 2024 and 2025 field programs.
Radar Ti-V-Fe Project Overview:
The Company's 100%-owned Radar Property is located 10 km from the coastal city of Cartwright, Labrador, benefiting from tremendous infrastructure, including road access, deep-water port, airstrip and nearby hydro-electric power. The Radar Property comprises 24,175 hectares and entirely encloses the Dykes River intrusive complex, mapped at 160 km² on the surface.
The Dykes River intrusive complex is a recently recognized Mesoproterozoic layered mafic intrusion (Gower, 2017). It has gained attention due geological similarities to large AMCG-type intrusions and a very extensive titanium–vanadium–iron (Ti-V-Fe) rich layer.
Radar Ti-V-Fe Project 2025 Winter Drill Program Highlights:
(Click
here
to see SAGA's news release dated May 5, 2025 for full information on holes HEZ-01 & HEZ-04,
here
to see SAGA's news release dated May 26, 2025 for full information on holes HEZ-05 & HEZ-07 and
here
to see SAGA's news release dated May 29, 2025 for full information on holes HEZ-06, HEZ-02 & HEZ-03)
Engaged Alphabridge Group Inc. for Equity Research Coverage
The Company has engaged Alphabridge Group Inc. ('Alphabridge') to provide equity research coverage on the Company for an initial term of one year, beginning on June 25, 2025. Total consideration payable to Alphabridge is $15,000 plus GST. Alphabridge services will be provided via its principal Vasant Jain, based out of Vancouver, BC. Alphabridge and its principal are arm's length to the Company, and to the knowledge of the Company hold no securities of the Company as of the date hereof.
Qualified Person
Paul J. McGuigan, P. Geo., is an Independent Qualified Person as defined under National Instrument 43-101 and has reviewed and approved the technical information related to the Radar Ti-V-Fe Project disclosed in this news release.
About SAGA Metals Corp.
SAGA Metals Corp. is a North American mining company focused on the exploration and discovery of critical minerals that support the global transition to green energy. The Company's flagship asset, the Double Mer Uranium Project, is located in Labrador, Canada, covering 25,600 hectares. This project features uranium radiometrics that highlight an 18km east-west trend, with a confirmed 14km section producing samples as high as 0.428% U3O8 and uranium uranophane was identified in several areas of highest radiometric response (2024 Double Mer Technical Report).
In addition to its uranium focus, SAGA owns the Legacy Lithium Property in Quebec's Eeyou Istchee James Bay region. This project, developed in partnership with Rio Tinto, has been expanded through the acquisition of the Amirault Lithium Project. Together, these properties cover 65,849 hectares and share significant geological continuity with other major players in the area, including Rio Tinto, Winsome Resources, Azimut Exploration, and Loyal Lithium.
SAGA also holds additional exploration assets in Labrador, where the company is focused on discovering titanium, vanadium, and iron ore. With a portfolio that spans key minerals crucial to the green energy transition, SAGA is strategically positioned to play an essential role in the clean energy future.
On Behalf of the Board of Directors
Mike Stier, Chief Executive Officer
For more information, contact:
SAGA Metals Corp.
Investor Relations
Tel: +1 (778) 930-1321
Email:
info@sagametals.com
www.sagametals.com
Neither the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Disclaimer
This news release contains forward-looking statements within the meaning of applicable securities laws that are not historical facts. Forward-looking statements are often identified by terms such as 'will', 'may', 'should', 'anticipates', 'expects', 'believes', and similar expressions or the negative of these words or other comparable terminology. All statements other than statements of historical fact, included in this release are forward-looking statements that involve risks and uncertainties. In particular, this news release contains forward-looking information pertaining to the exploration of the Company's Radar Project and engagement of Alphabridge for equity research coverage. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company's expectations include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage, risks and uncertainties involved in the mineral exploration and development industry, and the risks detailed in the Company's continuous disclosure filings with securities regulations from time to time, available under its SEDAR+ profile at
www.sedarplus.ca
. The reader is cautioned that assumptions used in the preparation of any forward-looking information may prove to be incorrect. Events or circumstances may cause actual results to differ materially from those predicted, as a result of numerous known and unknown risks, uncertainties, and other factors, many of which are beyond the control of the Company. The reader is cautioned not to place undue reliance on any forward-looking information. Such information, although considered reasonable by management at the time of preparation, may prove to be incorrect and actual results may differ materially from those anticipated. Forward-looking statements contained in this news release are expressly qualified by this cautionary statement. The forward-looking statements contained in this news release are made as of the date of this news release and the Company will update or revise publicly any of the included forward-looking statements only as expressly required by applicable law.
Figures accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/2eb3b876-a32a-4368-9ef8-720dbe25a86e
https://www.globenewswire.com/NewsRoom/AttachmentNg/1fff0845-d761-439e-9e00-2e08b50d6fb4
https://www.globenewswire.com/NewsRoom/AttachmentNg/67f8e3d8-49c6-4ff3-8a83-e47ebd9d2558
https://www.globenewswire.com/NewsRoom/AttachmentNg/5514e271-097c-4aa2-80b3-32cafac1966f
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Business Wire
32 minutes ago
- Business Wire
Edgewater Wireless Wins Strategic Federal Grant for Advanced Wi-Fi Chip Commercialization
OTTAWA, Ontario--(BUSINESS WIRE)--Edgewater Wireless Systems Inc. (TSXV: YFI) (OTC: KPIFF), the industry pioneer in Wi-Fi Spectrum Slicing technology, is proud to announce it has been awarded $921,000 in non-dilutive funding from FABrIC, the Government of Canada's flagship initiative to commercialize advanced semiconductor and sensor solutions. The strategic investment serves as a powerful catalyst for Edgewater's $2.4 million development project, accelerating the time to market for its next-generation multi-link Wi-Fi silicon platform. This technology is poised to transform high-density, interference-sensitive wireless environments across residential, enterprise, and industrial IoT sectors. Edgewater Wireless Wins Strategic Federal Grant to Accelerate Commercialization of Next-Gen Wi-Fi Chip Edgewater Wireless has secured ~$1 million in non-dilutive funding from FABrIC—Canada's flagship semiconductor commercialization initiative Share 'In today's complex geopolitical environment, semiconductor innovation has become a strategic national priority,' said Andrew Skafel, President and CEO of Edgewater Wireless. 'The FABrIC funding reinforces Canada's commitment to strengthening its position in the global technology landscape. For Edgewater, it means accelerating our product roadmap, creating jobs, delivering shareholder value, and contributing to Canada's economic resilience.' 'The Canadian semiconductor ecosystem is energized. Semiconductors are embedded in almost every aspect of daily life, and the sectors that power our economy depend on them. From sensors that detect subtle but significant health changes to complex hardware accelerators and optimized chips that run increasingly complex AI algorithms, semiconductor technology is crucial,' stated Lynn McNeil, Vice President of FABrIC. 'The semiconductor supply chain is one of the world's largest and most complicated. It draws on highly specialized materials, components, manufacturing equipment, expertise, and processes to design, fabricate, assemble, package, and test finished chips. For a country like Canada, with unique expertise in photonics, MEMS, compound semiconductors and quantum technologies, it is a rich and varied supply chain we can flourish in.' 1 The strategic initiative, targeting Edgewater's next-generation Wi-Fi baseband, is designed to address real-world performance limitations in critical residential, enterprise and IoT deployments. The project will run through December 2026 and is expected to reach TRL 6+, bolstering Canada's vision to build domestic strength in advanced semiconductor design and manufacturing. Mandated to secure Canada's future in semiconductors. FABrIC lowers barriers faced by Canadian companies developing semiconductor manufacturing processes and internet-connected products and services for export into global markets. Focused on four core technologies: quantum, photonics, compound semiconductors and MEMS, it offers targeted funding for both Fabrication Process and Product development. FABrIC forcefully connects the semiconductor sector into Canada's major industrial performers: from the auto sector to mining, natural resources, agriculture, MedTech, aerospace, defence, and advanced manufacturing. As change and uncertainty rip through global trade relationships, forging these connections is increasingly integral to protecting the ability of these critical Canadian industries to innovate and compete. Launched in 2024, FABrIC is a five-year, $223M project to build the national ecosystem. By fostering collaboration between industry, not-for-profits, the post-secondary community, and government, it accelerates commercialization, amplifies our competitive advantages, and maximizes the economic impact of Canada's semiconductor sector. Domestically and internationally. Edgewater Wireless, a FABrIC member, is proud to lead this project as part of Canada's growing network of semiconductor innovators working to transform global communications and connectivity challenges into competitive advantages. Edgewater invites partners, investors, and industry peers to learn more about how Spectrum Slicing is solving the challenges of high-density wireless environments by visiting: CMC Microsystems ( Founded in 1983, CMC Microsystems (CMC) has been instrumental to the success of Canada's semiconductor industry. Over the decades, its highly regarded training programs have fortified the pipeline of HQPs that are the bedrock of market success. It has established cost-effective access to the sophisticated tools and technologies essential for academic research, R&D and emerging companies. During the era of globalization and subsequent fab and foundry consolidation, it negotiated critical manufacturing agreements that enabled emerging Canadian companies to prototype and test their products. As the significance of domestic semiconductor capacity to high-performance 21st century economies clarified in the early 2020s; a new round of industrial change ignited. Fabs, foundries and other nodes across the supply chain began expanding their footprints and seeking new partnerships. In Canada, CMC Microsystems was selected by the federal government to steward a new initiative to ensure the semiconductor sector is prepared to capitalize on evolving opportunities: FABrIC. About FABrIC: ( Canada's Semiconductor Ecosystem. Accelerated. Mandated to secure Canada's future in semiconductors. FABrIC lowers barriers faced by Canadian companies developing semiconductor manufacturing processes and internet-connected products and services for export into global markets. Focused on four core technologies: quantum, photonics, compound semiconductors and MEMS, it offers targeted funding for Fabrication Process and Product Development. Its training, IP registry and repository, design and prototyping services and Quantum Readiness programs support innovation and revitalize the domestic ecosystem. FABrIC forcefully connects the semiconductor sector into Canada's major industrial performers: advanced manufacturing, agriculture, aerospace & defence, the auto sector, cleantech, MedTech and mining & natural resources to amplify this country's economic performance. Launched in 2024, FABrIC is a five-year, $223M project funded by the Government of Canada. About Edgewater Wireless We make Wi-Fi. Better. Edgewater Wireless is redefining Wi-Fi from the silicon up—delivering standards-leading innovations that create strategic value for next-generation connectivity platforms and semiconductor licensing partners. With 26 granted patents and a fabless business model, Edgewater Wireless pioneered Wi-Fi Spectrum Slicing, a breakthrough technology purpose-built to address the surging global demand for higher-capacity, lower-latency wireless networks. Edgewater is supercharging the economics of Wi-Fi. At a time when incremental performance gains are no longer enough, Spectrum Slicing offers a transformative leap: enabling multiple concurrent channels within a single frequency band. The result— 10x or greater performance and 50% lower latency—benefits all devices, including legacy hardware, without requiring changes to the client side. This architecture delivers scalable, infrastructure-friendly gains across residential, enterprise, and IoT environments. Our technology is deeply aligned with the evolving standards and shaped by collaboration with Tier-one service providers, enterprises and industry bodies. Forward-Looking Statements This news release contains forward-looking statements and forward-looking information within the meaning of applicable securities laws. The use of any of the words "expect", "anticipate", "continue", "estimate", "objective", "ongoing", "may", "will", "project", "should", "believe", "plans", "intends" and similar expressions are intended to identify forward-looking information or statements. Although Edgewater Wireless believes that the expectations and assumptions on which such forward-looking statements and information are based are reasonable, undue reliance should not be placed on the forward-looking statements and information because Edgewater Wireless can give no assurance that they will prove to be correct. By its nature, such forward-looking information is subject to various risks and uncertainties, which could cause Edgewater Wireless' actual results and experience to differ materially from the anticipated results or expectations expressed. These risks and uncertainties, include, but are not limited to access to capital markets, market forces, competition from new and existing companies and regulatory conditions. Readers are cautioned not to place undue reliance on this forward-looking information, which is given as of the date it is expressed in this news release or otherwise, and to not use future-oriented information or financial outlooks for anything other than their intended purpose. Edgewater Wireless undertakes no obligation to update publicly or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.
Yahoo
32 minutes ago
- Yahoo
Ethereum ETF Momentum Drives Whale Interest in Meme Coin Little Pepe (LILPEPE) Ahead of Stage 4 Presale Jump
DUBAI, United Arab Emirates, June 26, 2025 (GLOBE NEWSWIRE) -- As excitement builds around the Ethereum ETF buzz, smart money is pouring into promising altcoins—and Little Pepe (LILPEPE) is catching the attention of whale wallets. With Stage 3 of its presale nearly 93% complete and over $2.33 million raised, LILPEPE is quickly emerging as a top contender in the meme coin space. Backed by an Ethereum-compatible Layer 2 blockchain, the project offers real utility beyond the hype, positioning itself for a strong price surge as it heads into Stage 4. While most meme tokens are still chasing whatever's trending, LILPEPE is putting down real roots. It's creating the kind of infrastructure that could actually shift the direction of the space, and somehow, it's still trading for less than $0.002 in its presale. A Meme Coin That's Actually Building Something What sets LILPEPE apart is that it's not just living on someone else's chain. It's gone a step further and built its own custom Layer-2 blockchain—something rarely seen in the meme coin scene. Most projects just stick their token on Solana or BNB Chain and call it a day. But LILPEPE actually went for the tough stuff—like fixing insane gas fees, slow transactions, and the fact that a lot of communities have zero real protection. A Meme Coin with Real Tech The Little Pepe chain's fully EVM-compatible, so it works straight out of the box with usual wallets, dApps, and tools. No weird steps, no messing around—just a meme coin that actually took the time to build something smoother and way more user-friendly. The chain's actually built with meme projects in mind—it's not just some repurposed tech. It comes with zero trading taxes, sniper bot protection, and lightning-fast transactions, which is a huge deal if ever been rugged or stuck waiting forever on a slow chain. This isn't just some surface-level hype or flashy graphics—it's actual tech built with meme culture at the core. One of the best parts is a launchpad made to give new meme tokens a safe space to launch—just a cleaner way to get started. And they're just getting started—staking, community voting through a DAO, and even NFT integration are all lined up next. It's turning into a full ecosystem, not just another hype token. Presale Picking Up Serious Steam LILPEPE's presale is heating up fast. The early stages have sold out rapidly, raising $500,000 in Stage 1 (at $0.001 per token) and $1.325 million in Stage 2 (at $0.0011). Now in Stage 3, tokens are priced at $0.0012, and over $2.33 million has already been raised, with more than 93% of this stage completed. The presale follows a tiered pricing model meaning early buyers lock in lower prices while supporting the ongoing development of LILPEPE's Ethereum-compatible Layer-2 network. The next stage will increase the token price to $0.0013, continuing the momentum ahead of its public launch. Getting in on the presale is super simple. LILPEPE tokens can be purchased using ETH or USDT (ERC-20) directly from supported wallets such as MetaMask or Trust Wallet. For those new to crypto, there's also an option to buy using a credit or debit card. It's important to note that USDT transactions still require a small amount of ETH in the wallet to cover gas fees. A Token Setup Built to Last LILPEPE's token supply is actually thought out, not just thrown together. There's a hard cap of 100 billion tokens, with 26.5 billion set aside for the presale. The rest is split across different parts of the project—13.5 billion for staking rewards, 10 billion for liquidity, 30 billion held in reserve for the chain, and 20 billion saved for marketing and future listings on decentralized exchanges. And here's a big plus—there are zero buy or sell taxes, so it's clean and fair whether holding or trading. The tokenomics are crafted not only to reward early holders but also to ensure sustainable growth through community incentives, ecosystem scaling, and utility integrations planned on the roadmap. What makes it even better is that Little Pepe's chain is fully EVM-compatible. That means it works seamlessly with popular wallets, dApps, and crypto tools—no complicated setups or extra steps. It's designed specifically for meme projects and the roadmap includes upcoming features like DAO governance, an NFT marketplace and creator tools that support community-driven development. About Little Pepe: Little Pepe ($LILPEPE) is a next-generation meme coin built for the community, by the community. Inspired by crypto culture's favorite frog, Little Pepe combines viral meme energy with real utility, launching on a fast, secure Layer 2 blockchain to ensure low fees and high scalability. With over $2.3 million raised in its presale, a growing army of holders, and a transparent roadmap, Little Pepe is more than just a meme—it's a movement. For more information about Little Pepe, visit the links below: Website: Twitter/X: Telegram: Contact Details: COO - James Stephen media@ Disclaimer This content is provided by Little Pepe. The statements, views, and opinions expressed in this content are solely those of the content provider and do not necessarily reflect the views of this media platform or its publisher. We do not endorse, verify, or guarantee the accuracy, completeness, or reliability of any information presented. This content is for informational purposes only and should not be considered financial, investment, or trading advice. Investing in crypto and mining-related opportunities involves significant risks, including the potential loss of capital. Readers are strongly encouraged to conduct their own research and consult with a qualified financial advisor before making any investment decisions. However, due to the inherently speculative nature of the blockchain sector—including cryptocurrency, NFTs, and mining—complete accuracy cannot always be guaranteed. Neither the media platform nor the publisher shall be held responsible for any fraudulent activities, misrepresentations, or financial losses arising from the content of this press release. Globenewswire does not endorse any content on this page. Legal Disclaimer: This media platform provides the content of this article on an "as-is" basis, without any warranties or representations of any kind, express or implied. We assume no responsibility for any inaccuracies, errors, or omissions. We do not assume any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information presented herein. Any concerns, complaints, or copyright issues related to this article should be directed to the content provider mentioned above. A photo accompanying this announcement is available at in to access your portfolio
Business Wire
42 minutes ago
- Business Wire
A New Chapter Begins: Cross Management Corporation Joins Forces with Global Giant Shimizu
NEW YORK--(BUSINESS WIRE)-- Cross Management Corporation (CMC), a New York based general contractor with decades of experience specializing in interiors, infrastructure, building repositioning and retail, is proud to announce its acquisition of 51% by Shimizu Corporation ('Shimizu'), a $14 billion in revenue per year global construction company headquartered in Japan, through its North American regional managing corporation, Shimizu America, Inc. ('SAI'). "Joining the Shimizu family lets us expand our resources, embrace new technologies, and still deliver the craftsmanship and accountability we're known for." This strategic partnership marks a transformative chapter for CMC, bringing together its hands-on, client-first approach with Shimizu's scale, innovation, and international reach. While CMC will retain its leadership, team, and project-driven culture, the partnership strengthens its ability to take on larger, more complex projects without compromising the responsiveness and attention to detail clients have trusted since 2003. "Our commitment has always been about delivering superior construction services with a personal touch," said Ann Caruso, CEO of CMC. "Joining the Shimizu family lets us expand our resources, embrace new technologies, and still deliver the craftsmanship and accountability we're known for." CMC has also collaborated with Shimizu North America LLC ('SNA'), SAI's local subsidiary responsible for construction operations in North America, on multiple projects. The decision to bring CMC into the Shimizu Group aims to strengthen and expand their engagement in the alterations and interiors construction market, a growing sector in mature countries. While SNA has already been active in this market, its primary clients have traditionally consisted of Japanese companies. By integrating CMC into their group, SAI anticipates creating new business opportunities and expanding project acquisition by enhancing its connections with local clients. Shimizu selected CMC for its strong reputation as a leader in the U.S. interiors and alterations space, and for its values. Shimizu recognized in CMC a kindred spirit - one that prioritizes long-term relationships, integrity, and excellence in execution. The partnership represents a strategic step in expanding Shimizu's U.S. footprint, as the companies come together to deliver impactful projects and contribute meaningfully to the evolving landscape of the American construction industry. The move is part of Shimizu's SHIMZ VISION 2030, an initiative to grow its international footprint, with a goal of generating 25% of its gross profit from overseas. CMC will continue to operate under its existing name, with no changes to its core teams or client relationships. What clients will see, however, is access to broader capabilities, deeper support, and new opportunities as the company grows its reach throughout the U.S. About Cross Management Corporation Founded in 2003, Cross Management Corporation (CMC) is a New York-based general contractor specializing in interiors, infrastructure, building repositioning and retail. For over two decades, CMC has delivered superior construction management services throughout the United States, building its reputation on craftsmanship, integrity, and accountability to ensure exceptional quality and seamless communication in every project. For more information, visit About Shimizu America, Inc. For half a century since their entry into the US market in Los Angeles in 1974, Shimizu has been supported by many clients in developing their business in North America. Currently, with the regional management company Shimizu America Inc. based in Atlanta, Georgia, the company is engaging in construction, plant engineering, investment and development businesses in the U.S. as well as in Mexico and Canada.
