CORRECTION FROM SOURCE: General Atomics Acquires North Point Defense
Change: The first sentence of the second paragraph has been removed.
SAN DIEGO, CALIFORNIA / ACCESS Newswire / March 3, 2025 / General Atomics (GA) today announced the strategic acquisition of North Point Defense, Inc. (NPD), a leading provider of Signals Intelligence (SIGINT) exploitation software and sensor integration, by General Atomics Integrated Intelligence, Inc. (GA-III), formerly known as General Atomics Commonwealth Computer Research, Inc. This acquisition enhances GA's capabilities in the rapidly evolving SIGINT field, positioning the company to deliver advanced ISR solutions for air, sea, ground, and space platforms.
From concept to deployment, NPD delivers AI/ML-based autonomous signal processing and data dissemination solutions providing real-time actionable intelligence, supporting tactical and national mission priorities. 'Joining GA represents an incredible opportunity to enhance our impact in delivering cutting-edge SIGINT solutions in support of national and tactical users,' said Bruce Benenati, President of NPD. 'As part of a mission-focused organization with a proven track-record in tactical intelligence across the DoD and IC, we can accelerate innovation and deployment at scale. The integration gives our team access to unmatched operational expertise, resources, and a broader customer base. Together, we are poised to deliver even greater capabilities to those who depend on us in the field.'
GA-III is committed to providing a comprehensive suite of 'out-of-the-box' hardware and software tools to meet mission requirements and expand the innovative intelligence capabilities within the GA group of companies. 'The integration of NPD technologies into a division of GA-III is a strategic shift, enhancing GA's ability to innovate rapidly and provide greater value to customers with end-to-end ISR solutions that are more efficient, effective, and technologically advanced.' said Brian Ralston, President of GA-III.
Baird served as the exclusive financial adviser and Miles & Stockbridge acted as legal counsel to North Point Defense on the transaction.
About General Atomics and General Atomics Integrated Intelligence
General Atomics is a defense and diversified technologies company, founded in 1955 as a division of General Dynamics and acquired by the Blue family in 1986. GA and affiliates operate on five continents, and produce unmanned aircraft and airborne sensor systems, satellite surveillance, high power laser, hypervelocity projectile, and power conversion systems. GA is a leader in nuclear fusion research, next-generation nuclear fission and advanced materials technologies. The company occupies 8+ million square feet of engineering, laboratory and manufacturing facilities and comprises over 13,000 employees.
GA-III's capabilities include spatio-temporal data management, advanced analytics, visualization tools, and computer vision, alongside AI/ML-enabled automated target recognition services. These capabilities support a wide range of national, tactical, and commercial/international applications, leveraging both commercial cloud and edge-based computing solutions and are fully integrated with GA Aeronautical Systems' unmanned aircraft and airborne sensor systems.
# # #
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
7 hours ago
- Yahoo
Earnings To Watch: G-III (GIII) Reports Q1 Results Tomorrow
Fashion conglomerate G-III (NASDAQ:GIII) will be announcing earnings results tomorrow before market open. Here's what to look for. G-III beat analysts' revenue expectations by 4% last quarter, reporting revenues of $839.5 million, up 9.8% year on year. It was a mixed quarter for the company, with a solid beat of analysts' adjusted operating income estimates but a miss of analysts' Wholesale revenue estimates. Is G-III a buy or sell going into earnings? Read our full analysis here, it's free. This quarter, analysts are expecting G-III's revenue to decline 4.8% year on year to $580.3 million, a deceleration from its flat revenue in the same quarter last year. Adjusted earnings are expected to come in at $0.13 per share. Analysts covering the company have generally reconfirmed their estimates over the last 30 days, suggesting they anticipate the business to stay the course heading into earnings. Looking at G-III's peers in the apparel and accessories segment, some have already reported their Q1 results, giving us a hint as to what we can expect. ThredUp delivered year-on-year revenue growth of 10.5%, beating analysts' expectations by 4.4%, and Figs reported revenues up 4.7%, topping estimates by 4.8%. ThredUp traded up 48.1% following the results while Figs was down 1.7%. Read our full analysis of ThredUp's results here and Figs's results here. There has been positive sentiment among investors in the apparel and accessories segment, with share prices up 3.8% on average over the last month. G-III is up 9.1% during the same time and is heading into earnings with an average analyst price target of $30 (compared to the current share price of $28.40). Today's young investors likely haven't read the timeless lessons in Gorilla Game: Picking Winners In High Technology because it was written more than 20 years ago when Microsoft and Apple were first establishing their supremacy. But if we apply the same principles, then enterprise software stocks leveraging their own generative AI capabilities may well be the Gorillas of the future. So, in that spirit, we are excited to present our Special Free Report on a profitable, fast-growing enterprise software stock that is already riding the automation wave and looking to catch the generative AI next. Sign in to access your portfolio
Yahoo
15 hours ago
- Yahoo
Lexus future models – 2025-2035
In 2023 it was 824,258. In 2024 a total of 851,214 Lexus vehicles were delivered worldwide. Both are typical Toyota Motor Company totals, the numbers being consecutive record results, yet there was no crowing. Very TMC. Profit over volume, always. Lexus' boss never mentions one million cars, MPVs and SUVs in a calendar year yet that will surely be an internal target. Perhaps by 2030? Possibly sooner, thanks to at long last, official plans for production in China. In 2024 the brand sold 181,906 vehicles, its best result yet. Each was imported, attracting duty. Something which neither Lexus nor its parent feels any need to talk about. A fully-owned factory TMC has waited and watched and now it is finally ready to manufacture locally. Unusually, this will be a TMC-owned plant, not a JV. Which could well explain why it has taken so long. Perhaps we will never know what went on behind the scenes for possibly years to get approvals from all relevant parties. Only Honda and Tesla have ever been allowed to erect a factory outside the convention of the usual joint venture arrangements. It will be no great surprise if the first car to be made in Shanghai (the announcement came during the media preview of that city's motor show in April) is the future ES. Project XZ20 Revealed at the same event, though previously teased as the LS-ZC concept, this model is still a year away ('mid-2026' TMC stated in April). Which explains why the existing ES had another facelift only six months ago, premiering at Auto Guangzhou. ES generation eight will have TMC's tried and tested GA-K platform. And the fact that the PRC will be the number one market was clear to see when dimensions of the prototype were published. It is to be 5,140 mm from bumper to bumper. Greatly extended length Local buyers will have been telling dealers they wanted an extended wheelbase car. Instead, the next ES will be 165 mm longer, canny Toyota standardising one body and saving itself money. And keeping loyal owners happy. The wheelbase is 2,950 mm. The life cycle should be back to five, possibly six years (generation seven debuted in 2018) and there will be three variants, none of which is to be a plug-in hybrid. Instead, two HEVs and two EVs, as follows: ES 300h, FWD (145 kW system output) & AWD (148 kW), 2.0-litre ES 350h, FWD & AWD (182 kW for both), 2.5-litre ES 350e, FWD (165 kW) ES 500e, AWD (252 kW in total from two motors) Build in the US and Japan again too? While we do know a fair bit about project XZ20, it is unclear what happens to US production, presently at the giant Georgetown complex. Build of XZ10 (generation seven) is due to end there later in 2025 and Donald Trump's tariffs will be causing all sorts of issues for TMC, North America being the other key region for the ES. Another long-lived model due to be retired is the far older RC. Build will be wound up in November, Lexus stated in January. There will not be a direct replacement. Over the last eleven years, around 80,000 units have been sold but in recent times volume has slowed to a trickle and the final edition is limited to just 200 cars. Some believe that the LC is also doomed but more likely is that it has a facelift in 2026 and then discontinued in 2029 or 2030. And still with two-door cars, will there finally be a follow-up to the legendary LFA? Some believe so, and that it will be powered by a biturbo V8, the three-letter name rumoured to be LFR. A big electric SUV in 2027? Come 2027 and another electric car should be entering production, though this has been delayed a little. Heralded by the LF-ZL concept from the 2023 Tokyo motor show, it will feature prismatic battery cells and a promised range of up to 1,000 kilometres. The architecture is to be EV-native. As HZ 300e, HZ 450e and HZ 550e have been trademarked, these could be variant names for the production model previewed by the LF-ZL. TZ is another possibility though this might instead be a three-row EV linked to the next Highlander. A new generation of this big Toyota SUV is due within the next twelve months, so it would be 2027 for the related Lexus. When is the next RZ? A follow-up to the latest RZ should be launched in 2028. A facelift for the existing generation of this electrified SUV premiered at the Brussels motor show in March. Of interest is a simulated eight-speed manual gearbox for synthetic shifting with the resultant noises broadcast into the cabin. A steering yoke is also new for the restyled RZ, while this will be one of the first cars to be sold in Europe with steer-by-wire. Variants are RZ 350e (167 kW and 269 Nm, FWD), RZ 500e (280 kW from two motors, replaces RZ 450e) and RZ 550e F-Sport (300 kW). A 77 kWh (gross) battery is standard. The Lexus powered by a diesel V8 Generation four of the LX, which is the Land Cruiser's twin, hits mid-life towards the end of 2025 so we should expect a facelift. An Overtrail (new grade for all three variants) and an LX 700h (3.5-litre biturbo V6 and ten-speed auto) are the most recent additions. Premiering at AutoGuangzhou in November 2024, these joined the LX 600 and LX 500d. Many do not realise that Lexus still offers diesel power in any vehicle, though it is restricted to certain countries. The next LX probably won't arrive until the early 2030s so there will more than likely be a second facelift in 2028. Fresh (i.e. more economical and with fewer emissions) engines will inevitably be added at this time. LBX generation two: decade-end debut? At the other end of the size scale, the LBX (code: AY10), will turn two in December. It continues to be manufactured only in Japan and is mainly for that market plus Europe. Front- and all-wheel drive - the platform is GA-B - it isn't due for a refresh until 2027. The replacement should arrive in 2030. Finally, the LM, Lexus' MPV/minivan. Volume is small but pricing is incredibly high. It does brisk business in Greater China and has some success as a high-end hotel shuttle in certain - mainly European - countries too. A facelift for the current AW10 series vehicle will almost certainly be seen first for the first time at the next edition of Auto Shanghai in April 2027. The third generation should then be launched in 2030 and will likely be bigger or offered in LWB form too: AW10 isn't the right size for the North American market."Lexus future models – 2025-2035" was originally created and published by Just Auto, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
a day ago
- Yahoo
BPC Instruments receives orders from KU Leuven valued at 0.7 MSEK
LUND, Sweden, June 4, 2025 /PRNewswire/ -- BPC Instruments AB (publ) ("BPC") announces orders from KU Leuven university in Belgium. The orders include the delivery of several instruments, including Gas Endeavour® III systems, with a combined value of approximately 0.7 MSEK. CEO Dr. Jing Liu comments: "We are pleased to receive a significant order from a globally recognised research institution. KU Leuven's decision to transition to our technology confirms the value and reliability of our instruments in advanced scientific applications." BPC has received orders from university KU Leuven in Belgium. The value of the orders amounts to approximately 0.7 MSEK and includes several instruments including Gas Endeavour® III. The university is replacing and upgrading its setup for biochemical methane potential (BMP) testing with BPC's instruments for both batch and continuous measurements. The new systems are expected to streamline workflows and provide more precise and reliable data in research related to biological and biochemical gas processes. Revenue from these orders is expected to be recognised in Q2 2025. About Gas Endeavour® III Gas Endeavour® III is an advanced laboratory instrument platform designed for precise evaluation of gas production or consumption measurements in both batch and continuous processes. With its fully automated operation, an intuitive user interface, and high reliability, it offers exceptional ease of use. The system is available with 18 or 9 parallel channels, allowing for the simultaneous evaluation of multiple samples. For more information about Gas Endeavour® III, visit the Gas Endeavour® III product page or contact the sales team at sales@ For more information, please contact: Dr. Jing Liu, CEOBPC Instruments AB Tel: +46 (0) 46 16 39 51 E-mail: ir@ About BPC Instruments AB BPC Instruments is a global Swedish-based pioneering technology company developing and offering analytical instruments enabling more efficient, reliable, and higher quality research and analysis for industries in renewable bioenergy and environmental biotechnology. The result is not only higher accuracy and precision, but also a significant reduction in time consumption and labor requirement for performing analysis. BPC Instruments' innovative products offer high-quality hardware and software based on deep knowledge and experience of target applications. The solutions are the first of their kind, making the company a pioneer in its field. Today, BPC Instruments exports to nearly 80 countries around the world. BPC is listed on the Spotlight Stock Market in Sweden. For more information, please visit BPC's webpage: This information was brought to you by Cision The following files are available for download: Press release - KU Leuven View original content:
