Why do dwarf galaxies line up? 'Zippers' and 'twisters' in the early universe may solve a galactic mystery
When you buy through links on our articles, Future and its syndication partners may earn a commission.
Structures known as "zippers" and "twisters" in the early universe may explain why dwarf galaxies tend to line up with each other, as well as hint at how dark matter operates in the universe.
Every major galaxy like the Milky Way has a retinue of smaller dwarf galaxies orbiting it. The Milky Way has several dozen, including the famous Large and Small Magellanic clouds. Beginning in the 1970s, astronomers noticed that these dwarf galaxies' positions and orbits weren't entirely random. Instead, dwarf galaxies tended to exist within the same plane. For example, the 11 brightest satellites of the Milky Way share a plane, and many dwarf galaxies around the Andromeda galaxy form what is known as the Great Plane of Andromeda.
When confronted with an observational mystery like this, astronomers turn to computer simulations to try to understand what's going on. That's because we can see only a small fraction of all the matter in the cosmos — just the matter that emits light. The vast majority of the mass of every galaxy, both big and small, is in the form of mysterious, invisible dark matter.
We can't directly observe dark matter, so we must use the simulations to piece together what that major component is doing and how it affects the visible galaxies. But computer simulations have routinely found that dwarf galaxies are just scattered everywhere, rather than being arranged into particular planes.
Because alignments of dwarf galaxies appear to be common, the theory of galaxy formation is at odds with observations. In a paper submitted to The Astrophysical Journal in April, a team of researchers led by Janvi Madhani at Johns Hopkins University dug deeper into sophisticated simulations to see if they could crack the mystery.
The team studied the evolution of 12 simulated galaxies that were similar to the Milky Way, following the flows of dark matter and gas over billions of years. Galaxies do not spring up in an instant. Instead, they grow over time as filaments of matter pour onto them, like a giant cosmic umbilical cord.
And it's in these filaments that the researchers found how dwarf galaxies can align with each other. Previous research assumed that once dwarf galaxies formed, they would scatter into random orbits. But the new simulations followed the evolution of the gas to much greater resolution and precision, which allowed the researchers to forget assumptions and see what was actually happening.
Related: The faintest star system orbiting our Milky Way may be dominated by dark matter
The new study found that instead of scattering, the filaments can lock in with each other and enhance themselves. When they do this, they keep the dwarf galaxies confined to a single plane.
But the orientation of that plane depends on what happens to the filaments as new streams of gas connect to the same host galaxy. Sometimes, the filaments enhance each other, in what the researchers call a "zipper" — like the zipper merge you perform on a highway on-ramp. This creates a plane of gas that eventually evolves into a collection of dwarf galaxies.
Another case involves a "twister," which is when a new filament merges with an existing one with a lot of angular momentum. This shifts the position of the plane but otherwise keeps it intact.
But if too many filaments connect to the same galaxy, then any pattern is destroyed and dwarf galaxies get random orbits.
Overall, the researchers found that we should expect planes of dwarf galaxies in roughly half — and perhaps up to 70% — of galaxies like the Milky Way and Andromeda.
RELATED STORIES:
—How did Andromeda's dwarf galaxies form? Hubble Telescope finds more questions than answers
—Early galaxies were shaped like surfboards and pool noodles, James Webb Space Telescope finds
—James Webb Space Telescope reveals ancient galaxies were more structured than scientists thought
Based on this work, there doesn't appear to be any great tension between what we expect dark matter and gas to do when they build galaxies and what actually happens. So, although it doesn't reveal a crack in our understanding of cosmology, it does solve a decades-long problem in astronomy.
Astronomers are especially interested in galaxy formation, especially in the early universe. Recently, the James Webb Space Telescope revealed rather mature galaxies appearing at surprisingly early times. Those galaxies could point the way to a new cosmological paradigm, or they might just be the result of a different kind of zipper-and-twister dance. Only more observations and better simulations will tell us.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
25 minutes ago
- Yahoo
Why does NASA's Perseverance rover keep taking pictures of this maze on Mars?
When you buy through links on our articles, Future and its syndication partners may earn a commission. If you've spent any time perusing the carousel of raw images from NASA's Perseverance Mars rover, you might have stumbled across an odd subject: a tiny, intricate maze etched into a small plate, photographed over and over again. Why is the Perseverance rover so obsessed with this little labyrinth? It turns out the maze is a calibration target — one of 10 for Perseverance's Scanning Habitable Environments with Raman & Luminescence for Organics and Chemicals instrument, otherwise known for its fun acronym, SHERLOC. This Sherlock Holmes–inspired tool is designed to detect organic compounds and other minerals on Mars that could indicate signs of ancient microbial life. To do that accurately, the system must be carefully calibrated, and that's where the maze comes in. Located on the rover's seven-foot (2.1-meter) robotic arm, SHERLOC uses spectroscopic techniques — specifically Raman and fluorescence spectroscopy — to analyze Martian rocks. In order to ensure accurate measurements, it must routinely calibrate its tools using a set of reference materials with specific properties. These are mounted on a plate attached to the front of the rover's body: the SHERLOC Calibration Target. "The calibration targets serve multiple purposes, which primarily include refining the SHERLOC wavelength calibration, calibrating the SHERLOC laser scanner mirror, and monitoring the focus and state of health of the laser," Kyle Uckert, deputy principal investigator for SHERLOC at NASA's Jet Propulsion Laboratory, tells The target is arranged in two rows, each populated with small patches of carefully selected materials. The top row includes three critical calibration materials: aluminum gallium nitride (AlGaN) on sapphire discs; the UV-scattering material Diffusil; and Martian meteorite SaU008, whose mineral makeup is already known and helps align wavelength calibration with real Martian geology. This is also where you'll find the maze. Why a maze? "SHERLOC is all about solving puzzles, and what better puzzle than a maze!" says Uckert. The purpose of the maze target is to calibrate the positioning of the laser scanner mirror and characterize the laser's focus, which requires a target with sharply contrasting spectral responses. The maze serves this purpose well." The maze is made of chrome-plated lines just 200 microns thick (about twice the width of a human hair) printed onto silica glass. "There are no repeating patterns and the spectrum of the chrome plating is distinct from the underlying silica glass," says Uckert. That makes it possible to measure the laser's focus and accuracy with extreme precision. If you look closely at the maze, you'll also notice a Sherlock Holmes portrait right at the center. While it's a cheeky nod to the instrument's name, it serves a practical function. "SHERLOC spectral maps can resolve the 200 micron thick chrome plated lines and the 50 micron thick silhouette of Sherlock Holmes at the center of the maze," Uckert notes. Like the portrait, the bottom half of the SHERLOC Calibration Target also serves a dual purpose: spectral instrument calibration and spacesuit material testing. It contains five samples of materials used in modern spacesuits, including some materials you might be familiar with, like Teflon, Gore-Tex, and Kevlar. And don't miss the "fun" target in this row — there's a geocache marker backing a polycarbonate target, and it does indeed have a tie-in to Sherlock Holmes. RELATED STORIES: — Perseverance rover's Mars samples show traces of ancient water, but NASA needs them on Earth to seek signs of life — Perseverance Mars rover finds 'one-of-a-kind treasure' on Red Planet's Silver Mountain — Perseverance Mars rover becomes 1st spacecraft to spot auroras from the surface of another world These materials are actively being tested under Mars conditions to determine how they hold up over time in situ, which is crucial for planning human exploration of the Red Planet. "Note that we use all of these materials to fine-tune SHERLOC," adds Uckert. "As a bonus, the spacesuit materials support unique science that will help keep future astronauts safe." Now, if all these Sherlock Holmes–related Easter eggs on the SHERLOC Calibration Target aren't enough for you, there's one final link. SHERLOC has a color camera as part of its instrumentation suite that sometimes images the target, and it's called the Wide Angle Topographic Sensor for Operations and eNgineering. Yes, SHERLOC's sidekick is called WATSON.
Yahoo
4 hours ago
- Yahoo
New Research: Childhood Vaccination Rates Drop Across 1,600 U.S. Counties
Childhood vaccination rates have markedly declined across the U.S. since the start of COVID, according to new Johns Hopkins University research showing 78% of more than 2,000 counties reported drops and the average immunization rate had fallen to 91% — further below the 95% threshold needed for herd immunity While existing Centers for Disease Control and Prevention data has historically shown broadly declining measles-mumps-rubella vaccination rates at the state and national levels, the county-level analysis published this week in JAMA is far more granular. Get stories like this delivered straight to your inbox. Sign up for The 74 Newsletter It provides a 'better understanding of these pockets where you have more exceptionally high risk,' said senior author Lauren Gardner, the director of Johns Hopkins University's Center for Systems Science and Engineering. 'Knowing where there are problem areas,' she added, 'gives policymakers and public health professionals locations to target their limited resources to try and improve vaccination coverage and therefore minimize the potential risk of measles outbreaks.' The country is currently experiencing a deadly measles outbreak that has infected over 1,000 people across 30 states and killed two unvaccinated children. Case numbers this year have already surpassed 2024's total and mark the second-highest number of confirmed cases in a year since the disease was declared eradicated in the U.S. in 2000. Some 96% of reported infections have involved a person who was unvaccinated or whose status was unknown and 13% have resulted in hospitalization. Related Gardner, who also led the data collection efforts behind Johns Hopkins' COVID-19 dashboard, and her team collected county-level, two-dose MMR vaccine rates for kindergarteners from each state's department of health website from 2017 to 2024, where available. Ultimately, they were able to analyze trends in 2,066 counties across 33 states and made all their data available to download. While state level average rates may decline by a few percentage points, the researchers found 130 counties where they dropped by at least 10 percentage points, and in 15 of those counties, they plummeted more than 20. Only four of the states studied — California, Connecticut, Maine and New York — reported an increase in the median county-level vaccination rate. They are currently the only four states that exclusively allow medical — and not philosophical or religious — exemptions to mandatory vaccines for school-aged children. Related Gardner said she pursued the county-level data after observing growing vaccine hesitancy and misinformation. Based on her years of work in the field, she said she was '100% expecting to see [these current outbreaks].' If vaccination rates continue to drop 'measles is likely to return to endemic levels in the US,' according to the Johns Hopkins' report — a concern other experts see as heightened by Robert F. Kennedy Jr. now heading the U.S. Department of Health & Human Services. A well-known vaccine skeptic, Kennedy initially downplayed the measles spread in late February and has been inconsistent in his support of the MMR vaccine. Related Under Kennedy's leadership, the Trump administration released the controversial 'Make America Healthy Again' report on May 22, which misinterpreted studies, cited ones that don't exist and is suspected of being generated in part by artificial intelligence. The report, which involved no pediatricians, questions the safety and importance of some childhood vaccines. 'Despite the growth of the childhood vaccine schedule,' the report reads, 'there has been limited scientific inquiry into the links between vaccines and chronic disease, the impacts of vaccine injury, and conflicts of interest in the development of the vaccine schedule.' Related Paul Offit, the director of the Vaccine Education Center at the Children's Hospital of Philadelphia and a professor of pediatrics at the University of Pennsylvania Perelman School of Medicine, pushed back on these assertions. The issue has been well studied, and there is no evidence of links between childhood vaccines and chronic diseases — including diabetes and autism — said Offit, who is also a voting member of the CDC's Advisory Committee on Immunization Practices. He referenced 24 studies across seven countries and three continents involving thousands of children that show they're at no greater risk of developing autism if they receive the MMR vaccine. Current skepticism is not isolated to the measles vaccine: The Food and Drug Administration, which falls under HHS, recently released updated guidance which no longer recommends the COVID vaccine for healthy children or pregnant women. In response, a top COVID vaccine adviser at the CDC resigned this week, according to reporting from The Washington Post. And across the country, numerous states have introduced legislation to loosen vaccine requirements for school-aged children, opening the door for more parents to opt their kids out. 'I think this is only going to get worse,' Offit said. 'I think vaccines are under attack. You have a secretary of Health and Human Services who will do everything he can during the years that he is in that position to make vaccines less available, less affordable and more feared. … So I think this is a dangerous time to be a child in the United States of America.'
Yahoo
8 hours ago
- Yahoo
Private Japanese spacecraft crashes into moon in 'hard landing,' ispace says
When you buy through links on our articles, Future and its syndication partners may earn a commission. A spacecraft from Japan attempting to make the country's first private moon landing on Thursday instead crashed into the lunar surface in a disappointing second failure for its ispace builders. The Japanese company's Resilience spacecraft aimed to make a soft touchdown in the Mare Frigoris ("Sea of Cold") region of the moon's near side today (June 5) at 3:17 p.m. EDT (1917 GMT; 4:17 a.m. on June 6 Japan Standard Time). But telemetry from the lander stopped one minute and 45 seconds before the scheduled touchdown, apparently due to an equipment malfunction. It was reminiscent of ispace's first lunar landing attempt, in April 2023. The spacecraft also went dark during that try, which was eventually declared a failure. "We wanted to make Mission 2 a success but unfortunately we were able to land," ispace founder and CEO Takeshi Hakamada told reporters in a press conference a few hours after the landing try. Preliminary data based on telemetry from Resilience's final moments suggest that the lander's laser rangefinder experienced some sort of delays while measuring the probe's distance to the lunar surface. "As a result, the lander was unable to decelerate sufficiently to reach the required speed for the planned lunar landing," ispace officials wrote in an update. "Based on these circumstances, it is currently assumed that the lander likely performed a hard landing on the lunar surface." A hard landing means Resilience hit the moon's surface faster than planned. It's unlikely it survived in any condition to proceed with its two-week mission, or deploy the small Tenacious rover built by the European Space Agency. "For those who have supported us, we'd really like to apologize," Hakamada said, adding that ispace is committed to learning from its failures for future flights. "We have to continue on our mission to have moon exploration by [the] Japanese." Resilience stood 7.5 feet (2.3 meters) tall and weighs about 2,200 pounds (1,000 kilograms) when fully fueled. It's the second of ispace's Hakuto-R lunar landers, which explains the name of its current flight: Hakuto-R Mission 2. Hakuto is a white rabbit in Japanese mythology. The ispace folks first used the name for their entry in the Google Lunar X Prize, which offered $20 million to the first private team to soft-land a probe on the moon and have it accomplish some basic exploration tasks. The Prize ended in 2018 without a winner, but ispace carried on with its lunar hardware and ambitions. (The "R" in Hakuto-R stands for "reboot.") The company made big strides on Hakuto-R Mission 1, which successfully reached lunar orbit in March 2023. But that spacecraft couldn't stick the landing; it crashed after its altitude sensor got confused by the rim of a lunar crater, which it mistook for the surrounding lunar surface. ispace folded the lessons learned into Hakuto-R Mission 2, which launched on Jan. 15 atop a SpaceX Falcon 9 rocket from Florida's Space Coast. That was a moon-mission twofer for SpaceX: Resilience shared the rocket with Blue Ghost, a robotic lander built and operated by the Texas company Firefly Aerospace that carried 10 scientific instruments for NASA via the agency's Commercial Lunar Payload Services (CLPS) program. Blue Ghost arrived in orbit around the moon on Feb. 13 and landed successfully on March 2, pulling off the second-ever soft lunar touchdown by a private spacecraft. That mission went well from start to finish; the solar-powered Blue Ghost operated on the moon for two weeks as planned, finally going dark on March 16 after the sun set over its landing site. Resilience took a longer, more energy-efficient path to the moon, which featured a close flyby of Earth's nearest neighbor on Feb. 14. The lander arrived in lunar orbit as planned on May 6, then performed a series of maneuvers to shift into a circular path just 62 miles (100 kilometers) above the surface. That set the stage for Thursday's action. Resilience used a series of thruster burns to descend, decelerate and steer its way toward a landing in Mare Frigoris, a vast basaltic plain that lies about 56 degrees north of the lunar equator. But something went wrong when Resilience was just 192 meters above the lunar surface. It's not clear if Resilience was moving faster than expected because of the laser rangefinder data lag, or if that data lag was caused by the probe moving faster than planned, ispace said. "First, we have to figure out the root cause for the phenomenon we observed, and then we have to utilize them into Mission 3 and Mission 4," Hakamada said. If Resilience had succeeded today, it would be just the second soft lunar touchdown for Japan; its national space agency, JAXA, put the SLIM ("Smart Lander for Investigating Moon') spacecraft down safely in January 2024. Today's landing attempt was part of a wave of private lunar exploration, which kicked off with Israel's Beresheet lander mission in 2019. Beresheet failed during its touchdown try, just as ispace's first mission did two years ago. Pittsburgh-based Astrobotic had an abortive go in January 2024 with its Peregrine lunar lander, which suffered a crippling fuel leak shortly after launch and ended up crashing back to Earth. A month later, Houston company Intuitive Machines made history with its Odysseus craft, which touched down near the lunar south pole. Odysseus tipped over shortly after touchdown but continued operating for about a week. Its successor, named Athena, also toppled during its lunar touchdown on March 6 — just four days after Blue Ghost hit the gray dirt — with more serious consequences: The probe went dark within a few short hours. Peregrine, Blue Ghost, Odysseus and Athena all carried NASA science payloads. They were supported by the agency's CLPS program, which aims to gather cost-efficient science data ahead of crewed Artemis moon landings, the first of which is slated for 2027. Resilience carried five payloads, but they don't belong to NASA; Hakuto-R Mission 2 is not a CLPS effort. Three of these five are pieces of science gear that aim to help human exploration of the moon: a deep-space radiation probe developed by National Central University in Taiwan; a technology demonstration from the Japanese company Takasago Thermal Engineering Co. designed to produce hydrogen and oxygen from moon water; and an algae-growing experiment provided by Malaysia-based Euglena Co. (Algae could be an efficient food source for lunar settlers someday.) The other two payloads are a commemorative plate based on the "Charter of the Universal Century" from the Japanese sci-fi franchise Gundam and a tiny rover named Tenacious, which was built by ispace's Luxembourg-based subsidiary. Tenacious was designed to roll down onto the surface and collect a small amount of moon dirt, under a contract that ispace signed with NASA back in 2020. The rover carried a payload of its own — "Moonhouse," a tiny replica of a red-and-white Swedish house designed by artist Mikael Gensberg. The rover was supposed to lower the Moonhouse off its front bumper onto the lunar dirt, establishing a colorful artistic homestead in the stark gray landscape. None of that will come to pass, however, now that ispace has confirmed Resilience slammed into the lunar surfance instead of making a delicate four-point "soft landing." Related stories: — What's flying to the moon on ispace's Resilience lunar lander? — Japan's Resilience moon lander aces lunar flyby ahead of historic touchdown try (photo) — Japan's Resilience moon lander arrives in lunar orbit ahead of June 5 touchdown Despite the failed Resilience landing, ispace has big lunar goals. The company plans to launch two moon missions in 2027, Mission 3 and Mission 4, that will use a larger, more capable lander named Apex 1.0. That lander will weigh 2 tons, much larger than Resilience. "We know it's not going to be easy," ispace director and CFO Jumpei Nozaki said during the press conference. "But it's hard. It has some meaning and significance of trying." Nozaki said he and ispace felt extremely sorry to have disappointed the company's 80,000 supporters and stockholders, and were determined to learn from the experimence in the designs fo Mission 3 and Mission 4. Hakamada, when asked by a reporter if he or the team had cried after the failed landing, said it wasn't a time for crying. "Right now, we don't know the cause, so I can't get emotional and cry," he said. "I don't think that's a good idea. The most important thing is to find out the cause for this second failure." Editor's note: This story, originally posted at 5 p.m. ET, was updated at 9:30 p.m ET with new details from ispace's post landing attempt press conference. Editor-in-Chief Tariq Malik contributed to this report.
