I-69 ORX construction bringing long-term lane closure to US 60
HENDERSON, Ky. (WEHT) – Drivers on US 60 just east of Henderson will have to get used to more lane closures and a new traffic pattern as work continues on the future US 60/I-69 interchange. Beginning Saturday May 10, US 60 will be down to one shared lane between Tillman Bethel Road and Morris Drive, where two temporary traffic signals will be located to allow east and westbound traffic to flow.
Flags and crosses coming back to Central Park in Henderson
Drivers turning onto US 60 from Tillman Bethel will only be able to turn right. Those wanting to turn left will first need to loop through the new roundabouts to turn back around in the eastbound direction. Residents of the Hillcrest neighborhood will need to enter through Hillcrest Terrace as Morris Drive will remain closed.
Project spokesperson Mindy Peterson says this closure allows for a widening and realignment of the highway and a rehabbing of a CSX overpass bridge.
'For drivers who use US 60, just know it's going to look a little different,' explains Peterson. 'So, if US 60 is part of your route there, right at the new interchange, just plan ahead and know you're going to need a little more time.' Peterson says it may be a good idea for drivers to pass through the new interchange prior to the work-week rush. 'See what it feels like so that when you get to Monday morning and you're in the heat of your commute,' says Peterson, 'you know already what to expect.'
Peterson says one positive for drivers is that the Adams Lane bridge is expected to re-open to traffic by the end of this week. The bridge had been closed since last December as crews worked to replace the bridge over I-69.
The long-term closure along US 60 is expected to last around 45 days. Peterson expects construction on that particular section to wrap up in late June.
Copyright 2025 Nexstar Media, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed.
For the latest news, weather, sports, and streaming video, head to Eyewitness News (WEHT/WTVW).
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
15 minutes ago
- Yahoo
What Ever Happened to Carbureted Engines?
What happened to carbureted engines? Once the most popular option amongst classic car enthusiasts and garage mechanics everywhere, it's been a few decades since we last saw one, as they're now reduced to a nostalgic commodity in cars, though they do still exist on small engines, such as lawn mowers. Back in the good old days, however, carburetors were found on some of the most exciting classic sports cars, and they were a reasonable option for owners and drivers looking to wrench on their vehicles. If this method of fuel delivery was so beloved, why did it drop to the wayside? As the popularity of fuel injection grew, we started to see the end of mass-produced vehicles with carbureted engines. Carbs, while simpler to work on and maintain and also more affordable, had some unfortunate downsides compared to the newer tech of fuel injection. As RSP Motorsports points out, fuel injection offered better fuel economy as it could optimize fuel delivery based on real-time engine conditions, as opposed to the fixed jets of a carburetor. This was due in part to the rise of electronic control units (ECUs), which gave cars computers that could calculate and make adjustments — although they also added a layer of expense and complexity. Because of adjustable fuel delivery, fuel injection was also more efficient, providing a more precise air-fuel mixture that reduced emissions compared to carburetors. By the mid-1980s, we were nearing the end of the carbureted engines in everyday cars on U.S. production lines as the world witnessed the rise of fuel injection. Fuel injection may be more complex, but its benefits made it more marketable to some consumers. American car enthusiasts might remember the carburetor sitting under the hood of their sports car, but these systems weren't exclusive to the U.S. market. On the global market, carbureted engines had a longer life span for many automotive brands, according to the Ask Car Guys subreddit. These markets focused less on fuel economy and efficiency, and also didn't see the consequences of laws and regulations cracking down on emissions. European, Asian, and African car markets continued to see cars produced with carbureted engines into the mid-1990s. Just because they've been phased out of production doesn't mean people don't still love cars with carbureted engines. Without the need for complex electronics we have in today's modern cars, carb engines were much simpler to work on, as stated by — and, for many people, more enjoyable. You could work on your car in the garage without concern for complex ECUs, and they could be manually tuned and adjusted if you knew what you were doing, without the need for expensive, complicated software. Outside of simplicity, many fans of the carbureted engine just enjoy the engine sound and feel. They have a distinct sound, throttle response, and feel that is very dissimilar to cars we have in production today, making many people loyal to this now nostalgic form of fuel delivery. Carburetors were easy to make adjustments and tuning changes to, as they didn't require fancy computers and knowledge to figure out, but Electronics for Imaging (EFI) provided arguably smoother throttle response and wasn't as annoying to try to start on a cold day — a struggle anyone who has owned a carbureted car probably knows well after messing around with a manual choke on a cold winter day. Just because we don't see cars with carburetors coming off the assembly line doesn't mean they are off the road. Many car collectors and classic car enthusiasts still enjoy wrenching, owning, and driving carbureted cars today. They may be "gone," but they will never be forgotten — there will always be something tried and true about a carbureted engine that enthusiasts will always have an appreciation for.
Yahoo
36 minutes ago
- Yahoo
Driver hospitalized after Sandusky County crash: OSHP
SANDUSKY TOWNSHIP, Ohio (WJW) – The Ohio State Highway Patrol is investigating a two-vehicle crash in Sandusky County that sent one driver to the hospital with serious injuries on Saturday afternoon. The crash happened on U.S. 20 near County Road 128 just before 1:30 p.m. According to state troopers, a preliminary investigation revealed that a 2016 Honda Civic heading east on U.S. 20 moved into the right lane before going off the side of the road. Pink flamingo statue stolen from Parma's Quarry District The driver reportedly drove back onto the roadway before hitting the back of a 2021 Toyota Tacoma. The Honda then went off the right side of the road, struck a tree and overturned, according to the state patrol. The Toyota crossed into the westbound lanes and also overturned, investigators said. Man arrested after fatally stabbing roommate, injuring stepfather: Akron PD The Honda driver, identified as a 42-year-old Warren man, was seriously injured and taken to St. Vincent's hospital. The Toyota driver, a 47-year-old Fremont man, suffered minor injuries. Investigators said both drivers were wearing seatbelts at the time of the crash, which remains under investigation at this time. Copyright 2025 Nexstar Media, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed.
CBS News
36 minutes ago
- CBS News
Michigan nonprofit Wheels in Motion showcases adaptive adventures at Taylor car show
Organizers with Wheels in Motion say they had a successful car show extravaganza in Taylor on Saturday. CBS News Detroit spoke with Michigan State Police Detective Devin Kachar, who, three years ago, was shot multiple times and paralyzed while doing undercover surveillance in Detroit. "You can basically let it control you or get out and do what you can to control it and still get back into doing the things you love," Kachar said. He said making modifications to vehicles makes that possible. "You know it looks different, but there's still ways to do stuff you enjoy," he said. Many of the cars at Saturday's extravaganza have adaptations that make it possible for people with disabilities to drive them, which showcases the work that Wheels in Motion does — providing off-road adventures, handcycling and boating adventures in an adaptive way. "Essentially, it's just a mechanism that's used to operate the gas and brake via your hands. You basically just drive with your hands," Kachar said. Those mechanisms can vary depending on what a person needs to drive. "So that could be levers that could be different sorts of mechanisms depending on how your hands operate and kind of the function or strength you have in your upper body," Kachar said. He added that Saturday's event was the first for Wheels in Motion, but he hopes to see it come together year after year. "One of our main goals for the Wheels in Motion, especially with this event was to get as much people out here and understand what we do and how we do it, and we are trying to make a difference," Kachar said.
