logo
After its data was wiped, KiranaPro's co-founder cannot rule out an external hack

After its data was wiped, KiranaPro's co-founder cannot rule out an external hack

TechCrunch17 hours ago

Indian grocery delivery startup KiranaPro's recent data loss story has more holes than Swiss cheese, as the startup remains unclear whether the incident was an internal breach or an external hack.
Last week, the Bengaluru-based startup discovered that it could not access its back-end servers and that all its data, including its app code, had been deleted from GitHub. The startup on Friday blamed a former employee for the breach. However, in an interview, KiranaPro co-founder and CEO Deepak Ravindran conceded that the company had not deactivated the employee's account after they departed the company and cannot rule out the possibility of subsequent malicious misuse of their account.
'If we go deeper, we have to do a real forensic investigation. We are going to talk [about] this with our board, the investors, and we are going to get a formal opinion on that also with our legal advisers,' Ravindran told TechCrunch.
Earlier on Friday, Ravindran claimed in a post on X that the incident that affected its data was an internal breach.
'After careful investigation, we conclude that this was not a hack. No external party penetrated our ordering or payment systems, exploited vulnerabilities, or bypassed security protocols,' he wrote.
The co-founder also explicitly shared a screenshot of a LinkedIn profile of one of KiranaPro's former employees on X on Thursday, alleging that they had deleted the startup's code. (TechCrunch is not sharing the post's link, as the startup has yet to offer concrete proof supporting its position.)
'[T]his was an internal data breach. Specifically, it was the result of actions taken by a trusted internal employee who had legitimate access to our systems,' the co-founder wrote in his post on Friday. 'This individual intentionally deleted critical server logs while they were being tested and/or edited, an action that goes directly against our policies, our principles, and the trust we place in our team.'
When TechCrunch asked if KiranaPro could rule out whether any third party had maliciously gained access to the former employee's account, Ravindran could not.
'We have to do a complete forensic check on the company. We have to do the entire IP scan. We have to look at where the tracks happened. We have to check the computers, MacBooks, and whatever is used. Everything has to be done. Then we have to spend money … so, that's why we decided not to,' he told TechCrunch.
Then what was the basis of Ravindran's allegation? It was a GitHub response, a copy of which he shared with TechCrunch.
The response included a username, which Ravindran said was associated with the former employee.
'All we have is the emails that we got from GitHub, stating that [the former employee's username] as an individual is the one who deleted the account. We haven't done the investigation further,' Ravindran told TechCrunch.
Former employee's account was never offboarded
Launched in late 2024, KiranaPro operates as a buyer app on the Indian government's Open Network for Digital Commerce. The startup allows more than 55,000 customers in 50 cities to purchase groceries from their local shops and nearby supermarkets using its voice-based interface. The company also supports local language inputs, including English, Hindi, Malayalam, and Tamil.
Ravindran stated that they decided to call out the former employee based on the company's 'belief system,' as they claim the former employee deleted the data after their sudden termination.
However, the startup said it is not aware if there were enough protections on the former employee's devices, such as multi-factor authentication, to restrict malicious third-party access, like malware.
The company confirmed it did not remove the employee's access to its data and GitHub account following his departure.
'Employee offboarding was not being handled properly because there was no full-time HR,' KiranaPro's chief technology officer, Saurav Kumar, confirmed to TechCrunch.
Company restores AWS account and GitHub data
Alongside its code saved in GitHub, KiranaPro also lost access to its Amazon Web Services (AWS) account, which included its customer data and their transaction details.
Ravindran told TechCrunch that the GitHub data was restored after getting its backup from one of their employees. The startup also regained access to its AWS account along with its customer data.
Both the co-founder and CTO said the AWS account was protected by multi-factor authentication, but neither could say how the account was accessed, as nobody else had physical access to Ravindran's phone, which generates the multi-factor code.
Nonetheless, Ravindran claimed that the customer data stored in the AWS cloud remained intact and was not accessed by any third parties, nor was it downloaded by the former employee in question.
'Because if that is the case, I will get its notification on email or anything [sic],' he said.
That said, Ravindran stated that the startup has enough evidence to file a formal complaint with the police, but said that its investigation is ongoing.
The startup has also not fully paid its current employees, the company's co-founder confirmed, soon after the company raised a seed round of ₹100 million Indian rupees (about $1.2 million), which Ravindran said has yet to be fully wired.
The startup counts Blume Ventures, Unpopular Ventures, and Turbostart among its institutional venture backers, as well as Olympic medalist PV Sindhu and Boston Consulting Group managing director Vikas Taneja among its angel investors. It has 15 employees located in Bengaluru and Kerala.

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

How to transfer data from Nintendo Switch to Switch 2
How to transfer data from Nintendo Switch to Switch 2

Yahoo

time11 minutes ago

  • Yahoo

How to transfer data from Nintendo Switch to Switch 2

When you buy through links on our articles, Future and its syndication partners may earn a commission. If you've upgraded to the Nintendo Switch 2, you'll probably want to bring over your game saves, user profiles, and digital purchases from your original Switch. Thankfully, Nintendo has made it really straightforward to transfer data between consoles, but there are a few steps you'll need to follow carefully during initial set up, to avoid losing your progress. Nintendo provides a built-in transfer tool that takes the hassle out of starting over. With just a few steps, you can move your entire digital library — from save files to purchased games — directly to your new Switch 2. Your profiles come along too, so you can jump back into your favorite titles without missing a beat. Here's everything you need to know to successfully move your data from Switch to Switch 2. Mumba Blade Series Case: Now that you've got your hands on a Switch 2, keep your hands on it with the ergonomic grip provided by a Blade case from Mumba. The one-piece design is solidly built, protecting your Switch from drops and providing a precise fit for your Joy-Cons. This case is compatible with every kind of Switch, so you can protect your whole line, from the OG to the OLED to the latest and Deal (Image: © Tom's Guide) Once you've followed the previous steps in the Switch 2 set-up process, you'll be asked if you wish to transfer data from your original switch. To do this, select "Start System Transfer" to get things started. It's important to note that if you have a microSD memory card, you can insert it to store data for downloadable software, screenshots, etc. Only microSD Express cards featuring logos labeled "Express" or "EX" are supported. Other SD cards won't work. (Image: © Tom's Guide) Next, you'll have to sign into your Nintendo Account. Using your phone or tablet, scan the QR code that pops up on the screen to sign in. After that, enter the code you see on your mobile device on the Switch 2's display. If successful, your profile (avatar) will appear on the screen. Click OK to confirm your sign-in. (Image: © Tom's Guide) Next, move the Switch 2 and Switch 1 close together to transfer data. You'll have to connect each system's respective AC adapters to start downloading data. Using a different USB-C power delivery method won't work. You have to use the AC adapters that came with both Nintendo consoles. (Image: © Tom's Guide) On your old Switch, click on the gear icon on the main menu. After that, scroll down to System. On the following menu, scroll down to "System Transfer to Nintendo Switch 2" and click on it. This will start the transferring process. This process will vary depending on the amount of data you're transferring, so keep that in mind. (Image: © Tom's Guide) If you've followed all the steps above correctly, you should be all set! Click on OK to finish. After this, you'll see various pages explaining all of the Switch 2's different play modes. You can select your preferred play mode, such as handheld or docked mode. Note that it may take some time for all your games to download and install, so make sure your Switch 2 remains connected to the internet. Now that the Nintendo Switch 2 is rolling out to gamers, we're putting together more guides to help you make the most of Nintendo's latest console. Stay tuned for more tips coming soon!

How to connect Nintendo Switch 2 to your TV or monitor
How to connect Nintendo Switch 2 to your TV or monitor

Yahoo

time12 minutes ago

  • Yahoo

How to connect Nintendo Switch 2 to your TV or monitor

When you buy through links on our articles, Future and its syndication partners may earn a commission. The Nintendo Switch 2 might be designed for portable gaming, but its real magic happens when you connect it to your TV or monitor for the full big-screen experience. Maybe you're settling in for a marathon Mario Kart World gaming session, or simply want to show off your skills. Docking your Switch 2 transforms it from a handheld device into a proper home console. The setup process is refreshingly simple, requiring just a few cable connections and the included dock. Nintendo has streamlined the entire experience to get you gaming on the big screen as quickly as possible. Follow these simple steps and you'll have your Switch 2 connected and displaying games on the big screen in just a few minutes. (Image: © Tom's Guide) Take off the back panel of the Switch 2 dock by pulling it back from the top. This reveals all the connection ports you'll need for setup. Keep the panel somewhere safe while you're connecting cables, as you'll need to put it back on later. (Image: © Tom's Guide) Plug one end of an HDMI cable into the middle port on the dock (it's clearly marked and sits between the other two ports). Then connect the other end to any available HDMI input on your TV or monitor. Make sure both connections are secure and remember which HDMI input you're using so you can select it later. (Image: © Tom's Guide) Plug the Nintendo Switch 2 power adapter into the dock's power port, then connect the other end to a wall outlet. For best results, use only the official Nintendo power adapter that came with your Switch 2. (Image: © Tom's Guide) Position the dock on a stable, flat surface near your TV where it won't get knocked over. It's also a good idea to ensure there's adequate ventilation around the dock as it will generate heat during your gaming sessions. (Image: © Tom's Guide) Gently slide your Nintendo Switch 2 into the dock with the screen facing the same direction as the dock's front opening. Turn on your TV or monitor and use your remote to select the HDMI input you connected earlier. Your Switch 2 will automatically detect the connection and switch to docked mode for big-screen gaming. Now sit back and enjoy your games with improved resolution and performance on the big screen! Now you've learned how to connect your Nintendo Switch 2 to your TV monitor, why not take a look at our other useful Switch 2 guides? If you're unboxing, check out how to set up a Nintendo Switch 2. If you have a first generation console and are looking to transfer over your data, we can help you with that too.

Lee Jae-myung, Trump speak on phone, reaffirm U.S.-South Korea alliance
Lee Jae-myung, Trump speak on phone, reaffirm U.S.-South Korea alliance

Yahoo

time44 minutes ago

  • Yahoo

Lee Jae-myung, Trump speak on phone, reaffirm U.S.-South Korea alliance

June 7 (UPI) -- South Korea's President Lee Jae-myung spoke for the first time with U.S. President Donald Trump late Friday as both leaders agreed to further strengthen their nations' alliance. Lee, who took office Wednesday, talked with Trump in a 20-minute phone call, according to the presidential office of South Korea. The White House has not confirmed the conversation, and the president, who is in New Jersey this weekend, hasn't posted about the call on Truth Social. The two presidents agreed to strive toward reaching a mutually acceptable trade agreement, including on tariffs. Trump has imposed 10% baseline tariffs on most trading partners. On April 2, Trump said the Republic of Korea would face a 49% duty but one week later he paused it for three months along with the other worst offenders in the trade imbalance. South Korea's tariffs on imported agricultural goods average 54%. Trump congratulated Lee on his election victory, and the new leader expressed his gratitude, according to the office. Lee noted the importance of the alliance, which forms the foundation of Seoul's diplomacy. The phone call was "conducted in a friendly and candid atmosphere," as they shared anecdotes and experiences from their election campaigns, according to South Korea's presidential office. They exchanged views on their assassination attempts last year and political challenges, in addition to discussing their their golf skills and agreed to play a round together. Trump invited Lee to the White House and the Group of Seven summit in Alberta, Canada, from June 15-17. South Korea is not a G7 member state, but the nation attended them group's meetings in 2021 and 2023. Korea's neighbor, Japan, is a member of the G7. Yonhap reported the South Korea government is in consultations for Japanese Prime Minister Shigeru Ishiba and Chinese President Xi Jinping to speak to their leader. It has not been decided whether Lee will attend the North Atlantic Treaty Organization leaders' summit in the Netherlands on June 24 and 25, according to the presidential office. Lee, the Democratic Party liberal candidate, won in a landslide over Kim Moon-soo of the conservative People Power Party. He was inaugurated the next day on Wednesday. South Koreans turned out in record numbers in a snap election triggered by the impeachment and removal of Yoon Suk Yeol in April after a botched martial law decree. Some 35.24 million voters cast a ballot, representing a turnout of 79.4% -- the highest mark since an 80.7% turnout in 1997.

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into the world of global news and events? Download our app today from your preferred app store and start exploring.
app-storeplay-store