Washington's work zone speed camera program continues rollout
The Brief
Washington's "Work Zone Speed Camera Program" aims to reduce speeding and crashes in highway work zones.
Since April, over 2,600 infractions have been issued, with most being first-time violations without fines.
More cameras will be deployed next month, with the program running until June 2030.
DUPONT, Wash. - Less than two months after launching, transportation officials are liking what they are seeing so far when it comes to the state's "Work Zone Speed Camera Program." Though some confusion exists among drivers through one work zone about the initiative.
Created by a 2023 law, the WSDOT campaign rotates trailer-mounted cameras in various active highway work zones across the state to catch speeding drivers in hopes of slowing them down.
WSDOT data shows an average of over 1,300 crashes have taken place annually around work zones over the past five years, with speeding being one of the main causes of those accidents.
"Work zones are dangerous places in themselves, right? And then obviously having people drive through those work zones at a very high rate of speed also increases the danger for the workers and also the traveling public that goes through those work zones," said Kyle Miller, Program Manager for the camera project.
The first camera launched in April, and another one rolled out this past week. Miller said the mobile cameras have moved around numerous work zones across Western Washington, including the Interstate 90/State Route 18 interchange project, fish passage work on U.S. Highway 12 in Grays Harbor County and work on Interstate 5 along Joint Base Lewis-McChord.
"Anywhere where there's a worker – WSDOT, construction, some sort of project – we are able to use this solution," Miller said. "This tool is allowed to be used in any type of work zone – whether it's maintenance, whether it's an emergency, whether it's a big construction project you see on I-5 or I-90."
According to Washington State Patrol data, 2,618 infractions have been issued since the program started. 2,504 of them were first-time violations that have no fine, while the remaining 114 infractions were second-time violations with a fine of $248.
WSDOT is still compiling and analyzing data as the program is in its beginning phases, but Miller said work crews are reporting a difference in driver behavior.
"When people see those signs, they appear to be slowing down from the feedback that I'm getting from the field itself – which is great, great news," he said.
Many drivers through the Interstate 5 work zone said they support the idea of having a camera to slow people down for safety. Though a lot of them did not even know a camera could be there.
"It's the first I've heard of it," said driver Tyler Hays from Chehalis. "I could see it being a good cause for the construction workers so people aren't exceeding the speed limit. It just keeps it safer for the construction workers who are just trying to do their jobs."
"I've never seen it before," said DuPont resident Jinnori Serino. "It kinda just looks like part of the construction that is every day."
Commuters through the area said while it is important to follow speed limits regardless of a camera, they would want to see more clear signage where one could be.
"If your regular speed on the freeway, you're gonna keep going 70 – and especially if there's nothing that is significantly to show you that there's construction and a speed camera and whatnot," Serino said.
"I think the speed cameras are okay, but only if people know that they're there," said Tacoma resident James King. "It should be to help people keep the speed limit so they'll keep themselves safe and those around them safe."
WSDOT said they put up as many signs as possible alerting drivers to the camera's presence, as they want people to know to slow down.
"This is not a gotcha in any way," said Assistant Communications Manager Amy Moreno. "We're actually happy when we don't generate infractions because people slowed down and that's a pretty successful deployment for us."
As the rollout continues, Miller said more cameras will be launched next month, with work zones all across the state being discussed as new deployment locations. And as summer travel coincides with more road maintenance, it is in everyone's best interest to slow down.
"This is not just about the worker's safety, it's also about the traveling public that goes through," he said. "Because ultimately, we really do want to make sure that everybody can come home safe."
Miller said the program should have 15 cameras available to rotate across work zones within the next few years. The program is set to expire at the end of June 2030.
The Source
Information in this story came from Albert James, a television reporter covering state government as part of the Murrow News Fellowship program – a collaborative effort between news outlets statewide and Washington State University.
Travis Decker manhunt: 'Remote' areas of 5 WA counties told to lock doors
Former Army squadmate shares insight into Travis Decker's military past
Miles Hudson found guilty on 2 counts of reckless driving in Seattle
Key figures from Bryan Kohberger's youth summoned to Idaho for student murders trial
Rochester dog training facility owner accused of killing employee during video shoot
To get the best local news, weather and sports in Seattle for free, sign up for the daily FOX Seattle Newsletter.
Download the free FOX LOCAL app for mobile in the Apple App Store or Google Play Store for live Seattle news, top stories, weather updates and more local and national news.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Washington Post
an hour ago
- Washington Post
Vance says Musk making a 'huge mistake' in going after Trump but also tries to downplay the attacks
BRIDGEWATER, N.J. — Vice President JD Vance said Elon Musk was making a 'huge mistake' going after President Donald Trump in a storm of bitter and inflammatory social media posts after a falling out between the two men . But the vice president, in an interview released Friday after the very public blow up between the world's richest man and arguably the world's most powerful, also tried to downplay Musk's blistering attacks as an 'emotional guy' who got frustrated.

Associated Press
an hour ago
- Associated Press
Vance says Musk making a 'huge mistake' in going after Trump but also tries to downplay the attacks
BRIDGEWATER, N.J. (AP) — Vice President JD Vance said Elon Musk was making a 'huge mistake' going after President Donald Trump in a storm of bitter and inflammatory social media posts after a falling out between the two men. But the vice president, in an interview released Friday after the very public blow up between the world's richest man and arguably the world's most powerful, also tried to downplay Musk's blistering attacks as an 'emotional guy' who got frustrated. 'I hope that eventually Elon comes back into the fold. Maybe that's not possible now because he's gone so nuclear,' Vance said. Vance's comments come as other Republicans in recent days have urged the two men, who months ago were close allies spending significant time together, to mend fences. Musk's torrent of social media posts attacking Trump came as the president portrayed him as disgruntled and 'CRAZY' and threatened to cut the government contracts held by his businesses. Musk, who runs electric vehicle maker Tesla, internet company Starlink and rocket company SpaceX, lambasted Trump's centerpiece tax cuts and spending bill but also suggested Trump should be impeached and claimed without evidence that the government was concealing information about the president's association with infamous pedophile Jeffrey Epstein. 'Look, it happens to everybody,' Vance said in the interview. 'I've flown off the handle way worse than Elon Musk did in the last 24 hours.' Vance made the comments in an interview with ' manosphere' comedian Theo Von, who last month joked about snorting drugs off a mixed-race baby and the sexuality of men in the U.S. Navy when he opened for Trump at a military base in Qatar. The vice president told Von that as Musk for days was calling on social media for Congress to kill Trump's 'Big Beautiful Bill,' the president was 'getting a little frustrated, feeling like some of the criticisms were unfair coming from Elon, but I think has been very restrained because the president doesn't think that he needs to be in a blood feud with Elon Musk.' 'I actually think if Elon chilled out a little bit, everything would be fine,' he added. Musk appeared by Saturday morning to have deleted his posts about Epstein. The interview was taped Thursday as Musk's posts were unfurling on X, the social media network the billionaire owns. During the interview, Von showed the vice president Musk's claim that Trump's administration hasn't released all the records related to sex abuser Jeffrey Epstein because Trump is mentioned in them. Vance responded to that, saying, 'Absolutely not. Donald Trump didn't do anything wrong with Jeffrey Epstein.' 'This stuff is just not helpful,' Vance said in response to another post shared by Musk calling for Trump to be impeached and replaced with Vance. 'It's totally insane. The president is doing a good job.' Vance called Musk an 'incredible entrepreneur,' and said that Musk's Department of Government Efficiency, which sought to cut government spending and laid off or pushed out thousands of workers, was 'really good.' The vice president also defended the bill that has drawn Musk's ire, and said its central goal was not to cut spending but to extend the 2017 tax cuts approved in Trump's first term. The bill would slash spending but also leave some 10.9 million more people without health insurance and spike deficits by $2.4 trillion over the decade, according to the nonpartisan Congressional Budget Office. Musk has warned that the bill will increase the federal deficit and called it a 'disgusting abomination.' 'It's a good bill,' Vance said. 'It's not a perfect bill.' He also said it was ridiculous for some House Republicans who voted for the bill but later found parts objectional to claim they hadn't had time to read it. Vance said the text had been available for weeks and said, 'the idea that people haven't had an opportunity to actually read it is ridiculous.' Elsewhere in the interview, Vance laughed as Von cracked jokes about famed abolitionist Frederick Douglass' sexuality. 'We're gonna talk to the Smithsonian about putting up an exhibit on that,' Vance joked. 'And Theo Von, you can be the narrator for this new understanding of the history of Frederick Douglass.' The podcaster also asked the vice president if he 'got high' on election night to celebrate Trump's victory. Vance laughed and joked that he wouldn't admit it if he did. 'I did not get high,' he then said. 'I did have a fair amount to drink that night.' The interview was taped in Nashville at a restaurant owned by musician Kid Rock, a Trump ally.
Yahoo
2 hours ago
- Yahoo
The Evolution of the Chevy Corvette: America's Sports Car Turns Supercar
Read the full story on Modern Car Collector In a new feature video from Modern Car Collector (MCC), viewers are invited to take a thrilling ride through time in "The Evolution of the Chevrolet Corvette: From Classic to Supercar", a visual chronicle of how America's beloved sports car became a global performance powerhouse. The Corvette's story began in 1953 as a sleek concept car revealed at the GM Motorama in New York. With just 300 hand-built units, the original C1 set the tone for a bold new chapter in American automotive history. But it was visionaries like Harley Earl, GM's legendary design chief, and Zora Arkus-Duntov, often called the "Father of the Corvette," who pushed the car beyond its show-car roots and into true performance territory. The MCC video walks viewers through all eight generations of Corvette evolution—from the split-window C2 Sting Ray and the brute-force C3 big blocks, to the high-tech innovations of the C4 and the return to racing form with the C5 Z06. As each generation progressed, so too did Corvette's capabilities, culminating in today's C8 platform, the first production Corvette with a mid-engine layout. Highlights include the C8 ZR1, a supercharged beast expected to push 850 horsepower, and the Corvette E-Ray, which fuses electrification with all-wheel drive for the first time in the model's history. This engaging MCC production doesn't just focus on horsepower—it celebrates the cultural significance of the Corvette, its place in racing lore, and its unmatched ability to adapt and evolve without losing its American soul. Whether you're a lifelong Corvette enthusiast or a newcomer to the legend, "The Evolution of the Chevrolet Corvette: From Classic to Supercar" is a must-watch journey through 70 years of performance, innovation, and iconic design. Follow us on Facebook and Twitter