
Skullcandy Rail ANC earbuds review: Hits the right notes
Rating – 3.5/5
They say silence is golden—but in today's world, it usually comes at a premium.
Skullcandy
's new Rail ANC earbuds are built around that idea, offering a feature-packed alternative in the increasingly competitive mid-range audio market. Priced at Rs 8,999 in India, these true wireless earbuds come equipped with active noise cancellation, IPX4 water resistance, and support for Skullcandy's proprietary Skull-iQ platform, which brings voice control, customizable buttons, and over-the-air updates into the mix. The Rail ANC also features a partially transparent design, clearly positioned to take on both lifestyle and tech-focused users.
But in a segment crowded with offerings from established names, the real question is—can Skullcandy's latest hold its own? Let's find out
Skullcandy Rail ANC earbuds design
The Skullcandy Rail ANC earbuds come in a single black finish, with a semi-transparent stem-style design. The outer panels of each bud are marked with the signature Skullcandy logo. The earbuds' see-through detailing is a nice visual touch, reminiscent of designs seen on other transparent-themed tech.
The buds feel lightweight and sit comfortably in the ear. Wearing the earbuds, we did not feel any discomfort even during extended listening sessions. They come with three pairs of silicone eartips, allowing for some level of customization in fit and seal. While the design doesn't break new ground, it feels well-built for the price point.
Talking about the case, it feels a bit chunkier. Having said that, you can still pocket it in your earbuds. The logo is placed in the front of the case with a USB Type-C logo at the bottom. The lid closure feels one of the strongest. One feature we really liked about the case is its internal lighting, which adds a unique touch.
Skullcandy Rail ANC earbuds
are equipped with IPX4 rating which means they can withstand splashes and light rain.
Skullcandy Rail ANC earbuds performance
Inside, the earbuds house 12mm drivers that cover a standard frequency range of 20Hz to 20kHz. They support Bluetooth 5.2 and are compatible with AAC and SBC codecs. The earbuds work with both Android smartphones and iPhones. The inclusion of multipoint support is a plus, allowing us to stay connected to two devices simultaneously and switch between phone and laptop seamlessly.
Touch controls are handled by capacitive panels on both earbuds. They're responsive for the most part, but occasional misfires can occur, especially during adjustments or accidental touches. Single tap for play/pause, double tap to skip forward, and triple tap to cycle between ANC On, ANC Off, and Stay Aware mode. Noise cancellation isn't particularly strong — even with ANC enabled, surrounding sounds still come through. A long press on the left earbud brings up your phone's voice assistant, while the right triggers Spotify Tap for quick access to music.
Before delving into the performance review, we'd first like to explore how the Skull IQ app integrates with the earbuds. To unlock the full potential of the Skullcandy Rail ANC, users need to pair the earbuds with the Skull-iQ companion app, available on both Android and iOS. However, there's an initial quirk for users in India—the app doesn't officially list the region, so you'll need to select 'Other' during setup. Once past that, though, the onboarding is smooth, and the customization options open up quickly.
The app offers a comprehensive suite of features. You can toggle between hearing modes, tweak the EQ using preset profiles or create a custom one, and even use the 'Personal Sound by Mimi' feature. Personal Sound is a tool that tests your hearing and adjusts the audio tuning to suit your personal hearing profile. The results are subjective—it assumes you'll prefer the EQ that compensates for any hearing loss—but it's an interesting addition for users who want more personalized audio.
You also get access to Skullcandy's hands-free voice control system, which lets you manage music, calls, and even trigger your phone's camera with commands like 'Skullcandy take a picture.' That said, the voice features work more reliably on Android than iOS. Also, speaking camera commands out loud in public may not feel natural to everyone.
Another feature worth highlighting is built-in Tile tracking. While this requires installing the separate Tile app and giving it the necessary permissions, it's a handy safeguard against losing your earbuds. With Tile, you can ring the buds if they're nearby or view their last known location on a map. Yes, it might feel like an extra step, and the app-hopping might feel tedious, but it's a practical addition, especially for those prone to misplacing their gear.
Skullcandy Rail ANC
delivers a sound profile that leans slightly toward the bass, but not overwhelmingly so. Lows feel punchy on tracks like Malang by Ved Sharma or Ghungroo from War, giving the beats a satisfying thump.
Mids come through cleanly, especially on vocals-heavy songs like Kesariya or Shayad, where the earbuds handle Arijit Singh's voice with clarity. Highs are decent, though slightly rolled off at higher volumes—noticeable in tracks like Jhoome Jo Pathaan. Overall, the sound is pleasant for casual listening and holds up well across genres.
Skullcandy Rail ANC earbuds battery
Skullcandy claims over 30 hours of total battery life with the Rail ANC, including the case, and for the most part, that holds true. With moderate volume and mixed usage of ANC, the earbuds manage around 6–7 hours on a single charge, with the case offering roughly three additional full top-ups. It's a reliable performance for daily use, and quick charging support adds convenience when you're running low.
Verdict
At Rs 8,999, Skullcandy Rail ANC brings together a solid mix of features—active noise cancellation, voice-enabled smart controls, and even Tile tracking. The sound is tuned for easy listening with a bass-leaning profile, and battery life is dependable enough for everyday use. While there are some trade-offs—like extra app setup for Indian users—the Rail ANC still manages to offer a well-rounded experience in the crowded mid-range segment.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles

Mint
8 hours ago
- Mint
Sovereign silicon: India targets indigenous 2nm, Nvidia-level GPU by 2030
India is racing to build its own 2-nanometre GPU (graphics processing unit) from scratch by 2030, with an aim to match global market leader Nvidia Corp.'s projected roadmap and strengthen its home base for artificial intelligence (AI) technologies and products. With $200 million in funding, engineers at the Centre for Development of Advanced Computing (C-Dac) in Bengaluru have been tasked with developing the chip, according to four senior officials familiar with the matter, three of whom are directly involved in the project. Also read | Nvidia pushes further into cloud with GPU marketplace The first official said that Nvidia's product roadmap shows that by 2028, cutting-end chips will be based on the 2nm node. 'This means that by 2030, the best GPUs in mainstream circulation in data centres and for AI training will be at this standard," this official said. 'That's what our GPU will achieve too, but at a much, much lower cost." To be sure, the smaller the nanometre size, the more advanced the chip. The most advanced mainstream chips of today are of 3 nanometre, such as the ones found in Apple's iPhones, among other consumer devices. Since ChatGPT's debut in 2022, GPUs have become essential to AI—boosting Nvidia's value tenfold and making it the world's second-most valuable company. Despite India's strong chip design talent, it lacks homegrown GPU patents, leaving the country dependent on US firms for core AI technology. It is this dependence that the country is looking to change. The second official cited above said that an early preview of the chip will be showcased by end-2025, whichMinthad reported last month. However, once the 2nm chip is developed by C-Dac, India is unlikely to get in the next five years a domestic fabrication plant with the capability to manufacture such chips, which is why 'we'll likely be manufacturing it at scale with Taiwan Semiconductor Manufacturing Corp (TSMC)", the second official said, adding that the Indian GPU will cost 'up to 50% less than what Nvidia currently retails its chips at". An email requesting comment on the matter from Meity and C-Dac remained unanswered till press time. A chip customer To be sure, India has historically been a customer for US chipmakers Intel, Advanced Micro Devices (AMD), Qualcomm and Nvidia, but an executive order by former US president Joe Biden, signed last year, showed that in case of conflicts, the US can restrict access to critical chips to India or any other nation. The third official cited above said that this order was a key moment for India to start seriously weighing the idea of building its own chip. 'Since then, we've been engineering an indigenous GPU from the ground-up," this official said. 'By 2030, we'll be installing it on C-Dac's cloud servers and supercomputers—making it accessible to academia, researchers and startups to make our own sovereign AI models and run cloud platforms." Also read | Home-made chips: India's GPUs set for year-end trials Industry stakeholders have for long urged India to develop its proprietary semiconductor IPs for geopolitical independence. Last month, Ajai Chowdhry, chairman of HCL and cofounder of industry body Epic Foundation, toldMintthat 'a domestic GPU patent based on the government-funded research bodies is imperative, especially seeing that almost all chips today are owned by the US". Security concern 'The necessity of sovereign technologies also comes from a security concern," said Ashok Chandak, president of industry body, India Electronics and Semiconductor Association (Iesa), pointing out that much of the chip supply chain is today reliant on China. 'In the long run, being reliant on China can make critical chips such as those used in CCTVs or automation in industrial infrastructure vulnerable to back doors," Chandak said. 'An indigenous chip will address all of these concerns. Having our own GPU chip is also vital, since it can allow India to not only make and train its own AI on such a chip, but also market it to the rest of the world." Also read | No GPUs: How Ziroh Labs is running AI model just with CPUs Meanwhile, C-Dac's objective is to offer the indigenous GPU as a system-on-a-chip (SoC) board, which will work as a full-stack system including memory chips, computing processor and connectivity modems as well. The body is well-funded, too. In FY24, C-Dac had capital fund allocation of ₹1,056 crore ($122 million) for the year from the Centre, per its annual report for the fiscal. Two of the officials cited above said that this figure has been increased in FY25. To be sure, the $200-million engineering design cost of the indigenous GPU will be spread over five years—from fiscals FY25 through FY29,according to the first official.


Indian Express
20 hours ago
- Indian Express
Fifty per cent off: Budget delight for mechanical keyboard warriors
They might be noisy, heavy and take some getting used to, but mechanical keyboards with their clickety clack sounds that bring out typewriter vibes, have a dedicated following of their own. Once largely of the wired variety seen with desktops, mechanical keyboards have evolved with time and today you can get mechanical keyboards that work wirelessly. The problem is that these often come with stiff price tags – some of Logitech. Keychron and Razer's mechanical keyboards can set you back by well over Rs 15,000. While wireless keyboards with affordable price tags do exist, they often come with a number of compromises, which makes them slightly risky investments. However, there are some exceptions to this rule, and one of them is the Portronics Hydra 10 Wireless Keyboard. This keyboard comes with Bluetooth as well as 2.4 Ghz wireless connectivity and mechanical switches as well as RGB lighting, and while it was generally available for around Rs 3500 – Rs 4000 and has an official sales price of Rs 9,999 on the Portronics website, it is now available for prices in the range of Rs 1,999 – Rs 2499, and at those prices, it is a terrific deal. It might now come with a very affordable price tag, but the Portronics Hydra 10 does not look like a low cost mechanical keyboard from any angle. The keyboard is made mostly of plastic and has a very solid feel to it. It is available in black and white, and although the white one does look more attractive, its ability to attract dust (a quality, alas, too common in mechanical keyboards, thanks to the deep spaces between keys) makes the black variant a more sensible option, unless you work mostly indoors. It is a 68-key keyboard, so you do not get a dedicated number pad and the number row on the top also has the F function keys with then, which can be a bit of a disappointment for those who want a full array of keys on their keyboard, but the keys themselves seem sturdy, have plenty of travel and have letters very clearly printed on them. What's more, they come with RGB backlighting, which you can turn off if you wish (we left it on). As this is a slightly compressed keyboard, we would recommend spending some time getting familiar with the specific shortcuts available for this keyboard as some common keys, such as that for hashtags, are not clearly marked. The left side of the top of the keyboard houses a USB Type-C port while the base of the keyboard (its back) has a USB nano dongle for 2.4 GHz for wireless connectivity and an on-off slider switch. The keyboard comes with Bluetooth 5.0 connectivity and can be connected to three devices at a time. The Hydra 10 is about a foot in length, 29 mm in height and about 10 centimetres wide, and weighs about 580 grams. It is very easy to carry along, although there is no carrying case (or even a cloth or plastic bag) in its box. We would recommend investing in a basic carry bag for it, if you are considering taking it along on your travels – it is sturdy enough to survive being thrown into a regular backpack, but it does attract dust and other particles there. All said and done, this is a compact, easy to carry keyboard, with clean, smart looks. It certainly does not look like a Rs 2000 keyboard. The Portronics Hydra 10 delivers a very good performance. The keys are a little on the small size as is often the case in compact keyboards, but there is plenty of space between them, so the chances of errors is limited. Typing itself is a great experience and those who love mechanical keyboards with satisfying clicking sounds will love the Hydra 10. It is not too loud, but key travel is excellent and each keystroke delivers a satisfying click. The RGB lights add to the overall typing experience, though those who find it distracting can turn it off. The absence of some keys can be a little disorienting initially, but you get used to the shortcuts for them by and by. Typing in general is a smooth experience, and the keyboard connects very smoothly with devices on all platforms – we used with an iPad, a OnePlus Pad 3, a MacBook Air and an Asus VivoBook and it worked well with all of them. Connecting is as simple as switching the keyboard on, pressing a key which you wish to use as a connectivity key (you can choose from three), and then choosing the device from your tablet or notebook. To switch between devices, simply hit the key dedicated to each device. The process is seamless. We used it to switch between typing on our OnePlus 13s and iPad, and faced no problems. There is hardly any latency on Bluetooth but the experience seems just a little faster on the 2.4 Ghz connection – we suggest using that mode if you are using the keyboard for gaming. Battery life is pretty good – we got through close to 5-7 days of usage on a single charge, and the fact that the keyboard charges off a type-C port is so much more convenient than carrying AAA batteries for it. And yes, you can even connect the keyboard to your device using a Type-C cable if you like a wired connection (it is the fastest of all). It is not all roses with the Hydra 10, though. We found the Bluetooth connection dropping sometimes in the middle of a typing session, which can be very irritating (it never happened on the 2.4 Ghz connection). And we can see some people getting annoyed at the need to remember keyboard combinations for something as basic as a hashtag. There is no clear way to see battery levels on the keyboard itself, and as with all mechanical keyboards, one has to reconcile oneself to regularly cleaning the space between keys! ' Still all said and done, the Portronics Hydra 10 delivers great value for mechanical keyboard fans on a tight budget. You can get it for around Rs 2,000 – Rs 2,500 or even lower with the right offers, and at that price, it just clicks!


Hindustan Times
3 days ago
- Hindustan Times
Tata Harrier EV base variant features revealed. Check them out
Tata Harrier EV will be offered with two battery pack options. The base variant will get just one battery pack. Check Offers Tata Motors has finally launched the Harrier EV in the Indian market. The prices start at ₹ 21.49 lakh ex-showroom. The homegrown manufacturer has not yet revealed the prices of the rest of the lineup. But at the event, Tata Motors did reveal that the Harrier EV will be offered in three variants - Adventure, Fearless and Empowered. At the same event, the brand also showcased a few of the features of the Adventure variant of the Harrier EV. The Adventure variant, being the base variant, will only be offered with the smaller 65 kWh battery pack. As of now, we do not know the range figures of this battery pack. But we do know that it would support fast charging up to 120 kW, where the top up from 20 per cent to 80 per cent happens in just 25 minutes. This variant will be offered only with a rear-wheel drive powertrain in which the electric motor is capable of producing 234 bhp of max power. Depending on the variant, the interior theme of the Harrier EV will change. There would be Tata's new Ultra Glide suspension, which is basically frequency dependent dampers. There would be drive modes - Normal, Wet/Rain and Rough Road and multiple drive modes - Sport, City and Eco. Apart from this, there is also Drift mode on offer. There would be four regen modes on offer that will be controlled via pedal shifters. Tata is also offering cruise control and Acoustic Vehicle Alert System. On the outside, the Harrier EV base variant will come equipped with 18-inch alloy wheels with aero inserts, dual-tone paint, LED bi-projector headlamps, LED DRLs, LED tail lights, connected lights at either ends, roof rails, integrated side steps, rear wiper and washer, puddle lamps, and a shark-fin antenna. In terms of safety features, there is 6 airbags. all wheel disc brakes, tyre pressure monitoring system and rear parking camera. Tata is also offering features such as traction control, hill descent control, hill hold control, cornering stability control, electronic parking brake, auto hold and brake disc wiping among others. Also Read : Tata Harrier EV launched, price starts at ₹ 21.49 lakh. Top 10 features you must know Additionally, it features 45W USB-C charging ports, a sliding front armrest, tilt and telescopic-adjustable steering, a parcel tray, leatherette seat upholstery, a dual-tone interior theme, electrically adjustable and foldable ORVMs with an auto-fold function, as well as V2V and V2L capabilities. The 2025 Tata Harrier EV Adventure boasts several key interior features, such as automatic climate control, an eight-way adjustable driver seat, a four-way adjustable front passenger seat, rear AC vents, various terrain modes, multiple drive modes including drift mode, cruise control, an Acoustic Vehicle Alerting System (AVAS), dual 10.25-inch displays, iRA connected car technology, connectivity for Apple CarPlay and Android Auto, as well as over-the-air (OTA) updates. Check out Upcoming Cars in India 2024, Best SUVs in India. First Published Date: 06 Jun 2025, 15:53 PM IST