Experts Answer: 3 Times When Home Break-Ins Usually Happen
One of the biggest advantages of today's home security cameras and systems is the ability to watch over your home when you're not there or asleep. But that leads to an important question: When are burglars and break-ins most likely to happen? Do they really prefer the dead of night?
CNET took a look at the research and expert opinions and arrived at some interesting conclusions. Burglars don't always strike when you think they would, and having a reliably armed security system may be even more important than you think to stop them. I've rounded it up into three times when thieves are most likely to strike at homes and why that helps you plan for better security.
Read more: What Burglars Look for When Choosing Homes to Break Into
1. The middle of the day (especially early afternoon)
Thieves have a lot to gain by acting in the middle of the day.
Getty Images
If you want to know when burglars try to break in to homes, it's a good idea to ask them. KGW8 out of Portland, Oregon, did just that, interviewing more than 80 (caught) burglars to find out how and when they struck.
The answer? Most chose the middle of the day, the hours before or after noon: Homeowners are most likely to be gone at work in the day, thieves have great visibility when exploring a new yard or house, and it's easier to pretend to be a lost friend or family member if they get caught in broad daylight.
Burglars commonly strike in the early afternoon -- one specifically said between "12:30pm and 2:30 p.m." People who go home for lunch or errands have most likely finished and are back to work during these hours, so there's a greater chance the home will be empty. Others KGW8 interviewed preferred the morning when there's also a guarantee people will be at work. That's similar to other studies that report burglaries are most likely to occur between 10 a.m. and 3 p.m.
Curious about what burglars are after? Most hunt down cash, jewelry, medications and items that can easily sell for money -- notably guns and small electronics. Any signs that these items exist in a house may attract watchful thieves. They also reported that security systems and big dogs were big deterrents (although we don't suggest getting a dog for security purposes).
2. During the summer (between June and August)
Burglars are caught trying to break in far more often in summer than winter.
Arlo
Burglaries are lowest at the height of winter, and highest during the hottest summer months. Since burglary is often a crime of opportunity and requires quickly casing residential neighborhoods, it makes sense that thieves would prefer longer, warmer days. It's also a lot harder to break into homes if there's ice or snow everywhere.
That's why research from places like Arizona State University shows that burglaries reach their height in August, and are generally on the rise between June and August when the weather is warmest.
3. At midnight
Amazon's Blink Wired Floodlight cam in action.
Blink
We know, we just said that burglaries are most common during the warmest, brightest times of day. But not everything is so simple. Research from companies like Vivint has shown that burglaries also spike around midnight, with data showing around 6% of burglaries occurring at 12 a.m.
This is an interesting spike because late evening and early morning hours are the least likely times for burglaries. There's just something about midnight that makes some burglars think it's a good time to strike. They may also believe that homeowners are asleep at this time, or that it's easier to hide in the dark.
Read more: The Best Tips to Prevent Burglars and Break-Ins
With this info now in your brain, you're ready to make great decisions about when to arm your security system or when to make sure your smart lights and security camera floodlights are ready to work. It's also a good idea to make sure your smart locks are locked during these times because -- you guessed it -- most burglars start by simply trying the front door.
To become a master of your home security, check out our guide on the best places to put security cameras, common home security myths you should stop believing, and what to do if someone you're living with is the one stealing.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
New York Post
4 hours ago
- New York Post
Woke NYC Councilwoman Gale Brewer demanding free dental care for migrants
A lefty Upper West Side councilwoman demanded free dental care for illegal immigrants this week — as she revealed she's shelled out more than $8,000 of her own dough to keep their pearly whites intact. 'Is someone paying attention to all of their health needs!' Councilwoman Gale Brewer (D-Manhattan) roared at NYC Health Department officials during a May 23 budget hearing. 'They have a lot of health needs. Forget the dental! I'm already out $8,000-$10,000 on the dental. So who is paying attention to them?' she scolded. 7 Councilwoman Gale Brewer claims getting proper dental care for illegal immigrants is like pulling teeth. Getty Images Brewer, who earns $148,500 as a council member, told The Post Friday she's been fighting tooth and nail for migrants' health needs — including paying out of her own pocket for some of them to root canals, cavity fillings, and other dental procedures. 'I've been doing this kind of stuff for years, especially helping younger people,' said the 73-year-old Brewer, who previously fostered 35 children with her husband, author Cal Snyder. 'This is nothing new for me.' During the hearing, Brewer told Acting Health Commissioner Michelle Morse the agency needs to do a better job spreading the word about what free healthcare assistance is available to migrants at city hospitals — including dental. 'Those guys you see driving those mobile e-bikes, they all have [city-funded health insurance] …, but they don't know what to do with it, to be honest with you,' she said. 7 'They have a lot of health needs. Forget the dental! I'm already out $8,000-$10,000 on the dental. So, who is paying attention to them?' Brewer said. New York City Council 'And I assume you can't do dental, because you can't get dental for Americans — let alone for anybody else. They all have dental issues.' 'I happen to know a lot of … asylum seekers [and] support them,' she ranted. 'You can't imagine how well I know then them – extremely well. And so, I've taken on a lot of the young people, a ton of them.' 'These are young guys. They're pretty lost' about what taxpayer-funded health benefits they qualify for, Brewer added. 7 Brewer told Acting Health Commissioner Michelle Morse the agency needs to do a better job spreading the word about what free healthcare assistance is available to migrants at city hospitals. 7 Morse said her agency would work with the city's hospital system to expand education to migrants about free healthcare services through the 'NYC Care' program. New York City Council 'I'm really concerned about their health.' Critics said the longtime pol is more concerned with illegal migrants' pearly whites than the needs of her own district. 'This is another example of misplaced priorities from Gale Brewer,' said longtime Upper West Side activist Maria Danzilo. 7 Recently arrived asylum seekers get information on free health care in front of P.S. 188 in Coney Island, which has recently begun housing migrants in the school gym on May 16, 2023, in New York City. Getty Images 'It's unfortunate that Gale feels migrants' dental problems are more important that the needs of her own constituents in the community. 'What is she doing about the healthcare needs of her community? Plenty of New Yorkers also lack medical coverage.' Morse said her agency would work with the city's hospital system to expand education to migrants about free healthcare services through the 'NYC Care' program. 7 Darton College dental hygiene students Regina Schirato and Brooke Wenck give a farm worker a dental exam Wednesday evening, June 18, 2003, in a migrant farmer camp near Moultrie, Georgia. Getty Images All city hospitals – both public and private – are required by law to treat emergency patients regardless of their ability to pay or immigration status. Migrants who've applied for political asylum are also eligible for Medicaid benefits. Minors, seniors, and pregnant women are eligible for free health care regardless of their immigrant status. The Health Department declined to comment when asked if Brewer could've saved herself some cash by directing migrants with dental issues to city hospitals or health centers. 7 Brewer said she's been fighting tooth and nail for migrants' health needs. Laura Cavanaugh This isn't the first time during hearings over the next fiscal year's budget where Brewer's gone off on a wild tangent. She told Department of Correction honchos during a March hearing that the food menu offered on Rikers Island is so bad it makes her sick to her stomach. Brewer then proclaimed she wanted the city to feed jailbirds 'farm-to-table' meals, like ones served up at some of the Big Apple's top Michelin-starred restaurants.
CNET
5 hours ago
- CNET
I Tested Ninja's New $1,000 Grill with Built-in Smoker and Convection Fan
CNET's expert staff reviews and rates dozens of new products and services each month, building on more than a quarter century of expertise. 8.3 / 10 SCORE Ninja FlexFlame $1,000 at Ninja Kitchen Pros Built-in smoker can add smoky flavor to food with the push of a button Convection fan provides fast preheating and heat recovery, and even cooking Feels well built and includes a 10-year warranty Griddle attachment offers mess-free cooking of flaky fish and vegetables Large 424 square-inch grill top Cons A big grill means a lot of grill to clean Must be plugged in to operate, and the power cord is short Accessories are sold separately Expensive Ninja FlexFlame 8.3/10 CNET Score $1,000 at Ninja Kitchen Grills aren't just simple machines with iron grates over hot coals or burners like they used to be. There are smart grills with top-down broilers, pellet grills that burn at ultra-precise temps and those mobile apps to manage your ribs and brisket without leaving the pool lounger. Ninja, ever the innovators in kitchen gear, has launched its first-ever full-sized gas grill and it's one of the most feature-heavy we've tried. The $1,000 FlexFlame Grill is a beast of a BBQ with large cooking surface, built-in smoker box and convection fan to mimic the evenness and precision of an indoor oven. There are also attachments to turn the grill into a griddle or pizza oven, making it one of the most versatile on the market. The Ninja's clean appearance hides a dynamic grill top that can turn into a griddle, smoker, roaster or pizza oven. David Watsky/CNET So is the Ninja FlexFlame really worth $1,000? I tested it for weeks and was wholly impressed with the form and function but a grill this expensive only makes sense for someone who takes advantage of all it has to offer. Here's everything you need to know about the flashy new Ninja FlexFlame. What's different about the Ninja FlexFlame? The FlexFlame looks like your average outdoor three-burner gas grill but unique features include: A convection fan for even cooking and precise temperature control. A built-in pellet smoker allows you to impart smoky flavor into any food. The dynamic grill top transforms into a flat-top griddle, roaster and pizza oven with attachments (sold separately). The built-in smoker box sets the FlexFlame apart from most of the grills we've tested. David Watsky/CNET Design and build quality The FlexFlame is sturdy and designed for easy cooking. All the add-on attachments, including the roasting rack, cast-iron griddle top and pizza stone, fit squarely in their places and are well-made. The grates and griddle are enameled cast iron and the under-cabinet space is roomy. Similar to industry leader Weber, it has a 10-year limited warranty. The grill is solid, once assembled. Adding pellets to the hopper is slightly awkward but there are no other obvious design flaws. David Watsky/CNET The stainless steel and porcelain-coated finish looks nice, but the aesthetics are nothing special. If smudgy stainless steel isn't your thing, there's a matte black edition available from Ninja or The Home Depot. Assembly and setup Assembling the grill should take one hour or more. The instructions are user-friendly and include video tutorials. In most regions, a white-glove service is available to have the grill delivered already set up for an extra cost. Cooking performance A built-in convection fan helps with evenness and efficiency The CyclonicHeat fan helps distribute air evenly over food and keeps the temperature consistent. David Watsky/CNET Once the grill is set up and plugged in (yes, it requires electricity to operate) and ignited using the ignition system, all the burners are ignited, and a built-in convection fan begins to pump away, I was able to choose a cooking method ranging from a precise low and slow cook or roaring high heat as hot as 600 degrees Fahrenheit, perfect for pizza. Preheating the oven to its hottest 600 degrees Fahrenheit takes about 10 minutes, which is fast for a grill. A temperature readout on the dial lets you know when it is ready. The CylonicHeatIQ -- aka a convection fan and heat sensors -- circulates heat evenly throughout the chamber and keeps the temperature consistent. I saw this feature on display when I roasted a whole chicken with a can of light lager up its rear. It was done in less than 45 minutes and the skin was crispy and the bird was evenly cooked. Lightning-fast temperature recovery Even if the lid was opened, the FlexFlame recovered the set temperature much faster than other grills. David Watsky/CNET The convection fan also gives this grill quick temperature recovery via powerful burners and a convection fan. If I opened the lid to check cooking progress, I typically returned to temperature within a few seconds of closing it again. Grilling: This grill gets screaming hot and the temperature readout helps determine when it's ready for action. I found it easy to get a great sear on the burgers, salmon and chicken I cooked on it. Grilling on the FlexFlame wasn't much different from grilling on other quality grills I've used. The Ninja FlexFlame's smoker and a low, slow heat from the burners combined to make some mighty tasty ribs. David Watsky/CNET Smoking: The FlexFlame's marquis feature is the built-in smoker box. All it takes is to drop a cupful of wood pellets into the hopper. Once the grill is fired up, either on low/slow mode or a higher heat, you close the hood and tap the woodfire flavor button and the system starts pumping smoke inside. These were some of the better ribs I've made and it couldn't have been easier. David Watsky/CNET I used the smoker to cook a rack of pork ribs at 250 degrees Fahrenheit for 2 hours. They were tender and juicy with a pleasant, light smoky flavor. I then cooked beef ribs at a lower temperature but for a longer time and the smokiness was more pronounced. I let the beef ribs smoke for even longer and it totally paid off. David Watsky/CNET Griddle: As much as I enjoyed the smoker, the feature I found myself using most was the half or full griddle insert and I recommend buying those add-on accessories. While beef and chicken are often the stars of a barbecue menu, I love cooking the whole meal out there. That often includes veggies, potatoes or flaky fish that can break apart and fall through the grates onto the burners and into a wretched mess. If you get the Ninja FlexFlame, the half griddle attachment is a must. David Watsky/CNET The FlexFlame griddle sits firmly next to the grill grates, so you can use both surfaces at the same time. Chicken and beef get kissed by the flames and attractive grill marks, while salmon enjoys a fierce sear yet stays intact on the griddle side. Toss broccoli or diced mushrooms drizzled with olive oil with them, and you've got a meal in less than 15 minutes. You can grill flaky fish or make a diner-style breakfast on the FlexFlame's griddle. David Watsky/CNET Pizza: Because the oven can reach 600 degrees Fahrenheit and hold its temperature consistently, it's an ideal grill for making pizza, especially if you order the pizza stone attachment ($50). Precision heat for expanded outdoor cooking The grill cooked my beer can chicken evenly in less than 45 minutes. David Watsky/CNET Along with the griddle insert and option to smoke, a feature of the FlexFlame I fell for was the digital control panel with precision temperature settings ranging from 200 to 600 degrees Fahrenheit. With most grills, the temperature inside the grill is a guessing game and it often doesn't correspond directly to the setting on the dials. FlexFlame's precision allows you to use it like a traditional convection oven, even in summer, a great foil for keeping the kitchen cool on lasagna night. Perfect grill for steaks and thick cuts of meat The FlexFlame allows you to cook using different methods and surfaces at the same time. David Watsky/CNET Fussy carnivores know that the best way to cook a thick cut of meat like ribeye, filet or pork chop is to sear the outside on both sides and finish it with indirect heat in the oven. Because this grill can imitate an oven with more precise convection cooking, you can do both right in the FlexFlame's cooking chamber. Simply move the seared steak up to a roasting rack to finish and stick it with a meat thermometer to nail the doneness. It's a beast to clean A grill big enough to accommodate all those features and functions means there is a lot of real estate to clean afterward and maintain. That's especially true after a long, slow, low cook such as ribs, brisket or pork shoulder. None of the grill's components are advertised as dishwasher safe, requiring manual cleaning. Slow cooking combined with convection heat can result in a good deal of mess to clean up after. David Watsky/CNET Fatty foods ooze grease and the convection fan blows air around so things can move more than in a typical grill. There's a grease trap and management system, which is particularly useful when griddling, but it can only do so much. All grilling requires cleanup but expect a relatively robust cleaning session after each use of the FlexFlame. Read more: How to Clean Your Grill like a Pro It must be plugged in to work, which is kind of annoying This is my first grill to require electricity, and there were times I wished it didn't. The power cord attached to the grill is short -- I assume for safety -- so you'll need an extension cord. My home doesn't have outdoor outlets, so running a cord out the back meant I could not close the storm door. Within a few minutes of using the smoker feature, much of that smoke had snuck its way into the house. Not exactly where you want it. Conclusion: The pricey FlexFlame is worth it for the right person The new Ninja FlexFlame has all the makings for a delicious summer. David Watsky/CNET The Ninja FlexFlame offers more than most gas grills, including impressive temperature control, a dynamic grill top and the option to smoke your food with the push of a button. At $1,000 for the grill only, it costs more than most, especially if you nab the add-ons. (I like the half griddle pan best.) Because of this, you'd be wise to consider all that the Ninja offers and whether you'll use these features regularly to justify the cost. If you're smoker- or barbecue-curious or have been considering an outdoor pizza oven or flattop grill, the FlexFlame can stand in valiantly for all three outdoor cooking appliances. Plus, it delivers all the trappings of a sturdy and high-functioning gas grill. If you're not in the market for those other tools, just a great grill; the exceptional Weber 3-Burner Spirit E-33 or E-321 can be yours for roughly half the price.
CNET
5 hours ago
- CNET
Easily Make Your Own Distilled Water With 5 Simple Steps
When disaster strikes, distilled water can be a lifesaver, especially if you have a CPAP machine for sleep apnea or other critical medical devices that require it. As the purest type of water available, distilled water can be a blessing for dealing with cuts or scrapes, since you'll be limiting the risk of infection. Unlike simple filtered water, distilled water is pretty much free of all impurities. That means it's missing beneficial minerals like calcium and magnesium and will taste a little weird, even though it's extremely safe to drink. Maintaining and storing a good supply of distilled water is a great way to prepare for emergency situations like hurricanes, floods, wildfires or other natural disasters. Most grocery stores sell distilled water, but in the past few years, we've seen many shortages. If you can't find distilled water and need it to prepare for an upcoming storm or to ensure you can run your medical devices, there's an easy way to make it at home yourself. Why make distilled water at home? For people suffering from sleep apnea who use CPAP machines or any other sort of humidifier, distilled water is essential. It's also useful if you don't want additional minerals in your water. (For example, distilled water won't corrode automobile engine parts or create lime-scale buildup in aquariums and it's easier on your home if you use it to make this all-natural cleaner.) Joey Skladany/CNET If you live in a place with "hard" water or water with lots of chemicals, you can even use distilled water to protect your hair when washing it. However, because distilled water doesn't have minerals like calcium and magnesium, it tastes bland and isn't the best for drinking. You can buy distilled water at your local grocery store or on Amazon, but making it at home will save you money and keep a few plastic jugs out of the recycling system. Learning to make this bacteria-free water at home will also save you if the store is out of stock. Below, I'll walk you through the five steps to make your own distilled water. I'll also explain the differences between all the types of water you come across in the store. For more tips, find out if it's cheaper to buy groceries online compared with the grocery store and our list of the best filtered water bottles. What's the difference between tap, filtered, purified and distilled water? Tap water is the easy one. Turn on your kitchen faucet. Water comes out of the tap. Voila! Tap water. The quality of tap water varies by location and might contain traces of minerals specific to the geology of your region, as well as traces of chemicals used in municipal water treatment. Hopefully, your tap water is safe to drink, but that's not true for as many as 45 million Americans. Filtered water is one solution. Filtered water starts out as plain tap water. You may already have filtered water in your home by way of a whole-house filtration system, a faucet filter or a water filtration pitcher. Most filtered water passes through some combination of carbon and micron filters, which help to remove chemicals such as chlorine (commonly added to municipal tap water as a disinfectant) and pesticides, and metals like copper or lead. Filters can also eliminate foul odors and tastes. Purified water usually begins as tap water as well. It will go through many purification processes, including those used for water filtration. Purified water goes a step further than filtering, with a process that removes chemical pollutants, bacteria, fungi and algae. You'll often find purified water in bottles at your local grocery. Distilled water is a more specialized type of purified water but much easier and cheaper to produce at home. As with purified water, it meets the classification requirement of 10ppm (parts per million) of total dissolved solids, aka contaminants, or less. The process of distilling is simple: Heat tap water to the point that it turns to vapor. When the vapor condenses back to water, it leaves behind any mineral residue. The resulting condensed liquid is distilled water. Is it safe to drink distilled water? Distilled water is completely safe for use but the downside of distilling is that it removes all of the helpful minerals like calcium and magnesium that occur naturally in tap water. For that reason, it isn't generally recommended to use distilled water as your daily drinking water. You might also find that it lacks the flavor of tap or filtered water. What's the best way to store distilled water? If stored properly, distilled water can have a long shelf life as long as it's not exposed to direct sunlight or warm temperatures. Choose the storage container you use for distilled water carefully. Distilled water's lack of nutrients can cause it to leach chemicals from the container it's stored in. If you plan to use the water immediately, most containers will do but for long-term storage it's best to use glass or high-quality stainless steel. Making distilled water is like a fun science project. Gettys Images/DanBrandenburg How to make your own distilled water Here's how you can distill your own water at home. Not to get too scientific here, but this is exciting for me. We'll be using water in all three of its known states -- solid, liquid and gas. The gist is this: You heat water (liquid), turn it into water vapor (gas), then collect the condensation with the aid of ice (solid). It's like middle school science class all over again. You'll likely find everything you need in your kitchen. A large pot with a lid, a small pot, water, ice and oven mitts for handling the hot cookware. It does take some time for all this science to happen, so be prepared. In my example below, I started with 8 cups of water in the large pot. After 1 hour, I had produced about 1 1/4 cup of distilled water. To create a gallon jug that you'd find in the supermarket you'd need about 13 hours of distilling time. If you follow these steps, you should get near 100% yield, but whatever amount of distilled water you want to end up with, make sure to add additional water so you don't end up heating an empty pot(s) at the end of the process, which can damage cookware. Ice speeds up the condensation process. Steve Conaway/CNET 1. First, place the large pot over a stovetop burner and add 8 cups of water. Then, place the smaller pot inside the large pot. At this point, the smaller pot should float on top of the water. The key to circulating water vapor inside the large pot is airflow. Make sure there's plenty of space around the smaller pot, both around its sides and between it and the top of the larger pot. 2. Next, turn the burner to somewhere between medium and medium-high heat. I tried to keep the heat level at a steady simmer -- somewhere between 180 and 200 degrees Fahrenheit -- and not a boil. Running a higher temperature won't get you a higher yield, but it will warm up the cold side of the lid faster, and make general handling of the equipment harder to deal with. 3. After you put the burner on, place the lid upside-down on the large pot. Lids are usually higher in the middle than around the edges. Flipping the lid will allow the condensed distilled water to trickle down to the middle of the lid and into the smaller pot. Once all this is done, head over to your icemaker (or tray) and load the top of the inverted lid with ice. The difference in temperature on the two sides of the lid will speed up the condensation process. Use caution throughout the process. Steve Conaway/CNET 4. At this point, you can sit back and wait. I ended up replenishing the ice supply twice within an hour, once at 30 minutes and once after 45 minutes. This is what you need the oven mitts for -- that lid will be hot! Use caution when dumping that now-hot melted ice. The water in the smaller pot is your distilled water. Steve Conaway/CNET 5. Any water that has dripped down into the smaller pot has now been distilled. Again, I was able to make about 1 1/4 cup of distilled water from 8 cups of tap water in about an hour. Just remember, making your own distilled water is easy (and fun!), but lack of nutrients makes it a bad choice for daily drinking water. But if you're stuck at home and you rely on a device that requires it, or perhaps you just want to keep your fish healthy, you may want to try making it yourself. For more, check out how to clean mold and bacteria out of your washing machine and the best way to unclog a clogged toilet.
