Audi is restructuring its Formula 1 team once again
Formula One
CEO Adam Baker has left Audi's F1 project already, with Mattia Binotto given more power Skip 1 photos in the image carousel and continue reading
Was Audi aware just how tricky it'd be to set up its new Formula 1 team? Given how many times things have changed behind the scenes, we'd argue it probably wasn't.
And now there's been yet another spin of the managerial merry-go-round, with CEO of the project Adam Baker leaving 'by mutual agreement'.
Advertisement - Page continues below
That CEO role is apparently now considered obsolete, and former Ferrari team principal Mattia Binotto has been given more power as he's been promoted to 'Head of Audi F1 Project'. We're told Binotto will now be responsible for 'development activities at the Hinwil and Neuburg an der Donau facilities, as well as at the future technical centre in England'.
Christian Foyer, who has previous with Lotus, will now join as chief operating officer of Audi Formula Racing GmbH. That's the separate company responsible for Audi's new F1-spec hybrid powertrains. However, Stefan Dreyer will continue his role as CTO for said company, and will now take on the additional role of 'spokesperson for the AFR management board'. You might like
Oh, and former Red Bull sporting director Jonathan Wheatley is team principal and 'management board spokesperson' at Sauber Motorsport AG in preparation for the takeover.
READ MORE Audi has sold off a 'significant' chunk of its F1 team…
Advertisement - Page continues below
'We would like to thank Adam Baker for his commitment over the past years,' said Audi's big boss Gernot Döllner. 'He played a decisive role in shaping the overall strategic concept for the entry of Audi into Formula 1 and got the development of the power unit in Neuburg off the ground.
'With Christian Foyer, we are now bringing a proven expert in process structures in F1 powertrain development into the project. His experience will help ensure the synergistic cooperation and necessary speed on the journey we have embarked upon regarding the debut.'
It's just under 10 months until Audi's F1 debut, so it better get cracking with more of that 'synergistic cooperation' if it wants to rapidly improve the fortunes of the current Sauber team.
Thank you for subscribing to our newsletter. Look out for your regular round-up of news, reviews and offers in your inbox.
Get all the latest news, reviews and exclusives, direct to your inbox.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Auto Blog
an hour ago
- Auto Blog
Manhart Turns Porsche 911 Turbo S Into Hardcore Supercar
This is the 911 to have if you're in a hurry. Manhart Has Pulled Off Something Special Everyone wants a piece of Porsche's quickest 911 right now. Earlier this week, Gunther Werks released an exorbitantly priced aero kit for the 991 Turbo S, but that didn't add more power or performance to the 640-horsepower sports car. Fortunately, Manhart exists and has just revealed the TR 900 II, a 992-gen Turbo S that has been enhanced with a comprehensive performance kit. The result is a Porsche 911 with outrageous power and hardcore looks to match. Source: Manhart EV-Like Power And Torque Hybrids and EVs have long surpassed pure ICE cars in raw power and torque, but Manhart has shown what's possible without any electric assistance. Whereas the stock Turbo S produces 640 hp and 590 lb-ft of torque, the TR 900 II dials things all the way up to 922 hp and 804 lb-ft. That 922-hp figure is presumably metric horsepower, but it still works out to 909 imperial hp – far surpassing the standard Turbo S. The flat-six engine has been boosted by a Manhart Turbo performance kit, in addition to ECU remapping. A new stainless steel exhaust with valve control has also been fitted, as have race downpipes with 200-cell catalytic converters. The seven-speed dual-clutch automatic has been beefed up to cope with the extra power, but the standard carbon-ceramic brakes have been left as is, since they're already powerful and durable enough to cope with the normal Turbo S' incredible performance. Manhart makes no claims about how quick the TR 900 II is, but based on the fact that the stock Turbo S hits 60 in 2.6 seconds, we expect a time in the low two-second range; at this level, even a few tenths shaved off the normal Turbo S time would be a massive achievement. Autoblog Newsletter Autoblog brings you car news; expert reviews and exciting pictures and video. Research and compare vehicles, too. Sign up or sign in with Google Facebook Microsoft Apple By signing up I agree to the Terms of Use and acknowledge that I have read the Privacy Policy . You may unsubscribe from email communication at anytime. It Looks The Part, Too The standard 911 Turbo S is not the most impactful 911 to look at – that's a role reserved for the likes of the track-focused GT3 RS. But the TR 900 II is no ordinary 911, and it shouldn't look like one. To that end, Manhart added Concave One forged wheels measuring 21 inches in front and 22 inches at the back. The body sits 1.2 inches lower, thanks to Manhart lowering springs by H&R, giving this Porsche an even more menacing stance. A Moshammer aero kit includes a front spoiler, side skirts, and a rear diffuser. A larger carbon rear spoiler completes the look. Source: Manhart Black stripes on the body and unique wheel finishes are complemented by a Manhart steering wheel logo and Manhart-branded floor mats inside, but otherwise, the interior hasn't been changed too much. No price was provided for the TR 900 II, but expect a figure far beyond the $230,400 of the standard Turbo S. This level of power doesn't come cheap, even if using all of it may prove to be a mighty challenge in the real world. About the Author Karl Furlong View Profile
Auto Blog
an hour ago
- Auto Blog
One-Off Porsche 963 RSP Is The Ultimate Roadgoing Racecar
Porsche 963 RSP Pays Tribute To 917 It's here, and as expected, the Porsche 963 RSP is a one-off road-going monster based on the automaker's Le Mans Hypercar contender, created for none other than Roger Penske, who nearly became a professional racing driver himself. He and Porsche have enjoyed a long and successful motorsport relationship that stretches back to 1972, and with the pair still working together in endurance racing in 2025, it's only fitting that the man who helped Porsche achieve glory in motorsport is honored with a one-off car like no other. Porschephiles will know that Porsche famously did something similar in 1975, when the Count Rossi 917 was created for one wealthy enthusiast. Just as was the case then, this was no easy feat. Significant Mechanical Changes Required For Road Use To clear at least some speed bumps, the suspension was raised to its maximum ride height, and the Multimatic DSSV dampers were calibrated to their softest setting. Even so, some images reveal a car that barely clears small obstructions. Then again, we doubt Mr. Penske uses roads with lots of potholes very often. Changes were also made to the lighting and turn signal systems to ensure they're suitable for road use without dazzling or confusing other drivers. But what about the engine, you're asking? Well, the hybrid V8 derived from the 918 Spyder retains its standard race tune (which we suspect means 670 horsepower, per Balance of Performance regulations for the Hypercar class), but the mapping was changed for smoother power delivery. That sounds simple, but Porsche says that getting the powertrain to run on pump gas was 'a significant undertaking.' Porsche never implies that anything is impossible, but this must have been quite a challenge. Kevlar And Carbon Fiber Are Difficult To Paint Carbon fiber and Kevlar have similar qualities, but the latter is tougher and far more difficult to tint, so it's rarely used (or, more accurately, seen) in modern hypercars. But in racing cars, aesthetics will always take a back seat to performance and safety. Thus, most racecars are wrapped, not painted, which also allows manufacturers to get away with a rougher finish, since the goal is lightness and strength, not smoothness of surface. For a one-off road car as significant as the 963 RSP, a vinyl finish simply wouldn't do. Giving Porsche's paint specialists a chance to show off (or pull their hair out), the Paint to Sample color Martini Silver was expertly recreated according to records at the Porsche Museum, with a triple-layer lacquer encouraging Mr. Penske to use it on the road as often as possible, as intended. Disappointingly, Porsche has not revealed much of the rear of the car, but the planking/fin between the rear wing was removed to make the 963 look more like the 917. An Interior That Is Just About Liveable Inside, a lavish leather upholstery program has been carried out over the otherwise almost unchanged cabin, with the standard race wheel and dash being retained. A cupholder was fitted, and all the foam inserts were rewrapped, while the roof lining and A-pillars were retrimmed in matching light Alcantara, but there's no airbag or infotainment system. That's because, as a one-off, this received special approval from the government in France, where the 24 Hours of Le Mans is held and where the 917 Count Rossi lived. Other nods to the 917 Count Rossi include old-school Michelin logos on the tire walls, a Porsche enamel badge rather than a graphic, end plates for the ventilation system that mimic the fan atop the 917's flat-12 engine, and a bespoke toolset, as one would have expected in the gritty days of roadgoing endurance racers. We have no word on total cost, but the Le Mans racer it's based on starts at $2.9 million… About the Author Sebastian Cenizo View Profile
Auto Blog
an hour ago
- Auto Blog
Audi's New Electric Crossover Chooses To Be Towed To Prove It's A Good EV
Audi's New Crossover Coupe Will Look Sportier Than The BMW Alternative Audi is preparing to give its Q4 e-tron compact electric crossover a subtle styling update sometime in the middle of next year, likely arriving for the 2027 model year. Long before that happens, engineers are testing the EV in the Austrian Alps, allowing our spies to capture some of the subtle styling updates. Already a looker, the facelifted Q4 will be getting updated graphics for its front and rear lighting signatures inspired by the Q6 e-tron and other new or heavily revised models like the A6. While styling is subjective and not everyone will agree, this writer believes that the new looks will continue to place the Q4 above the iX2 in this segment's beauty pageant. Now, let's address the elephant in the room: why is this development mule not driving on its own power? Testing EV Systems Requires Sharp Slopes While it may appear as if the crossover is being towed due to a malfunction – which is not uncommon – our spies inform us that the EV is being towed by a current-generation Q3 crossover as part of a brake test. The EV is towed to the top of a tall route and then allowed to drive back down on its own, braking all the way down. This tests both the brakes and the regenerative braking system that helps recharge the battery. Since the prototype was reportedly able to drive on its own power, we suspect that Audi may have been testing some battery management software, potentially looking for ways to ensure that an EV with a full battery (hence the tow up the hill) can still use maximum regenerative braking without anything overheating or otherwise malfunctioning. Most Of The Changes For 2027 Will Be Hidden When the 2024 Q4 e-tron update arrived, the changes were mostly beneath the skin. This time, it appears that the outline of the headlight cluster may no longer be just an accent, as close-up images seem to suggest a single lens cover. We also expect some massaging of the front and rear fascias. However, only hardcore Audi geeks will notice things like that. More important changes for what is, as mentioned at the outset, already a good-looking thing, will include shorter charging times, more range, an illuminated logo on each end, and probably some larger screens. Expect more revealing photos throughout the year. As for a release schedule, that is in flux. Audi is reportedly considering building the Q4, Q6, and other e-tron models in the U.S. to dodge tariffs, but that scenario is constantly evolving, so we won't get anything concrete for a while yet. Source: Autoblog About the Author Sebastian Cenizo View Profile
