2026 Rolls-Royce Ghost Review: Expert Insights, Pricing, and Trims
Reviewed by Alex Leanse
Calling any Rolls-Royce 'entry-level' seems preposterous, but if a vehicle in this lineup must have that designation, it's the Ghost. Despite being the cheapest Rolls-Royce, the Ghost still has all the automaker's ultra-high-end craftsmanship and luxurious driving dynamics.
Once, the Ghost was based on the BMW 7 Series, and the current generation that went on sale for 2020 is built on Rolls-Royce's bespoke Architecture of Luxury platform. It's also offered with an extended wheelbase or in sport-inspired Black Badge specification.
What's New
Rolls-Royce gave a significant update to the Ghost for 2025, so changes for 2026 are likely to be few. For model year 2025, the Ghost gained:
Updated headlights, bumpers, and wheels
Reshaped dashboard
Improved tech and connectivity features
Additional paint and trim choices
This page will be updated with more insights and photos as information becomes available.
What We Think
Aside from other Rolls-Royce models, few vehicles can match how incredibly quiet and smooth the Ghost is. That sure is lovely, but given that some rivals come close to that luxury for significantly less money, is the Ghost worth it?
With its strong, silent V-12 engine and incredible refinement, the Ghost is very nice to drive . But it's not exactly fun to drive, given the light steering and relaxed responses to its controls. Upgrading to Black Badge specification doesn't help much. Nevertheless, the Ghost is a stupendous car, packed full of materials and design details of the highest craftsmanship and quality. It's very expensive, but the Ghost could be worth it for drivers who demand luxury beyond reproach.
Top-Ranked Competitors:
MotorTrend Tested
Under the Ghost's long hood is a 6.75-liter twin-turbocharged V-12 engine, backed by an eight-speed automatic transmission with AWD.
As standard, the Ghost's engine produces 563 hp and 627 lb-ft of torque. Acceleration from 0 to 60 mph took 4.2 seconds in MotorTrend testing.
In Black Badge specification, output rises to 592 hp and 664 lb-ft, which should reduce the 0–60 mph acceleration time to approximately 4.0 seconds.
MPGs
Fuel economy for the Ghost is approximately 12/19 mpg city/highway, figures that won't cause the slightest bit of bother to anyone who can afford the car in the first place.
Safety Ratings and Features
Driver assist and active safety features on the Ghost include:
Front automatic emergency braking
Lane keep assist
Blind-spot monitoring
Adaptive cruise control
Seating Configurations
The Ghost can be built to seat five occupants by equipping the three-across rear bench seat. Alternatively, a rear seat with a fixed center console is available, reducing capacity to four but improving comfort for rear passengers.
Technology
Infotainment
In addition to a digital gauge display, the Ghost comes equipped with a 12.3-inch infotainment touchscreen compatible with Apple CarPlay and Android Auto. Mobile app integration allows for remote viewing of the vehicle's location and functions. Various USB ports and a wireless charging pad keep devices powered up.
Sound System
The Rolls-Royce Bespoke audio system in the Ghost comprises 18 speakers and a 1,400-watt amplifier.
Available Upgrades
By choosing the Rear Theatre Configuration, the front seatbacks gain a 12.0-inch touchscreen for each rear passenger to use. Other upgrades include a 360-degree camera and head-up display.
Value
Standard Features
As standard, the Ghost comes equipped with luxurious features including heated front and rear seats, power-closing doors, front and rear parking sensors, an illuminated grille, and a polished Spirit of Ecstasy figurine at the front of the hood. Standard 20-inch wheels can be upgraded to 21 or 22 inches.
Recommended Trim
Get the standard Ghost in your dream configuration, or the Extended version if you plan to hire a chauffeur for the car. Skip the Ghost Black Badge, as its suspension tune roughens the ride without delivering a commensurate increase in sportiness and driving enjoyment.
Ghost Extended
For buyers seeking a chauffeur-driven car, the Ghost Extended could be a good choice. This model has a longer wheelbase and body than the standard Ghost, adding 6.7 inches of second-row legroom on top of the 42.3 inches already offered.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
The Drive
4 hours ago
- The Drive
If You Need a Car Part That Doesn't Exist, Talk to This Guy
The latest car news, reviews, and features. 3D printing democratizes manufacturing in ways that have real, positive implications for car enthusiasts. Need a little trim piece that's been discontinued since the '80s? 3D printing lets you remake one and allows you to make it better with your own tweaks. And the opportunities for creativity are endless. A few months ago, I started a thread with Ben Bishop, who has a little operation making custom parts and recreating unobtainable items for people's car projects. He shared some interesting insight on his process and how 3D printing is empowering some cool cottage-industry innovation. As a lover of creative car customization and small industrial enterprises in general (surely I'm not the only one), I thought it'd be fun to share the process Bishop goes through to design and create custom 3D parts through his U.K.-based outfit, BWB Designs. Over email, he answered my questions about his work and explained what his process is like, whether he's reverse-engineering a rare or no-longer-available part or creating something from scratch. Bishop has built things from small and practical, like this Mini vent gauge pod, to the large and unique, like this nose cone for a homemade Ariel Atom replica. BWB Designs If somebody already has a part they want replicated, 'then they can either post the part directly to me for replication, or they can scan the part themselves and send me the scans,' Bishop told me. 'If they post the part to me it allows me to either scan or measure the part for direct CAD modeling. I can then advise the client on design suggestions which may help to optimize the 3D printing process. For example, by increasing thickness in certain areas, adding features which improve the printability or implementing hardware like heat-sert threads to help the functionality as best as possible. Once we work through and come to a finalized design, we test print and fit the part. This process was used for the CR-X door inserts as well as the CR-X License plate light holder as well as many other small parts. 'If they plan on scanning the part, I ask for a set of check dimensions to ensure accuracy with the scans as best [as] possible. Whilst also checking dimensions on my model throughout the design process. After that, we can follow the same steps as previously mentioned to achieve an end product. This process was used with the Chevy C10 Dash AC Bezel.' A Chevy truck cluster bezel to scan (bottom right), digitally rendered (left), then 3D printed in replica (top right). BWB Designs Bishop explained to me that he's able to help people in different ways depending on the equipment the customer has on their end. If you can scan and print things at home, he can fine-tune the render to ensure the scanned image becomes a high-quality printable file. If you only have a scanner, he can optimize a design and print it for you. If you don't have anything, you can mail the part you want copied, and BWB will do the rest. Of course, sometimes you don't have an example part to start from. Bishop told me about how he recreates factory parts without a physical template, too. Reference photos, any known specs, specs of surrounding and adjacent parts, anything adjacent that can be scanned … a bit more imagination and time is required. 'This was the process used to create the CR-X recessed headlight shrouds, my client posted the OEM headlight for me to take mounting points off and gather a set of general dimensions. I then researched the rare option, gathering photos and information to produce the final product. I can use the images to obtain scales and proportions for the model, as well as getting a good idea on angles of certain features. Combining that with the set of dimensions from the OEM headlight, implementing the mounting points and also fitment for a standard light type allowed me to produce an end product which the client was very satisfied with!' Finding these headlight shrouds for a first-gen CRX in perfect condition would be nearly impossible, and convincing a big aftermarket parts factory to re-make them for a single customer is unlikely. This is where small outfits like Bishop's can shine. BWB Designs When it comes to completely custom stuff, Bishop told me he works with that too. When there's no part to replicate, he told me that he can make things from scratch using broad dimensions and mounting points. He's done everything from gauge pods to intake pipes to whole aero kits. 'With the use of modern technology, we can create pretty much anything with a phone, tape measure, and some imagination,' Bishop explained. 'Using phones to scan isn't always the most accurate or high-quality process, but with some reworking and optimizations on my end in combination with check dimensions, we can get to a point where the scan is good enough to work off. The Audi 4M Q7 intake was made with a phone scan. As well as a couple [of] current projects, which are currently underway, using phone scans on a larger scale to build a front splitter as well as an entire body kit.' Bishop custom-made this Audi intake pipe in a larger-than-stock diameter and without its factory baffle restrictor. If you're interested in doing something like this for your own car, just remember, there's more to engine tuning than more air means more power. Any mod to a vehicle's intake system should be paired with a custom computer tune optimized on a dyno. BWB Designs My favorite innovation of Bishop's is this wild AW11 MR2 cooling vent system. As Bishop posted on his website [sic] : 'Using 3D Scans, we worked to fit in the ducts around the existing constraints of the engine bay. A goal was to maintain the OEM Sunroof storage, as well as various other obstacles to work around. 'The end product was printed in ASA-CF, then skinned with carbon fiber for an aesthetically pleasing and high-performance finish. The firewall through-mounts and hood vent were SLS Printed in PA-12 nylon for a strong and high-quality product.' This air piping even keeps the OEM sunroof storage functionality in place. BWB Designs So far, Bishop's business has just been directly working with individuals to make their small-batch parts production dreams come true. But some of his creations have ended up being replicated in slightly bigger batches. If you're the kind of person who would go through the trouble of getting a CR-X headlight shroud custom-made, you probably know other CR-X dorks who might also want such a piece. 'I encourage all of my clients to market the products I design for them, where applicable, even if they hadn't planned on doing so,' said Bishop. 'A lot of the time, being connected with their own communities allows them to sell at least a few of the parts to cover my costs of design. It works out as a win-win for everybody involved.' As for why he does what he does, besides being a car enthusiast and industrially creative, Bishop told me: 'Part of the satisfaction is knowing I am doing something to keep the car community alive, maintaining the machines we all know and love so we can carry on doing what we do. This whole process contributes to reducing how many cars we scrap and get rid of, reducing pollution and waste in our industry. We can even use recycled and recyclable materials to produce these new parts.' In the future, 3D scanning and printing of roadworthy components might be doable with equipment you can buy at Staples, with AI handling the rendering in between. But until then, outfits like Bishop's here are a huge boon for car culture. I can't tell you how long I've looked for stupid little trim pieces on my mildly obscure cars like my old Nissan 300ZX; I could have skipped a lot of fruitless searching with a service like this. So next time you're coming up empty trying to find a little plastic piece that's no longer available, see if somebody like Bishop can scan, redesign, and 3D print it for you! Know about any other cool car cottage industry operations? Drop us a line at tips@
The Drive
5 hours ago
- The Drive
Another Mercedes-AMG One Has Burned to the Ground
The latest car news, reviews, and features. The world is short yet another Mercedes-AMG One this week after what appeared to be a very public conflagration somewhere in Germany. As is typical with a situation like this, information is thin on the ground, but unless there's big money to be made in faking videos of obscure supercars catching fire, we're inclined to believe everything is on the up-and-up. @chrimbu AMG ONE ein heisser Sportwagen 🤣, wäre besser ohne Lithium Ion Akku🤔🤷♂️ ♬ The Sound of Silence (CYRIL Remix) – Disturbed It's hard to tell much from this low-res video, but the Exclusive Car Registry has several photos of the car prior to the mishap, along with some basic production data about the car itself. It's all crowdsourced, so take it with a grain of salt, but we'd buy that the exterior was Emerald Green Metallic before it was blackened by all that smoke. It's listed as a 2023 model, and the current description is as succinct, but exhaustive: 'Burnt down.' That site's listing, plus the Mercedes' German license plate and Feuerwehr markings on the vehicle in the background (German for 'Fire Department') indicate that the incident took place in Germany. Indeed. As we noted off the top, this isn't the first AMG One that has apparently self-immolated. Back in May of 2023, another example caught fire inside a car transporter, leaving nothing but a carbon-glazed pile of rubble: Um Mercedes-AMG ONE pegou fogo. A unidade estava no guincho, sendo rebocada no M6, em Staffordshire, quando explodiu em chamas.A Mercedes está investigando o incêndio no motor híbrido, que aconteceu quando seu motor estava desligado. 🗞️ | The Sun — Mercedes-AMG F1 Brasil 🇧🇷 (@MercedesAMGF1BR) May 22, 2023 Development of the electrified hypercar was a headache for AMG. Essentially, Mercedes-Benz asked its performance car division to wrap a street car body around a Formula 1 drivetrain. The company's engineers were well aware of the challenges it faced, but the unprecedented adaptation nonetheless ended up taking nearly a year longer than planned to develop. If the early productions numbers are to be believed, Mercedes only built 275 of these for the general public. As an owner, that means the odds of your car catching fire are still less than 1 in 100—a risk most of us would be willing to take to say we own a 1,000-horsepower, 11,000-RPM monster that is essentially an F1 car for the street. Got a tip? Send us a note at tips@
Car and Driver
6 hours ago
- Car and Driver
View Photos of the 2026 Bentley Bentayga Speed
Bentley has brought the Speed nameplate back to the Bentayga SUV. The 2026 Bentayga Speed is now powered by a twin-turbocharged V-8 engine instead of the W-12 powertrain featured in the previous model, which was last sold in the 2023 model year. Read the full story
