logo
Here's How to Clean Your Disgusting Beer Glasses

Here's How to Clean Your Disgusting Beer Glasses

WIRED5 hours ago

Jun 25, 2025 11:06 AM Tired of those tiny bubbles on the side of your glass? Here's how to have sparkling pours forever.
All products featured on WIRED are independently selected by our editors. However, we may receive compensation from retailers and/or from purchases of products through these links.
Once you notice it, it will ruin your life: Bubbles on the side of beer, cider, or even champagne glasses that haven't been properly cleaned. What starts out as a mild annoyance turns into massive frustration when you learn more about what it's taking from your beverage: improperly cleaned and rinsed glasses can affect carbonation, flavor, and—most importantly—head retention. That's right: Badly cleaned glasses rob you of precious foam!
As I became a beer writer and homebrewer (shout out to the Portland Brewers Collective), I learned how much dirty glasses were robbing me of precious liquid joy. When I stumble across a dirty glass at a local Portland bar, I immediately question the rest of the operation. I've even sadly begun bringing that professional judgment into my personal life. In the past several years, I can't tell you how many housewarmings, birthday parties, or other events I've attended that have gross-looking beer glasses.
The good news is that this is a solvable problem! With a couple simple products and a tiny amount of elbow grease, you can have 'beer clean' glasses forever. I even have a couple tips for quickly sorting out any glasses you find gross at a pal's. The Problem
The issue is a buildup on the inside of the glass. Any kind of buildup, whether it be hard water residue, oils from lips, or not-quite-clean sponges and towels, can lead to bubbles on the side of your glass. When there is a disruption in the smooth surface area on a glass, bubbles begin to form there. That's why fancy beer glasses often have etching in the middle of the bottom, so that you get a cool cascade of bubbles coming up to the top and reinforcing the foam.
These bubbles and foam are vital to a proper drinking experience for many reasons, but the primary one is that they are a huge vehicle for aroma (which is itself a huge vehicle for perceived flavor). This is also why brewers nearly always recommend drinking beer out of a glass, rather than a can or bottle: Your sense of smell is a huge part of your sense of taste, and the more you can smell your beer the better it will taste. Many folks (guilty as charged) even have specific beer glasses for specific styles of beer, with tulip-shaped glasses ($21) becoming increasingly popular for catching aroma. The Solution
While Budweiser's training video shows a three-step process involving a sanitizing step, at home you really just need a sink, a good brush ($14), a proper drying rack ($28), and some lipid-free cleaner ($25) to ensure amazingly gorgeous beer glasses forever. Short of that, a brush and a couple drips of Dawn dish soap ($15) also do the trick. Some folks claim the lipids (fats) in normal dish soaps mean they won't work, and while it is true that it's easier to use lipid-free soap, I have found that regular Dawn and the like work fine too. The key is in the rinsing.
Step one is to use clean water to rinse any dust or other dry particles out of the glass. Then take a bottle brush with a little bit of detergent and water and give the glass a good scrub, being sure to coat all surfaces. From there, rinse the ever-loving crap out of the glass and place it on an elevated drying rack (like the one you'd use to cool cookies), so that it can drip-dry quickly and evenly. Once dry, the beer glass can be placed upside down in a cupboard, so as not to get more dust in it while being stored.
Before drinking, simply take out the glass, give it a quick rinse with water, and pour your beer. The final water rinse (you'll notice special sprayers in bars for this purpose) is key to ensuring nothing dried weirdly on the glass before you put it away, and it also cools the glass a bit before you pour the beer, which helps with over-foaming. As an aside: There is nothing wrong with chilled beer glasses for certain styles. (I love an ice-cold Japanese lager in a frozen pint glass as much as the next guy.) But you'll want to keep them as clean as possible and not pre-rinse them before pouring beer. It's harder to have a 'beer clean' ice-cold glass than one you can rinse from the cupboard, and bear in mind what else you have in the freezer, lest you have weird-smelling glasses. For the Lazy
If you're lazy like me and tend toward washing things in the dishwasher in bulk, you can just do the entire 'beer clean' glass process (including scrubbing and detergent) just before you pour your beer, then use a dish towel to dry the outside of the glass.
If washing beer glasses in the dishwasher (many folks say not to do this, but I do it with good results all the time), it's key to make sure that your rinse agent ($30) container is properly filled and your dishwasher's drain is running properly. Rinse agents do a great job of preventing hard-water buildup over time, and generally make it easier to get a clean glass. Also, be aware that logos and paint will eventually wear off in the dishwasher, so hand wash anything you really want to preserve.
If you have a glass you think is beyond saving, I've had good luck with a dedicated brush and barkeeper's friend, which also helps clean stainless steel appliances. You can also use vinegar (some folks use this instead of a rinse agent in the dishwasher), which dissolves those hard spots.
Once your glass is clean and rinsed, it's time for a beer: Sláinte, kanpai, na zdrowie, gun bae, prost, and bottom's up!

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

American Airlines plane makes emergency landing after engine starts smoking
American Airlines plane makes emergency landing after engine starts smoking

Fox News

timean hour ago

  • Fox News

American Airlines plane makes emergency landing after engine starts smoking

An American Airlines plane made an emergency landing in Las Vegas on Wednesday after smoke and sparks were seen spewing from one of its engines. American Airlines Flight 1665 was forced to return to Harry Reid International Airport in Las Vegas (LAS) shortly after takeoff due to a mechanical issue, the airline said in a statement. Video from an eyewitness shows dark smoke trailing behind the plane's engines midair. Sparks could also be seen going off from its right engine. The plane, which was scheduled to fly from LAS to Charlotte Douglas International Airport (CLT), was carrying 153 customers and six crew members, American Airlines said. The statement reads, in part, "The aircraft taxied to the gate under its own power, and customers deplaned normally. "We appreciate the professionalism of our crew and thank our team, who are working to get our customers to their destinations as quickly as possible. No injuries were reported. The aircraft is being taken out of service and will be evaluated by American Airlines' maintenance team, the company said. The aircraft type was not immediately made public. The Federal Aviation Authority (FAA) said it is aware of the incident and that Flight 1665 was an Airbus A321. "American Airlines Flight 1665 returned safely to Harry Reid International Airport in Las Vegas around 8:20 a.m. local time on Wednesday, June 25, after the crew reported an engine issue," the agency said in a statement. "The Airbus A321 was headed to Charlotte Douglas International Airport. The FAA will investigate." Harry Reid International Airport was previously known as McGarran International Airport.

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store