Secretive ‘Dark Eagle' hypersonic missile launches from Cape Canaveral
After a successful test from Cape Canaveral Space Force Station last December, the Army on Thursday officially named its long-range hypersonic weapon 'Dark Eagle.' The system designed to 'disintegrate adversary capabilities' was at it again Friday morning.
Images posted to social media showed the missile launch from Canaveral's Space Launch Complex 46 while the Eastern Range had posted keep-out notices and warnings for maritime and airspace.
'A combined team of government, academic and industry partners conducted a test on behalf of the Department of Defense from a test site at Cape Canaveral Space Force Station,' according to a statement from the Office of the Secretary of Defense. 'We are currently evaluating the results of the test.'
The action on the Space Coast comes a day after the Army officially dubbed the defense system with its new moniker.
'Part of the name pays tribute to the eagle — a master hunter known for its speed, stealth and agility — due to the LRHW's combination of velocity, accuracy, maneuverability, survivability and versatility,' reads a press release from the DOD. 'In addition, the bald eagle — our national bird — represents independence, strength and freedom.'
The release further explained the 'dark' portion of the name refers to the hypersonic weapon's ability to 'disintegrate adversary capabilities, including anti-access/area-denial systems, communications capacity, long-range fires and other high-payoff/time-critical targets.'
The December test was a combined effort of the Army's Rapid Capabilities and Critical Technologies Office and the Navy's Strategic Systems Programs, an effort for the two branches to use the same weapon system and reduce testing timelines and cost.
'Hypersonic weapons will complicate adversaries' decision calculus, strengthening deterrence,' said Patrick Mason, senior official performing the duties of the Assistant Secretary of the Army for Acquisition, Logistics and Technology. 'Their speed, accuracy and versatility are befitting its new popular name, Dark Eagle.'
SLC 46 had most recently hosted a pair of Astra Space rocket launches in 2022 before its use of late for DOD testing.
The launch apparatus uses a battery operations center and transporter erector launcher sending the missile streaking east over the Atlantic.
The December test was the system's first 'live-fire event,' DOD stated.
The system is meant to be deployed on land or sea. Hypersonic missiles travel at more than five times the speed of sound offering a much more difficult weapon to counter after launch.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
a day ago
- Yahoo
Beyond Ordinary Software Solutions Announces PromptCon, a Virtual Conference Exploring the Power and Ethics of Prompt Engineering
San Diego, California--(Newsfile Corp. - June 2, 2025) - Beyond Ordinary Software Solutions, a San Diego-based software and research consultancy known for its advanced cybersecurity development for both enterprise-level clients and Department of Defense stakeholders, today announced the launch of PromptCon, a new virtual conference dedicated to raising awareness of AI and LLMs and their emerging role in our society. The three-day online event will take place November 4-6, 2025, and will feature three focused tracks oriented around AI systems: Application, Innovation, and Social Implications. PromptCon aims to provide a high-level forum for practitioners, researchers, and industry leaders navigating the expanding role of AI and LLMs across business, government, and society. The event will feature over 30 curated sessions and is currently accepting speaker applications for 40 open presentation slots. "PromptCon is for anyone serious about using LLMs not just as novelties, but as infrastructure," said Jacob Anderson, founder and CEO of Beyond Ordinary. "We're designing this conference for builders, researchers, strategists, and skeptics-people asking hard questions and shipping real tools. From optimizing back-end workflows to interrogating the ethical impact of AI on entry-level workforces, this is about sharpening the signal, not adding to the noise." The agenda spans three thematic tracks: Applications: Tactical sessions on LLM and AI deployment in business operations, workflow automation, and enterprise integration. Innovation: Deep dives into cutting-edge tools, open-source frameworks, agent testing, and performance optimization. Social Implications: Panels and talks on misinformation, bias, labor impact, ethical frameworks, and inclusive AI development. Jacob Anderson, Founder of Beyond Ordinary and PromptCon To view an enhanced version of this graphic, please visit: Confirmed speakers include: Andrew Brooks (CEO of on calculating ROI in enterprise AI deployments Kham Inthirath (CEO of Compound Effect), on LLMs as co-pilots in day-to-day business operations Jared Zoneraich (Founder of PromptLayer), on practical testing strategies for AI agents Chris Gee (Founder of Chris Gee Consulting), on AI's emerging influence on entry-level jobs Andrew Barrow (Founder of Revenue Arc), on Strategizing AI Innovation for Competitive Advantage Each day will begin with a keynote and conclude with cross-track discussions connecting technical insights to broader societal implications. PromptCon is hosted by Beyond Ordinary Software Solutions, a boutique software firm with deep roots in cybersecurity, machine learning, and national defense. The company has developed many advanced information systems across secure data handling, adaptive UI, cryptography, and predictive modeling primarily for the private sector, and more recently the Department of Defense and other federal agencies. Speaker submissions are open through September 15. Selected speakers will join a diverse lineup of technologists, executives, and researchers contributing to a focused and highly practical AI event. AI experts interested in applying to be speakers can reach out to Jacob Anderson directly. About Beyond Ordinary Software Solutions Beyond Ordinary Software Solutions is a San Diego-based software development firm specializing in secure, high-performance systems across federal and commercial sectors. With decades of experience supporting the Department of Defense, Beyond Ordinary brings deep expertise in cybersecurity, AI integration, user interface engineering, and scalable architecture. Learn more at Contact:Jacob Andersonjwa@ To view the source version of this press release, please visit Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
26-05-2025
- Yahoo
A 17-year-old designed a cheaper, more efficient drone. The Department of Defense just awarded him $23,000 for it.
Cooper Taylor, 17, aims to revolutionize the drone industry with a new design. Taylor designed a motor-tilting mechanism to lower manufacturing cost and increase efficiency. His innovation won awards at science competitions adding up to $23,000. Cooper Taylor is only 17 years old, but he's already trying to revolutionize the drone industry. Taylor has spent the last year optimizing a type of drone that's being used more and more in agriculture, disaster relief, wildlife conservation, search-and-rescue efforts, and medical deliveries. His design makes the drone more efficient, customizable, and less expensive to construct, he says. He's built six prototypes where he 3D-printed every piece of hardware, programmed the software, and even soldered the control circuit board. He says building his drone cost one-fifth the price of buying a comparable machine, which sells for several thousand dollars. Taylor told Business Insider that he hopes "if you're a first responder or a researcher or an everyday problem solver, you can have access to this type of drone." His innovation won him an $8,000 scholarship in April at the Junior Science and Humanities Symposium, funded by the Department of Defense. Then, on May 16, he received an even bigger scholarship of $15,000 from the US Navy, which he won after presenting his research at the Regeneron International Science and Engineering Fair. "Ultimately having people in STEM careers is a matter of national security," Winnie Boyle, the senior director of competitions at the National Science Teaching Association, which administers JSHS, told BI. Even though most students who compete won't end up working in the military, she added, "we as the community will still benefit from the research that they're doing." It all started when Taylor's little sister got a drone, and he was disappointed to see that it could only fly for about 30 minutes before running out of power. He did some research and found that a vertical take-off and landing (VTOL) drone would last longer. This type of drone combines the multi-rotor helicopter style with the fixed wings of an airplane, making it extremely versatile. It lifts off as a helicopter, then transitions into plane mode. That way it can fly further than rotors alone could take it, which was the drawback to Taylor's sister's drone. Unlike a plane-style drone, though, it doesn't need a runway and it can hover with its helicopter rotors. The problem is that VTOL drones are very expensive. As Taylor learned more about them, though, he realized he could improve a key inefficiency and maybe drastically reduce their cost. VTOL drones use helicopter-style rotors to lift off straight from the ground, but once airborne, the motors running those rotors turn off and the drone switches to a plane-style motor to travel horizontally. Motors are some of the most expensive parts of a drone, Taylor said, so having some motors sit idle during flight is "a big waste of cost and a big waste of energy." He wanted to solve this problem by designing a motor that could start out helicopter-style for liftoff, then tilt back to become an airplane-style motor. That's not a new concept. Aerospace companies have tinkered with tilting rotors for decades, according to David Handelman, a senior roboticist at the Johns Hopkins Applied Physics Laboratory. However, Taylor designed his rotor-tilting drone to be completely 3D-printed and completely modular. A user can pop the tail and wings out of their sockets and replace them with any custom appendages. Similarly, a port for cameras or scientific instruments leaves room for customization. The cost savings come from the fact that his drone uses fewer motors, but the modular nature means users could upgrade or replace parts of the drone for a lower cost than buying a whole new drone. Handelman, who mentored the high schooler, told BI in an email that Taylor's drone "could appeal to users who need a versatile platform but can't afford large or complex systems." Taylor spent an entire summer solving this VTOL problem. "It was a wonderful summer, really focused," Taylor said. "I'd wake up, I'd go into my basement, I'd work on the drone, I'd look outside, and it's 12 a.m." When he hit a barrier in his knowledge of coding, design, or circuitry, he would look for advice in online forums or take a relevant course on the website Udemy. His first three prototypes crashed. One of them soared 50 feet up and then face planted. "That sort of hurt. That's a few hundred hours right there," Taylor said. Each flight and crash revealed a problem he needed to fix until, finally, the fourth drone flew and touched down in one piece. "I actually love doing this," Taylor said. "It's so much fun for me." Taylor's latest prototype weighs about 6 pounds with a wingspan a little over 4 feet. He's flown it for up to 15 minutes at a time, but he has calculated that at the rate it uses power it should last for 105 minutes cruising at 45 mph. He doesn't want to push those limits just yet though. "Cooper brought both curiosity and discipline to the project, working at a level I usually see in strong college students," Handelman said. "The fact that he got the aircraft flying is a testament to his persistence, creativity, and problem-solving ability." Now Taylor is building his seventh iteration of the drone. Eventually, he wants to make it small enough to remove the wings and fit it in a backpack. This summer, though, the high schooler says he'll be working on a different drone project through a program with the Reliable Autonomous Systems Lab at MIT. Read the original article on Business Insider
Business Insider
26-05-2025
- Business Insider
A 17-year-old designed a cheaper, more efficient drone. The Department of Defense just awarded him $23,000 for it.
Cooper Taylor is only 17 years old, but he's already trying to revolutionize the drone industry. Taylor has spent the last year optimizing a type of drone that's being used more and more in agriculture, disaster relief, wildlife conservation, search-and-rescue efforts, and medical deliveries. His design makes the drone more efficient, customizable, and less expensive to construct, he says. He's built six prototypes where he 3D-printed every piece of hardware, programmed the software, and even soldered the control circuit board. He says building his drone cost one-fifth the price of buying a comparable machine, which sells for several thousand dollars. Taylor told Business Insider that he hopes "if you're a first responder or a researcher or an everyday problem solver, you can have access to this type of drone." His innovation won him an $8,000 scholarship in April at the Junior Science and Humanities Symposium, funded by the Department of Defense. Then, on May 16, he received an even bigger scholarship of $15,000 from the US Navy, which he won after presenting his research at the Regeneron International Science and Engineering Fair. "Ultimately having people in STEM careers is a matter of national security," Winnie Boyle, the senior director of competitions at the National Science Teaching Association, which administers JSHS, told BI. Even though most students who compete won't end up working in the military, she added, "we as the community will still benefit from the research that they're doing." A drone that blends plane and helicopter It all started when Taylor's little sister got a drone, and he was disappointed to see that it could only fly for about 30 minutes before running out of power. He did some research and found that a vertical take-off and landing (VTOL) drone would last longer. This type of drone combines the multi-rotor helicopter style with the fixed wings of an airplane, making it extremely versatile. It lifts off as a helicopter, then transitions into plane mode. That way it can fly further than rotors alone could take it, which was the drawback to Taylor's sister's drone. Unlike a plane-style drone, though, it doesn't need a runway and it can hover with its helicopter rotors. The problem is that VTOL drones are very expensive. As Taylor learned more about them, though, he realized he could improve a key inefficiency and maybe drastically reduce their cost. VTOL drones use helicopter-style rotors to lift off straight from the ground, but once airborne, the motors running those rotors turn off and the drone switches to a plane-style motor to travel horizontally. Motors are some of the most expensive parts of a drone, Taylor said, so having some motors sit idle during flight is "a big waste of cost and a big waste of energy." He wanted to solve this problem by designing a motor that could start out helicopter-style for liftoff, then tilt back to become an airplane-style motor. That's not a new concept. Aerospace companies have tinkered with tilting rotors for decades, according to David Handelman, a senior roboticist at the Johns Hopkins Applied Physics Laboratory. However, Taylor designed his rotor-tilting drone to be completely 3D-printed and completely modular. A user can pop the tail and wings out of their sockets and replace them with any custom appendages. Similarly, a port for cameras or scientific instruments leaves room for customization. The cost savings come from the fact that his drone uses fewer motors, but the modular nature means users could upgrade or replace parts of the drone for a lower cost than buying a whole new drone. Handelman, who mentored the high schooler, told BI in an email that Taylor's drone "could appeal to users who need a versatile platform but can't afford large or complex systems." If you crash at first, try, try again Taylor spent an entire summer solving this VTOL problem. "It was a wonderful summer, really focused," Taylor said. "I'd wake up, I'd go into my basement, I'd work on the drone, I'd look outside, and it's 12 a.m." When he hit a barrier in his knowledge of coding, design, or circuitry, he would look for advice in online forums or take a relevant course on the website Udemy. His first three prototypes crashed. One of them soared 50 feet up and then face planted. "That sort of hurt. That's a few hundred hours right there," Taylor said. Each flight and crash revealed a problem he needed to fix until, finally, the fourth drone flew and touched down in one piece. "I actually love doing this," Taylor said. "It's so much fun for me." Taylor's latest prototype weighs about 6 pounds with a wingspan a little over 4 feet. He's flown it for up to 15 minutes at a time, but he has calculated that at the rate it uses power it should last for 105 minutes cruising at 45 mph. He doesn't want to push those limits just yet though. "Cooper brought both curiosity and discipline to the project, working at a level I usually see in strong college students," Handelman said. "The fact that he got the aircraft flying is a testament to his persistence, creativity, and problem-solving ability." Now Taylor is building his seventh iteration of the drone. Eventually, he wants to make it small enough to remove the wings and fit it in a backpack. This summer, though, the high schooler says he'll be working on a different drone project through a program with the Reliable Autonomous Systems Lab at MIT.
