PGE's project involving Forest Park tree removal moves forward after public hearings
PORTLAND, Ore. (KOIN) — After hearing arguments in January, Portland General Electric is moving forward with their plan to remove nearly 400 trees in Forest Park to help ensure stable electricity and mitigate wildfire risks in the area.
The plan, known as the Harborton Reliability Project, has been met with pushback from local environmental activists who argued that the project would affect Forest Park's plant and animal communities, although others have shown support calling the project the 'least-impact solution' for meeting growing power needs.
On Monday, PGE confirmed that the project would be moving forward with it's third phase, including the removal of 376 trees on five acres near the north end of Forest Park.
$400M in Oregon Measure 110 funds set for addiction treatment
In a statement, PGE Vice President of Policy and Resource Planning Kristen Sheeren said the work being done is essential for 'safe, reliable and increasingly clean energy' for Portland.
'The decision to approve PGE's permit request is an example of the process working as it should, and will allow PGE to proceed with work that is crucial for safe, reliable and increasingly clean energy for Portland homes and businesses. The decision to approve this permit request constitutes the most significant finding of facts about this project coming out of an extraordinarily detailed application process that included extensive public involvement. We appreciate that this decision weighed all evidence and found that the project is needed and meets the stringent requirements for work within an existing utility easement, including extensive plans to improve forest health and wildfire safety.'
According to the timeline on PGE's website, the project will be underway through 2027 and will include site restoration.
Prior to the initial hearing, PGE also promised to plant 398 Oregon white oaks and 418 short stature trees.
Copyright 2025 Nexstar Media, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Associated Press
2 days ago
- Associated Press
Troy Minerals Reports Drilling Results from the Lake Owen Project, Wyoming
Show 240.73 meters of Critical Metal Mineralization, Iron, Titanium, Vanadium, Scandium and Gallium VANCOUVER, BC / ACCESS Newswire / June 4, 2025 / Troy Minerals Inc. ('Troy' or the 'Company') (CSE:TROY)(OTCQB:TROYF)(FSE:VJ3) is pleased to announce that complete results from Hole LO24-01 show strong critical metal mineralization over continuous 240.73 meters (from 10.67 meters to 251.40 meters) from its maiden drilling program on its 100% owned Lake Owen Project (the 'Project'), located 50 km southwest of Laramie, Wyoming, USA (see Figures 1,2). The Project is a Proterozoic layered mafic intrusion complex historically explored for Platinum Group Elements (PGE). Similar to the Stillwater Complex in the USA and the Merensky Reef of South Africa, the Lake Owen Complex shows strong potential for vanadium, titanium, PGE, and associated metals. In late 2024, the Company drilled two diamond holes totaling 607.77 meters near the southwestern claims' boundary (see Figure 3), marking Troy Minerals' first drill holes on the Project. These holes targeted titanium (TiO2) and vanadium (V2O5) mineralization linked with magnetite in gabbro, as well as reef-style PGE mineralization (see Company News Release dated February 28, 2025). A first pass of selective sampling of the drill holes had been carried out and demonstrated presence of anomalous titanium and vanadium mineralization. Elevated values of vanadium are correlative with the titanium. Sampling was selected to assess various lithological units and all zones with magnetite content up to 15-20% and/or visible sulfide mineralization. Magnetite content in the gabbro in hole LO24-01 is consistently about 5-10%. In LO24-01, the initially limited sampling suggested a large zone of titanium and vanadium-enrichment and higher relative values correlate well with the green gabbro. Associated with these anomalous zones have been elevated concentrations of scandium. Based on these initial results, additional infill sampling through all prospective lithologies was carried out by Company personnel in January, 2025. Results exhibit robust critical metal mineralization over 240.73 meters in hole LO24-01, including: Concurrent with Company infill sampling, geologists from the USGS and Wyoming State Geological Survey (WSGS) collected samples for Whole Rock, Major Oxides, and thin section analyses. Results of the USGS and WSGS work are pending. 'Our recent geological and geophysical findings, coupled with promising initial drilling results, are significantly enhancing our confidence in the Lake Owen Project. Each new insight reinforces our belief that this project deserves a robust exploration budget in the near future.' Said Yannis Tsitos, President of Troy. 'Beyond the historically recognized high grades of iron, titanium, and vanadium, the recent discovery of scandium and gallium-critical metals essential for applications in metal alloys, military and civil aviation, semiconductors, electric vehicles, and solar panels-underscores the project's immense potential for both our Company and the State of Wyoming in USA. We are committed to maximizing shareholder value through strategic development plans for Lake Owen, alongside our silica and rare earth element (REE) initiatives.' Table 1: Drill hole specifications Drill hole LO24-01 was designed to test the extent of the Lower Mag Gabbro down to the basement contact. Drilling revealed a series of interlayered magnetic gabbro and a distinctive coarse-grained green gabbro. The green coloration is imparted by pyroxenes altering to chlorite. These layers are generally constrained to widths of less than 4 metres. Table 2: Drill hole LO24-01 intersections 1: All intersections lengths are drill indicated thicknesses; insufficient work has been completed to reliably determine true thicknesses. 2: Elemental geochemical analyses were converted to oxides using following conversion factors Titanium - 1.6681, Vanadium - 1.7852, Iron - 1.2865, Scandium - 1.5338, Gallium - 1.3442 Drill hole LO24-02 intersected gabbroic units that are weakly magnetic and contain no anomalous values of titanium, vanadium, or scandium. This drill hole was collared deeper in the sequence than hole LO24-01; further down dip and stratigraphically lower in the Lower Mag Unit. Drill core was detail logged and sampled by Company staff. Core was split by saw with samples sent to ALS Global's laboratory in Reno, NV for preparation and analysis. Samples were analyzed for multi-elements (ME-MS61). The Company's quality control monitoring consisted of inserting certified reference and blank material in the sample stream. No quality control issues were identified. Only a very small portion of the Lake Owen Complex and therefore our Claims has been drill-tested to date. As currently mapped, the prospective Lower Mag Gabbro unit continues along strike to the west. The Company has yet to drill test the stratigraphically higher Upper Mag Gabbro. Surface mapping and sampling in 2023 identified two massive magnetite rock samples that returned 8.812% TiO2 and 0.548% V2O5, and 15.505% TiO2 and 0.586% V2O5 respectively (Figure 5). These represent priority drill targets for 2025. An historical drill hole was completed here not by Troy, but there was no assessment of titanium, vanadium, or scandium. Troy Minerals is planning its summer fieldwork for the Lake Owen Project. After analyzing airborne geophysical data, as reported in the May 21, 2025 news release, Troy will collect soil samples and conduct geological mapping and sampling. The aim is to refine drill targets for the 2026 season, including a relevant drilling pads application. Qualified Person The information contained in this news release has been reviewed and approved by Ted Vander Wart, a consultant to the Company, who is a qualified person as defined under National Instrument 43-101. About Troy Minerals Troy Minerals is a Canadian based publicly listed mining company focused on building shareholder value through acquisition, exploration, and development of strategically located 'critical' mineral assets. Troy is aggressively advancing its projects within the silica (silicon), vanadium, and rare earths industries within regions that exhibit high and growing demand for such commodities, in both North America and Central-East Asia. The Company's primary objective is the near-term prospect of production with a vision of becoming a cash-flowing mining company to deliver tangible monetary value to shareholders, state, and local communities. ON BEHALF OF THE BOARD, Rana Vig | CEO & Director Telephone: 604-218-4766 Email: [email protected] Forward-Looking Statements Statement Regarding Forward-Looking Information: This release includes certain statements that may be deemed 'forward-looking statements'. All statements in this release, other than statements of historical facts, that address events or developments that Troy Resources Inc. (the 'Company') expects to occur, are forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words 'expects', 'plans', 'anticipates', 'believes', 'intends', 'estimates', 'projects', 'potential' and similar expressions, or that events or conditions 'will', 'would', 'may', 'could' or 'should' occur. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in the forward-looking statements. Factors that could cause the actual results to differ materially from those in forward-looking statements include results of exploration activities may not show quality and quantity necessary for further exploration or future exploitation of minerals deposits, volatility of commodity prices, and continued availability of capital and financing, permitting and other approvals, and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and actual results or developments may differ materially from those projected in the forward-looking statements. Forward-looking statements are based on the beliefs, estimates and opinions of the Company's management on the date the statements are made. Except as required by applicable securities laws, the Company undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change. The Canadian Securities Exchange has not reviewed this press release and does not accept responsibility for the adequacy or accuracy of this news release. SOURCE: Troy Minerals Inc. press release
Yahoo
3 days ago
- Yahoo
PTX Metals Inc. Reports Further Highly Encouraging Drilling Results at Its W2 Cu-Ni-PGE and Gold Project
Toronto, Ontario--(Newsfile Corp. - June 3, 2025) - PTX Metals Inc. (TSXV: PTX) (OTCQB: PANXF) (FSE: 9PX) ("PTX" or the "Company"), a mineral exploration company focused on Cu-Ni-Au-PGE and Gold projects in Ontario, is pleased to release the following assay results from its Phase 1 of 2025 drilling program at the W2 Cu-Ni-PGE and Gold Project located in the Ring of Fire, northwestern Ontario, Canada (the "W2 Project"). Subsequently to the previous press release of May 27th, 2025, drill holes W225-08 and W225-12 are now being reported. Drilling has confirmed the presence of high-grade copper in multiple intervals above 1% Cu and consistent copper and nickel mineralization over broad widths in both drill holes W225-08 and W225-12. Additionally, drillhole W225-12 located in the CA2 zone of the Central Target, notably intercepted higher-grade palladium and platinum mineralization. This drill program has shown an improvement of both widths and grades from historical holes. Results from PTX's drilling include intersecting wide intercepts of encouraging grades near surface that continue to validate the potential of the exploration target issued last September, supporting a potential large bulk tonnage project. The results demonstrate a larger-scale system (~8 km in strike length) that encompasses the CA zones and the AP zones and a current goal to build a continuous system between CA1 and CA2 zones (see 3D geological model interpretation released on May 7th). Highlights - Drill Holes W225-08 and W225-12: Drillhole W225-08 intercepted a core length of 97.05m in the CA1 zone of near surface mineralization starting at 26.95m directly after the overburden. Drill hole W225-12, located in the CA2 zone 2.92 km to the East of CA1 zone, intersected 88.00m of sulphide mineralization demonstrating consistency of the mineralized body within the different identified zones. The highest grades by individual commodity in the two holes combined include: 1.80% copper, 0.74% nickel, 0.52 g/t gold, 1.05 g/t palladium and 0.55 g/t platinum and Cobalt 0.15% Drillhole W225-08 Drillhole W225-12 Table 1: Selected Results from drill holes W225-08 and W225-12. Intervals reported as core lengths. True widths are unknown at this time. To view an enhanced version of this graphic, please visit: Historical drilling was selective in assaying for all commodities and selective sampling procedures occurred. As a result, the Company has systematically assayed for Copper, Nickel, Gold, Palladium, Platinum and Cobalt and is now not reporting using Metal Equivalents and seen substantial improvements in the widths of mineralization with these practices. Additionally, for simplification purposes, Cu+Ni (%) and Au+Pt+Pd (g/t) are reported below as the arithmetic sum of individual commodity per interval chosen. Individual grades by commodity are also shown in table 1. Drill hole Analysis and Images: Drillhole W225-08, drilled into the CA1 Zone, was designed to infill and as a step out of hole 54004-0 drilled by Inco to the south, which reported some of the highest copper grade on the property [1] and a wide interval of consistent Nickel grade. The target was successfully intercepted starting from surface below the overburden at 26.95m depth and with 97.05m of mineralization within the main interval. Drilling has confirmed the presence of high-grade copper in multiple intervals above 1% Cu with up to 1.80% Cu and Nickel ranging between 0.20% and 0.70% within the mineralized interval as reported in Table 1 and in Figure 2. Drillhole W225-12 was designed to infill and as a step out of 130m to the east of W225-11 previously reported on May 27th, 2025. Both of PTX's holes showed not only higher-grade intervals but also a significant amount of palladium and platinum, where high-grade of 1.05g/t Pd was assayed in hole W225-12. Overall, the polymetallic system including copper, nickel, gold, platinum, palladium and cobalt occurs within consistent and similar wide intervals as shown in Figure 3. Figure 1: Plan Map showing CA1 and CA2 Zones along with drill hole locations for W225-08 and W225-12. Drillhole collars information is detailed in Table 2. Background is the reduced-to-pole total magnetic intensity (RTPTMI) derivative from the most recent Heli-GT 2025 magnetic survey. To view an enhanced version of this graphic, please visit: Figure 2: Cross section of drill hole W225-08, confirming historical drilling results in the CA1 zone previously intercepted in historical drill hole 54004-0. Refer to [1] below for historical drillholes data. To view an enhanced version of this graphic, please visit: Figure 3: Comparison side by side of grade of (Cu+Ni) and (Au+Pd+Pt) for drill hole W225-12. PGEs mineralization extends over 157m depth. To view an enhanced version of this graphic, please visit: High-grade individual commodity intersections within drill Hole W225-08 include: 1.53% Copper over 1.10 m from 50.85 m to 51.95 m 0.69% Nickel over 1.00 m from 43.00 m to 44.00 m 0.32 g/t Gold over 1.00 m from 114.00 m to 115.00 m 0.15 g/t Platinum over 0.57 m from 116.82 m to 116.82 m 0.41 g/t Palladium over 0.50 m from 137.94 m to 138.44 m 0.15 % Cobalt over 0.50 m from 64.50 m to 65.00 m High-grade individual commodity intersections within drill Hole W225-12 include: 1.80% Copper over 0.55 m from 105.61 m to 106.16 m 0.71% Nickel over 0.72 m from 99.33 m to 100.05 m 0.52 g/t Gold over 1.00 m from 56.00 m to 57.00 m 1.05 g/t Palladium over 1.00 m from 70.00 m to 71.00 m 0.55 g/t Platinum over 0.57 m from 102.91 m to 103.48 m 0.09 % Cobalt over 0.75 m from 102.16 m to 102.91 m Table 2: Drill Hole Collar Information Datum used in UTM NAD83 Z16N. DRILL OLE Easting Northing Elev (m) Azimuth Dip Length (m) W225-08 459,696 5,813,155 246 180 -55 146.00 W225-12 462,556 5,812,549 242 225 -55 159.00 [1] Data from historical drillhole were referred from a NI 43-101 report titled "NI 43-101 Updated Technical Report on the W2 Copper-Nickel-PGE Property" authored by I.A. Osmani et al., effective on September 4th, 2024. QAQC: Samples (NQ core diameter = 4.76 cm) were cut using a diamond blade saw, inserted into labeled bags, and delivered by representatives of PTX to Activation Laboratories Ltd. in Thunder Bay, Ontario. Activation Laboratories Ltd. is an ISO 17025:2005 accredited testing laboratory. Samples were analyzed for Au, Pt, and Pd using the lead fire-assay 1C-OES package, and multi-element analysis was completed by near-total digestion (four-acid) with an ICP-OES finish (1F2 package). For over-range samples (Cu, Ni) over 1% Cu or Nickel, the 8-4 Acid Near Total ICP-OES method was utilized. PTX inserted standards and blanks and performs duplicate analysis as part of its QA/QC program. Activation Laboratories also performs an internal QA/QC program which includes the insertion of CRM's, blanks, sample repeats, and duplicate samples. Qualified Person: The technical information presented in this news release has been reviewed and approved by Joerg Kleinboeck, P. Geo., a non-independent qualified person to PTX Metals who is responsible for ensuring that the related technical information provided in this news release is accurate and who act as a "qualified person" (QP) as defined by National Instrument 43-101, Standards of Disclosure for Mineral Projects. About PTX Metals Inc.: PTX is a mineral exploration company focused on high-quality strategic metals assets in northern Ontario, allowing exposure for shareholders to Copper, Gold, Nickel, and PGEs discovery. The Province of Ontario is renowned as a first-class mining jurisdiction for its abundance of mineral resources and safe jurisdiction. Our corporate objective is to advance our assets, and unveil the potential of two Flagship Projects, the W2 Cu-Ni-PGE located in the strategic Ring of Fire region, and the Shining Tree Gold Project neighbor to multi-million ounces gold deposits in the Timmins Gold Camp. PTX's portfolio of assets was strategically acquired for their geologically favorable attributes, and proximity to established mining companies. PTX is based in Toronto, Canada, with a primary listing on the TSX under the symbol PTX. The Company is also listed in Frankfurt under the symbol 9PF and on the OTCQB in the United States as PANXF. For additional information on PTX, please visit the Company's website at For further information, please contact: Greg Ferron, President and Chief Executive Officer Phone: +1 (416) 270-5042 Email: gferron@ Forward-Looking Information: This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information, including statements regarding the ability of the Company to satisfy the regulatory, stock exchange and commercial closing conditions of Private Placement, and the potential development of mineral resources and mineral reserves which may or may not occur. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, and general economic and political conditions. Forward looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including that all necessary approvals, including governmental and regulatory approvals, will be received as and when expected. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether because of new information, future events or otherwise, other than as required by applicable laws. For more information on the risks, uncertainties and assumptions that could cause our actual results to differ from current expectations, please refer to the Company's public filings available under the Company's profile at This news release does not constitute an offer to sell or a solicitation of an offer to buy nor shall there be any sale of any of the securities in any jurisdiction in which such offer, solicitation or sale would be unlawful, including any of the securities in the United States of America. The securities described herein have not been and will not be registered under the United States Securities Act of 1933, as amended (the "1933 Act") or any state securities laws and may not be offered or sold within the United States or to, or for account or benefit of, U.S. Persons (as defined in Regulation S under the 1933 Act) unless registered under the 1933 Act and applicable state securities laws, or an exemption from such registration requirements is available. Neither TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this release. To view the source version of this press release, please visit Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
3 days ago
- Yahoo
Neighbors, PBOT fed up with NW 13th outdoor plaza
PORTLAND, Ore. (KOIN) — Outdoor dining spots became quite popular during and since the COVID-19 pandemic. They popped up around the city and many restaurants continue using the extra, outdoor space. But neighbors who live near the Northwest 13th Avenue Plaza said things have gotten out of hand. 'It was a great idea. And certainly during pandemic, everybody was all for it. But it's now, it's really just become an extension of this restaurant,' said neighbor Steve Heard about the outdoor seating at River Pig. 'People don't know what to do. Then you've got this little narrow area here, like, the fire trucks can't get through here. And it's just been kind of a mess.' The Portland Bureau of Transportation, which regulates the outdoor seating areas, said the structures like the one at Northwest 13th Avenue were that officially began in 2023. Stone Soup Cafe offers 'workforce culinary training' However, some of the restaurants' permits expired in December 2024. PBOT gave them deadline extensions for several months but told them fines were possible. In May, began getting fined $500 weekly. On June 1, the PBOT $500 fines became daily. Ramzy Hattaar, who owns River Pig, told KOIN 6 News he's been trying to work with the city. The restaurant filed for another permit, he said. 'I think the biggest issue, and what people are misunderstanding is, you know, we're not opposed to a standardized solution,' Hattaar said. And, he said, he needs more time. 'We need to find a way to afford to make the changes and have it not collapse our businesses and still want people to come down to the Pearl District during the summer months,' he said. Though PBOT declined an on-camera interview, they did provide answers in an email. 'The three businesses have not complied with plaza requirements, despite a year and a half of notice and four deadline extensions,' spokesperson Dylan Rivera said. 'Portland Fire & Rescue raised concerns about the roofs of the large structures creating fire hazards, the blocking of a building fire escape and inability to access fire department water connections on the building facade.' PBOT said the three businesses are River Pig, Papi Chulo's and The Star. Because the businesses 'have not complied' with 'PBOT will be moving forward with the removal of these plaza blocks due to lack of compliance, declining public support at this location, and ongoing maintenance and operations issues.' Rivera also said these structures at the Northwest 13th Avenue Plaza are also too big. 'As we stated in a notice in April, if the businesses did not come into compliance by May 11, weekly fines would begin, and if they did not come into compliance by June 1, daily fines would begin,' Rivera said. River Pig's Hattaar said the soonest he can get a contractor he can afford to take down the outdoor seating will be June 9. Copyright 2025 Nexstar Media, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed.
