Latest news with #JaredHannah
CNET
21-05-2025
- CNET
I Run CNET's Testing Labs. Here's How Our Top-Rated Robot Vacuum Cleaned Up in Real Life
CNET's expert staff reviews and rates dozens of new products and services each month, building on more than a quarter century of expertise. My good boy Torben was more than excited to see if the Dreame X50 was up to the task of cleaning up after him. Jared Hannah/CNET I've tested a lot of robot vacuums over the years, and while they've gotten smarter and more powerful, there's always been one annoying limitation -- they can't handle multiple floors without human help. No matter how advanced the tech gets, I still end up carrying the vacuum up and down the stairs. That's why I was curious about the Dreame X50 Ultra. It's a vacuum and mop combo that made its debut at CES 2025. It promises to tackle multi-level cleaning smarter. After trying it out in my messy, pet-filled home, I was genuinely surprised by what it could do. We tested it at CNET Labs along with dozens of other robot vacuums. After lab testing, it was named CNET's best for obstacles and pets. I was impressed by how the DreamX50 performed during lab testing. I wanted to see how the Dream X50 performed in real-world conditions -- how well could it tackle pet hair, climb over my stuff, mop and navigate random obstacles? I spent years as a product development design engineer and now oversee operations at CNET's Testing Lab. Now layer my expertise with my home life: I live with my wife, three teenage boys and two large shedding dogs. What better place to put the Dreame X50 to the ultimate real-world test? Here's what I found: it did well, what surprised me and what fell short. My first impressions of the Dreame X50 Ultra robot vacuum Easy set up: Setting it up was pretty easy-peasy. I followed the guide, filled the water, added the cleaner and plopped in the dust bag. The app was a breeze on my Android phone, and I got it mapping the house in no time. Mapping and navigation: It zipped around and mapped my main floor (about 1,200 square feet) in just 11 minutes. It figured out the different rooms and even knew where the carpets were and the flooring types of each room. This is the live view mode in the app so that you can see what the robot sees in real time from its front facing camera. It's a neat way to check on your house when you're not home. Jared Hannah Cleaning: It started with a full deep clean, then vacuumed and mopped on its second run. During the app set up, I told it I had pets, so it emptied its dustbin a bunch during the first run. I found it to be pretty smart about lifting its mops while vacuuming the carpet. Timing: It took a little over 2 hours to do everything, which is slower than my older Roborock Q5 robot vac, but hey, this one mops! For comparison, my Roborock Q5 will vacuum the whole house in 88 minutes, whereas the Dreame took 123 minutes to vacuum the same space. 5 things I liked and what surprised me 1. Tangle-free roller: After a few runs, there was zero hair wrapped around the roller. To me, this alone is a huge win and solves a big pain point for my home. I call it the "Great Pyrenees challenge." I have two long-haired, large-breed shedding dogs (Great Pyrenees), so untangling hair from the roller is a constant annoyance. Not having to untangle it all the time is a win in my book. A closer look at the Dreame X50 brush roller. It can be removed easily if you ever need to clear anything that might get caught between the dual rollers. Jared Hannah A comparison of the older Roborock Q5 (top) vs. the Dreame X50 Ultra (bottom) after cleaning one large area rug covered in dog hair. You can see that the Roborock already has lots of hair stuck on the roller and the Dreame has none. Jared Hannah 2. Climbing: It conquered what I call my "Ikea chair challenge." My other robo-vacs always get stuck at the bottom of this chair. The Dreame X50 figured out how to use its auxiliary climbing arms to get over it. It's actually kind of entertaining to watch the robot struggle a little at first, then regroup and try a different strategy using one of the tools it has in its arsenal. The Dreame X50 Ultra was able to use its lift arms to climb over the base of this chair that almost every other robot gets stuck on. Jared Hannah The robot successfully identified furniture that it might get stuck on. It knew to either avoid it, or use its lift arms to climb over it. Jared Hannah The Dreame X50 also did a great job at identifying cords and it knew to avoid them. Jared Hannah 3. Navigating furniture: I was surprised by how well it could handle furniture. The X50 has a feature that lowers its turret, allowing it to fit underneath low-clearance furniture that other robots could not reach. These are some of the settings in the extensive menu where you can set it to lower the turret to fit under low clearance furniture. Jared Hannah 4. Mopping: I've never had a mopping robot before, but this one does a solid job. It's pretty much as good as when I mop myself. I was impressed with how well the base station cleaned off the mop pads between cycles. I just have to dump the dirty water tank and refill the clean one. The clean water tank and dirty water tank are easy to remove and install. These tanks are also much larger capacity than other models we have tested allowing you to get through more mopping cycles before it needs a refill. Jared Hannah The Dreame X50 is mopping up muddy paw prints from vinyl plank flooring. It knows to avoid the area rug when it is performing the mopping function. Jared Hannah There's also a spot for cleaning solution, which is neat. When it parks itself on the base station, it sprays off the mop pads while spinning them to get all of the dirt out. Then it dries them out. I inspected the mop pads after their pad cleaning cycle, and they look very clean. By default, it'll do this after every mopping session so that you're never using dirty mop pads or dirty water on your floors. I did notice a little dirt buildup in the base station where it cleans the mop pads, so that will eventually need cleaning. 5. Object avoidance: This was seriously impressive. It dodged shoes, socks, cords, toys, everything. I didn't have to tidy up before running it, which is amazing. It even recognized my dogs and was super gentle around them. The Dreame X50 will take photos of your pets if you enable that setting. You can click on the pet icon on the cleaning map to see the photos after a cleaning cycle. Jared Hannah 6 things I didn't like or I'm still unsure about 1. Vacuum performance: I'm not 100% convinced it's the best vacuum for getting all the dog hair off my rugs. Based on my home experience, it appeared to do an OK job. During lab testing, though, we found the Ecovacs Deebot T30S and the iRobot Roomba Combo J7 Plus to perform better with our pet hair and carpet test. The Dreame X50 performed admirably during the hardwood-sand test, but compared with its competitors, it struggled on carpet, averaging under 50% in our testing on midpile and low-pile carpet. 2. Lots of moving parts: The DreameX50 has a ton of gadgets and moving parts. I'm curious how well it will hold up long term, but so far, so good. 3. Software quirks: The AI is supposed to be super smart, but it had some weird moments. It took its time figuring out where it was at the start of a cleaning cycle, and it got a little confused by my dining chairs. It also took way longer to clean the house than my old robot vac. 4. Voice command wonkiness: The voice commands were a bit hit or miss, too. I didn't always know what the robot would do when given a particular voice command. For example, when I said "mop the kitchen," the robot vacuumed the kitchen before mopping, even though the default setting was supposed to do both simultaneously. Similarly, when I said "clean the house," the robot cleaned only the hallway. I found that "start cleaning" would initiate a full house clean, but other commands didn't always produce the expected results. While most voice commands worked, there is still room for improvement. 5. Settings menu: The settings menu is super packed, which I found overwhelming. Feature bloat tends to be a common problem on robot vacuum apps. We've also seen this on the Roborock app while testing the Saros Z70. 6. Price: The Dreame X50 is one of the most expensive vacuums out there right now, at around $1,699 at full price. It might be worth it if you have numerous levels and thresholds in your home and really want a robotic vacuum, but I can't see it emptying shelves until Dreame can figure out how to bring the costs down. My overall experience with the Dreame X50 robot vacuum The Dreame X50 Ultra mapped out the main level of my house quickly and got right to work cleaning. Jared Hannah This robot vacuum reminds me of one of my favorite movies from the 1980s -- Batteries Not Included. If you haven't seen the movie (I highly recommend it), the Dreame X50 Ultra has a lot of similarities to those robots with all of its tools and moving parts like the lifting arms, the extendable side brush, the headlight and the lidar system. Overall, I'm pretty happy with this robot. It vacuums well, the mop feature is great, and the object avoidance is a lifesaver. It's a bit quirky and could use some software tweaks, but I honestly love all its little robot arms and how it tackles obstacles. It kind of feels like another personality running around the house.
CNET
21-05-2025
- CNET
I Tried a CNET-Approved Robot Vacuum, and It Seriously Cleaned Up My Life
CNET's expert staff reviews and rates dozens of new products and services each month, building on more than a quarter century of expertise. My good boy Torben was more than excited to see if the Dreame X50 was up to the task of cleaning up after him. Jared Hannah/CNET I've tested a lot of robot vacuums over the years, and while they've gotten smarter and more powerful, there's always been one annoying limitation -- they can't handle multiple floors without human help. No matter how advanced the tech gets, I still end up carrying the vacuum up and down the stairs. That's why I was curious about the Dreame X50 Ultra. It's a vacuum and mop combo that made its debut at CES 2025. It promises to tackle multi-level cleaning smarter. After trying it out in my messy, pet-filled home, I was genuinely surprised by what it could do. We tested it at CNET Labs along with dozens of other robot vacuums. After lab testing, it was named CNET's best for obstacles and pets. I was impressed by how the DreamX50 performed during lab testing. I wanted to see how the Dream X50 performed in real-world conditions -- how well could it tackle pet hair, climb over my stuff, mop and navigate random obstacles? I spent years as a product development design engineer and now oversee operations at CNET's Testing Lab. Now layer my expertise with my home life: I live with my wife, three teenage boys and two large shedding dogs. What better place to put the Dreame X50 to the ultimate real-world test? Here's what I found: it did well, what surprised me and what fell short. My first impressions of the Dreame X50 Ultra robot vacuum Easy set up: Setting it up was pretty easy-peasy. I followed the guide, filled the water, added the cleaner and plopped in the dust bag. The app was a breeze on my Android phone, and I got it mapping the house in no time. Mapping and navigation: It zipped around and mapped my main floor (about 1,200 square feet) in just 11 minutes. It figured out the different rooms and even knew where the carpets were and the flooring types of each room. This is the live view mode in the app so that you can see what the robot sees in real time from its front facing camera. It's a neat way to check on your house when you're not home. Jared Hannah Cleaning: It started with a full deep clean, then vacuumed and mopped on its second run. During the app set up, I told it I had pets, so it emptied its dustbin a bunch during the first run. I found it to be pretty smart about lifting its mops while vacuuming the carpet. Timing: It took a little over 2 hours to do everything, which is slower than my older Roborock Q5 robot vac, but hey, this one mops! For comparison, my Roborock Q5 will vacuum the whole house in 88 minutes, whereas the Dreame took 123 minutes to vacuum the same space. 5 things I liked and what surprised me 1. Tangle-free roller: After a few runs, there was zero hair wrapped around the roller. To me, this alone is a huge win and solves a big pain point for my home. I call it the "Great Pyrenees challenge." I have two long-haired, large-breed shedding dogs (Great Pyrenees), so untangling hair from the roller is a constant annoyance. Not having to untangle it all the time is a win in my book. A closer look at the Dreame X50 brush roller. It can be removed easily if you ever need to clear anything that might get caught between the dual rollers. Jared Hannah A comparison of the older Roborock Q5 (top) vs. the Dreame X50 Ultra (bottom) after cleaning one large area rug covered in dog hair. You can see that the Roborock already has lots of hair stuck on the roller and the Dreame has none. Jared Hannah 2. Climbing: It conquered what I call my "Ikea chair challenge." My other robo-vacs always get stuck at the bottom of this chair. The Dreame X50 figured out how to use its auxiliary climbing arms to get over it. It's actually kind of entertaining to watch the robot struggle a little at first, then regroup and try a different strategy using one of the tools it has in its arsenal. The Dreame X50 Ultra was able to use its lift arms to climb over the base of this chair that almost every other robot gets stuck on. Jared Hannah The robot successfully identified furniture that it might get stuck on. It knew to either avoid it, or use its lift arms to climb over it. Jared Hannah The Dreame X50 also did a great job at identifying cords and it knew to avoid them. Jared Hannah 3. Navigating furniture: I was surprised by how well it could handle furniture. The X50 has a feature that lowers its turret, allowing it to fit underneath low-clearance furniture that other robots could not reach. These are some of the settings in the extensive menu where you can set it to lower the turret to fit under low clearance furniture. Jared Hannah 4. Mopping: I've never had a mopping robot before, but this one does a solid job. It's pretty much as good as when I mop myself. I was impressed with how well the base station cleaned off the mop pads between cycles. I just have to dump the dirty water tank and refill the clean one. The clean water tank and dirty water tank are easy to remove and install. These tanks are also much larger capacity than other models we have tested allowing you to get through more mopping cycles before it needs a refill. Jared Hannah The Dreame X50 is mopping up muddy paw prints from vinyl plank flooring. It knows to avoid the area rug when it is performing the mopping function. Jared Hannah There's also a spot for cleaning solution, which is neat. When it parks itself on the base station, it sprays off the mop pads while spinning them to get all of the dirt out. Then it dries them out. I inspected the mop pads after their pad cleaning cycle, and they look very clean. By default, it'll do this after every mopping session so that you're never using dirty mop pads or dirty water on your floors. I did notice a little dirt buildup in the base station where it cleans the mop pads, so that will eventually need cleaning. 5. Object avoidance: This was seriously impressive. It dodged shoes, socks, cords, toys, everything. I didn't have to tidy up before running it, which is amazing. It even recognized my dogs and was super gentle around them. The Dreame X50 will take photos of your pets if you enable that setting. You can click on the pet icon on the cleaning map to see the photos after a cleaning cycle. Jared Hannah 6 things I didn't like or I'm still unsure about 1. Vacuum performance: I'm not 100% convinced it's the best vacuum for getting all the dog hair off my rugs. Based on my home experience, it appeared to do an OK job. During lab testing, though, we found the Ecovacs Deebot T30S and the iRobot Roomba Combo J7 Plus to perform better with our pet hair and carpet test. The Dreame X50 performed admirably during the hardwood-sand test, but compared with its competitors, it struggled on carpet, averaging under 50% in our testing on midpile and low-pile carpet. 2. Lots of moving parts: The DreameX50 has a ton of gadgets and moving parts. I'm curious how well it will hold up long term, but so far, so good. 3. Software quirks: The AI is supposed to be super smart, but it had some weird moments. It took its time figuring out where it was at the start of a cleaning cycle, and it got a little confused by my dining chairs. It also took way longer to clean the house than my old robot vac. 4. Voice command wonkiness: The voice commands were a bit hit or miss, too. I didn't always know what the robot would do when given a particular voice command. For example, when I said "mop the kitchen," the robot vacuumed the kitchen before mopping, even though the default setting was supposed to do both simultaneously. Similarly, when I said "clean the house," the robot cleaned only the hallway. I found that "start cleaning" would initiate a full house clean, but other commands didn't always produce the expected results. While most voice commands worked, there is still room for improvement. 5. Settings menu: The settings menu is super packed, which I found overwhelming. Feature bloat tends to be a common problem on robot vacuum apps. We've also seen this on the Roborock app while testing the Saros Z70. 6. Price: The Dreame X50 is one of the most expensive vacuums out there right now, at around $1,699 at full price. It might be worth it if you have numerous levels and thresholds in your home and really want a robotic vacuum, but I can't see it emptying shelves until Dreame can figure out how to bring the costs down. My overall experience with the Dreame X50 robot vacuum The Dreame X50 Ultra mapped out the main level of my house quickly and got right to work cleaning. Jared Hannah This robot vacuum reminds me of one of my favorite movies from the 1980s -- Batteries Not Included. If you haven't seen the movie (I highly recommend it), the Dreame X50 Ultra has a lot of similarities to those robots with all of its tools and moving parts like the lifting arms, the extendable side brush, the headlight and the lidar system. Overall, I'm pretty happy with this robot. It vacuums well, the mop feature is great, and the object avoidance is a lifesaver. It's a bit quirky and could use some software tweaks, but I honestly love all its little robot arms and how it tackles obstacles. It kind of feels like another personality running around the house.
CNET
20-05-2025
- CNET
I Dreamed of a Robot That Sorted My Socks, But This $2,600 Vacuum Isn't It (Yet)
The Saros Z70 is priced at $2,599, making it one of the most expensive robot vacuums I've seen. You can buy two robot vacuums for this price. The most notable feature is the OmniGrip mechanical arm designed to pick up and sort items. It also has strong vacuuming and mopping capabilities, excellent mapping, and the ability to cross thresholds. The mechanical arm has several issues, including difficulties picking up objects, navigation problems, and software bugs. There were also connectivity issues during setup. Cleaning my hardwood and carpet. Ajay Kumar Pros Good vacuuming on hardwood Brush roller does not get tangled with dog hair Very low profile and fits under pretty much everything Quiet operation Works well with pets Chassis lift prevents it from getting stuck most of the time Cons Dust bin is too small Water tank is too small Mopping performance isn't great Obstacle avoidance needs some improvement Roborock I wanted to love the Roborock Saros Z70. Never before have we seen a robot vacuum with a mechanical arm meant to pick up objects and help you clean before it vacuums and mops. As someone who has three cats, I found this incredibly appealing. I test and write about vacuums for a living. When we first saw the Roborock Saros Z70 at CES earlier this year, we all knew we were witnessing something special. CNET even chose it as one of our best of CES awards. I spent several hours with it in New York City during a demo, giving me fairly high hopes for its time and labor-saving potential. I tested it at my cluttered apartment for the better part of a month and so did my colleague and lead lab tester, Jared Hannah at his home. The reality is, the Saros Z70 certainly has a lot of promise. It vacuums and mops like a champ, can cross thresholds and obstacles as effectively as the Dreame X50 Ultra, and has great mapping and pet recognition in my home. The OmniGrip arm picking up my wife's sock. Ajay Kumar However, when it comes to its signature feature -- the robot arm -- we found it's still not ready for showtime. Right now, the Saros Z70 is fairly limited in its ability to pick up very small objects like pet toys and kid's toys. On occasion, it did recognize and attempt to pick up cat toys it found scattered around my home, but it was never able to succeed at that. Often, it would deploy the arm, then detect my cat or some other object nearby and freeze, blaring 'Error 69,' forcing me to manually reset the arm. At one point, it even tried to pick up my standing desk mat before realizing it wasn't a compatible object and giving up. Roborock tells us they are aware of the issues and are actively working on software fixes that will roll out in June and July. Here are my impressions after a month of testing and whether it's worth its $2,600 price tag. Roborock My experience with Saros Z70 We tested the Saros Z70 at CES 2025, at a live demo, at our New York City Office space, at CNET's testing lab in Louisville KY and most recently at my home. My biggest takeaway from my real-world home test versus my other experiences with this robot vacuum is the various issues with the mechanical arm, its struggle to pick up objects, navigation problems, and software bugs. It cleaned great as a regular robot vacuum and mop, but I couldn't rely on the arm's sorting capabilities. 'Yeah, it seems like it's basically a beta version of the arm,' said Hannah, who was testing the Z70 at the same time as me. 'They should do a bit more development before it's ready for the masses. I would get the error if the arm bumped something while moving an object. It sensed that there was too much resistance, so I think it was doing what it was supposed to, but it seems like that would end up being a common occurrence.' The Saros Z70 got scratched up after trying to clean under the desk chair. Ajay Kumar Vacuuming and mopping: Strong performance, good sand/litter/hair pickup; mopping with clean/dirty tanks and hot air drying is effective. Strong performance, good sand/litter/hair pickup; mopping with clean/dirty tanks and hot air drying is effective. Special features: The OmniGrip arm is the standout special feature, though currently unreliable. I found operational issues during my home testing. It struggled to pick up certain objects, especially pet toys, but I had much better luck with socks. Not only was the Saros Z70 able to identify my wife's purple socks and pick them up off the hardwood floor in the bedroom, but it also began to transport them to my designated shoe-drop-off area that's set up in the foyer. The problem was that partway on this journey, it gave up somewhere between the hallway and the kitchen, dropping the sock, acting like the job was complete, and continuing its regular cleaning cycle. The OmniGrip arm is the standout special feature, though currently unreliable. I found operational issues during my home testing. It struggled to pick up certain objects, especially pet toys, but I had much better luck with socks. Not only was the Saros Z70 able to identify my wife's purple socks and pick them up off the hardwood floor in the bedroom, but it also began to transport them to my designated shoe-drop-off area that's set up in the foyer. The problem was that partway on this journey, it gave up somewhere between the hallway and the kitchen, dropping the sock, acting like the job was complete, and continuing its regular cleaning cycle. Mapping and navigation: It generated a 2D and 3D map of my space, automatically tagging the rooms (bedroom, bathroom, living room and kitchen), flooring type (hard surface and carpet) and identifying certain pieces of furniture like my couch, TV stand and bed. It also marked notable thresholds in my space where extra effort would be required to cross. You can remap it or tell it to remap a specific room if you're not happy with the result, but it did a great job for me the first time around. It generated a 2D and 3D map of my space, automatically tagging the rooms (bedroom, bathroom, living room and kitchen), flooring type (hard surface and carpet) and identifying certain pieces of furniture like my couch, TV stand and bed. It also marked notable thresholds in my space where extra effort would be required to cross. You can remap it or tell it to remap a specific room if you're not happy with the result, but it did a great job for me the first time around. Software and app: The app isn't the most straightforward tool to use, with a profusion of settings and nested menus that allow you to adjust just about everything the robot can do, from the dustbin emptying and mop washing frequency, to cleaning patterns, obstacle photos, enabling the robotic arm and more. Just about everything the robot can do is customizable, but I wish all these features and settings were a bit more front and center rather than tucked away in the lengthy settings menu. The app isn't the most straightforward tool to use, with a profusion of settings and nested menus that allow you to adjust just about everything the robot can do, from the dustbin emptying and mop washing frequency, to cleaning patterns, obstacle photos, enabling the robotic arm and more. Just about everything the robot can do is customizable, but I wish all these features and settings were a bit more front and center rather than tucked away in the lengthy settings menu. Design and aesthetics: Low-profile design, good for fitting under furniture, but can lead to scratches. Low-profile design, good for fitting under furniture, but can lead to scratches. Ease of use: Setup had connectivity issues; once set up, basic functions are easy, but advanced settings are complex. Roborock The specs Price: $2,599 $2,599 Object weight limit (OmniGrip Arm): 300 grams rated load; approximately 700 grams actual load capacity during our testing. 300 grams rated load; approximately 700 grams actual load capacity during our testing. Threshold crossing height: Capable of crossing thresholds up to approximately two inches. Capable of crossing thresholds up to approximately two inches. Cleaning time: (Ajay's apartment, 850 sq ft): 1.5 to 2 hours for a full vacuum and mop session. (Ajay's apartment, 850 sq ft): 1.5 to 2 hours for a full vacuum and mop session. Cleaning time: (Jared's house, 1,200 square feet) : 2.5 to 3 hours for a full vacuum and mop session on the main level. (Jared's house, 1,200 square feet) 2.5 to 3 hours for a full vacuum and mop session on the main level. Mapping time (Ajay's apartment, 850 sq ft): 16 to 18 minutes for initial mapping. (Ajay's apartment, 850 sq ft): 16 to 18 minutes for initial mapping. Sand pickup performance on hardwood: 82.46%, this is excellent hardwood performance, falling just shy of our best overall, the Ecovacs Deeboth T30S Combo (85%). 82.46%, this is excellent hardwood performance, falling just shy of our best overall, the Ecovacs Deeboth T30S Combo (85%). Sand pickup performance on carpet (Midpile): 51.77%, this surpasses the Dreame X50 Ultra (44% mid-pile) 51.77%, this surpasses the Dreame X50 Ultra (44% mid-pile) Sand pickup performance on carpet (Low-Pile): 51.06%, which comes close to matching the Shark Power Detect NeverTouch Pro (54.5%). 51.06%, which comes close to matching the Shark Power Detect NeverTouch Pro (54.5%). Voice command compatibility: The app can be connected to Amazon Alexa for voice commands. The app can be connected to Amazon Alexa for voice commands. Customizable: The app allows for a wide range of customization, including dustbin emptying frequency, mop washing frequency, cleaning patterns, obstacle photos, and enabling/disabling the robotic arm. The app allows for a wide range of customization, including dustbin emptying frequency, mop washing frequency, cleaning patterns, obstacle photos, and enabling/disabling the robotic arm. Mapping features: The app displays the 2D and 3D maps generated by the robot, allows for room tagging, furniture identification, and setting "no-go" zones. It also identifies pet areas and allows for "Pet Area Cleaning." The app displays the 2D and 3D maps generated by the robot, allows for room tagging, furniture identification, and setting "no-go" zones. It also identifies pet areas and allows for "Pet Area Cleaning." Wi-Fi connectivity: The robot needs to connect to Wi-Fi for setup and app control. The robot needs to connect to Wi-Fi for setup and app control. Dual spinning mopping pads: The robot uses a pair of dual spinning mopping pads that attach and detach from the docking station. The robot uses a pair of dual spinning mopping pads that attach and detach from the docking station. Clean and dirty water system: Uses clean water for mopping and collects dirty water in a separate tank, ensuring cleaner mopping. Uses clean water for mopping and collects dirty water in a separate tank, ensuring cleaner mopping. Mopping pad cleaning and drying: Mopping pads are washed and hot-air dried at the base station between cleaning sessions. Mopping pads are washed and hot-air dried at the base station between cleaning sessions. Mopping modes: The "Vacuum+Mop" mode vacuums first and then mops the entire space. There are options for Deep cleaning, Pet Area and an AI-powered SmartPlan. Saros Z70 docked Ajay Kumar CNET's buying advice For the time being, I am holding off on scoring, rating or recommending the Saros Z70. While it excels at vacuuming, mopping, and navigation, the core feature – the OmniGrip arm – is not yet reliable enough for me to fully give an opinion on this product as a whole. Roborock told CNET it plans to roll out software updates in June and July that are expected to positively change my experience. Some of the anticipated improvements include improved grab point optimization, smarter sorting optimization, and new pickup categories like sports shoes. It is hard to ignore the $2,599 price tag. I argue that for the price, you could purchase two or three excellent standard robot vacuums and mops, like the Yeedi M12 Pro+, or a comparable high-performing model such as the Dreame X50 Ultra -- both on CNET's best robot vacuums best list. If all you care about is strong vacuuming, mopping and obstacle avoidance: The Ecovacs Deebot T30S Combo is currently CNET's "best overall robot vacuum. Roborock Without a fully operational and reliable OmniGrip arm, I can't justify its value for the cost at this time. 'The arm is a neat feature to watch, but I personally don't find it very useful,' said Hannah. ' I feel like if the robot is smart enough to avoid obstacles such as shoes and socks, I don't need it to try and pick them up and move them. As long as the robot doesn't get stuck on anything during its cleaning cycle, that's good enough for me.' If the OmniGrip arm is your primary reason for considering the Saros Z70, I recommend you wait for future software updates or consider alternatives until that feature is more refined.
