Latest news with #MistyUrbatsch
Yahoo
2 days ago
- Business
- Yahoo
Core Nickel Announces Assay Results from Winter Drill Program at Halfway Lake and Provides Update on the Mel Deposit
Highlights: Three drillholes along conductive trend HL-04 have returned nickel-bearing sulphide mineralization with grades up to 0.8% Ni over 0.7 m. Nickel mineralization is intersected within massive sulphides indicating the system is capable of concentrating nickel in massive sulphide lenses. Ultramafic-hosted nickel-bearing sulphide mineralization up to 0.65% Ni over 1.1 m indicates a fertile nickel source along conductive trend HL-04. Core Nickel has completed a detailed data validation and 3D geological model of the Mel deposit and received recommendations from Understood Mineral Resources Ltd. to support a modern NI 43-101 resource estimate, including twinning, resampling historical core, and collecting density measurements. Saskatoon, Saskatchewan--(Newsfile Corp. - June 12, 2025) - Core Nickel Corp. (TSXV: CNCO) ("Core Nickel" or the "Company") is pleased to report nickel-bearing massive sulphide lenses and ultramafic source rocks along conductive trend HL-04 from its winter 2025 Drill Program (the "Program") at the 100%-owned Halfway Lake Project (the "Project"), located in the Thompson Nickel Belt, Manitoba. The Program comprised a total of 3,585.5 metres ("m") in 12 diamond drillholes as outlined in Table 1 and illustrated in Figure 1 as previously announced on April 28, 2025. The Project is strategically located within kilometres of advanced infrastructure such as the Bucko Mill, heavy rail and highways, and access to high-capacity, nearly 100% clean, hydro-electric power. Misty Urbatsch, Chief Executive Officer, President, and Director of Core Nickel, commented, "Intersecting anomalous nickel mineralization in all three drillholes along the HL-04 trend is an exciting step forward for Core Nickel. The presence of nickel-bearing massive sulphides confirms the system's ability to concentrate nickel, while ultramafic-hosted sulphide mineralization highlights the fertility of this emerging system. At the same time, we're making real strides toward bringing the Mel deposit into a modern resource by systematically resampling historical drill core, digitizing and verifying historical data, and building a modern 3D geological model of the deposit. The next step is getting on the ground and executing the program recommended by Understood Mineral Resources Ltd. to deliver a NI 43-101 compliant resource for Mel." Figure 1. Halfway Lake Winter 2025 Drillhole and Conductive Trend Location Map To view an enhanced version of this graphic, please visit: Table 1. Winter 2025 Diamond Drillhole Parameters To view an enhanced version of this graphic, please visit: Conductive Trend HL-04 Recent drilling along conductive trend HL-04 (Figure 2) has confirmed nickel-bearing massive sulphide mineralization hosted within granitic pegmatite and nickel-bearing ultramafic source rocks as outlined in Table 2. Drillhole HFW-25-007 targeted a strong electromagnetic (EM) response along the HL-04 conductive trend, located on the edge of a magnetic anomaly. A massive sulphide breccia at 44.3 m returned 0.17% Ni over 30 cm indicating anomalous nickel enrichment. Massive sulphides from 72.8 to 73.5 m returned 0.80% Ni over 70 cm confirming nickel mineralization within the massive sulphide lens (Figure 3). Drillhole HFW-25-010 targeted ~35 m in front of HFW-25-007 and is interpreted to have intersected the lower portion of the pyrrhotite-rich sulphide zone encountered in HFW-25-007. Drillhole HFW-25-010 intersected 0.17% Ni over 1.0 m in semi-massive sulphides at 39.2 m indicating anomalous nickel enrichment. Drillhole HFW-25-015, located 50 m along strike to the southwest of HFW-25-007, intersected 0.26% Ni over 7.7 m, including 0.65% Ni over 1.1 m within sulphide-bearing ultramafic rocks from the base of the overburden at 37.4 m to 45.1 m. This confirms the presence of nickel-enriched ultramafic source rocks along conductive trend HL-04. Semi-massive and massive sulphides hosted within granitic pegmatite from 72.2 to 84.1 m returned 0.12% Ni over 11.9 m, including 0.48% Ni over 0.5 m at 75.3 m, and 0.45% Ni over 1.0 m at 77.9 m confirming nickel mineralization with the sulphide lenses. Collectively, these holes demonstrate an enriched nickel-sulphide system that is capable of concentrating nickel in massive sulphide lenses. Table 2. Drillhole Assay Summary Hole ID Lithology From (m) To (m) Interval (m)* Ni % Cu % Co % HFW-24-007Massive Sulphides 44.3 44.6 0.3 0.17 0.05 0.01Massive Sulphides with Pegmatite 72.8 82.6 9.8 0.15 0.03 0.0 Includes Massive Sulphides 72.8 73.5 0.7 0.80 0.15 0.02 Includes Massive Sulphides 76.1 76.4 0.4 0.47 0.06 0.01 HFW-25-010Semi-massive Sulphides 39.2 40.2 1.0 0.17 0.07 0.01 HFW-25-015Ultramafic with Pegmatite 37.4 45.1 7.7 0.26 0.01 0.01 Includes Ultramafic 43.0 44.1 1.1 0.65 0.06 0.02Sulphidic Metasediment 53.5 54.6 1.1 0.12 0.03 0.01Massive Sulphide with Pegmatite 72.2 84.1 11.9 0.12 0.03 0.0 Includes Massive Sulphide with Pegmatite 75.3 75.8 0.5 0.48 0.08 0.01 Includes Massive Sulphide with Pegmatite 77.9 78.9 1 0.45 0.10 0.01 * Interval is not true thickness. Insufficient data currently to determine true thickness. Assay results have only been reported for nickel values >0.1% Ni in metasedimentary rocks and >0.3% Ni in ultramafic rocks. Figure 2. Halfway Lake - Conductive Trend HL-04 Drillhole Location MapTo view an enhanced version of this graphic, please visit: Figure 3. Top: Massive sulphides in HFW-25-007 returned 0.80% Ni over 70 cm from 72.8 to 73.5 mBottom: Close-up of massive sulphides at 73.3 m in HFW-25-007. To view an enhanced version of this graphic, please visit: Geochemical Sampling Procedures All drill core samples were shipped to Saskatchewan Research Council Geoanalytical Laboratories (SRC) in Saskatoon, Saskatchewan in secure containment for preparation, processing, and ICP-OES analysis for major and minor elements and ICP-MS analysis for trace elements using total 4-acid digestion (HF:HNO3:HCl:HClO4). Any samples returning greater than 5,000 ppm Ni, Cu, or Co were then analyzed using a base metal assay (ICP3 Assay) for Ni, Cu, and Co, where an aliquot of sample pulp is digested in HCl:HNO3 and the digested volume is then made up with deionized water for analysis by inductively coupled plasma optical emission spectroscopy (ICP-OES). The detection limit for Ni, Cu, and Co using this method is 0.001 wt%. Assay samples comprise 0.1 - 4.4 metre, generally 1.0 metre, continuous ½ NQ core samples or ¼ NQ core for duplicates over the sulfide mineralized intervals. The SRC is an ISO/IEC 17025/2005 and Standards Council of Canada certified analytical laboratory. Blanks, standard reference materials, and duplicates are inserted into the sample stream at regular intervals by Core Nickel and the SRC in accordance with Core Nickel's quality assurance/quality control (QA/QC) procedures. Geochemical assay data are subject to verification procedures by qualified persons employed by Core Nickel prior to disclosure. All reported depths and intervals are drillhole depths and intervals, unless otherwise noted, and do not represent true thicknesses, which have yet to be determined. Mel Deposit Update To support the development of a modern NI 43-101 compliant mineral resource estimate for the Mel deposit, Understood Mineral Resources Ltd. has recommended that Core Nickel twin five spatially representative historical drill holes, resample five to ten holes from different historical programs-where core is accessible-that span a range of nickel grades and are spatially distributed across the deposit, and collect representative density measurements. Core Nickel has been diligently working to compile, verify, and clean up the historical dataset to support construction of a modern 3D geological model. These efforts aim to validate and strengthen the existing data and underpin the development of a robust and modern geological interpretation for the project. About Core Nickel Core Nickel Corp. is a junior nickel exploration company that controls 100% of five projects in the Thompson Nickel Belt (TNB), a prolific nickel district located in Northern Manitoba, Canada (Figure 7). The five projects consist of approximately 27,000 hectares of land that is proximal to existing infrastructure, including highways, railways, major hydroelectric transmission lines, and operating mills. Core Nickel has a large contiguous land package in the northern part of the TNB, situated approximately 15-20 km from the City of Thompson. Core Nickel's northern TNB land package consists of three projects: Mel, Hunter, and Odei River. The Mel project encompasses the Mel deposit, which is characterized by a historical mineral resource consisting of an indicated resource of 4,279,000 tons grading 0.875% Ni, plus an inferred resource of 1,010,000 tons grading 0.839% Ni, at a cut-off of 0.5% Ni1. The target stratigraphy (Pipe Formation) that hosts the Mel deposit, and other deposits in the Thompson Nickel Belt, extend onto the Hunter and Odei River projects and drillhole intersections into the target stratigraphy on the Hunter project have successfully intersected anomalous nickel. The Company also holds two projects in the central TNB near the community of Wabowden: Halfway Lake and Resting Lake. Both projects host the target Pipe Formation associated with known elevated nickel mineralization and are proximal to existing nickel deposits, mills, and other infrastructure. Figure 4. Core Nickel Project Location Map To view an enhanced version of this graphic, please visit: The Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects for this news release is Caitlin Glew, P. Geo., Vice-President Exploration for Core Nickel Corp., who has reviewed and approved its contents. References 1 "Technical Report on the Mel Deposit, Northern Manitoba" prepared for Victory Nickel Inc, Shane Naccashian (P. Geo.) of Wardrop Engineering Inc., March 9, 2007 Mel Historical Mineral Resource Core Nickel Corporation is treating the 2007 Mineral Resource Estimate (MRE) prepared for Victory Nickel Inc. by Shane Naccashian (P. Geo.) of Wardrop Engineering Inc. as a "historical mineral resource" under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the reader is cautioned not to treat it, or any part of it, as a current mineral resource. Core Nickel has not done sufficient work to classify the historical estimate as a current mineral resource. The historical MRE summarized above has been included simply to demonstrate the mineral potential of the Mel deposit and the Mel project. Core Nickel considers the 2007 MRE to be relevant to the further development of the project; however, is not treating the historical estimate as a current mineral resource. The historical MRE was calculated in accordance with NI 43-101 and CIM standards at the time of publication and predates the current CIM Definition Standards for Mineral Resources and Mineral Reserves (May, 2014) and CIM Estimation of Mineral Resources & Mineral Reserves Best Practices Guidelines (November, 2019). To upgrade or verify the 2007 historical estimate as current, Core Nickel will need to complete a thorough review of all the 2007 historical MRE information and drill data, along with the incorporation of subsequent exploration work and results, which includes some drilling around the edges of the historical MRE subsequent to the publication of the resource. Additionally, a full review of the economic parameters utilized to determine current Reasonable Prospectus for Eventual Economic Extraction (RPEEE) would be required in order to produce a current MRE for the Property. Any future mineral resource will need to evaluate the open pit and/or underground potential taking into consideration the current cost and pricing conditions or constraints, along with continuity of the resource blocks. Technical Disclosure The historical results contained within this news release have been captured from Manitoba Integrated Mining and Quarrying System ("iMaQs") as available and may be incomplete or subject to minor location inaccuracies. Management cautions that historical results were collected and reported by past operators and have not been verified nor confirmed by a Qualified Person but form a basis for ongoing work on the subject projects. On behalf of the Board of Directors"Misty Urbatsch"Misty UrbatschCEO, President and DirectorCore Nickel Corp. Contacts: Misty Urbatsch, CEO and President General Enquiry Tel: 306-668-6927 Tel: 306-668-6927 Email: murbatsch@ Email: info@ Also find us online: Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Forward-looking information All statements included in this press release that address activities, events or developments that the Company expects, believes or anticipates will or may occur in the future are forward-looking statements. These forward-looking statements involve numerous assumptions made by the Company based on its experience, perception of historical trends, current conditions, expected future developments and other factors it believes are appropriate in the circumstances. In addition, these statements involve substantial known and unknown risks and uncertainties that contribute to the possibility that the predictions, forecasts, projections and other forward-looking statements will prove inaccurate, certain of which are beyond the Company's control. Readers should not place undue reliance on forward-looking statements. Except as required by law, the Company does not intend to revise or update these forward-looking statements after the date hereof or revise them to reflect the occurrence of future unanticipated events. To view the source version of this press release, please visit
Yahoo
2 days ago
- Business
- Yahoo
Core Nickel Announces Assay Results from Winter Drill Program at Halfway Lake and Provides Update on the Mel Deposit
Highlights: Three drillholes along conductive trend HL-04 have returned nickel-bearing sulphide mineralization with grades up to 0.8% Ni over 0.7 m. Nickel mineralization is intersected within massive sulphides indicating the system is capable of concentrating nickel in massive sulphide lenses. Ultramafic-hosted nickel-bearing sulphide mineralization up to 0.65% Ni over 1.1 m indicates a fertile nickel source along conductive trend HL-04. Core Nickel has completed a detailed data validation and 3D geological model of the Mel deposit and received recommendations from Understood Mineral Resources Ltd. to support a modern NI 43-101 resource estimate, including twinning, resampling historical core, and collecting density measurements. Saskatoon, Saskatchewan--(Newsfile Corp. - June 12, 2025) - Core Nickel Corp. (TSXV: CNCO) ("Core Nickel" or the "Company") is pleased to report nickel-bearing massive sulphide lenses and ultramafic source rocks along conductive trend HL-04 from its winter 2025 Drill Program (the "Program") at the 100%-owned Halfway Lake Project (the "Project"), located in the Thompson Nickel Belt, Manitoba. The Program comprised a total of 3,585.5 metres ("m") in 12 diamond drillholes as outlined in Table 1 and illustrated in Figure 1 as previously announced on April 28, 2025. The Project is strategically located within kilometres of advanced infrastructure such as the Bucko Mill, heavy rail and highways, and access to high-capacity, nearly 100% clean, hydro-electric power. Misty Urbatsch, Chief Executive Officer, President, and Director of Core Nickel, commented, "Intersecting anomalous nickel mineralization in all three drillholes along the HL-04 trend is an exciting step forward for Core Nickel. The presence of nickel-bearing massive sulphides confirms the system's ability to concentrate nickel, while ultramafic-hosted sulphide mineralization highlights the fertility of this emerging system. At the same time, we're making real strides toward bringing the Mel deposit into a modern resource by systematically resampling historical drill core, digitizing and verifying historical data, and building a modern 3D geological model of the deposit. The next step is getting on the ground and executing the program recommended by Understood Mineral Resources Ltd. to deliver a NI 43-101 compliant resource for Mel." Figure 1. Halfway Lake Winter 2025 Drillhole and Conductive Trend Location Map To view an enhanced version of this graphic, please visit: Table 1. Winter 2025 Diamond Drillhole Parameters To view an enhanced version of this graphic, please visit: Conductive Trend HL-04 Recent drilling along conductive trend HL-04 (Figure 2) has confirmed nickel-bearing massive sulphide mineralization hosted within granitic pegmatite and nickel-bearing ultramafic source rocks as outlined in Table 2. Drillhole HFW-25-007 targeted a strong electromagnetic (EM) response along the HL-04 conductive trend, located on the edge of a magnetic anomaly. A massive sulphide breccia at 44.3 m returned 0.17% Ni over 30 cm indicating anomalous nickel enrichment. Massive sulphides from 72.8 to 73.5 m returned 0.80% Ni over 70 cm confirming nickel mineralization within the massive sulphide lens (Figure 3). Drillhole HFW-25-010 targeted ~35 m in front of HFW-25-007 and is interpreted to have intersected the lower portion of the pyrrhotite-rich sulphide zone encountered in HFW-25-007. Drillhole HFW-25-010 intersected 0.17% Ni over 1.0 m in semi-massive sulphides at 39.2 m indicating anomalous nickel enrichment. Drillhole HFW-25-015, located 50 m along strike to the southwest of HFW-25-007, intersected 0.26% Ni over 7.7 m, including 0.65% Ni over 1.1 m within sulphide-bearing ultramafic rocks from the base of the overburden at 37.4 m to 45.1 m. This confirms the presence of nickel-enriched ultramafic source rocks along conductive trend HL-04. Semi-massive and massive sulphides hosted within granitic pegmatite from 72.2 to 84.1 m returned 0.12% Ni over 11.9 m, including 0.48% Ni over 0.5 m at 75.3 m, and 0.45% Ni over 1.0 m at 77.9 m confirming nickel mineralization with the sulphide lenses. Collectively, these holes demonstrate an enriched nickel-sulphide system that is capable of concentrating nickel in massive sulphide lenses. Table 2. Drillhole Assay Summary Hole ID Lithology From (m) To (m) Interval (m)* Ni % Cu % Co % HFW-24-007Massive Sulphides 44.3 44.6 0.3 0.17 0.05 0.01Massive Sulphides with Pegmatite 72.8 82.6 9.8 0.15 0.03 0.0 Includes Massive Sulphides 72.8 73.5 0.7 0.80 0.15 0.02 Includes Massive Sulphides 76.1 76.4 0.4 0.47 0.06 0.01 HFW-25-010Semi-massive Sulphides 39.2 40.2 1.0 0.17 0.07 0.01 HFW-25-015Ultramafic with Pegmatite 37.4 45.1 7.7 0.26 0.01 0.01 Includes Ultramafic 43.0 44.1 1.1 0.65 0.06 0.02Sulphidic Metasediment 53.5 54.6 1.1 0.12 0.03 0.01Massive Sulphide with Pegmatite 72.2 84.1 11.9 0.12 0.03 0.0 Includes Massive Sulphide with Pegmatite 75.3 75.8 0.5 0.48 0.08 0.01 Includes Massive Sulphide with Pegmatite 77.9 78.9 1 0.45 0.10 0.01 * Interval is not true thickness. Insufficient data currently to determine true thickness. Assay results have only been reported for nickel values >0.1% Ni in metasedimentary rocks and >0.3% Ni in ultramafic rocks. Figure 2. Halfway Lake - Conductive Trend HL-04 Drillhole Location MapTo view an enhanced version of this graphic, please visit: Figure 3. Top: Massive sulphides in HFW-25-007 returned 0.80% Ni over 70 cm from 72.8 to 73.5 mBottom: Close-up of massive sulphides at 73.3 m in HFW-25-007. To view an enhanced version of this graphic, please visit: Geochemical Sampling Procedures All drill core samples were shipped to Saskatchewan Research Council Geoanalytical Laboratories (SRC) in Saskatoon, Saskatchewan in secure containment for preparation, processing, and ICP-OES analysis for major and minor elements and ICP-MS analysis for trace elements using total 4-acid digestion (HF:HNO3:HCl:HClO4). Any samples returning greater than 5,000 ppm Ni, Cu, or Co were then analyzed using a base metal assay (ICP3 Assay) for Ni, Cu, and Co, where an aliquot of sample pulp is digested in HCl:HNO3 and the digested volume is then made up with deionized water for analysis by inductively coupled plasma optical emission spectroscopy (ICP-OES). The detection limit for Ni, Cu, and Co using this method is 0.001 wt%. Assay samples comprise 0.1 - 4.4 metre, generally 1.0 metre, continuous ½ NQ core samples or ¼ NQ core for duplicates over the sulfide mineralized intervals. The SRC is an ISO/IEC 17025/2005 and Standards Council of Canada certified analytical laboratory. Blanks, standard reference materials, and duplicates are inserted into the sample stream at regular intervals by Core Nickel and the SRC in accordance with Core Nickel's quality assurance/quality control (QA/QC) procedures. Geochemical assay data are subject to verification procedures by qualified persons employed by Core Nickel prior to disclosure. All reported depths and intervals are drillhole depths and intervals, unless otherwise noted, and do not represent true thicknesses, which have yet to be determined. Mel Deposit Update To support the development of a modern NI 43-101 compliant mineral resource estimate for the Mel deposit, Understood Mineral Resources Ltd. has recommended that Core Nickel twin five spatially representative historical drill holes, resample five to ten holes from different historical programs-where core is accessible-that span a range of nickel grades and are spatially distributed across the deposit, and collect representative density measurements. Core Nickel has been diligently working to compile, verify, and clean up the historical dataset to support construction of a modern 3D geological model. These efforts aim to validate and strengthen the existing data and underpin the development of a robust and modern geological interpretation for the project. About Core Nickel Core Nickel Corp. is a junior nickel exploration company that controls 100% of five projects in the Thompson Nickel Belt (TNB), a prolific nickel district located in Northern Manitoba, Canada (Figure 7). The five projects consist of approximately 27,000 hectares of land that is proximal to existing infrastructure, including highways, railways, major hydroelectric transmission lines, and operating mills. Core Nickel has a large contiguous land package in the northern part of the TNB, situated approximately 15-20 km from the City of Thompson. Core Nickel's northern TNB land package consists of three projects: Mel, Hunter, and Odei River. The Mel project encompasses the Mel deposit, which is characterized by a historical mineral resource consisting of an indicated resource of 4,279,000 tons grading 0.875% Ni, plus an inferred resource of 1,010,000 tons grading 0.839% Ni, at a cut-off of 0.5% Ni1. The target stratigraphy (Pipe Formation) that hosts the Mel deposit, and other deposits in the Thompson Nickel Belt, extend onto the Hunter and Odei River projects and drillhole intersections into the target stratigraphy on the Hunter project have successfully intersected anomalous nickel. The Company also holds two projects in the central TNB near the community of Wabowden: Halfway Lake and Resting Lake. Both projects host the target Pipe Formation associated with known elevated nickel mineralization and are proximal to existing nickel deposits, mills, and other infrastructure. Figure 4. Core Nickel Project Location Map To view an enhanced version of this graphic, please visit: The Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects for this news release is Caitlin Glew, P. Geo., Vice-President Exploration for Core Nickel Corp., who has reviewed and approved its contents. References 1 "Technical Report on the Mel Deposit, Northern Manitoba" prepared for Victory Nickel Inc, Shane Naccashian (P. Geo.) of Wardrop Engineering Inc., March 9, 2007 Mel Historical Mineral Resource Core Nickel Corporation is treating the 2007 Mineral Resource Estimate (MRE) prepared for Victory Nickel Inc. by Shane Naccashian (P. Geo.) of Wardrop Engineering Inc. as a "historical mineral resource" under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the reader is cautioned not to treat it, or any part of it, as a current mineral resource. Core Nickel has not done sufficient work to classify the historical estimate as a current mineral resource. The historical MRE summarized above has been included simply to demonstrate the mineral potential of the Mel deposit and the Mel project. Core Nickel considers the 2007 MRE to be relevant to the further development of the project; however, is not treating the historical estimate as a current mineral resource. The historical MRE was calculated in accordance with NI 43-101 and CIM standards at the time of publication and predates the current CIM Definition Standards for Mineral Resources and Mineral Reserves (May, 2014) and CIM Estimation of Mineral Resources & Mineral Reserves Best Practices Guidelines (November, 2019). To upgrade or verify the 2007 historical estimate as current, Core Nickel will need to complete a thorough review of all the 2007 historical MRE information and drill data, along with the incorporation of subsequent exploration work and results, which includes some drilling around the edges of the historical MRE subsequent to the publication of the resource. Additionally, a full review of the economic parameters utilized to determine current Reasonable Prospectus for Eventual Economic Extraction (RPEEE) would be required in order to produce a current MRE for the Property. Any future mineral resource will need to evaluate the open pit and/or underground potential taking into consideration the current cost and pricing conditions or constraints, along with continuity of the resource blocks. Technical Disclosure The historical results contained within this news release have been captured from Manitoba Integrated Mining and Quarrying System ("iMaQs") as available and may be incomplete or subject to minor location inaccuracies. Management cautions that historical results were collected and reported by past operators and have not been verified nor confirmed by a Qualified Person but form a basis for ongoing work on the subject projects. On behalf of the Board of Directors"Misty Urbatsch"Misty UrbatschCEO, President and DirectorCore Nickel Corp. Contacts: Misty Urbatsch, CEO and President General Enquiry Tel: 306-668-6927 Tel: 306-668-6927 Email: murbatsch@ Email: info@ Also find us online: Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Forward-looking information All statements included in this press release that address activities, events or developments that the Company expects, believes or anticipates will or may occur in the future are forward-looking statements. These forward-looking statements involve numerous assumptions made by the Company based on its experience, perception of historical trends, current conditions, expected future developments and other factors it believes are appropriate in the circumstances. In addition, these statements involve substantial known and unknown risks and uncertainties that contribute to the possibility that the predictions, forecasts, projections and other forward-looking statements will prove inaccurate, certain of which are beyond the Company's control. Readers should not place undue reliance on forward-looking statements. Except as required by law, the Company does not intend to revise or update these forward-looking statements after the date hereof or revise them to reflect the occurrence of future unanticipated events. To view the source version of this press release, please visit Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
14-04-2025
- Business
- Yahoo
Core Nickel Receives $300,000 Grant from the Manitoba Mineral Development Fund
Saskatoon, Saskatchewan--(Newsfile Corp. - April 14, 2025) - Core Nickel Corp. (CSE: CNCO) ("Core Nickel" or the "Company") is pleased to announce it has been approved for a $300,000 grant from the Manitoba Mineral Development Fund ("MMDF") to support exploration activities on its projects in the Thompson Nickel Belt, Manitoba. The company has received the first $100,000 of the grant, with the remainder expected by June 2025. Misty Urbatsch, President and CEO of Core Nickel Corp. commented, "Core Nickel sincerely appreciates the support from the Manitoba Mineral Development Fund and the Manitoba Chambers of Commerce. This $300,000 non-repayable grant provides non-dilutive funding to advance our exploration efforts in the Thompson Nickel Belt and reinforces our confidence in Manitoba as a premier jurisdiction for critical mineral exploration." The Manitoba Mineral Development Fund (MMDF) is a $20M provincial fund, administered by the Manitoba Chambers of Commerce, that provides funding for northern economic development and mining projects that create Indigenous partnerships, increase local employment, and stimulate investment in Northern Manitoba ( About Core Nickel Core Nickel Corp. is a junior nickel exploration company that controls 100% of five projects in the Thompson Nickel Belt (TNB), a prolific nickel district located in Northern Manitoba, Canada (Figure 1). The five projects consist of approximately 27,000 hectares of land that is proximal to existing infrastructure, including highways, railways, major hydroelectric transmission lines, and operating mills. Figure 1- Core Nickel Project Location Map To view an enhanced version of this graphic, please visit: Core Nickel has a large contiguous land package in the northern part of the TNB, situated approximately 15-20 km from the City of Thompson. Core Nickel's northern TNB land package consists of three projects: Mel, Hunter, and Odei River. The Mel project encompasses the Mel deposit, which is characterized by a historical mineral resource consisting of an indicated resource of 4,279,000 tons grading 0.875% Ni, plus an inferred resource of 1,010,000 tons grading 0.839% Ni, at a cut-off of 0.5% Ni.1 The target stratigraphy (Pipe Formation) that hosts the Mel deposit, and other deposits in the Thompson Nickel Belt, extend onto the Hunter and Odei River projects and drillhole intersections into the target stratigraphy on the Hunter project have successfully intersected anomalous nickel. The Company also holds two projects in the central TNB near the community of Wabowden: Halfway Lake and Resting Lake. Both projects host the target Pipe Formation associated with known elevated nickel mineralization and are proximal to existing nickel deposits, mills, and other infrastructure. The Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects for this news release is Caitlin Glew, P. Geo., Vice-President Exploration for Core Nickel Corp., who has reviewed and approved its contents. References 1 (n.d.). 2 "Technical Report on the Mel Deposit, Northern Manitoba" prepared for Victory Nickel Inc, Shane Naccashian (P. Geo.) of Wardrop Engineering Inc., March 9, 2007 Mel Historical Mineral Resource Core Nickel Corporation is treating the 2007 Mineral Resource Estimate (MRE) prepared for Victory Nickel Inc. by Shane Naccashian (P. Geo.) of Wardrop Engineering Inc. as a "historical mineral resource" under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the reader is cautioned not to treat it, or any part of it, as a current mineral resource. Core Nickel has not done sufficient work to classify the historical estimate as a current mineral resource. The historical MRE summarized above has been included simply to demonstrate the mineral potential of the Mel deposit and the Mel project. Core Nickel considers the 2007 MRE to be relevant to the further development of the project; however, is not treating the historical estimate as a current mineral resource. The historical MRE was calculated in accordance with NI 43-101 and CIM standards at the time of publication and predates the current CIM Definition Standards for Mineral Resources and Mineral Reserves (May, 2014) and CIM Estimation of Mineral Resources & Mineral Reserves Best Practices Guidelines (November, 2019). To upgrade or verify the 2007 historical estimate as current, Core Nickel will need to complete a thorough review of all the 2007 historical MRE information and drill data, along with the incorporation of subsequent exploration work and results, which includes some drilling around the edges of the historical MRE subsequent to the publication of the resource. Additionally, a full review of the economic parameters utilized to determine current Reasonable Prospectus for Eventual Economic Extraction (RPEEE) would be required in order to produce a current MRE for the Property. Any future mineral resource will need to evaluate the open pit and/or underground potential taking into consideration the current cost and pricing conditions or constraints, along with continuity of the resource blocks. Technical Disclosure The historical results contained within this news release have been captured from Manitoba Integrated Mining and Quarrying System ("iMaQs") as available and may be incomplete or subject to minor location inaccuracies. Management cautions that historical results were collected and reported by past operators and have not been verified nor confirmed by a Qualified Person but form a basis for ongoing work on the subject projects. On behalf of the Board of Directors"Misty Urbatsch"Misty UrbatschCEO, President and Director Core Nickel Corp. Contacts: Misty Urbatsch, CEO and President General Enquiry Tel: 306-668-6927 Tel: 306-668-6927 Email: murbatsch@ Email: info@ Also find us online: Neither the Canadian Securities Exchange nor its regulations services accept responsibility for the adequacy or accuracy of this release. Forward-Looking information All statements included in this press release that address activities, events or developments that the Company expects, believes or anticipates will or may occur in the future are forward-looking statements. These forward-looking statements involve numerous assumptions made by the Company based on its experience, perception of historical trends, current conditions, expected future developments and other factors it believes are appropriate in the circumstances. In addition, these statements involve substantial known and unknown risks and uncertainties that contribute to the possibility that the predictions, forecasts, projections and other forward-looking statements will prove inaccurate, certain of which are beyond the Company's control. Readers should not place undue reliance on forward-looking statements. Except as required by law, the Company does not intend to revise or update these forward-looking statements after the date hereof or revise them to reflect the occurrence of future unanticipated events. To view the source version of this press release, please visit Sign in to access your portfolio
Yahoo
30-01-2025
- Business
- Yahoo
Core Nickel Commences Property-Wide Airborne Electromagnetic Surveys on its 100%-Owned Mel and Odei River Projects and Grants Stock Options
Saskatoon, Saskatchewan--(Newsfile Corp. - January 30, 2025) - Core Nickel Corp. (CSE: CNCO) ("Core Nickel" or the "Company") is pleased to announce that Geotech Ltd. has commenced helicopter-borne geophysical surveys, including time domain electromagnetics (VTEM) and horizontal magnetic gradiometer using the VTEM™ Plus geophysical system on the Company's 100%-owned Mel and Odei River projects (the "Projects") (Figure 1), as stated in the Company's news release on January 27, 2025. The Projects are situated approximately 20 km to the northwest of Thompson, Manitoba, in the northern region of the Thompson Nickel Belt. The Projects are strategically located in proximity to infrastructure, including Provincial Highway 6, the HBR (Omnitrax) Rail Line and a major hydroelectric transmission line, offering excellent access for future development. Figure 1 - Mel and Odei River Projects Location Map To view an enhanced version of this graphic, please visit: The geophysical surveys will cover approximately 379 line-km on the Mel project and approximately 1,520 line-km on the Odei River project, with 100 m line spacing on both projects (Figure 2). The geophysical surveys will obtain both new coverage and refine historical EM survey results. Upon completion of the VTEM survey on the Mel and Odei River projects, the Company will have modern VTEM coverage across its entire project portfolio, enabling a more comprehensive and strategic approach to target prioritization and exploration planning. The helicopter-borne VTEM™ Plus system, which is known for its high-resolution imaging capabilities, is a versatile time domain electromagnetic system that is particularly useful for locating discrete conductive anomalies. Additionally, the system also contains a high-sensitivity cesium magnetometer-gradiometer for mapping geologic structure and lithology. The survey is being conducted by Geotech Ltd. of Aurora, Ontario, and under the guidance of Stephen Balch, of Balch Exploration Consulting Inc. of Rockwood, Ontario. Figure 2 - Mel and Odei River VTEM Survey Plan To view an enhanced version of this graphic, please visit: Misty Urbatsch, CEO, President, and Director of Core Nickel, commented "Core Nickel is making exciting strides in advancing our exploration efforts on our Mel and Odei River projects with the VTEM survey. Historical drilling at the Mel and Odei River projects over the past 50 years has focused on depths averaging only 200 metres, while the VTEM survey will test depths of up to 400 metres. The near-surface Mel deposit was discovered in the 1960's at approximately 50 metres. Therefore, the new VTEM survey will provide us with a better understanding of the geology and new opportunities for discovery. While previous exploration has primarily targeted shallow mineralization, we see potential below 200 metres, as the neighbouring Thompson mine operates at a depth greater than 1,000 metres in a similar geological setting. This deeper exploration could unlock significant value on our Mel and Odei River projects. A VTEM survey completed on our 100%-owned Halfway Lake project in 2024 identified 14 high-priority targets. These targets will be drill-tested in a 4,000 to 5,000 metre diamond drill program set to commence in the coming weeks. The VTEM survey on the Mel and Odei River projects and our diamond drill program on our Halfway Lake project are exciting steps forward as we continue to explore the full potential of our assets in the Thompson Nickel Belt." Figure 3 - Northern Thompson Nickel Belt Projects: Mel, Hunter, and Odei River To view an enhanced version of this graphic, please visit: The Mel project (Figure 3) hosts the Mel deposit, which is characterized by a historical mineral resource consisting of an indicated resource of 4.28 million tons grading 0.875% nickel (Ni), plus an inferred resource of 1.01 million tons grading 0.839% Ni, at a cut-off of 0.5% Ni.1 The deposit offers significant potential for expansion at depth through ongoing exploration efforts. The Mel project has not had an electromagnetic survey completed since 2004, and the new VTEM™ Plus survey will be crucial to better understand the geology of the Mel deposit and the Mel project. The VTEM™ Plus survey will guide future drill programs to expand the known resource, improve the overall understanding of the deposit's structure, and highlight additional exploration targets on the project. The Odei River project (Figure 3), located to the southwest of the Mel project, presents additional exploration potential. This project is underexplored and has not had a geophysical survey conducted on it since 2003. The VTEM survey will assist in identifying new conductors, which could be indicative of nickel sulphide mineralization, and will help to refine the geological model of the project. This survey represents an important step in unlocking the potential of the Odei River project, guiding future exploration efforts and drill programs in an area that has seen limited exploration to date. Photo 1 - Helicopter Preparing for VTEM Survey at Thompson, Manitoba Airport To view an enhanced version of this graphic, please visit: Stock Options Grant The Company also announces that it has granted incentive stock options to certain directors and officers to purchase up to an aggregate of 1,900,000 common shares of Core Nickel pursuant to the Company's share option plan. The options are exercisable for a period of 3 years at a price of $0.175. The options, and any underlying common shares issued on exercise thereof, will have a hold period expiring May 31, 2025, in accordance with the policies of the CSE and applicable securities laws. Other Business The Company has received the final tranche of $69,100 as nonrepayable funding from the Manitoba Mineral Development Fund (the "MMDF") in November 2024. The total grant awarded to the Company from the MMDF is $207,000. MMDF is a $20M provincial fund administered by the Manitoba Chambers of Commerce that provides funding to strategic economic development projects in northern Manitoba. About Core Nickel Core Nickel Corp. is a junior nickel exploration company that controls 100% of five projects in the prolific nickel district, the Thompson Nickel Belt (TNB) in Northern Manitoba, Canada. The five projects consist of approximately 27,000 hectares of land that is proximal to existing infrastructure, including highways, railways, major hydroelectric transmission lines, and operating mills. Core Nickel has a large contiguous land package in the northern part of the TNB, situated approximately 15-20 km from the City of Thompson. Core Nickel's northern TNB land package consists of three projects: Mel, Hunter, and Odei River. The Mel project encompasses the Mel deposit, which is characterized by a historical mineral resource consisting of an indicated resource of 4,279,000 tons grading 0.875% Ni, plus an inferred resource of 1,010,000 tons grading 0.839% Ni, at a cut-off of 0.5% Ni.1 The target stratigraphy (Pipe Formation) that hosts the Mel deposit, and other deposits in the Thompson Nickel Belt, extend onto the Hunter and Odei River projects and drillhole intersections into the target stratigraphy on the Hunter project have successfully intersected anomalous nickel. The Company also holds two projects in the central TNB near Wabowden: Halfway Lake and Resting Lake. Both projects host the target Pipe Formation associated with known elevated nickel mineralization and are proximal to existing nickel deposits, mills, and other infrastructure. The Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects for this news release is Caitlin Glew, P. Geo., Vice-President Exploration for Core Nickel Corp., who has reviewed and approved its contents. References 1 "Technical Report on the Mel Deposit, Northern Manitoba" prepared for Victory Nickel Inc, ShaneNaccashian (P. Geo.) of Wardrop Engineering Inc., March 9, 2007 Mel Historical Mineral Resource Core Nickel Corporation is treating the 2007 Mineral Resource Estimate (MRE) prepared for Victory Nickel Inc. by Shane Naccashian (P. Geo.) of Wardrop Engineering Inc. as a "historical mineral resource" under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the reader is cautioned not to treat it, or any part of it, as a current mineral resource. Core Nickel has not done sufficient work to classify the historical estimate as a current mineral resource. The historical MRE summarized above has been included simply to demonstrate the mineral potential of the Mel deposit and the Mel project. Core Nickel considers the 2007 MRE to be relevant to the further development of the project; however, is not treating the historical estimate as a current mineral resource. The historical MRE was calculated in accordance with NI 43-101 and CIM standards at the time of publication and predates the current CIM Definition Standards for Mineral Resources and Mineral Reserves (May, 2014) and CIM Estimation of Mineral Resources & Mineral Reserves Best Practices Guidelines (November, 2019). To upgrade or verify the 2007 historical estimate as current, Core Nickel will need to complete a thorough review of all the 2007 historical MRE information and drill data, along with the incorporation of subsequent exploration work and results, which includes some drilling around the edges of the historical MRE subsequent to the publication of the resource. Additionally, a full review of the economic parameters utilized to determine current Reasonable Prospectus for Eventual Economic Extraction (RPEEE) would be required in order to produce a current MRE for the Property. Any future mineral resource will need to evaluate the open pit and/or underground potential taking into consideration the current cost and pricing conditions or constraints, along with continuity of the resource blocks. Technical Disclosure The historical results contained within this news release have been captured from Manitoba Integrated Mining and Quarrying System ("iMaQs") as available and may be incomplete or subject to minor location inaccuracies. Management cautions that historical results were collected and reported by past operators and have not been verified nor confirmed by a Qualified Person but form a basis for ongoing work on the subject projects. On behalf of the Board of Directors"Misty Urbatsch"Misty UrbatschCEO, President and DirectorCore Nickel Corp. Contacts: Misty Urbatsch, CEO and President General Enquiry Tel: 306-668-6927 Tel: 306-668-6927 Email: murbatsch@ Email: info@ Also find us online: Neither the Canadian Securities Exchange nor its regulations services accept responsibility for the adequacy or accuracy of this release. Forward-looking information All statements included in this press release that address activities, events or developments that the Company expects, believes or anticipates will or may occur in the future are forward-looking statements. These forward-looking statements involve numerous assumptions made by the Company based on its experience, perception of historical trends, current conditions, expected future developments and other factors it believes are appropriate in the circumstances. In addition, these statements involve substantial known and unknown risks and uncertainties that contribute to the possibility that the predictions, forecasts, projections and other forward-looking statements will prove inaccurate, certain of which are beyond the Company's control. Readers should not place undue reliance on forward-looking statements. Except as required by law, the Company does not intend to revise or update these forward-looking statements after the date hereof or revise them to reflect the occurrence of future unanticipated events. To view the source version of this press release, please visit Sign in to access your portfolio
