Latest news with #NIMR
India Today
3 days ago
- Health
- India Today
Why it's drone war against dengue, malaria in Goa
The Goa government, in a new strategy against vector-borne diseases dengue and malaria, is planning to use drones to identify mosquito-breeding sites and take measures to control them. Two high-risk sites—one urban and one rural—will be identified in North Goa and South Goa for the research study, which is planned to be scaled up to cover the state, depending on the outcomes.'This will help us reach overhead tanks of buildings and roof gutters where there is water leakage and stagnation (leading to breeding of mosquitoes). There have been instances where we have reported cases but breeding sites have not been observed as we have been unable to reach them,' said Dr Kalpana Mahatme, state programme officer and deputy director of the National Vector Borne Diseases Control project is being undertaken with the National Institute of Malaria Research (NIMR), Goa branch, and will cover two urban pockets and two primary health centres (PHCs) in rural areas, which are high-risk places due to incidences of will be used to identify breeding sites and spray insecticide. The procurement of four drones is in process. 'Once we get good results, we will scale it up all over Goa,' explained Mahatme. Goa is witnessing rapid urbanisation with a spurt in the development of highrises and residential complexes. It may be difficult to access some parts of these buildings where mosquitoes may breed. People also travel from remote areas to cities for work, and may end up being carriers of dengue and 2022, Goa reported 443 cases of dengue and one fatality. This rose to 512 cases and three deaths in 2023, and 567 cases and three deaths in said they were also planning an app-based research study with the NIMR for tracking the movement of migrant labour to prevent malaria. Under this, the contractors will have to install an app on the phones of labourers to help the department track their movements and enable the local PHC staff and those from the NIMR to conduct rapid tests and blood case of positive cases, it will help track the movements of these workers. According to the Goa Public Health Act, 1985, it is mandatory for all construction workers, especially migrant workers, to be screened for malaria and other diseases. They must also be given a health card issued by the public health department. Any violation by the contractors entails a fine of Rs 10, indigenous cases of malaria (those among the local population) have been nil for the past two years. Goa, however, has imported cases from other states due to the migrant population that flocks to the coastal state from Karnataka, Jharkhand, Bihar, Uttar Pradesh and 2022, Goa had two cases of malaria and no deaths. In 2023 and 2024, there were no positive cases and no fatalities. The state has not reported any malaria deaths since 2018. Goa is targeting the elimination of malaria by to India Today Magazine
Mid East Info
20-02-2025
- Automotive
- Mid East Info
EDGE Launches New Armoured and Robotic Combat Vehicle at IDEX 2025 - Middle East Business News and Information
NIMR Expands AJBAN MK2 Series, MILREM ROBOTICS Unveils HAVOC RCV, and AL JASOOR Introduces RABDAN Recovery Vehicle. Abu Dhabi, UAE:February 2025 – EDGE, one of the world's leading advanced technology and defence groups, has unveiled five cutting-edge land platforms at the International Defence Exhibition and Conference (IDEX) 2025, held at the Abu Dhabi National Exhibition Centre (ADNEC) from 17 to 21 February. These include three new variants of NIMR's AJBAN MK2, MILREM's HAVOC 8×8 Robotic Combat Vehicle (RCV), and AL JASOOR's upgraded RABDAN 8×8 Recovery Vehicle. Khaled Al Zaabi, President – Platforms & Systems, EDGE, said: 'As we continue to expand our land systems portfolio, EDGE is delivering advanced, globally competitive solutions that address the full spectrum of operational requirements – manned and unmanned. Through NIMR, MILREM ROBOTICS, and AL JASOOR, we are strengthening our capabilities with cutting-edge platforms that enhance mobility, survivability, and mission effectiveness. By investing in innovation and scalable technologies, we are positioning EDGE as a leader in next-generation land systems, ensuring our solutions remain at the forefront of modern warfare and meet the evolving demands of global defence forces.' NIMR has unveiled three new multi-role armoured vehicle variants in the AJBAN series, each designed for mission-specific versatility. These new AJBANs belong to a growing family of vehicles that share a common platform and subsystems, enhancing scalability and offering users multiple options. This approach ensures an optimised logistical footprint, making the vehicles easier to support and maintain. With expanded crew capacity, the MK2 AJBAN 452A accommodates up to eleven personnel, making it ideal as an Armoured Personnel Carrier (APC), Observation, Ambulance, or Internal Security vehicle. The AJBAN 432AU is a versatile, blast-protected light tactical logistics and utility vehicle with an upgraded three-crew capacity, specifically developed to accommodate a mortar system. Optimised for command, control, and communication integration, it features scalable heavy-duty axles with multiple axle options. Built on a proven NIMR chassis, the AJBAN 441AE is a robust five-crew platform designed for logistics and mortar carrier operations. Engineered for operational support, it features a longer wheelbase and a modular internal layout, allowing seamless adaptation for cargo transport, shelters, and mortar carrier configurations. Additionally, both the AJBAN 432AU and 441AE can carry a shelter, further enhancing their versatility. Furthermore, the new AJBANs are part of a growing family of vehicles, all sharing a common platform and subsystems. This approach enhances scalability, providing users with multiple options while ensuring an optimised logistical footprint, making the vehicles easier to support and maintain. MILREM ROBOTICS, the world's leading robotics and autonomous systems developer in which EDGE holds a majority stake, has launched the HAVOC 8×8 Robotic Combat Vehicle (RCV), marking a major advancement in hybrid unmanned ground vehicle (UGV) technology. Designed for high-speed manoeuvrability and extended-range force projection, HAVOC is engineered to enhance battlefield agility while integrating large-calibre weaponry for superior lethality. Powered by a hybrid-electric powertrain, HAVOC operates near-silently for enhanced stealth and adaptability. Weighing significantly less than manned 8×8 vehicles, it delivers superior off-road performance, instantaneous torque delivery, and pivot steering for optimal mobility in rugged and urban terrains. AL JASOOR, a joint venture between EDGE and Otokar, has launched the upgraded RABDAN Recovery, a high-performance 8×8 armoured recovery vehicle designed for rapid battlefield operations. Powered by a 720 HP engine, it offers exceptional mobility and high ballistic and mine protection to ensure crew safety during recovery missions. Equipped with a hydraulic winch, dozer blade, and long-reach crane, the RABDAN Recovery can lift, transport, and position turret systems, power packs, and protection kits with precision. Its independent suspension and all-axle steering enhance agility, while integrated stabilisers ensure operational stability, making it a mission-critical asset for battlefield support. IDEX visitors can explore EDGE's portfolio at stand C20 in Hall 5 and outdoor stand CP-270 from 17 to 21 February. About EDGE: Launched in November 2019, the UAE's EDGE is one of the world's leading advanced technology groups, established to develop agile, bold and disruptive solutions for defence and beyond, and to be a catalyst for change and transformation. It is dedicated to bringing breakthrough innovations, products, and services to market with greater speed and efficiency, to position the UAE as a leading global hub for future industries, and creating clear paths within the sector for the next generation of highly skilled talent to thrive. With a focus on the adoption of 4IR technologies, EDGE is driving the development of sovereign capabilities for global export and for the preservation of national security, working with front-line operators, and international partners, and adopting advanced technologies such as autonomous capabilities, cyber-physical systems, advanced propulsion systems, robotics and smart materials. EDGE converges R&D, emerging technologies, digital transformation, and commercial market innovations with military capabilities to develop disruptive solutions tailored to the specific requirements of its customers. Headquartered in Abu Dhabi, capital of the UAE, EDGE consolidates more than 35 entities into six core clusters: Platforms & Systems, Missiles & Weapons, Space & Cyber Technologies, Trading & Mission Support, Technology & Innovation, and Homeland Security.
Trade Arabia
19-02-2025
- Automotive
- Trade Arabia
EDGE launches new armoured and robotic combat vehicle at IDEX
EDGE, one of the world's leading advanced technology and defence groups, has unveiled five cutting-edge land platforms at the International Defence Exhibition and Conference (IDEX) 2025, being held at the Abu Dhabi National Exhibition Centre (Adnec). These include three new variants of NIMR's Ajban MK2, Milrem's Havoc 8x8 Robotic Combat Vehicle (RCV), and Al Jasoor's upgraded Rabdan 8x8 Recovery Vehicle. Khaled Al Zaabi, President – Platforms & Systems, EDGE, said: 'As we continue to expand our land systems portfolio, EDGE is delivering advanced, globally competitive solutions that address the full spectrum of operational requirements – manned and unmanned. Through NIMR, Milrem Robotics, and Al Jasoor, we are strengthening our capabilities with cutting-edge platforms that enhance mobility, survivability, and mission effectiveness. By investing in innovation and scalable technologies, we are positioning EDGE as a leader in next-generation land systems, ensuring our solutions remain at the forefront of modern warfare and meet the evolving demands of global defence forces.' NIMR has unveiled three new multi-role armoured vehicle variants in the Ajba series, each designed for mission-specific versatility. These new AJBANs belong to a growing family of vehicles that share a common platform and subsystems, enhancing scalability and offering users multiple options. This approach ensures an optimised logistical footprint, making the vehicles easier to support and maintain. With expanded crew capacity, the MK2 Ajban 452A accommodates up to 11 personnel, making it ideal as an Armoured Personnel Carrier (APC), observation, ambulance, or internal security vehicle. The Ajabn 432AU is a versatile, blast-protected light tactical logistics and utility vehicle with an upgraded three-crew capacity, specifically developed to accommodate a mortar system. Optimised for command, control, and communication integration, it features scalable heavy-duty axles with multiple axle options. Built on a proven NIMR chassis, the Ajban 441AE is a robust five-crew platform designed for logistics and mortar carrier operations. Engineered for operational support, it features a longer wheelbase and a modular internal layout, allowing seamless adaptation for cargo transport, shelters, and mortar carrier configurations. Additionally, both the AJBAN 432AU and 441AE can carry a shelter, further enhancing their versatility. Furthermore, the new Ajbans are part of a growing family of vehicles, all sharing a common platform and subsystems. This approach enhances scalability, providing users with multiple options while ensuring an optimised logistical footprint, making the vehicles easier to support and maintain. Milrem Robotics, the world's leading robotics and autonomous systems developer in which EDGE holds a majority stake, has launched the Havoc 8x8 Robotic Combat Vehicle (RCV), marking a major advancement in hybrid unmanned ground vehicle (UGV) technology. Designed for high-speed manoeuvrability and extended-range force projection, Havoc is engineered to enhance battlefield agility while integrating large-calibre weaponry for superior lethality. Powered by a hybrid-electric powertrain, Havoc operates near-silently for enhanced stealth and adaptability. Weighing significantly less than manned 8x8 vehicles, it delivers superior off-road performance, instantaneous torque delivery, and pivot steering for optimal mobility in rugged and urban terrains. Al Jasoor, a joint venture between EDGE and Otokar, has launched the upgraded Rabdan Recovery, a high-performance 8x8 armoured recovery vehicle designed for rapid battlefield operations. Powered by a 720 HP engine, it offers exceptional mobility and high ballistic and mine protection to ensure crew safety during recovery missions. Equipped with a hydraulic winch, dozer blade, and long-reach crane, the Rabdan Recovery can lift, transport, and position turret systems, power packs, and protection kits with precision. Its independent suspension and all-axle steering enhance agility, while integrated stabilisers ensure operational stability, making it a mission-critical asset for battlefield support.
Zawya
19-02-2025
- Automotive
- Zawya
EDGE launches new armoured and robotic combat vehicle at IDEX 2025
Abu Dhabi, UAE – EDGE, one of the world's leading advanced technology and defence groups, has unveiled five cutting-edge land platforms at the International Defence Exhibition and Conference (IDEX) 2025, held at the Abu Dhabi National Exhibition Centre (ADNEC) from 17 to 21 February. These include three new variants of NIMR's AJBAN MK2, MILREM's HAVOC 8x8 Robotic Combat Vehicle (RCV), and AL JASOOR's upgraded RABDAN 8x8 Recovery Vehicle. Khaled Al Zaabi, President – Platforms & Systems, EDGE, said: 'As we continue to expand our land systems portfolio, EDGE is delivering advanced, globally competitive solutions that address the full spectrum of operational requirements – manned and unmanned. Through NIMR, MILREM ROBOTICS, and AL JASOOR, we are strengthening our capabilities with cutting-edge platforms that enhance mobility, survivability, and mission effectiveness. By investing in innovation and scalable technologies, we are positioning EDGE as a leader in next-generation land systems, ensuring our solutions remain at the forefront of modern warfare and meet the evolving demands of global defence forces.' NIMR has unveiled three new multi-role armoured vehicle variants in the AJBAN series, each designed for mission-specific versatility. These new AJBANs belong to a growing family of vehicles that share a common platform and subsystems, enhancing scalability and offering users multiple options. This approach ensures an optimised logistical footprint, making the vehicles easier to support and maintain. With expanded crew capacity, the MK2 AJBAN 452A accommodates up to eleven personnel, making it ideal as an Armoured Personnel Carrier (APC), Observation, Ambulance, or Internal Security vehicle. The AJBAN 432AU is a versatile, blast-protected light tactical logistics and utility vehicle with an upgraded three-crew capacity, specifically developed to accommodate a mortar system. Optimised for command, control, and communication integration, it features scalable heavy-duty axles with multiple axle options. Built on a proven NIMR chassis, the AJBAN 441AE is a robust five-crew platform designed for logistics and mortar carrier operations. Engineered for operational support, it features a longer wheelbase and a modular internal layout, allowing seamless adaptation for cargo transport, shelters, and mortar carrier configurations. Additionally, both the AJBAN 432AU and 441AE can carry a shelter, further enhancing their versatility. Furthermore, the new AJBANs are part of a growing family of vehicles, all sharing a common platform and subsystems. This approach enhances scalability, providing users with multiple options while ensuring an optimised logistical footprint, making the vehicles easier to support and maintain. MILREM ROBOTICS, the world's leading robotics and autonomous systems developer in which EDGE holds a majority stake, has launched the HAVOC 8x8 Robotic Combat Vehicle (RCV), marking a major advancement in hybrid unmanned ground vehicle (UGV) technology. Designed for high-speed manoeuvrability and extended-range force projection, HAVOC is engineered to enhance battlefield agility while integrating large-calibre weaponry for superior lethality. Powered by a hybrid-electric powertrain, HAVOC operates near-silently for enhanced stealth and adaptability. Weighing significantly less than manned 8x8 vehicles, it delivers superior off-road performance, instantaneous torque delivery, and pivot steering for optimal mobility in rugged and urban terrains. AL JASOOR, a joint venture between EDGE and Otokar, has launched the upgraded RABDAN Recovery, a high-performance 8x8 armoured recovery vehicle designed for rapid battlefield operations. Powered by a 720 HP engine, it offers exceptional mobility and high ballistic and mine protection to ensure crew safety during recovery missions. Equipped with a hydraulic winch, dozer blade, and long-reach crane, the RABDAN Recovery can lift, transport, and position turret systems, power packs, and protection kits with precision. Its independent suspension and all-axle steering enhance agility, while integrated stabilisers ensure operational stability, making it a mission-critical asset for battlefield support. IDEX visitors can explore EDGE's portfolio at stand C20 in Hall 5 and outdoor stand CP-270 from 17 to 21 February. -Ends- About EDGE Launched in November 2019, the UAE's EDGE is one of the world's leading advanced technology groups, established to develop agile, bold and disruptive solutions for defence and beyond, and to be a catalyst for change and transformation. It is dedicated to bringing breakthrough innovations, products, and services to market with greater speed and efficiency, to position the UAE as a leading global hub for future industries, and creating clear paths within the sector for the next generation of highly skilled talent to thrive. With a focus on the adoption of 4IR technologies, EDGE is driving the development of sovereign capabilities for global export and for the preservation of national security, working with front-line operators, and international partners, and adopting advanced technologies such as autonomous capabilities, cyber-physical systems, advanced propulsion systems, robotics and smart materials. EDGE converges R&D, emerging technologies, digital transformation, and commercial market innovations with military capabilities to develop disruptive solutions tailored to the specific requirements of its customers. Headquartered in Abu Dhabi, capital of the UAE, EDGE consolidates more than 35 entities into six core clusters: Platforms & Systems, Missiles & Weapons, Space & Cyber Technologies, Trading & Mission Support, Technology & Innovation, and Homeland Security. For more information, visit For media enquiries, please contact: EDGE Group Press Office media@
Yahoo
05-02-2025
- Automotive
- Yahoo
Military Vehicle Sustainment Market Trends, Opportunities and Growth Forecasts to 2030, with Rheinmetall, Elbit Systems, Oshkosh, Lockheed Martin, L3Harris Technologies, ManTech, Honeywell & More
Military Vehicle Sustainment Market Dublin, Feb. 05, 2025 (GLOBE NEWSWIRE) -- The "Military Vehicle Sustainment Market - Global Industry Size, Share, Trends, Opportunity, and Forecast, 2020-2030F" report has been added to Military Vehicle Sustainment Market was valued at USD 17.22 Billion in 2024, and is expected to reach USD 25.85 Billion by 2030, rising at a CAGR of 7.07%. The demand for sustainment services for aging military vehicles is increasing. These services are essential for keeping military vehicles operational. Government support and rising investments are driving the development of military vehicles, further accelerating the growth of the Military Vehicle Sustainment market. These services improve vehicle efficiency and extend the lifespan of military assets. Various maintenance approaches, such as condition-based maintenance and predictive maintenance, are employed to ensure the optimal functioning of military military vehicle sustainment sector is experiencing a significant shift towards the development of next-generation armored vehicles and comprehensive product line improvements. Modernization efforts are focused on enhancing vehicle capabilities and ensuring they meet evolving operational demands. Manufacturers are placing a strong emphasis on innovation and flexibility in their designs to address a wide range of customer requirements. In February 2024, EDGE Group's NIMR introduced the JAIS Mark 2 (MK2), showcasing the successful development of its next-generation armored vehicle series. As a leading manufacturer of combat-tested wheeled military vehicles, NIMR unveiled the second-generation JAIS MK2 at the World Defense Show (WDS) 2024. Key Market Trends Adoption of Predictive Maintenance and Smart TechnologiesA major trend in the Global Military Vehicle Sustainment Market is the increasing adoption of predictive maintenance and smart technologies. By leveraging data analytics, Internet of Things (IoT) devices, and artificial intelligence (AI), military forces can predict potential failures before they occur. Sensors embedded within vehicles monitor key parameters like engine temperature, pressure levels, and component real-time data is then analyzed using AI algorithms to forecast when a vehicle is likely to require maintenance or experience a breakdown. Predictive maintenance not only helps in reducing downtime but also optimizes the lifecycle of military vehicles, making maintenance more cost-effective. Instead of relying on routine inspections or reactive repairs, military organizations can now take a more proactive approach, addressing issues before they lead to operational disruptions. This trend is gaining momentum due to the growing availability of affordable IoT sensors, cloud computing, and the advancement of AI technology, making it increasingly feasible to implement on a large through Modular Design and UpgradesAnother key trend is the focus on modular design and system upgrades to prolong the lifespan of military vehicles. As defense budgets face constraints, military forces are opting to upgrade existing vehicles rather than procure new ones. Modular vehicle designs facilitate easier and more cost-effective upgrades, as specific components or systems can be replaced or enhanced without requiring a complete overhaul of the entire approach is especially beneficial for improving the technological capabilities of older vehicles, such as adding new communication systems, advanced armor, or hybrid propulsion systems. The flexibility offered by modular designs makes it easier to adapt vehicles to changing mission requirements without the need for entirely new platforms. This trend is particularly prominent in military sectors seeking to modernize without incurring the high costs associated with purchasing entirely new fleets. Modular design and upgrades are becoming integral to vehicle sustainment strategies, ensuring the continued relevance of military InsightsNorth America dominated the Global Military Vehicle Sustainment Market due to its substantial defense budgets, advanced technological capabilities, and the size of its military fleets. The United States, as a leading global military power, invests heavily in maintaining its vast array of military vehicles, which include combat vehicles, tactical trucks, and armored personnel carriers. The U.S. Army, Navy, and Marine Corps require constant sustainment to ensure these vehicles remain operational in diverse North America is at the forefront of adopting advanced sustainment technologies, such as predictive maintenance, AI-driven diagnostics, and modular upgrades, which further contribute to market growth. The region also benefits from robust defense contractors and suppliers, enhancing the efficiency of vehicle maintenance and parts procurement. Additionally, geopolitical concerns, particularly in relation to global security and defense commitments, drive continuous demand for vehicle sustainment services in North America, solidifying its market Market Players Rheinmetall BAE Systems General Dynamics Elbit Systems Oshkosh Corporation Lockheed Martin L3Harris Technologies Thales Group ManTech International Honeywell International Key Attributes: Report Attribute Details No. of Pages 187 Forecast Period 2024 - 2030 Estimated Market Value (USD) in 2024 $17.22 Billion Forecasted Market Value (USD) by 2030 $25.85 Billion Compound Annual Growth Rate 7.0% Regions Covered Global Report Scope:In this report, the global Military Vehicle Sustainment Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:Military Vehicle Sustainment Market, By Vehicle Type: Armored Vehicles Military Trucks Military Vehicle Sustainment Market, By Service: Maintenance, Repair, & Overhaul (MRO) Training and Support Parts and Components Supply Upgrades and Modernization Military Vehicle Sustainment Market, By End User: Army Navy Air Force Military Vehicle Sustainment Market, By Region: North America United States Canada Mexico Europe & CIS France Germany Spain Italy United Kingdom Asia-Pacific China Japan India Vietnam South Korea Australia Thailand Middle East & Africa South Africa Saudi Arabia UAE Turkey South America Brazil Argentina For more information about this report visit About is the world's leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends. Attachment Military Vehicle Sustainment Market CONTACT: CONTACT: Laura Wood,Senior Press Manager press@ For E.S.T Office Hours Call 1-917-300-0470 For U.S./ CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call +353-1-416-8900Sign in to access your portfolio
