Latest news with #VokeyDesign
USA Today
06-05-2025
- Sport
- USA Today
Titleist releases WedgeWorks Tour Toe Stamp wedges
Titleist releases WedgeWorks Tour Toe Stamp wedges A growing number of players on the PGA Tour have been requesting this throwback styling be added to their wedges, and now you can get it too. Over the last few years, Titleist's Vokey Design PGA Tour rep, Aaron Dill, has been getting more and more requests from players like Wyndham Clark, Will Zalatoris and Tom Kim to remove the loft, bounce and grind markings from their wedges and replace that information with simple, old-school looking letters that signify what the club is. So, instead of leaving '46°' on the end of a pitching wedge, Dill polished the numbers off and stamped in a 'P.' Through its WedgeWorks program, Titleist Vokey Design is now making these Toe Stamp wedges available to the public, while supplies last. Each of the Toe Stamp wedges has a raw steel finish, which means the metal will rust over time with exposure to moisture, and they come in a limited number of lofts and sole grinds: P: 46.10F 46.10F G: 50.08F, 52.08F 50.08F, 52.08F S: 54.10S, 54.14F, 56.10S, 56.14F 54.10S, 54.14F, 56.10S, 56.14F L: 58.08M, 58.12D, 60.04T, 60.08M Aside from the unique stamping, the WedgeWorks Toe Stamp wedges are identical to raw-finished versions of the standard SM10 wedges. The center of gravity (CG) location in Vokey SM10 wedges gets progressively higher as lofts increase. While extra mass low in the stronger lofts helps them produce a ball flight that performs like an extension of a player's iron set, adding mass to a higher position behind the topline in the higher-lofted clubs pulls the CG location up and encourages a lower flight. Titleist also makes the grooves in pitching and gap wedges deep and narrow, like an iron's groove because those clubs are often played with a full swing from the fairway or fairway rough. However, the grooves in the sand and lob wedges are wider and shallower to get water, sand and debris off the face more efficiently on shots hit around the green. The WedgeWorks Toe Stamp wedges are available in right hand only and come standard with True Temper Dynamic Gold S200 shafts and Titleist Universal 360 grips for $249 each. Golfers can purchase them at authorized Titleist pro shops and Customization options like additional stamping, paint fill colors, different shaft bands and grips are also available for additional charges.
Yahoo
04-03-2025
- Yahoo
Titleist Vokey WedgeWorks 44F Grind wedge
Gear: Titleist WedgeWorks 44F Grind Wedge Price: $225 with True Temper Dynamic Gold S200 shaft and Titleist Universal 360 grip. Specs: Cast 8620 carbon steel with 44 degrees of loft and 10 degrees of bounce. Who it's for: Golfers who want a premium pitching wedge to take the place of the pitch wedge that matches their iron set. What you should know: While Titleist has offered 46-degree pitching wedges in recent years, this is the first 44-degree Spin Milled wedge, making it an option for golfers who play strong-lofted irons but desire to use a true pitching wedge. The deep dive: WedgeWorks, the boutique arm of Titleist's Vokey Design wedge division, has released numerous limited-edition and special wedges over the last few seasons, like the A Grind lob wedge, V Grind lob wedge, K* lob wedge, A+ lob wedge, and L Grind lob wedge. While it may sound like hyperbole, the new 44F may be the most important wedge the company has created in decades. From a material and construction standpoint, there is nothing new about the WedgeWorks 44F, which is cast from soft 8620 carbon steel like other SM10 wedges and has individually inspected grooves. That's not the story here. Instead, it's the loft, 44 degrees, and what it could mean for golfers who play modern-lofted irons. Traditionally, Vokey pitching wedges have been made with 46 and 48 degrees of loft, and those clubs have been options for golfers who prefer to use a true pitching wedge instead of the pitching wedge that comes with their iron set, which in reality is like a 10-iron. However, as lofts have become stronger in most iron sets, even a 46-degree pitching wedge can be an awkward fit. For example, a Titleist T100 9-iron comes standard with 42 degrees of loft, and the pitching wedge is at 46 degrees, but the T150 9-iron is at 40 degrees, and the pitching wedge is at 44 degrees. The game-improvement T200 and T350 have 9-irons around 38 degrees and come with pitching wedges at 43. Removing a T150, T200, or T350 pitching wedge and adding a 46-degree SM10 can create a significant distance gap in a player's scoring clubs. The release of the WedgeWorks 44F gives players who use a better-player's distance iron or a game-improvement iron a choice that, from a gapping standpoint, makes sense. Yes, working with a custom fitter, players can have a 46-degree wedge bent to 44 degrees, but reducing loft also reduces a wedge's bounce, which can lead to digging and poor turf interaction. The WedgeWorks 44F is designed with 10 degrees of bounce, like its 46- and 48-degree counterparts, so it should maintain speed through the contact area while providing more distance. The F Grind is one of the most popular grinds with accomplished golfers because it is straight and features slight heel relief, making it very versatile and a smooth transition for most golfers from their weakest-lofted iron. Through the WedgeWorks program, golfers can have the 44F customized with up to 10 characters stamped into the back of the head or up to 15 characters around the toe, different paint fill colors, specialty grips, and a variety of shaft bands. This article originally appeared on Golfweek: Titleist Vokey WedgeWorks 44F Grind pitching wedge
USA Today
04-03-2025
- USA Today
Titleist Vokey WedgeWorks 44F Grind wedge
Titleist Vokey WedgeWorks 44F Grind wedge Designed to be an option for golfers who want a true pitching wedge, the 44F Grind fits loft and distance gaps for today's players. Gear: Titleist WedgeWorks 44F Grind Wedge Price: $225 with True Temper Dynamic Gold S200 shaft and Titleist Universal 360 grip. Specs: Cast 8620 carbon steel with 44 degrees of loft and 10 degrees of bounce. Who it's for: Golfers who want a premium pitching wedge to take the place of the pitch wedge that matches their iron set. What you should know: While Titleist has offered 46-degree pitching wedges in recent years, this is the first 44-degree Spin Milled wedge, making it an option for golfers who play strong-lofted irons but desire to use a true pitching wedge. The deep dive: WedgeWorks, the boutique arm of Titleist's Vokey Design wedge division, has released numerous limited-edition and special wedges over the last few seasons, like the A Grind lob wedge, V Grind lob wedge, K* lob wedge, A+ lob wedge, and L Grind lob wedge. While it may sound like hyperbole, the new 44F may be the most important wedge the company has created in decades. From a material and construction standpoint, there is nothing new about the WedgeWorks 44F, which is cast from soft 8620 carbon steel like other SM10 wedges and has individually inspected grooves. That's not the story here. Instead, it's the loft, 44 degrees, and what it could mean for golfers who play modern-lofted irons. Traditionally, Vokey pitching wedges have been made with 46 and 48 degrees of loft, and those clubs have been options for golfers who prefer to use a true pitching wedge instead of the pitching wedge that comes with their iron set, which in reality is like a 10-iron. However, as lofts have become stronger in most iron sets, even a 46-degree pitching wedge can be an awkward fit. For example, a Titleist T100 9-iron comes standard with 42 degrees of loft, and the pitching wedge is at 46 degrees, but the T150 9-iron is at 40 degrees, and the pitching wedge is at 44 degrees. The game-improvement T200 and T350 have 9-irons around 38 degrees and come with pitching wedges at 43. Removing a T150, T200, or T350 pitching wedge and adding a 46-degree SM10 can create a significant distance gap in a player's scoring clubs. The release of the WedgeWorks 44F gives players who use a better-player's distance iron or a game-improvement iron a choice that, from a gapping standpoint, makes sense. Yes, working with a custom fitter, players can have a 46-degree wedge bent to 44 degrees, but reducing loft also reduces a wedge's bounce, which can lead to digging and poor turf interaction. The WedgeWorks 44F is designed with 10 degrees of bounce, like its 46- and 48-degree counterparts, so it should maintain speed through the contact area while providing more distance. The F Grind is one of the most popular grinds with accomplished golfers because it is straight and features slight heel relief, making it very versatile and a smooth transition for most golfers from their weakest-lofted iron. Through the WedgeWorks program, golfers can have the 44F customized with up to 10 characters stamped into the back of the head or up to 15 characters around the toe, different paint fill colors, specialty grips, and a variety of shaft bands.
