Latest news with #XXIXMetalCorp
Associated Press
6 days ago
- Business
- Associated Press
XXIX Increases Opemiska's Copper Resource
Highlights: Toronto, Ontario--(Newsfile Corp. - June 3, 2025) - XXIX Metal Corp. (TSXV: XXIX) (OTCQB: QCCUF) (FSE: 5LW0) ('XXIX' or the 'Company') is pleased to announce an updated Mineral Resource Estimate (MRE) for its 100% owned Opemiska Project, in Quebec's Chapais-Chibougamau District. This new estimate marks an increase in total tonnage and contained metal within a shallower pit constrained resource, and within a reduced surface footprint. 'This resource update was designed to increase contained copper, lower the strip ratio, reduce the open-pit footprint, and apply conservative cost assumptions to support a realistic and robust Preliminary Economic Assessment (PEA) scenario,' said Guy Le Bel, CEO of XXIX. 'Thanks to our successful stockwork modeling and drilling at the Saddle Zone, we've optimized our resource model within a more compact pit shell. More importantly, what was once considered waste is now recognized as lower-grade mineralization, which meaningfully reduces the projected strip ratio, enhances the economic potential of the project and reinforces our commitment to present a socially acceptable project to our stakeholders.' This MRE marks a strategic shift toward improving project economics while maintaining conservative operational assumptions. The pit-constrained portion of the resource has increased by 12%, now captured within a shallower and more compact pit shell. This highlights the Company's commitment to delivering a high-quality PEA in the near term. Notably, the inclusion of lower-grade stockwork mineralization has significantly enhanced the overall resource profile, substantially reducing the anticipated strip ratio, and broadened the development pathways for Opemiska. [This table cannot be displayed. Please visit the source.] Figure 1: Opemiska 3D Resource Model and Constraining Pit Shell Figure 2: Plan View of Constraining Pit Shell Figure 3) Section Comparison of 2024 Resource Pit vs 2025 MRE Pit New Sources of In Pit Mineralization: Stockwork and Saddle Zone Stockwork In 2024, XXIX launched a stockwork study to evaluate the resource potential beyond Opemiska's known high-grade veins. The previous resource model primarily included these high-grade zones without fully accounting for the surrounding material. The study confirmed the resource potential of additional lower-grade mineralized stockwork and smaller veinlets outside the main veins, and at times, showed higher values than expected. This lower-grade mineralized stockwork has now been considered as part of Opemiska's resource estimate and is within the contemplated pit shell. Saddle Zone The Saddle Zone sits between the Springer and Perry zones at Opemiska. While previous resource models included high-grade veins from Springer and Perry, the Saddle Zone was not well understood and had limited data. In 2024, XXIX's technical team identified a new structural interpretation-suggesting mineralized veins dipping south, unlike other known veins. A three-hole scout drill program on the Saddle Zone intersected 5.3% copper and 1.20 g/t gold over 11 metres (core length) from a depth of 81 metres (see XXIX news release dated January 6, 2025 ). Encouraged by these strong results, XXIX followed up with a 15-hole drill program, outlining a 140-metres long structure, to a depth of 190 metres. The Company also defined another robust zone of mineralization extending over 80-metres at the intersection of two key northwest-trending structures (see XXIX news release dated May 22, 2025 ). High-Grade Starter Zone This updated MRE model includes a higher grade, near surface volume that will aim to optimize development scenarios as it allows for a potentially short payback period or a staged development scenario, which could result in a marked uplift in project economics. High-Quality PEA Coming Soon The updated MRE is a key step toward completing a high-quality, robust Preliminary Economic Assessment (PEA) for the Opemiska Project. The updated MRE preserves the high-grade veins which are expected to drive a strong early payback. This will be the first economic study on Opemiska since Falconbridge ended underground mining in 1991. The PEA will be designed to maximize the economic potential of high-grade tonnes as early as possible in a proposed mine plan to enhance project IRR. The Company continues to engage closely with local communities, whose support reflects a shared commitment to responsible development, local values, and economic opportunity. With the updated resource and strong community backing, XXIX is well positioned to advance toward a sound and compelling PEA. Additional Upside: More In Pit Stockwork Mineralization and Cooke Gold Project There is significant potential to add additional stockwork mineralization within the Opemiska property that could further increase Opemiska's resource base. The Company will continue to evaluate stockwork mineralization at the property given its importance and potential impact on any future economics. Additionally, the Company will look to evaluate potential at the Cooke gold project, 2.5km east of Opemiska's proposed open pit. The Cooke gold project historically produced 1.97 million tonnes grading 5.04 g/t gold, 0.66% copper 1. The Cooke gold project represents a past-producing underground operation with a high-grade crown pillar still intact. XXIX is evaluating the bulk mineable, open pit potential of the Cooke gold project, that could further boost Opemiska's future project economics. Out of Pit Resources The updated MRE also defines an underground resource including 6.9 million tonnes in the indicated category, at a 1.85% copper equivalent grade (243 million pounds of copper, 617 Koz of silver, and 64 Koz of gold), and 2.1 million tonnes in the inferred category, at a 0.88% copper equivalent grade (33 million pounds of copper, 82 Koz of silver, and 15 Koz of gold). This high-grade underground inventory underscores the long-term development potential of Opemiska beyond the open pit potential. With significant tonnage averaging 1.59% copper and 2.76 g/t silver in the Indicated category, this resource represents the legacy of Falconbridge's past-producing underground operations and provides optionality for future phases of development. Strategic Advantages of the Opemiska Project: Infrastructure, Accessibility, and Brownfield Setting The Opemiska Project benefits from a unique combination of strategic advantages that significantly enhance its development potential. These include ease of access, a brownfield environment, and existing infrastructure, all of which contribute to reduced development risk, lower capital requirements, and a more efficient project timeline. Support from Chapais Leadership XXIX and the City of Chapais implemented an official working group in 2024, to ensure the exploration and development of the Opemiska project within the city limits of Chapais are conducted according to he highest industry standards, and according to the values and expectations of Chapais citizens while maximizing economic benefits. Refer to the Company's July 24, 2024 news release for additional information. Ease of Access The Project is located immediately adjacent to the Town of Chapais, Quebec, with direct access via paved highways and year-round roads. Unlike remote or fly-in-only projects, Opemiska can support continuous operations in all seasons in an urban environment, reducing logistical complexity and cost. Brownfield Environment Opemiska is a past-producing copper-gold mine with a long history of underground production by Falconbridge from 1953 to 1991. This brownfield setting offers a well-understood geologic model, a substantial historical database, and a significantly de-risked exploration and development profile. The use of previously disturbed ground may also streamline the permitting process. Existing Infrastructure The Project is connected to Quebec's hydroelectric power grid, providing access to clean, low-cost, and reliable power. Additional infrastructure advantages include proximity to rail, airport, and local service centers. The availability of a local workforce and accommodations further reduces the need for costly remote infrastructure, such as fly-in camps. Taken together, these advantages position Opemiska as a lower-cost, lower-risk development project with a clear path toward a high-quality Preliminary Economic Assessment and long-term value creation. Reasonable Prospects for Eventual Economic Extraction A Mineral Resource is a concentration of solid material of economic interest near the surface of the Earth in such form, grade or quality and quantity that there are reasonable prospects for eventual economic extraction (RPEEE). To satisfy the requirement of RPEEE by open pit mining, a reporting pit shell was determined based on conceptual parameters and costs (Table 2). Copper and gold recovery will be achieved using conventional crushing, grinding, gravity, and flotation to produce a copper concentrate that could be shipped to a smelter for processing. Outstanding Risk Factors The XXIX technical team has identified several key risks that could impact the development of the Opemiska Project. These are being carefully evaluated and will be addressed in future engineering and economic studies: These risk factors will be fully detailed in the upcoming PEA and other Technical Reports and are being integrated into the ongoing development strategy. About XXIX Metal Corp. XXIX is advancing its Opemiska and Thierry Copper projects, two significant Canadian copper assets. The Opemiska Project, one of Canada's highest-grade open pitable copper deposits, spans 21,333 hectares in Quebec's Chapais-Chibougamau region, with strong infrastructure and nearby access to the Horne Smelter. A June 2025 resource update reported a pit constrained resource of 62.7 million tonnes at 1.04% CuEq (Indicated) and 78.4 million tonnes at 0.41% CuEq (Inferred). The Thierry Project hosts two past-producing open pits that transitioned to underground mining. Historically, copper concentrate was shipped to the Horne Smelter in Rouyn-Noranda, QC. Significant infrastructure is already in place, with the Thierry property being accessible via all-season road, an airport within 5km, a provincial power grid within 8km, and nearby rail. With these two high-potential projects, the Company has solidified its position as a key player in the Canadian copper sector and has established itself as one of Eastern Canada's largest copper developer. QP Statement The technical information contained in this news release has been reviewed and approved by Denis McNichols, and géo., Vice President Exploration for XXIX Metal, a Qualified Person, as defined in 'National Instrument 43-101, Standards of Disclosure for Mineral Projects. The independent qualified persons for the MRE, as defined by National Instrument ('NI') 43-101 guidelines, is Pierre-Luc Richard, of PLR Resources Inc. with contributions from Stephen Coates, of Evomine for value cut-off, open pit and and optimization solids, and Christian Laroche, from Synectiq, for metallurgical parameters. QAQC Statement All drilling performed by XXIX was done mainly using NQ sized drill rods and were stabilized to minimize deviations. When old open or backfilled stopes were expected to be intersected in drilling the holes, they were started in NQ and telescoped to BQ after the stope, or started in HQ and reduced to NQ and then BQ, when a second stope was encountered to ensure completion of the drill hole. All drill core is stored in Chapais under constant video surveillance. All pulps and mineralized rejects have been preserved. For the exploration undertaken by XXIX, all assay batches are accompanied by rigorous Quality Assurance procedures, including the insertion of certified reference materials and blanks and duplicate verification assays in a secondary laboratory. Quality Control results, including the laboratory's control samples, are evaluated immediately upon reception of batch results and corrections are implemented immediately if necessary. All drill collars since 2019 were positioned in UTM coordinates and post-drilling surveyed using differential GPS instrumentation. The historical mine drill holes were surveyed on surface and underground at the time of drilling by mine personnel using conventional surveying methods. The drill hole collars for 2019 were oriented by compass but since 2021 accurate non-magnetic orientation of collars was achieved using the gyroscopic Azimuth Aligner by Minnovare. Downhole deviation surveys were done initially with Flex-it instrument by Reflex instrument at 30m intervals and from 2021 with the Champ Gyro instrument manufactured by Axis Mining Technology. All erroneous azimuths caused by excessive magnetism or other causes were purged from the database. A systematic bulk density measurement program using the water displacement method was implemented to measure the bulk density of all rock types. A total of 1,178 bulk density measurements were done since the start of drilling in 2019 drilling program. Parameters and Criteria Used for Mineral Resource Estimate (MRE) Table 2: General pit and stope optimization parameters used for the Mineral Resource Estimate include: Cautionary Statement Regarding Copper Equivalent Grades Copper Equivalent grades are expressed for purposes of simplicity and are calculated taking into account 1) metal grades; 2) long-term metal prices of: US$4.25/lb copper, US$2,500/oz gold and US$27.00/oz silver; 3) recoveries were calculated using a recovery modelled developed for the Opemiska project and were estimated at 95.0% for copper, 88.0% for gold and 86.0% for silver; 4) net smelter return value of metals as percentage of long-term metal prices, estimated at 89.2%, 95.8% and 88.3% for Cu, Au and Ag respectively. 5) The equation used to calculate CuEq % equals Cu % + 0.8531 Au g/t + 0.0083 Ag g/t. Cautionary Statement Regarding Mineral Resources The mineral resources disclosed in this press release conform to NI43-101 standards and guidelines and were prepared by independent qualified persons. The above-mentioned mineral resources are not mineral reserves as they do not have demonstrated economic viability. The quantity and grade of the reported Inferred Mineral Resources are conceptual in nature and are estimated based on limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological grade and/or quality of continuity. An Inferred Mineral Resource has a lower level of confidence relative to a Measured or Indicated Mineral Resource and constitutes an insufficient level of confidence to allow conversion to a Mineral Reserve. It is reasonably expected, but not guaranteed, that the majority of Inferred Mineral Resources could be upgraded to Measured or Indicated Mineral Resources with additional drilling. The National Instrument 43-101 Technical Report, including the mineral resources for the Opemiska Project contained in this news release, will be delivered and filed on SEDAR by XXIX within 45 days of the date of this news release. For further information, please contact: Guy Le Bel, Chief Executive Officer Phone: 514.654.8550 Email: [email protected] Forward Looking Statements This news release contains certain forward-looking statements, including statements about the Company's belief that Opemiska has potential for continued growth, any anticipated timelines for the completion of a Preliminary Economic Assessment at Opemiska, various cost, price and production assumptions used to inform the Mineral Resource Estimate cut-off grade, and outstanding risk factors, including Opemiska's Proximity to the Town of Chapais, Historical Assay validation, Geotechnical considerations of open stopes in the eastern pit wall, the Venture sill, the Gwillim fault, host rock competency and Historical Stope Modeling. Wherever possible, words such as 'may', 'will', 'should', 'could', 'expect', 'plan', 'intend', 'anticipate', 'believe', 'estimate', 'predict' or 'potential' or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management's current beliefs and are based on information currently available to management as at the date hereof. Forward-looking statements involve significant risk, uncertainties and assumptions. Many factors could cause actual results, performance or achievements to differ materially from the results discussed or implied in the forward-looking statements. Such factors include, among other things: risks related to uncertainties inherent in drill results and the estimation of mineral resources; and risks associated with executing the Company's plans and intentions. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, the Company cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and the Company assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law. Neither TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this release. ________________________ 1 Morin, R. DV90-01, Energie et Ressources Naturelle Québec, Edition L. Blais-Leroux, p. 75 To view the source version of this press release, please visit
Yahoo
22-05-2025
- Business
- Yahoo
XXIX Defines New Area of Economic Potential at Saddle Zone
Highlights: XXIX defines robust cylindrical body of mineralization extending over 80 metres at Saddle zone. Notable intersections including 1.21% CuEq over 9.9 metres; 0.62% CuEq over 12.0 metres. Will deepen the existing pit shell in the Saddle Zone area. Mineralization is continuous across 140 metres of strike length and reaching up to 190 metres in vertical depth. Updated Mineral Resource Estimate for Opemiska is expected to be published soon. Toronto, Ontario--(Newsfile Corp. - May 22, 2025) - XXIX Metal Corp. (TSXV: XXIX) (OTCQB: QCCUF) (FSE: 5LW0) ("XXIX" or the "Company") is pleased to announce that it has identified a new area of resource potential within the Saddle Zone at its Opemiska Copper Project, located in Quebec. The latest drill program has outlined the newly interpreted Saddle Zone, which spans approximately 140 metres in strike length and up to 190 metres in vertical extent. Saddle Mineralization The Saddle Zone's primary area of interest represents a robust cylindrical body of mineralization extending over 80 metres at the intersection of the two northwest-trending late-stage structures. This zone has the potential to deepen the existing inferred pit shell in the Saddle Zone area. This new zone will be evaluated for inclusion in XXIX's forthcoming updated resource estimate. Geometry and Continuity Drilling confirms the continuity of mineralization across 140 metres of strike length and up to 190 metres in vertical depth. Grades and thicknesses are strongest at the western end of the zone and increase at depth Structural Interpretation The Saddle Zone is interpreted to be displaced and duplicated by two northwest-trending late-stage faults (Saddle 1 and Saddle 2 faults), creating two parallel mineralized zones on either side of the faults. "The presence of this large, well-mineralized cylindrical body offers the potential for near-term resource growth and a broader, deeper pit shell in the Saddle zone. This is exactly the type of upside we were hoping for as we continue to define the Saddle Zone," said Guy Le Bel, CEO of XXIX Metal Corp. Table 1 - Highlighted Drill Intercepts in the Saddle Zone (Selected results showing grade, width, and depth distribution) Hole From Length (m) CuEq % Cu % Au g/t OPM-25-283 120.8 9.9 1.21 1.18 0.046 OPM-25-285 165.0 12.0 0.62 0.60 0.034 OPM-25-286 147.0 3.5 0.36 0.35 0.023 OPM-25-287 186.0 25.5 0.36 0.35 0.02 OPM-25-288 172.5 1.5 0.21 0.20 0.021 OPM-25-290 60.0 9.0 0.22 0.20 0.035 OPM-25-291 46.5 3.0 0.39 0.37 0.039 OPM-25-292 31.5 3.0 0.44 0.35 0.161 Table 2 - Supplementary Intercepts in Saddle 1 and Saddle 2 Fault Zones (Confirms structural complexity and supports new geological model) Hole From Length (m) CuEq % Cu % Au g/t OPM-25-284 108.0 21.0 0.72 0.66 0.1 Including 108.0 7.0 0.53 0.43 0.166 and 124.1 4.9 2.23 2.13 0.174 OPM-25-293 19.5 45.0 1.17 0.99 0.308 and 70.5 7.5 0.49 0.47 0.036 OPM-25-294 23.7 57.3 0.95 0.87 0.139 Including 23.7 30.3 1.93 1.64 0.498 and 69.0 12.0 0.50 0.41 0.147 OPM-25-295 57.9 0.5 0.70 0.53 0.301 Holes OPM-25-293 and OPM-25-294 (reported in NR date of April 10) display two distinct mineralized intervals, consistent with XXIX's structural interpretation of the fault-related displacement model. These twin zones significantly increase overall mineralized widths and suggest further potential at depth. Hole OPM-25-295, located north of the Saddle Zone, intercepted anomalous gold values-an indicator often associated with the late northwest faults. Next Steps XXIX will continue to refine the geological model of the Saddle Zone in preparation for Opemiska's resource update. Further drilling is planned to confirm the down-dip continuity and lateral extent of the Saddle zone and its potential contribution to Opemiska's economics. About XXIX Metal Corp. XXIX is advancing its Opemiska and Thierry Copper projects, two significant Canadian copper assets. The Opemiska Project, Canada's highest-grade copper resource, spans 21,333 hectares in Quebec's Chapais-Chibougamau region, with strong infrastructure and nearby access to the Horne Smelter. The Thierry Project hosts two past-producing open pits that transitioned to underground mining-producing 5.8Mt @ 1.13% Cu, 0.14% Ni between 1976 - 1982 by UMEX Inc. (see QC Copper news release of 1 October, 2024; see note below regarding historical mineral resources estimates). Infrastructure at Thierry include all-season road, an airport within 5km, a provincial power grid within 8km, and nearby rail. With these two high-potential projects, the Company has solidified its position as a key player in the Canadian copper sector and has established itself as one of Eastern Canada's largest copper developer. QP Statement The technical information contained in this news release has been reviewed and approved by Denis McNichols, and géo., Vice President Exploration for XXIX Metal Corp., a Qualified Person, as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects. For further information, please contact: Guy Le Bel, Chief Executive OfficerPhone: 514.654.8550 Email: glebel@ Forward-Looking Statements This news release contains certain forward-looking information. All statements included herein, other than statements of historical fact, are forward-looking information and such information involves various risks and uncertainties. In particular, this news release contains forward-looking information in relation to: the timing and anticipated receipt of required regulatory (including TSXV) and other third-party approvals for the Transaction and the Option Transfer; the ability of XXIX to satisfy the other conditions to, and to complete, the Transaction; and the anticipated timing of the closing of the Transaction. There can be no assurance that such information will prove to be accurate, and actual results and future events could differ materially from those anticipated in such information. This forward-looking information reflects the Company's current beliefs and is based on information currently available to the Company and on assumptions the Company believes are reasonable. These assumptions include, but are not limited to: the current share price of the share of the Company; TSXV acceptance and market acceptance of the Transaction and the Option Transfer; the Company's current and initial understanding and analysis of its projects; the Company's general and administrative costs remaining constant; market acceptance of the Company's business model, goals and approach; and the feasibility and reasonableness of conducting exploration on and developing any of the Company's projects. Forward-looking information is subject to known and unknown risks, uncertainties and other factors which may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: there is no certainty that work programs will result in significant or successful exploration and development of the Company's properties; uncertainty as to the actual results of exploration and development or operational activities; uncertainty as to the availability and terms of future financing on acceptable terms; uncertainty as to timely availability of permits and other governmental approvals; the Company may not be able to comply with its ongoing obligations regarding its properties; the early stage development of the Company and its projects; general business, economic, competitive, political and social uncertainties; capital market conditions and market prices for securities, junior market securities and mining exploration company securities; commodity prices; the actual results of current exploration and development or operational activities; competition; changes in project parameters as plans continue to be refined; accidents and other risks inherent in the mining industry; lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation or income tax legislation, affecting the Company; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. A description of additional risk factors which may cause actual results to differ materially from forward-looking information can be found in the Company's disclosure documents on the SEDAR+ website at Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. The Company does not undertake to update any forward-looking information except in accordance with applicable securities laws. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. To view the source version of this press release, please visit
