
These Are the Best Weeding Tools, From Roundup to Flame Thrower
The lot is oriented northeast-southwest, so some areas receive full sun all day and some areas get shade in the morning or afternoon. And, thanks to three huge walnut trees, some areas are dark and dank for the entirety of the growing season. Whatever conditions a plant prefers, it can find them here.
The yard has not been tended in a long time, and 'volunteers' (gardener-speak for stuff you didn't plant and may not want) have taken hold. When the weather turns warm in the spring, whole sections of it sprout monocultures of creeping Charlie and purple dead nettle. The fences disappear behind walls of English ivy. Bumper crops of Asiatic dayflower and Asiatic smartweed grow in the raised beds. Broadleaf plantains and common dandelions march across the grassy sections like spear bearers. All of these things are non-native, and some of them are invasive (that means they're non-native and also harmful, crowding out native plants or otherwise disrupting ecosystems). This poison ivy vine was about 2 inches across and had climbed 30 feet up a tree. I treated it once with Roundup Weed & Grass Killer, and it never came back. Tim Heffernan/NYT Wirecutter
Getting rid of them piecemeal would be the work of a lifetime, which is why I'm planning to kill everything and start over. My short-term goal was to get the worst of the weeds under control, make the property less of an eyesore, and maybe even make the yard pleasant to hang out in.
State-school agricultural extensions proved to be a goldmine of advice. And I would encourage you to explore yours: It may identify locally problematic species or raise other concerns specific to where you live. In addition, I found North Carolina State University Extension's article Are There Alternatives to Glyphosate for Weed Control in Landscapes? to be a gem of clarity and concision. And it's a great general-purpose primer on glyphosate (which you may know as Roundup), other herbicides, non-herbicidal control methods, and the plants and situations they're most effective at addressing. The article A Guide to Weed Life Cycles, from UMass Amherst's Extension Turf Program, is also terrific, and it explains how to identify the different classes of weeds and why managing them requires different approaches.
Then I gathered some equipment. I already had a transplanting spade (even before I wrote our guide to them), and I don't think there's a better tool for uprooting shrubs and trees. I also had our top-pick string trimmer and a hori-hori (a digging knife with a dozen uses, including weed removal). To these I added a couple of weed-pulling tools: a propane blowtorch; the first gallon of Roundup I've ever bought (as fraught a moment as ordering my first legal-age beer); and several herbicides that fall under the Environmental Protection Agency's 25(b) 'minimum risk' exemption from FIFRA registration. I added a spray bottle for general Roundup application and a couple of small applicators for daubing it on freshly cut stumps.
They mostly proved effective at the different jobs for which they're intended, and this provided my first take-away: You'll get the best results if you keep multiple weed-fighting tools on hand.
Connie Park/NYT Wirecutter
The trademarked name Roundup is often used interchangeably with glyphosate, a powerful and controversial herbicide that Monsanto patented and began selling under the Roundup name in 1974. (Monsanto's exclusive right to sell glyphosate in the US expired in 2000, and then many other companies began using it in their formulas.) But as of 2024, no Roundup residential lawn-and-garden products contain glyphosate, including the basic Weed & Grass Killer that I used.
This basic herbicide rapidly kills most plants, and it degrades quickly, allowing replanting within days or weeks.
Roundup Weed & Grass Killer now contains three active ingredients. Triclopyr triethylamine salt (TEA) is what's called a systemic herbicide. Herbicides of this type get absorbed by the plants they're used on and spread to all of the plants' tissues, killing them down to the roots. TEA is also what's called a selective herbicide, which means it's most effective on certain kinds of plants — in TEA's case, woody plants and vines. It's applied to cut stumps to prevent regrowth (and it's frequently used to combat invasive species).
TEA specifically works by mimicking an auxin, a plant growth hormone, triggering uncontrolled growth that kills treated plants within days or weeks. The EPA considers TEA slightly toxic to humans, not classifiable as a human carcinogen, practically nontoxic to slightly toxic to birds and marine/estuarine invertebrates, and practically nontoxic to fish and freshwater invertebrates. It is degraded by soil microbes within a few weeks.
Fluazifop-p-butyl is a selective, systemic herbicide that's used mainly to kill grasses, and it's not effective on broad-leaved plants. It works by inhibiting lipid (fat and oil) synthesis, and that leads to the breakdown of cell membranes. The EPA considers it of low acute toxicity and unlikely to be carcinogenic to humans. It is degraded by microbes in the soil, and it does not travel well through soil, though the EPA notes that using both fluazifop-p-butyl and triclopyr 'in areas where soil is permeable, particularly where the water table is shallow, may result in groundwater contamination.' Like TEA, fluazifop-p-butyl is frequently used to combat invasives.
Diquat dibromide kills by disrupting plants' cell membranes. It's non-systemic, which means it kills only the parts of a plant that it touches. And it's non-selective, which means it's effective on almost all plant types. The EPA considers it non-carcinogenic, of low oral toxicity, and of moderate to severe acute dermal toxicity to humans. It does not migrate through soil, and it's unlikely to get into surface and groundwater.
Taken together, this mixture makes the Weed & Grass Killer a broadly effective herbicide in yards and gardens, and one that's quite safe to use and does not persist in the environment. (This allows for replanting of treated areas in as little as a day.)
Still, I have qualms about using pesticides in general, and when I do, I make an effort to use as little as possible.
In spring 2025, I tried three herbicides — from Sunday and Procter & Gamble — that are heavily marketed as being safer or greener alternatives to traditional formulas. Before using them in my yard, I spoke at length with Trent Lewis, Sunday's co-founder and head of R&D, and Mary Jane Watson, research and development senior scientist at Procter & Gamble.
Sunday's Dandelion Doom uses chelated iron (iron HEDTA) to induce fatal iron toxicity in broad-leaved plants. Iron HEDTA is used extensively as a supplemental fertilizer (all photosynthetic plants need some iron), and using it as an herbicide is effectively a matter of vastly over-fertilizing. The EPA has found no reports of adverse effects from exposure to iron HEDTA, and it says that 'pesticidal usage of this biochemical will not have any harmful environmental effects.'
Sunday's Weed Warrior is an ammoniated soap. Herbicidal soaps kill by disrupting the protective waxy coating on leaves and damaging leaf-cell walls; this leads to desiccation and cell death. I reviewed the Safety Data Sheets of several widely available brands, including Weed Warrior, and the warnings are that they can irritate the eyes, skin, or lungs and should not be swallowed; these warnings are similar to the warnings on dishwashing soap.
Procter & Gamble's Spruce meets the EPA's 25(b) 'minimum risk' conditions. Essentially, this means a pesticide can contain only active ingredients that the EPA believes 'pose little to no risk to human health or the environment,' and in fact many of those ingredients are widely used in food and cosmetic products. Spruce's active ingredients are sodium lauryl sulfate (a surfactant found in a lot of soaps and shampoos), geraniol (geranium essential oil), and cornmint oil. Putting aside all other considerations, it smells delicious. (That wasn't a given. The complete list of 25(b) active ingredients includes dried blood and 'putrescent whole egg solids.')
I didn't find any of them as effective as the Roundup. Neither did Wirecutter's Sebastian Compagnucci, an avid gardener who optimizes his weeding practices.
This was largely expected: They are not systemic herbicides, which are absorbed into and kill every part of a plant. As both Lewis and Watson noted, that means treated plants' roots can and often do survive and regrow.
It typically took two applications of the Sunday and Spruce products to kill the aboveground parts of the grasses, dandelions, and other weeds I used them on. Also, for the products to be the most effective, the plants have to be thoroughly drenched — not just lightly sprayed or wetted with a drop or two. So I wound up using a lot more of the Sunday and Spruce products than I did of the Roundup.
Spruce comes in proprietary aerosol cans (they spray straight down), manual spray bottles, and jugs with built-in, battery-powered spray wands. Sunday's Weed Warrior and Dandelion Doom come in manual spray bottles and in jugs and pouches with battery-powered wands. Sunday sells refills for all of them, so you can reuse the original containers. But those wands aren't built to last, and the batteries will die. Spruce sells refills for its jugs and spray bottles but not for the aerosol cans, and its battery-powered wands aren't built to last, either. The incongruity between these 'earth-friendly' herbicides and all of that material waste struck both Seb and me.
All told, I'm happier using tiny, targeted amounts of the Roundup Weed & Grass Killer and durable applicators of my own choosing. And I don't plan to keep using Sunday or Spruce after the batches we ordered run out. But I absolutely acknowledge their virtues, too.
Connie Park/NYT Wirecutter
If you've watched more than a couple of YouTube videos about gardening, I suspect you've gotten ads for Grampa's Weeder. It's pitched as an Olde Tyme secret weapon against unwanted grasses and broad-leaved lawn invaders like dandelions.
Given my target-rich environment, I had to try it out. I also tried a similar tool made by Fiskars.
This simple tool is an ace at pulling up deep-rooted lawn weeds like dandelions, but it's ineffective on other intruders and in rocky soil.
On my dandelions and plantains, Grampa's Weeder and the Fiskars tool both performed as advertised, usually managing to pull out most of the taproots along with the foliage and thus killing the individual plant. (If you don't remove the taproots, a plant will just grow back.) Both the Grampa's Weeder and the Fiskars (shown) are adept at pulling out dandelions, taproots and all. Tim Heffernan/NYT Wirecutter
Conveniently, you don't have to lean down or get on your knees to use either tool, the way you do with a traditional hand weeder. (You do have to use your foot to push them into the soil, however.) And they don't leave big holes in the lawn, the way a shovel or trowel can.
That said, they are one-trick ponies. Neither worked well on the little walnut sprouts, for example, because the flexible but tough stems prevented the tools' claws from centering on and gripping the roots. They're useless in rocky soil, too, because the claws can't penetrate.
I kept the Grampa's Weeder. It lacks the little ejector mechanism of the Fiskars weed puller, but I didn't find that to be much of a time-saver anyway. The simple bamboo-and-metal construction is sturdy, and it's comfortable to hold. And, above all, it's nearly silent. Using it became meditative after a while. The Fiskars weed puller, whose plastic parts never ceased clicking and clacking while I worked, became increasingly irritating to use. I think I'd find excuses to not use it, and that's how weeds take over.
Connie Park/NYT Wirecutter
Let's get one thing out of the way first: Flame weeding is not flamethrowing. Banish visions of Rambo torching the jungle from your mind.
Using targeted heat to kill weeds, though, is an established practice. Steam and hot-foam equipment is used by some professionals, but for homeowners, propane torches are the way to go.
For obvious reasons, they can't be used everywhere. They're intended for flame-resistant surfaces like concrete, asphalt, rock, and gravel — places where weeding by hand is difficult or impossible. The University of California's Agricultural and Natural Resources department has some additional guidelines on flame weeding safety, including advice on keeping extinguishing materials nearby and avoiding use in windy, dry, high fire-risk conditions.
I tested a popular torch made by Bernzomatic. It hooks up to a standard 16-ounce propane cylinder (available for about $10 at any hardware or outdoors store), so it's light enough to carry in one hand. It has a built-in manual igniter, and its long flame tube lets you stand upright while working.
This torch is lightweight, self-igniting, and long enough to use standing upright. It's a good (and satisfying) tool for controlling weeds on nonflammable surfaces.
The test area consisted of gravel-choked sidewalk cracks, which the dandelions and plantains consider an excellent place to raise children.
The Bernzomatic torch was easy to set up and made quick work of the weeding. After sweeping away any dead leaves and dry grass clippings with a push broom (to avoid unwanted flareups), I simply held the flame over each plant for a second or two — just long enough to make the foliage change to a slightly darker green. This indicates that the plant tissue has been heated enough to kill it; there's no need to burn the weeds to ashes. Seared to perfection. This picture was taken about 18 hours after I torched a strip of the driveway, but the plants actually withered within a few hours of being treated. Tim Heffernan/NYT Wirecutter
One thing to note: Torches destroy only above-ground foliage. That's usually enough to kill young weeds outright, per the North Carolina State Extension's guide to glyphosate alternatives, but you usually have to go back and hit mature plants again. Drawing on energy stored in their roots, they can come back several times before their reserves are used up.
Like weed pullers, weed torches are essentially one-trick ponies. You should not use them on lawns or in brush (a fire danger), and the flame isn't precise enough to target individual weeds within a crowded garden bed. With care, they can be used in open beds, but if the beds are mulched, make sure that the mulch is properly soaked before you light up.
However, people do use weed torches for a few non-gardening purposes, like igniting brush piles and melting ice on sidewalks. There are more efficient ways to do both, but there's something to be said for the fun of wielding the awesome power of fire in your very own hands.
None of the above options are ideal for use in vegetable gardens and flowerbeds. And Roundup should never be used anywhere you'll be planting food crops — not even to kill weeds beforehand. Try a stirrup hoe instead. Wirecutter's Sebastian Compagnucci got his stirrup hoe during the pandemic, when his garden became a refuge, and due to this tool's precise, efficient action, his weeding time was cut in half.
For uprooting unwanted shrubs and small trees, I've never found a better tool than a transplanting spade. As the name suggests, this tool is also ideal for transplanting (or simply planting) things. And due to its short handles, a transplanting spade is much more maneuverable in the confines of a yard than a standard shovel.
A hori-hori is one of our favorite gardening tools. Shaped like a short sword but dished like a trowel, it's great for digging out deep-rooted weeds that are growing close to plants you want to keep. In my raised beds, I found my hori-hori more effective than the weed pullers, which tended to sink into the soft soil and didn't get enough leverage to work properly.
A string trimmer can keep weeds knocked down, and it can give desirable plants time to grow and eventually crowd out the weeds for good. I also use mine as a makeshift edger.
All this said, now that I've gotten our weed situation under a modicum of control, I find myself frequently turning to the simplest tool of all: my own hands. It really doesn't take long to yank the weeds out of a patch of lawn or the corner of a raised bed. And this approach somehow seems more fair. The plants we call weeds are some of the great survivors and settlers of the living world. The least I can do is give them an honest fight.
This article was edited by Jen Gushue and Harry Sawyers.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
16 hours ago
- Yahoo
Eight World War One pillboxes are Grade II listed
A rare semi-circular bunker-like structure is among eight World War One pillboxes in Norfolk that have been granted Grade II listed status. The concrete buildings were built in Norfolk between 1916 and 1918, designed to protect a stretch of English coast from a potential German sea invasion, including the semi-circular one at Bacton Wood. They still have their original steel doors, gun loop shutters and white-painted interiors, according to Historic England. Its East of England regional director Tony Calladine said they were "a reminder of a time when determined communities prepared to defend Britain during the Great War". Listed buildings are buildings of special architectural or historic interest with legal protection. All but one of the newly-listed pillboxes are in the North Walsham area and they are: Two defending the Common Road and Bradfield Beck crossing point at Bradfield Common A rare semi-circular pillbox at Bacton Wood, guarding a canal bridge Two circular pillboxes at White Horse Common at the Edbridge Mill crossing Two either side of Bacton Road, Little London, defending the canal bridge The final pillbox is another circular one at Wayford Bridge, near Stalham. The pillboxes were positioned along the River Ant and the North Walsham & Dilham Canal - waterways that could provided further defence in The Broads. They are all slightly inland and were part of a network of pillboxes which were designed to "provide a barrier to invading enemy troops", said Mr Calladine. Pillboxes were generally camouflaged against the landscape to hide the occupants from enemy view. Most were installed with small holes in the walls called loopholes where weapons could be fired from. The first pillboxes were built by the German army on the Western Front, but as the threat of invasion increased in Britain, they began appearing along the east coast of. "The listing of these pillboxes recognises their historic significance and exceptional durability," Mr Calladine added. Historic England hopes people will add their photographs and drawings of the pillboxes and share their stories to its Missing Pieces Project. Follow Norfolk news on BBC Sounds, Facebook, Instagram and X. More on this story D-Day training pillbox converted into home for bats Former helter-skelter among new listed buildings Storms unearth sand-filled World War Two pillbox World War Two defences emerge from UK beach Related internet links Historic England
Yahoo
17 hours ago
- Yahoo
The Sneaky Way Your Freezer Is Ruining Your Drink
Ice absorbs the flavors and smells around it, which might explain the garlic notes in your Old Takeaways Ice is highly porous and absorbs nearby odors, so stash cubes in resealable bags and keep any uncovered or strongly scented foods out of the freezer to prevent off-flavors in cocktails. Replace stored ice every couple of weeks, and wash trays with mild dish soap, water, and a splash of lemon juice — harsh cleaners like bleach or ammonia can linger and make cubes unsafe. Ice trays can make the ice taste stale over time, but can be revitalized by placing the empty trays in the oven at 250–350°F to bake off lingering odors — don't worry, the trays won't melt or menu promised an Old Fashioned variation composed of high-end rye whiskey, a housemade syrup of seasonal berries, fine Italian amaro, and at least three other aromatic and fruity ingredients. It was sure to be a layered explosion of flavors that would dilute slowly over a large, crystal-clear cube in a rocks glass. None of the ingredients listed above was garlic bread. Unfortunately, the drink tasted like it. No, it wasn't prepared with a cool, savory gin or bespoke pizza bitters. The culprit was improperly stored ice. Ice is, after all, frozen water. It's a malleable canvas that can form all sorts of marvelous shapes and elegant, clear cubes. Yet, no matter how artful the display, the porous nature of water means that ice can take on surrounding odors and flavors. How to properly store ice 'Ice readily absorbs smells not only from your freezer, but sometimes from your refrigerator as well,' says drinks historian and ice expert Camper English, author of The Ice Book: Cool Cubes, Clear Spheres, and Other Chill Cocktail Crafts. 'One garlicky Old Fashioned changed how I store ice forever.' He recommends storing ice in resealable plastic bags and refreshing it if it sits for a couple of weeks. However, a layer of plastic is often not enough. Sometimes the call is coming from inside the house. 'I no longer keep food in my fridge that isn't well-sealed, like Chinese take-out boxes and pizza boxes, as I noticed it made my ice funky after a single night,' says English. 'If you want to do an experiment to show how porous ice is, freeze a container of it and then add a drop of food coloring on top. The food coloring seeps down the ice in unexpected zigzag patterns rather than uniformly.'"'Ice readily absorbs smells not only from your freezer, but sometimes from your refrigerator as well.'" Camper EnglishThough it's not practical for most to possess a designated ice freezer, many venues are moving toward using smaller coolers specifically for ice. Geoff Smith, head bartender at Birch Hill Tavern in Glastonbury, Connecticut (a team member playfully refers to him as 'the Ice Jedi of New England'), says that the only food they store with the ice for drinks is bread. They switched to stackables in recent years. 'Every freezer has its own microclimate,' he says. In addition, ice should never be frozen in a tray or other vessel that's been treated with harsh cleaning agents, bleaches, or ammonia. The ice can pick up lingering detergent aromas and be unsafe for consumption. Smith says he uses a mix of mild dishwashing liquid with lemon juice and water, sometimes with a little unflavored vodka added to eliminate any unwanted fragrance. 'Regular maintenance and cleaning of the filters is really important for using freezers,' says Lynnette Marrero, founder of Milly's Neighborhood Bar in Brooklyn, New York. She's the co-author of A Quick Drink: The Speed Rack Guide to Winning Cocktails for Every Mood, written with Speed Rack partner Ivy Mix, who discusses using a 'very inexpensive' ice freezer at her Brooklyn bar, Whoopsie Daisy, to keep cubes fresh. 'At Milly's, we are using a ghost cube system,' says Marrero. 'It is hard because you need air to flow on the top in order to get the proper freeze. However, I do put a light layer of Saran Wrap on top of the system and store it further away from everything else.' Choosing an ice tray and dirty ice hacks English says that while flexible trays are preferable, they can also pick up errant influences from a freezer's environment over time. 'Silicone ice cube trays also absorb odors from the freezer and fridge, so they can be a problem, too,' he says. 'After your ice is frozen in trays, pop it out and store it in a container [such as resealable plastic bags], and store the silicone molds outside of the freezer, where they won't pick up freezer smells.' The trays can still make the ice taste stale over time, but the smells can be baked out of them. Several references recommend placing them in an oven preheated to 250–350°F (120–175°C) for 20 minutes to an hour. Worry not: they don't melt or burn. How ice shape affects the taste The shape of the ice is also influences the overall sipping experience. Larger, slower-melting cubes ensure even dilution for stirred, spirit-forward cocktails, or a refined single spirit like whiskey or tequila. Neutral-tasting, smaller ice should be used for everything else. 'Our Hemingway Daiquiri needs shaved ice to keep it cold and bright,' says Steven Huddleston, bartender at STIR in Chattanooga, Tennessee, where the ice is tailored for every drink by hand. 'By producing crystal-clear blocks in-house and carving each piece to match the drink, we ensure every cocktail is served exactly the way it was intended.' If that sounds too complicated, premium ice suppliers like Twin Lakes Ice Co. in Hudson, New York, offer a solution. Founded by Abby Puca and Sean Meagher, the company caters to the growing demand for pristine, slow-melting cubes that elevate drinks like Old Fashioneds. 'One large cube with absolute clarity and no air bubbles, striations, or impurities, along with less surface area on the ice, will allow that cocktail to mature and gain water content throughout the whole experience,' says Meagher, adding that shaken cocktails deserve the same respect. 'If you shake that cocktail with a single, clear shaking cube, you can achieve a much colder, aerated cocktail than if you were to shake with 10 or so cold draft cubes [as done in many bars and restaurants]. You can shake longer without having to worry about adding too much water content, thus resulting in an overall colder cocktail.' Remember, no matter how perfectly a cube cools a cocktail, or how inviting it looks in the drink, how it was frozen and stored makes all the difference. It may melt away, but it can still remind you of that takeout container that you forgot to toss. Read the original article on Food & Wine Solve the daily Crossword


New York Times
a day ago
- New York Times
Our Favorite Bean Bag Chairs for Adults (That Kids Will Love Too)
I'm a writer who covers home and decor. When I'm not poring over specs or wielding a screwdriver, I'm visiting furniture and home-goods stores and showrooms. My lounging-about coverage includes a guide to the best sofa sleepers, a piece on a cooling mattress pad, and an ode to a luxe hangout for cats. I also write our Lego guides (like this one for adults, and this one about plants), which help me appreciate how childhood memories can enrich our adult lives. Like all Wirecutter journalists, I review and test products with complete editorial independence. I'm never made aware of any business implications of our editorial recommendations, and follow all of our editorial standards. Michael Murtaugh/NYT Wirecutter The basics of bean-bag construction are largely the same — it consists of a cover, made of fabric (or sometimes real or fake leather), that encases an insert. This insert is stuffed with either expanded polystyrene (EPS) beads or shredded foam. When done right, beads provide a smoother experience as you move and adjust, while foam tends to feel a bit chunkier but adds a stronger sense of buoyancy. EPS beads are made from tiny plastic resin spheres that expand when exposed to heat and steam, and it's the same material used to create packing foam. These beads have been used as bean-bag stuffing since the category's debut with the Sacco, invented in 1968 by three Italians designers and still available today. When it comes to EPS beads, we quickly learned that what sets apart the good from the bad is both the amount of beads used and their size. Our least favorite bag had thick beads, about half the size of a marble, and you could distinctly feel each one under the cover, while the most comfortable bags had beads that were tiny and created a more uniform, yet malleable, surface. Some bags held so few beads that we sank right through them, others were so overstuffed that our weight barely made a dent. The larger beads we encountered had a bad smell, sort of a wet-dog-soaked-in-formaldehyde stench that refused to go away. With a couple of exceptions, we tested bags in the four-feet-wide range, a decent middle ground to fit either an adult or child/teen, and a width that doesn't take up too much floorspace but still feels luxurious. We also prioritized the following: An easy-to-wash cover a wide selection of color and/or fabric styles to choose from brands that offer a range of sizes to accommodate different spaces and body types. After paring our list down to 17 models, we called in 10 to test. The process included unpacking, fluffing, and then lounging in each bean-bag chair. I sat in them while working on my laptop, and I paid close attention to how the covers felt against my skin and how the filling felt beneath my body. Over the course of four weeks, we noted how the foam options held their shape with increased compression over time and whether the stitching held strong. We also got opinions from about 25 Wirecutter writers and editors, who offered their thoughts on the bean bags during a company gathering. We caught several staffers working from the bags in the weeks that followed, and we paid attention to the ones people gravitated toward the most. Over two dozen kids also weighed in during our annual Take Your Kids to Work Day. Ultimately, we ended up with six picks. Michael Murtaugh/NYT Wirecutter This bean bag is hard to beat. There's a massive selection of colors and textures to choose from, and it has a buoyant, proprietary filler. It's also extremely pricey, but it comes with a lifetime warranty. Why it's great: Of the five size options offered by Lovesac, the MovieSac hits a sweet spot. It's large enough to feel extra luxurious but not so big that it overpowers. When the cover is properly positioned (with the small flap right where your back would land as you sit; see the photo, above), it forms a slight indentation on the top and toward the front. So it looks more like a proper seat than a massive furball. For its filler, Lovesac uses a proprietary blend of three foams with different densities; the company told us this blend absorbs body weight evenly and resists permanent compression. We've found the former assertion to be true, and so far it always puffs back up nicely. All Lovesac chairs come vacuum-sealed in a large, reusable tote, and it takes a day or two for the insert to completely expand (like a foam mattress). Using the chair as a punching bag speeds up the process, and it doubles as an aggression outlet. If you want to return the bag or place it in storage, you can re-shrink the insert inside the large plastic bag and tote that it came in. If you saved your original tote but not the plastic bag, look for a bag that's around 60 gallons. You can also buy a shrink kit (usually $65) if you've tossed both the tote and the plastic bag. (Lovesac will send you one for free if you're within the 60-day trial period.) Just use a regular vacuum-cleaner hose to suck the air out after you've removed the cover. The time this takes varies depending on the strength of your vacuum cleaner, but expect around 10 minutes (or less if you're using a wet/dry vac). You can order up to five fabric swatches before making your decision, and considering the chair's cost, we highly recommend doing so, or you can visit one of its retail locations. We tested the Chinchilla Dense Phur, and we found the texture to be thick and soft, with no visible shedding. Flaws but not dealbreakers: The price is the one dealbreaker, hands down. The cheapest combination of an insert plus cover is the chenille fabric option, and for the MovieSac size, that currently starts at around $600. Dimensions: 4 by 3.7 feet (width by height) Weight: 45 pounds Cover options: over 150 color, pattern, and fabric combinations Filler: shredded recycled foam Return policy and warranty: There's a 60-day trial period; there's a lifetime warranty (if you buy it directly from the company). Michael Murtaugh/NYT Wirecutter Is it comfortable? Heck, yeah. Is it also obnoxious? That depends on how much spare room you've got. Why it's great: First, our apologies to our readers who live in smaller homes, since Lovesac's The BigOne works only in gigantic rooms. If you don't mind spending a lot more, this is a tempting purchase, but you also need to be realistic about your space. Even plopped into our roughly 825-square-foot testing basement, this chair looked enormous (and it infringed upon our appliance team's vacuum-testing area). That said, this chair is great fun as a soft landing pad for flying leaps and a cozy cloud for snuggling. The website's size illustration shows two adults and two children fitting on it, but of course this all depends on a person's size. We think two adults or one adult and a kid or two, max, is more realistic. We tested the vintage blue rained chenille, and we found it to be pleasantly soft yet durable enough to withstand being dragged across our concrete floor. Flaws but not dealbreakers: A company rep was candid about The BigOne being Lovesac's most often returned option, largely (heh) due to how big it is. Don't let your eyes get bigger than your available square footage — or your wallet, for that matter. The cheapest combination of insert and cover (the chenille we tested) starts at just over $900. Muscle strength is also necessary. When this chair arrived, I had to curve my body inside the partially unrolled vacuum-sealed insert and push with my feet to unfurl it, and it took three Wirecutter staffers to ferry it from the testing space to the photo studio. Dimensions: 6 by 4.1 feet (width by height) Weight: 95 pounds Cover options: over 150 color, pattern, and fabric combinations Filler: shredded recycled foam Return policy and warranty: There's a 60-day trial period; there's a lifetime warranty (if you buy it directly from the company). Michael Murtaugh/NYT Wirecutter We like this outdoor option for indoors too. But due to the chair's rectangular shape, there's a bit of a learning curve to making it comfortable. Why it's great: We tested the Fatboy Original Bean Bag Chair (intended for use indoors) and the Original Outdoor Bean Bag Chair, and we much preferred the latter. Despite its name, the Outdoor bag is just as comfortable in the living room as it is on the patio. All of our testers, including adults and children, found the thick, heavy nylon cover of the indoor version (the Original) to be uncomfortably stiff. By contrast, the outdoor cover is more of a soft, canvas-like texture, and it repels dirt and water; it's made from olefin (a fabric used on many weather-protected products, including outdoor couches and patio umbrellas). Spilled water rolls right off of the Fatboy Original Outdoor Bean Bag Chair. Joshua Lyon/NYT Wirecutter Fatboy uses EPS beads for filler and describes it as 'virgin.' This just means it isn't made from recycled material, which can be more expensive to produce. (That said, Fatboy also told us that they are 'actively transitioning to more sustainable filling alternatives.') Fatboy also makes all types of bean-bag–style seating, from rockers to pool floats. I've tried the float (known as the Floatzac) and am a huge fan of its ability to keep you buoyant almost entirely above water. Fatboy's Floatzac keeps you almost entirely elevated above the water. Joshua Lyon/NYT Wirecutter Flaws but not dealbreakers: Due to its rectangular shape, the Fatboy Original Outdoor Bean Bag Chair involves a bit of a learning curve to get comfortable. You have to lift it by the top corners and drop it down, and then you sit on the bottom third. This ensures there are enough beads to make a comfortable seat and enough behind you for back support. If you sit down on this chair without fluffing it first, your bottom will likely hit the ground. If you're shopping for a bag with a fluffy surface, the Fatboy chair isn't for you. The covers for their indoor models are available in nylon, recycled velvet, and terry cloth only, and in fact, this bag came in dead last with our kid testers. It just couldn't compete with the snuggly faux fur on many of our other models. Dimensions: 4.5 by 5.9 feet (width by length) Weight: 13.5 pounds Cover options: 12 colors, all in olefin fabric (except the red, in Sunbrella) Filler: EPS beads Return policy and warranty: Returns are accepted within seven days of receipt; there's a one-year manufacturer defect warranty. Michael Murtaugh/NYT Wirecutter The insert, a folded-in-half mattress stuffed with shredded foam, provides the perfect amount of give and support in both its bean bag and sleeper forms. Why it's great: The genius of Cordaroys Convertible Bean Bag is that it's two loungers in one. Instead of having the standard spherical innards, this chair is actually a folded-in-half mattress stuffed with shredded foam. When you remove the cover, you've got a guest bed that's perfect for children's sleepovers, and it's even a decent bed for unfussy adult visitors. We tested the queen-size-mattress version, and we were pleasantly surprised by how relatively comfortable and supportive both the bag and mattress pad were. To keep this chair's proper form as a bean bag, you fit the cover over and around the folded mattress (rather than stuffing it back in willy-nilly, which results in a lumpy seat). The company claims its shredded foam is 'hypoallergenic,' and while we can't confirm that detail, Cordaroys is up to date on its CertiPUR-US certification status, as of 2025. Flaws but not dealbreakers: We initially tested a faux-fur cover in white-with-brown-spots, and the bovine pattern was a huge hit with kids and adults alike. However, during our initial unboxing and testing, we noticed a lot of flyaway strands. We ran the cover through the washer and dryer, and it shed a shocking amount of strands, so we hoped the issue was solved. But it continued to shed, and even after a second cleaning, the cover released puffs of flyaway fur whenever we sat on it. So we ordered a corduroy cover for the chair instead, and we loved its soft, textural surface, with ridges about three times as thick as what you'd find on a pair of corduroy pants. After one round of washing and drying the Cordaroys Convertible Bean Bag's faux-fur cover, the amount of fuzz we collected was quite substantial. (The second round trapped less but did little to reduce the flyaway strands.) Abby Balter/NYT Wirecutter That said, during our testing by kids, one staffer's daughter fell in love with the cow version, and the family will be long-term testing it. ('We have a gazillion vacuums going due to our dog and allergies, so I think some shedding is probably fine,' her mom said.) We'll see if the strands calm down, and we'll report back when we update this guide. Dimensions: chair, 48 by 48 inches (width by height); bed, 60 by 80 inches (width by length) Weight: 29 pounds Cover options: 13 fabrics; 18 colors and patterns Filler: foam Return policy and warranty: Returns are accepted within 30 days of receipt (but you pay for shipping); it comes with a lifetime warranty. Michael Murtaugh/NYT Wirecutter Our smallest pick holds its shape well, and it offers surprisingly decent lower-back support, even for some adults. Why it's great: The smallest bean bag we tested was the large version of the Pottery Barn Teen Sherpa Ivory Bean Bag Chair (just under 3.5 feet wide). Some of the other bags we tested, which came in under 4 feet, had too many or too few EPS beads, so we were either perched uncomfortably on top or sank right to the floor. Pottery Barn Teen's bag was just right, with a seat that was deep enough for lounging and supported the lower back. So for an adult, this bag serves as more of a squishy, form-fitting chair than something to curl up in, but it's still a fun alternative to a bed or a regular chair when you're reading or watching a movie. The cover, insert cover, and beads are all UL Greenguard–certified. For an additional $16, you can get the bag monogrammed with up to three characters in five different fonts (though this voids the return policy). The zipper is lockable and comes with two adorable little keys (to keep very young kids from getting to the insert's beads). The Pottery Barn Teen Sherpa Bean Bag Chair has a lock on the zipper, to keep the youngest users from accessing the insert and beads. Joshua Lyon/NYT Wirecutter Flaws but not dealbreakers: We suspected that Wircutter staffers' kids would have a discerning eye, yet we were still surprised by just how many of them noted that the white fabric would likely get dirty fast. And while they're probably right, we haven't noticed any egregious build-up, even after we dragged the bag around our offices for over a month. Like the rest of our picks' covers, this one is machine-washable. If you want to avoid white altogether, the bag comes in over two dozen colors and fabrics. We also found that the EPS beads were a bit larger than the ones in most other bags we tested; the larger beads created a slightly more textured surface, but it didn't bother us. Dimensions: 41 by 24 inches (width by height) Weight: 8 pounds Cover options: 31 fabric, color, and design combinations Filler: EPS beads Return policy and warranty: Returns are accepted within 30 days of receipt (void if monogrammed); there is no warranty. . This chair's foam filling is stiffer and much more noticeable than that of our other picks. But the bag still offers plenty of support, and it costs a lot less. Why it's great: We tested the roughly 4-foot-wide Ultimate Sack 4000 after editor Kalee Thompson told us about the 5-foot version (the Ultimate Sack 5000, which appears in our gift guide for tweens). Kalee and her family have been enjoying this chair for over five years, and she said there are no signs of its flattening, despite near-daily use. When we were testing the 4000 model, the chunks of memory foam were a bit stiffer than the fillings of our other picks, but the 4000 chair was still squishy enough to be comfy while holding you aloft. The best thing about the Ultimate Sack, though, is the price: At the time of writing the 4000 was $225, from Ultimate Sack, compared with $600 for the cheapest iteration of a similarly sized MovieSac. (Indeed, Kalee bought the 5000 after her family fell in love with Lovesac's The BigOne on a trip to the mall, but understandably she balked at the price.) If you order direct from Ultimate Sack, you can have a full name embroidered onto the bag (for an additional fee), and all of the available covers are machine-washable. Flaws but not dealbreakers: Compared with the fillings of our other picks, the Ultimate Sack 4000's shredded foam is bigger and chunkier, with edges you can distinctly feel through the fabric. The teal polyester cover (the company calls it 'suede') we tested felt cheap to the touch, but it proved durable when we hauled it around the office. Plusher covers are available, for a slight increase in price. Dimensions: 48 by 28 inches (width by height) Weight: 40 pounds Cover options: 17 fabric and color combinations Filler: foam Return policy and warranty: Returns are accepted within 15 days of delivery (including for customized bags) from Ultimate Sack; there's a 10-year limited warranty. At first, the Big Joe Fuf Large Foam Filled Bean Bag Chair held a lot of promise. We liked the terracotta color we selected, as well as the soft, thick corduroy cover, and it initially felt nice and cushiony. Within just a couple of days, however, we found ourselves sinking all the way to the floor whenever we sat on it, despite fluffing it up each time. With its EPS bead filling, the Muji Body Fit Cushion seemed like a great contender, thanks to its chic covers (sold separately) in grown-up colors like mustard. But we should have paid better attention to the name — it really is more of a large cushion. It feels stiff to sit on, but if you prop it up against a surface, like a wall or the front of a sofa, it provides nice, squishy support. Still, a couple of large pillows would work just as well. Our hunt for an inexpensive bean bag brought us to the Posh Creations Bean Bag Chair, X-Large. It was an immediate dismissal due to the rank stench of its cheap, oversize EPS beads, and its overly stuffed insert provided almost no give, so it felt like sitting on a box. This article was edited by Joanne Chen and Daniela Gorny.