logo
European markets edge higher as investors eye ECB interest rate decision

European markets edge higher as investors eye ECB interest rate decision

Yahooa day ago

Markets are widely expecting the European Central Bank (ECB) to cut interest rates again at its monetary policy meeting later today.
"At its most recent meeting in April, the ECB reduced its key interest rates by 25 basis points, bringing the deposit facility rate to 2.25%. Markets are now pricing in another cut in June, though expectations for further easing beyond that remain uncertain. A potential pause in July is gaining traction, as the ECB evaluates incoming economic data and inflation dynamics," market analysts at Capital.com said.
The latest decision will come as inflation in the euro area cooled more than expected in May, bolstering expectations that the ECB will announce another interest rate cut.
Annual consumer price growth slowed to 1.9% in May, down from 2.2% in April, according to a flash estimate from Eurostat this week. The figure came in below economists' forecast of 2%, and marks the first time inflation has dipped below the ECB's 2% target since September 2024.
The decline in headline inflation suggests that business uncertainty, partly driven by renewed global trade tensions and soft consumer demand, is weighing on pricing power across sectors.
Core inflation, which strips out volatile food and energy prices, also showed signs of easing. It slowed to 2.4% in May, from 2.7% in April, falling below expectations of 2.5%. On a monthly basis, core prices rose by just 0.1%.
Related
Eurozone inflation falls below ECB 2% target in May: Rate cut in sight
Meanwhile, Asian shares were mixed on Thursday, as Wall Street's big recent rally lost some momentum following a pair of potentially discouraging reports on the American economy.
US futures edged lower and oil prices declined.
Japan's benchmark Nikkei 225 shed 0.2% to 37,658.46, while Australia's S&P/ASX 200 declined nearly 0.1% to 8,535.10.
In South Korea, the Kospi jumped 2.1% to 2,829.48 after the country's new president and leading liberal politician Lee Jae-myung began his term, vowing to restart talks with North Korea and beef up a trilateral partnership with the US and Japan.
Hong Kong's Hang Seng gained 0.9% to 23,856.54, while the Shanghai Composite was little changed, inching down less than 0.1% to 3,374.30.
On Wednesday, the S&P 500 finished the day virtually unchanged at 5,970.81 and remained 2.8% below its all-time high. The Dow Jones Industrial Average fell 0.2% to 42,427.74, and the tech-heavy Nasdaq composite added 0.3% to 19,460.49.
The action was stronger in the bond market, where Treasury yields tumbled following weaker-than-expected economic updates.
In other dealings early Thursday morning, benchmark US crude fell 8 cents to $62.77 a barrel. Brent crude, the international standard, edged up 1 cent to $64.87 a barrel.
The US dollar rose to 142.87 Japanese yen from 142.78 yen. The euro cost $1.1413, little changed from $1.1418.

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Trump wants a manufacturing boom. The industry is buckling.
Trump wants a manufacturing boom. The industry is buckling.

Politico

time14 minutes ago

  • Politico

Trump wants a manufacturing boom. The industry is buckling.

President Donald Trump is vowing to spark a manufacturing boom with tariffs to protect American workers and industry. So far, it's manufacturers that have borne the brunt of the pain. The president's surprise decision to raise tariffs on imported steel and aluminum to 50 percent will hit domestic manufacturing just as a new report shows the industry is already contracting. Uncertainty about where tariff rates will ultimately land — or where they'll be applied — has forced businesses to make hard decisions that could cut into both profits and hiring. And a leading trade group on Thursday called on Trump to give the companies a break on the tariffs. 'For a president who is intent on building U.S. manufacturing, the tariff strategy he's laid out is remarkably short-sighted,' said Gordon Hanson, a Harvard Kennedy School professor whose groundbreaking 2016 research work, 'The China Shock,' was among the first to sound the alarm about the threat to American industry. 'It fails to recognize what modern supply chains look like.' 'Even if you're intent on reshoring parts of manufacturing, you can't do it all,' he said. 'Steel and aluminum are part of that.' If Trump's tariffs fail to result in a manufacturing renaissance — a central focus of his presidential campaign — it could weaken the prospects of a GOP coalition that's increasingly reliant on working-class voters who supported his protectionist trade policies. But as unanticipated tariffs continue to drive up input costs for companies that need steel and aluminum for production, the warning signs emanating from manufacturers are getting louder. An index published this week by the Institute for Supply Management, which tracks manufacturing, slipped for the third straight month in May as companies made plans to scale back production. A quarterly survey conducted by the National Association of Manufacturers reported the steepest drop in optimism since the height of the Covid-19 pandemic, with trade uncertainty and raw material costs cited as top concerns. Federal Reserve data this month reported weaker manufacturing output. The manufacturers' association on Thursday urged Trump to develop a 'speed pass' that would allow companies to avoid costly new duties on imported raw materials and components that are essential to U.S. producers. 'The steel and aluminum tariffs are almost custom-made to hurt American manufacturing,' said Ernie Tedeschi, a former top Biden administration economist who's now with the Yale Budget Lab. Trump and top administration officials argue that tariffs will encourage investment in domestic manufacturers, which should lead to better-paying jobs, a more resilient economy and more secure supply chains. Exports climbed in April as the president's tariffs took hold, which contributed to an eye-popping decline in the U.S. trade deficit. Indeed, the overall economy remains solid, and businesses are continuing to hire, according to Friday's jobs report for May. Despite the trade headwinds, employment in the manufacturing sector has remained steady since Trump took office. 'As the president says, if you don't make steel, you can't fight a war. He's protecting that industry and bringing it back,' Commerce Secretary Howard Lutnick told Senate lawmakers this week. 'You're going to see more steel and aluminum furnaces and mills in the history of this country get built over the next three years.' The White House did not respond to a request for comment. Trump welcomed the monthly jobs report, posting on Truth Social: 'AMERICA IS HOT! SIX MONTHS AGO IT WAS COLD AS ICE! BORDER IS CLOSED, PRICES ARE DOWN. WAGES ARE UP!' Still, domestic manufacturers who rely on international supply chains for critical steel and aluminum inputs will face tough choices if they want to maintain their profits while keeping output steady. 'Higher costs are expected. Higher input prices. The question is, what do you do with those costs? How much can you pass along to the consumer? How much can you negotiate with your suppliers?' said Andrew Siciliano, a partner at KPMG who leads the consulting firm's trade and customs practice. The challenges posed by the increase in steel and aluminum tariffs are particularly acute because it's far from clear whether domestic suppliers will be able to meet the demands of domestic manufacturers. Almost half the aluminum used in the U.S. last year came from foreign sources, according to federal data, and roughly a quarter of all steel is imported. Either way, 'input costs are going to be higher,' Siciliano said. 'If they pass it on, it could affect demand. If they don't pass it on, it could affect profitability.' That isn't to say manufacturers won't benefit from tariffs in the long term. To the extent that Trump's overall tariff regime limits imports, U.S.-based industrial production could expand to address unmet demand. The Budget Lab's analysis of Trump's tariff regime — which includes the 50 percent tariffs on steel and aluminum — projects that manufacturing output could grow by 1.3 percent over the next five years if existing import duties are left in place. But Tedeschi cautioned that growth may exclude segments like electronic and semiconductor production — which tend to generate higher incomes for workers. Meanwhile, output in other sectors like construction or agriculture would likely contract. Julia Coronado, founder of MacroPolicy Perspectives, also said the flurry of new import duties may prompt some manufacturers to actually move their manufacturing facilities offshore rather than subject their supply chains and production processes to multiple tariffs. 'If I have to assemble a bunch of parts and inputs, why don't I just don't do that on the Canadian or Mexican side of the border and then pay the tariff on the final good?' she said. An even bigger challenge may involve finding and training workers who can staff up any facilities that reshore. Most Americans work in the service sector and, to the extent tariffs lead to reshoring, those facilities will likely rely heavily on automation, according to economists at the Bank of America Institute. Finding qualified workers in the U.S. is either too difficult or too expensive. 'Whatever manufacturing production comes back to the U.S. will require far fewer jobs than 30 or 40 years ago,' Hanson said. 'It's just the way the world has gone.'

Britain's biggest steelmaker warns it faces Trump tariffs hit
Britain's biggest steelmaker warns it faces Trump tariffs hit

Yahoo

time14 minutes ago

  • Yahoo

Britain's biggest steelmaker warns it faces Trump tariffs hit

The Indian owner of the Port Talbot steelworks has warned that a carve-out from Donald Trump's tariffs is 'critical' to its business. Tata Steel's UK operations are at risk of falling foul of American import tariffs even if a pending agreement between London and Washington is formalised, because of a reliance on steel made in India and elsewhere. This is because of American demands that UK steel products can only be exempt from tariffs if they used metal that was 'melted and poured' domestically. Ministers are trying to secure an exemption for Tata, which is Britain's largest steel producer, but the business otherwise faces being hit by Mr Trump's 50pc tariffs on foreign steel. The company closed the last blast furnaces at Port Talbot, south Wales, last year and is currently in the process of building an electric arc furnace at the site, which will recycle domestically-sourced scrap metal. In the meantime, Tata has resorted to importing steel melted in India and Europe for processing into products that are then shipped onwards to America. The temporary measures mean the company risks running afoul of Mr Trump's 50pc tariffs on foreign steel, which are currently scheduled to be imposed on the UK from July 9. British steel products already face tariffs of 25pc, like those from much of the rest of the world, but the trade deal in principle struck by Mr Trump and Sir Keir Starmer would see the tax rate fall to zero. However, despite four weeks of talks, the deal has yet to be implemented. When Mr Trump imposed 50pc steel tariffs on the rest of the world, he gave Britain a reprieve until July 9 – and negotiators are now racing to conclude something before then. Even this poses a problem for Tata, as the deal's framework stipulates that steel products sent from the UK to the US must use steel that was 'melted and poured' domestically to qualify for tariff relief. The Government is seeking to obtain a temporary carve-out for Tata and has reportedly said it is confident of success, but the warning from Tata signalled nervousness within the company on Friday. It is understood that being hit by 50pc tariffs would force Tata to either try to pass some costs on to customers or absorb them itself. If it could not absorb them, production cuts may have to be considered. Rajesh Nair, the chief executive of Tata Steel UK, said: 'Tata Steel UK will need to import steel substrate until Electric Arc Furnace steelmaking is operational in Port Talbot from late 2027 onwards. 'It is therefore critical for our business that melted and poured in the UK is not a requirement to access the steel quotas in any future trade deal. 'Even though we are not currently melting steel in the UK, we remain the largest steel producer in the country and our mills continue to transform imported steel coil and slab into high-value, specialist products which are not available from US producers and are therefore essential to our US customers. 'We urge the Government to secure a deal as soon as possible, and we would be happy to provide the US government with any needed assurances on the provenance and processing of the steel we supply.' Broaden your horizons with award-winning British journalism. Try The Telegraph free for 1 month with unlimited access to our award-winning website, exclusive app, money-saving offers and more.

UAE's data center project with U.S. tech firms faces security concerns
UAE's data center project with U.S. tech firms faces security concerns

Yahoo

time14 minutes ago

  • Yahoo

UAE's data center project with U.S. tech firms faces security concerns

-- A massive deal to create one of the world's largest data center hubs in the United Arab Emirates (UAE) with American technology, continues to face persistent security concerns, according to a Friday report by Reuters. The deal, worth billions of dollars, is reportedly far from finalized. The proposed site, spanning 10 square miles, is financed by G42, a tech company linked to the Emirati state. G42 is spearheading the development of the UAE's artificial intelligence (AI) industry. Tech giants Nvidia (NASDAQ:NVDA), OpenAI, Cisco (NASDAQ:CSCO), Oracle (NYSE:ORCL), and Japan's SoftBank (TYO:9984) are collaborating with G42 on the initial phase of the project, dubbed Stargate UAE, which is slated to launch in 2026. However, U.S. officials are yet to establish the security conditions for exporting the advanced chips or how the agreement with the Gulf state will be enforced. This leaves the deal unresolved. During a visit by then-President Trump, Abu Dhabi pledged to align its national security regulations with Washington's, including measures to prevent the misuse of U.S. technology. Concerns remain about the UAE's close ties with China, with the report noting that these issues have been consistent during both Biden and Trump administrations. The primary concern is the reliability of the Gulf state as a strategic partner. The report didn't indicate if new evidence had surfaced, but stated that existing concerns are still not addressed. During Trump's first term, the UAE and other Gulf states proceeded with the deployment of Huawei 5G technology, despite opposition from the U.S. Some U.S. officials also question whether the UAE can effectively prevent American technology from reaching Washington's adversaries, the report added. Related articles UAE's data center project with U.S. tech firms faces security concerns Melius upgrades Deere on long-term tech moat and recurring revenue upside Taseko Mines shares surge on landmark agreement with Tŝilhqot'in Nation

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into the world of global news and events? Download our app today from your preferred app store and start exploring.
app-storeplay-store