The best open-ear headphones for safer running, tried and tested
Because of their open design, there's an unavoidable dip in sound quality compared to in-ear and over-ear headphones, but you'd be surprised by how dynamic the best models sound. They tend to offer better sound quality than bone-conducting headphones while ensuring that you can hear outside noise.
However, because they're designed to let ambient noise float in, they naturally struggle in consistently loud environments – open-ear headphones are best for avoiding hidden dogs and cyclists on your morning run, rather than disappearing into a podcast on your morning commute.
The best open-ear headphones offer complete situational awareness while mitigating as many of these downsides as they can, and in recent years, the tech has massively improved. Fashion-forward designs like the Bose ultra open not only sound great but look smart too, while fitness-focused earphones like the Shokz OpenFit 2 use secure and comfortable silicone hook designs to cope with more vigorous outdoor workouts.
How we tested
I assessed each of these in-ear headphones for sound quality, comfort, battery life and overall value. I wore them on our outdoor runs and walks, as well as at home, listening to a range of music genres and podcasts to get a sense of their strengths and weaknesses. I also considered the size and convenience of charging cases, app usability, EQ options and additional features.
Why you can trust IndyBest
Steve Hogarty is a tech critic for The Independent. He's interested in anything with a microchip, from laptops and robot vacuum cleaners to ereaders and headphones. Steve always has one eye on the latest developments in tech, which means that if there's something exciting and innovative in the world of audio, Steve will know about it. Now, in his review of the best open-ear headphones, Steve has gone beyond technical specifications to what it's actually like to use the headphones in the real world.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Reuters
3 minutes ago
- Reuters
Democrats decry move by Pentagon to pause $800 million in nearly done software projects
WASHINGTON, Aug 15 (Reuters) - Democrats took aim at the Trump administration after Reuters reported on Wednesday that the Navy and Air Force were poised to cancel nearly completed software projects worth over $800 million. The reason for the move was an effort by some officials at the services to steer new projects to companies like Salesforce (CRM.N), opens new tab and Palantir (PLTR.O), opens new tab, in what could amount to a costly do-over. 'The Pentagon has yet to show that it had a good reason for halting these contracts in the last inning and scrapping work American tax dollars have already paid for," Democratic Senator Tim Kaine said in an emailed statement. "If it can't show its homework, then this announcement - just days after Palantir's CEO spoke at Mike Johnson's Wyoming donor retreat - reeks of corruption.' Punchbowl reported earlier this month that Palantir CEO Alex Karp planned to address Republican House Speaker Mike Johnson's annual big-donor retreat in Jackson Hole, Wyoming. The Pentagon and Air Force did not immediately respond to requests for comment. The Navy declined to comment. Trump officials say the administration is striving to make the contracting process more efficient. Trump took office vowing to rid the government of what he calls waste and abuse. The website of the Department of Government Efficiency, the agency he created to spearhead those efforts, lists over $14 billion in Defense Department contracts it claims to have canceled. But seven months into his presidency, some of his own actions have complicated DOGE's work, from firing the Pentagon's inspector general to issuing an executive order prioritizing speed and risk-taking in defense acquisitions. 'If you're serious about cracking down on waste, fraud, and abuse, the last thing you'd do is cancel $800 million in projects that are nearly ready to roll out just to turn around and steer the same work to corporations of your choosing," said Democratic Representative Maggie Goodlander, who sits on the House Armed Services Committee and served as an intelligence officer in the United States Navy Reserve for over a decade. "This maneuver is an insult to taxpayers and servicemembers across America," she added. Salud Carbajal, another House Democrat who sits on the House Armed Services Committee, said the behavior was part of a pattern of waste at the Pentagon under Trump. 'I understand that our military's acquisition and procurement processes aren't flawless, but this administration has repeatedly shown a blatant disregard for the responsible use of taxpayer dollars,' said Carbajal. 'From lavish military parades to unnecessary troop deployments in Los Angeles, President Trump has used our armed forces to inflate his own ego and enrich his allies," he said, adding that he would continue to call out mismanagement and press for accountability.
Reuters
3 minutes ago
- Reuters
U.S. Senator Hawley launches probe into Meta AI policies
Aug 15 (Reuters) - U.S. Senator Josh Hawley launched a probe into Facebook parent Meta Platforms' (META.O), opens new tab artificial intelligence policies on Friday, demanding documents on rules that had allowed its artificial intelligence chatbots to 'engage a child in conversations that are romantic or sensual.' Both Democrats and Republicans in Congress have expressed alarm over the rules outlined in an internal Meta document first reported by Reuters on Thursday. "We intend to learn who approved these policies, how long they were in effect, and what Meta has done to stop this conduct going forward," Hawley said. Meta declined to comment on Hawley's letter on Friday. The company said previously that "the examples and notes in question were and are erroneous and inconsistent with our policies, and have been removed.' In addition to documents outlining those changes and who authorized them, Hawley sought earlier drafts of the policies along with internal risk reports, including on minors and in-person meetups. Meta must also disclose what it has told regulators about its generative AI protections for young users or limits on medical advice, according to Hawley's letter. Hawley has often criticized Big Tech. He held a hearing in April on Meta's alleged attempts to gain access to the Chinese market which were referenced in a book by former Facebook executive Sarah Wynn-Williams.
The Independent
33 minutes ago
- The Independent
Bambu Lab H2D 3D printer review: Your own personal manufacturing hub
Setting up the H2D couldn't be easier. Unlike the fiddly builds of older 3D printers, this machine arrives almost fully assembled straight out of the box. Simply place the AMS unit (the box that holds and automatically feeds the filament into the printer) on top, connect the tubes and cables at the back, and power up. The H2D then takes care of all calibration and setup, guiding you step-by-step through the entire process, including installing the filament. This is one of the first printers to offer up to five filaments out of the box – four in the AMS multifilament unit and one for standard or specialist materials on the side. These specialist materials, such as carbon-fill and TPU (thermoplastic polyurethane), put far greater demands on printers but offer more flexibility, especially for professional use. I dived straight in and started printing the benchmarks. One of the big advantages here is that the Bambu Lab software, BambuStudio, is straightforward to use, with plenty of online help to get you started. Compatible with both Mac and PC, you can use it with your computer connected directly, or, if you have the printer in a workshop, you can operate it remotely through your home network. When the H2D laser full combo was announced, many of us hoped for a true multi-toolhead 3D printer, but at the moment, only the Original Prusa XL offers this potential with four tool heads. While the H2D is a multi-toolhead machine, those additional toolheads are modules that clamp onto the front of the main print head. These include the laser, cutter, and plotter modules. The always-in-place 3D printhead features two nozzles, meaning two filaments are always ready to go, double the usual amount, but less than many of us in the community had hoped for. Why are more heads better than one? Well, it means there is less material waste and more speed, so two nozzles in one toolhead is a good halfway house. The waste issue really only becomes apparent when a third material is introduced, as one filament has to be retracted so the new filament can be used. As the filament swap is being managed and to avoid cross-contamination, the old and then new filament are purged to clear the nozzle, and this is where the filament waste can start to stack up. For the majority of the test, I placed the black filaments on the outer feeding spool, as it was the most commonly used, and this fed into the left-hand nozzle, cutting down on retractions and purging, with only the filaments in the AMS going through the right-hand nozzle needing to purge as they swapped. When it comes to the more specialist materials, such as the rubberised material TPU, these can't go through the AMS and must go through the left nozzle supplied by the outer spool. The issue here is that the setup to get TPU printing requires the stretchy filament to be rerouted through the back of the machine through a third hole, which can prove fiddly, however good the end result is. With standard materials such as PETG (polyethylene terephthalate glycol-modified), PLA (polylactic acid) and ABS (acrylonitrile butadiene styrene), this machine is highly optimised, so print failures were virtually non-existent during the initial tests. To put the idea of using the H2D as a personal manufacturing hub to the test, I designed a simple GoPro-style handlebar mount. Multiple copies of the design were printed across the platform in a high-impact material, ASA (acrylonitrile styrene acrylate), which is both water- and UV-resistant, making it ideal for small-scale projects. The STL (stereolithography) files that I had created in a computer-aided design (CAD) application were imported directly into BambuStudio and then sent through the network to the machine. The total time for 28 units to print was one day and 11 hours, so it is by no means fast, but still quicker and cheaper than having tooling made for injection moulding. Once the print had finished, it was time to swap the tool head to create the packaging. The cutter, plotter and laser all use a new piece of software called Bambu Suite, which, like Studio, is well laid out, but you'll probably need to spend some time familiarising yourself with the layout before diving in. The next step was to create a product box. To start, I installed the pen head, which clamps in front of the 3D print head and, in turn, the cutter. Then, the graphics and meshes were loaded into the Bambu Suite software, everything was lined up, and then all that was left to do was hit go. The pen got to work, drawing on the card to create simple graphics. Each pen has one colour, but swapping for another is quick and easy if you want multiple shades on your material. Once the graphics were finished, I swapped the pen for the cutter tool to cut out the box shapes, then manually glued them together. With everything set up in the Bambu software, once I'd hit go, each box was cut out perfectly and, unlike laser cutting, there was no scorching – just clean, precise lines. The whole process of producing 28 GoPro-style mounts and accompanying packaging took about two days, although most of that time was spent printing. In reality, the active time is mostly spent laying things out in the Bambu Lab software and then assembling the boxes. A major part of this machine is the laser cutter and engraver. If you want to sell in shops or at events, you'll need a display to show off your products. Swapping out the toolhead, removing the cutter and replacing it with the laser cutter takes just a couple of minutes. Using 3mm basewood ply, I laid out my design in the Bambu Lab software and sent it through to the H2D – another streamlined process. Once the laser finishes cutting safely in its enclosed environment, the basewood can be removed. The parts push out and assemble easily with a bit of PVA glue, and I used the engraver to add a logo to the display, for a touch of personalisation. When using the laser engraver, you do need an extractor. Bambu Lab makes its own, which I used for this review, with the filtration system helping to cut down fumes from both the laser and 3D printing processes.
