
These 7 staff-favorite soda makers are easy to set up and use
To find the best soda makers on the market, my fellow NBC Select staffers and I tested the top soda makers from brands like Sodastream, Aarke, Drinkmate and more. I also spoke with experts from soda maker brands for their guidance.
How I picked the best at-home soda makers
There are few important aspects to consider when choosing a good at-home soda maker. Here's everything our experts recommended I keep in mind when making this list:
Functionality: In looking for a good at-home soda maker, I prioritized machines that are easy to operate, including installing the CO2 cylinder. I also looked for ones that are suitable for both water and other types of beverages like juice. All of the soda makers below are meant for carbonating water but only a few are good for both water and juice. Brands like SodaStream and Aarke are only for water, while Breville's InFizz and Drinkmate's soda maker can carbonate juice in addition to water.
OEM bottles: It's also best to only use soda makers that come with their own OEM-style plastic bottles (original equipment manufacturer), according to Bill Turnau, a digital marketing specialist for Drinkmate. 'Since these bottles are designed to withstand high pressure, using knock-off bottles or bottles not designed for this purpose is extremely dangerous,' he says. All of the soda makers on this list come with bottles designed for their machines. Any mention of Drinkmate in this article was made independently of Turnau. We did not ask him for product recommendations — we only asked him for guidance.
Locking system: Another important factor I considered is whether or not the soda maker comes with a traditional safety locking system or some other way to release pressure from inside the bottle. When you carbonate drinks in the machine's bottles, there's a lot of excess carbonation that has to be released to safely remove the cap. Many soda makers, such as Breville, have this locking component for releasing pressure from the bottle before opening it. Other brands like Aarke have the machine release the pressure on its own.
Carbon dioxide cylinder: Every soda maker on this list comes with its own compatible carbon dioxide cylinder, also called CO2. It's important to note that at-home soda makers come with either a screw-in (also called threaded) cylinder or a snap-in cylinder brands like Sodastream call a 'Quick Connect.' This means that many CO2 cylinders from different brands are compatible with one another, while the ones from SodaStream for example, are only compatible with their machines. The majority of soda makers on this list have a screw-in-style CO2 cylinder and a few others have a snap-in-style design.
Want more from NBC Select? Sign up for our newsletter, The Selection, and shop smarter.
The best at-home soda makers, tested & reviewed
All of the soda makers on this list are ones that NBC Select staffers or I tested out and/or are highly rated on Amazon. Sodastream, Aarke, Breville and Drinkmate sent us samples of soda makers to try out, though I selected models independently of their input and guidance. I also didn't ask any of the brands to recommend products for this story.
Editor's pick: Breville InFizz Fusion
I tried out the Breville InFizz Fusion soda maker and immediately loved how easy it was to set up. While my previous experience using soda makers helped with the process, knowing how to screw in the CO2 cylinder, press the lever at the top to carbonate and then slowly releasing the locking system on top of the bottle was extremely straightforward. The locking system has a red panel that I could push to the side to release the excess pressure from inside the bottle before opening it.
Plus, the plastic bottle that it comes with is extremely durable, so I didn't worry about it getting dented, scratched or warped over time. The brush also made it easy to wash by hand and get non-water residue out of the bottom and sides. My favorite part, though, was that I could carbonate juice in addition to water, so I loved making sparkling apple juice and could see many people (especially kids) getting creative with making their own soda.
I also tried out the Aarke Carbonator 3, which was one of the most well designed at-home soda makers on this list. This soda maker was incredibly easy to set up, since it only required screwing in the CO2 cylinder into the bottom of the base. I could also tell when the bottle was finished carbonating when the machine made a distinct sound. Similar to many of the other bottles on this list, the Aarke OEM bottle has a mark on the side telling you how much water to fill up, including a maximum and minimum amount.
NBC Select associate reporter Ashley Morris tested out the Sodastream Terra, which is one of the brand's most affordable soda makers, after the SodaStream Gaia. The soda maker comes with a dishwasher-safe bottle and panel on top that you push to carbonate water once the bottle locks into place. The Sodastream Terra doesn't have the locking system lid, which eliminates one step from releasing the pressure, similar to the Aarke Carbonator. However, the Sodastream Terra has a removable back so you can easily install the CO2 cylinder without having to push and screw it into the bottom, which can be a bit awkward manually. With that said, the Terra, like with many of Sodastream's makers, is only compatible with the snap-in CO2 cylinder, meaning you can only use it with Sodastream's cylinders.
Jordan Bowman, a commerce editor at NBC Select, tried out the Sodastream Art Sparkling Water Maker, which is somewhat more expensive than the Terra. Similar to Aarke's model, the Art soda maker has a lever on the side that you pull down rather than a button on the top that you press to carbonate water. Bowman was a fan of how easy it was to customize how bubbly you can make your water. 'After quickly scanning the instruction booklet I added my canister and was immediately ready to make some seltzer,' he says. 'You can quickly make about three or four glasses of seltzer water. I tend to use three pumps which creates a more gentle fizz but if you go as high as five it has a more dynamic bubbly effect.' The Art has a removable panel to install the snap-in cylinder and also doesn't require a locking system on top of the bottle to more safely release the pressure, though this does make the process of carbonating slightly faster.
NBC Select social commerce editor Sadhana Daruvuri tested out the Drinkmate OmniFizz and loved how easily it fit in the kitchen of her studio apartment. that the maker came with multiple bottles of different sizes. 'The coolest thing about this soda maker is that it can carbonate drinks other than water,' she says. 'I especially enjoyed using it on fruit juices and reviving flat soda.' Daruvuri also liked that the Omnifizz has a luxe look and didn't feel the need to put it away when she wasn't using it. On the other hand, she found that it took a little bit of time to fully understand how to use the machine, particularly the bottle which didn't always screw in completely.
Cylinder type: screw-in | Compatible with: water, juice and flat soda | Dimensions: 5 x 8 x 16 in. | Dishwasher-safe bottle: no
The Ninja Thirsti Drink System Soda Maker is the only automatic plug-in style soda maker on this list and it came with several flavored syrups for making your own unique carbonated drinks. NBC Select editorial operations associate Jem Alabi tested this soda maker and says that the directions and overall setup process was very easy to follow and that the flavors have a pleasant taste that are great for anyone who enjoys low- or no-calorie flavored sparkling beverages. What's most unique about the Ninja Thirsti Drink System is that it has a compartment on the top that houses the flavored syrups which connect to where the water flows into the bottle, so you don't have to squeeze them yourself. Plus, the machine lets you customize how fizzy your drink is and which size you want (6, 12, 18 or 24 ounces). Instead of a bottle, this machine uses a built-in water canister that dispenses into your own cup or bottle.
Cylinder type: screw-in | Compatible with: water and flavored syrup | Dimensions: 8.7 x 13.9 x 16 in. | Dishwasher-safe bottle: n/a
The Aerflo Aer System is different from all of the soda makers on this list because it is technically a water bottle with a lid that has a built-in CO2 compartment, allowing you to carbonate water wherever you are. I was skeptical at first and curious as to how exactly the carbonation process worked, but I quickly became pleasantly surprised after using it. The bottle comes with small blue exchangeable CO2 capsules that's around the size of an Amazon Fire Stick. The cap has a compartment that I screwed the capsule into; then I placed the cap on the bottle and pressed the middle of it, which injects the carbonation into the water. I took it with me to work and kept it in the drink holder on my backpack and it didn't spill at all. The only drawback is that I wish the capsules lasted longer, especially as someone who enjoys a really bubbly drink.
Cylinder type: capsule | Compatible with: water only | Capacity: 21 oz. | Dishwasher-safe bottle: n/a
How to shop for an at-home soda maker
Some aspects to consider before getting an at-home soda maker include your beverage preferences, kitchen space and more. Here's what our experts recommend keeping in mind: Consider your drink preferences'Consumers should look for functionality that's important to them,' says Turnau. 'If you want to be able to carbonate drinks beyond water, for example, you will want to look at Drinkmate machines as other soda makers are only capable of carbonating water.' In other words, if you want to carbonate more than water, such as juice, wine or flat soda, make sure you choose a model that states that it's compatible with these drinks, rather than trying it on one that says it's for water only. This is important since if you do try to carbonate a non-compatible beverage with machines that are water-only, it can void your warranty if it breaks.
Take into account replacing CO2 cylindersWhile an at-home soda maker helps reduce your consumption of single-use plastics or aluminum, they require you to constantly replace the CO2 tanks, which could be relatively often if you make sparkling water often. Depending on your situation, this can become costly, though brands allow you to return the empty cylinders to them and subscribe to receive refilled cylinders in exchange.
Maintain the bottles over timeAnother important aspect to consider before getting a soda maker is that you'll have to take care of the bottle, especially after multiple uses. Many of the bottles for the machines listed above are not dishwasher safe, so you'll have to make sure you clean them thoroughly by hand and 'avoid exposing it to scratches, extreme heat or freezing temperatures,' says Jonas Groth, the co-founder and chief-designer at Aarke.Prioritize safetyWhile all of the at-home soda makers above are easy to use, especially with the help of directions, it's possible to have a mishap or two when using the machine. This is why having a soda maker with some sort of safety system in place such as self-releasing pressure valves is important, according to Groth. All of the soda makers below have either a locking or self-releasing system to let you know when the water is sufficiently carbonated.
Meet our experts
At NBC Select, we work with experts who have specialized knowledge and authority based on relevant training and/or experience. We also take steps to ensure all expert advice and recommendations are made independently and without undisclosed financial conflicts of interest.
Any mention of Drinkmate, Aarke and Sodastream in this article was made independently of Turnau, Groth and Schilowitz, respectively. We did not ask them for product recommendations — we only asked them for guidance.
Why trust NBC Select?
I'm a commerce editor at NBC Select, where I write about home and kitchen appliances, including reviews and roundups. My colleagues and I all tested every soda maker on this list. I spoke with experts from soda maker brands for their guidance for this story.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


7NEWS
a few seconds ago
- 7NEWS
Vladimir Putin praises Donald Trump's ‘energetic and sincere' peace efforts ahead of Alaska summit
Russia's Vladimir Putin sounded positive Thursday on the eve of his talks with US President Donald Trump in Alaska, saying he believed the American leader was making 'quite energetic and sincere efforts' toward peace in Ukraine. A day ahead of their summit, Putin convened a meeting of advisers 'to inform you about how the negotiation process on the Ukrainian crisis is going,' the Kremlin said in a readout translated by NBC News. The Russian leader said the Trump administration 'is making, in my opinion, quite energetic and sincere efforts to stop the fighting, stop the crisis and reach agreements that are of interest to all parties involved in this conflict.' Those efforts are intended 'to create long-term conditions of peace between our countries and in Europe, and in the world as a whole,' he added, particularly if the negotiations extended to cover strategic offensive weapons treaties. This suggests that a deal on nuclear arms control could be part of the talks. Russia suspended its participation in the New START 'reduction in strategic offensive arms' agreement in 2023. Earlier Thursday, Putin aide Yuri Ushakov said the summit would start with head-to-head talks between Trump, Putin and their translators at 11.30am local time (5.30am Saturday AEST) and would be followed by a joint news conference. The White House later confirmed this. Trump 'wants to exhaust all options to try to bring this war to a peaceful resolution,' Press Secretary Karoline Leavitt told Fox News. The top-level Russian delegation will include Putin, Ushakov, Foreign Minister Sergei Lavrov, Defense Minister Andrei Belousov, Finance Minister Anton Siluanov and Putin's longtime friend and investment envoy Kirill Dmitriev, Ushakov said on a call with journalists in Moscow. The primary topic of the meeting will be Ukraine, he said, but he added that he expected the 'huge, and unfortunately hitherto untapped, potential' of economic ties between the US and Russia would also be discussed. As well as Putin's openly stated goal of subjugating Ukraine, he also wants to end Russia's exile from the Western financial system following economic sanctions imposed by Washington, the European Union and others. Trump has not yet lifted these punishments but has expressed a desire to end Russia's economic pariah status. The Trump-Putin summit has prompted howls of dismay and anxiety across Ukraine and Europe, which have not been invited to the talks and fear what the American president may agree to with his Russian counterpart about the conflict raging on their continent. They have been confined to their own diplomatic scrambling, including dozens of calls between Ukraine's President Volodymyr Zelenskyy and other leaders, culminating in a video call between these parties and Trump himself Wednesday. Zelenskyy said that Putin 'is bluffing' in saying he wants peace. On Thursday, the Ukrainian leader flew to London and met his British counterpart, Prime Minister Keir Starmer, for what both called a 'productive meeting.' As well as the prospect of Britain financing the small drones that have become central to Ukraine's battlefield defense, the pair discussed the Alaska talks, 'which present a viable chance to make progress as long as Putin takes action to prove he is serious about peace,' a spokesperson from Starmer's office, No.10 Downing St, said in a statement. After Wednesday's call with Zelenskyy, Starmer and others, Trump said he had assured them that there would be 'very severe consequences' — without elaborating what those might be — if Putin did not agree to end the war during their sit-down discussion. Two European officials and three other people briefed on the call told NBC News that he told them he would not discuss possible divisions of territory with the man flying in from the Kremlin.


7NEWS
a few seconds ago
- 7NEWS
More than 30 dead in floods and landslides in Indian Kashmir
At least 32 people are dead in flash floods caused by torrential rains in a remote, mountainous village in Indian -controlled Kashmir, a top disaster management official says. Mohammed Irshad said rescue teams scouring the devastated Himalayan village of Chositi brought at least 100 people to safety. He said initial estimates suggested at least 50 others were still missing. India's deputy minister for science and technology, Jitendra Singh, said the floods were triggered by a cloudburst in Jammu and Kashmir's Chositi area and 'could result in substantial casualty'. Chositi is a remote Himalayan village in Kashmir's Kishtwar district and is the last village accessible to motor vehicles on the route of an annual Hindu pilgrimage to a mountainous shrine. Pilgrims are also feared to be affected by the disaster. Officials said the pilgrimage had been suspended and more rescue teams were on the way to the area. Lieutenant Governor Manoj Sinha, New Delhi's top administrator in Kashmir, offered condolences for the loss of life and said he had directed personnel from India's military and paramilitary forces, as well as police and disaster management officials, to strengthen rescue and relief operations. Sudden, intense downpours over small areas known as cloudbursts are increasingly common in India's Himalayan regions. Cloudbursts have the potential to wreak havoc by causing intense flooding and landslides, affecting thousands of people in the mountainous regions. Experts say cloudbursts have increased in recent years partly due to climate change, while damage from the storms also has increased because of unplanned development in mountain regions.


Perth Now
a few seconds ago
- Perth Now
Wall St dips as producer inflation data hits rate bets
Wall Street's main indexes have declined after a hotter-than-expected producer prices report dampened investor expectations of potential interest-rate cuts by the Federal Reserve this year. A Labor Department report showed the Producer Price Index rose 3.3 per cent on an annual basis in July, higher than the 2.5 per cent gain expected by economists polled by Reuters. On a monthly basis, it rose 0.9 per cent compared with an estimated 0.2 per cent rise. Traders lowered their Fed rate-cut expectations for the rest of the year to about 58 basis points, according to data compiled by LSEG, compared with about 63 bps before the report. But they are still fully pricing in a quarter-percentage-point cut in September. "It's sending a mixed message about the economy," said Peter Andersen, founder of Andersen Capital Management in Boston. "We have been too anxious to draw a conclusion that the economy is fine, it's not overheated. But this wholesale data does show that perhaps there is some inflation working and we shouldn't be so quick to conclude that we need to cut interest rates." In early trading on Thursdsay, the Dow Jones Industrial Average fell 164.29 points, or 0.37 per cent, to 44,757.98, the S&P 500 lost 16.84 points, or 0.26 per cent, to 6,449.74 and the Nasdaq Composite lost 22.69 points, or 0.10 per cent, to 21,690.45. Recent data reflecting labour market weakness and a moderate rise in consumer prices had strengthened expectations that the central bank will potentially lower interest rates next month. However, Thursday's report fanned concerns that US tariffs on imports could start to affect prices in the coming months and dampen a rally in US stocks that had helped the benchmark S&P 500 and tech-heavy Nasdaq log record highs over the past two sessions. On Thursday, nine of the 11 S&P 500 sectors declined, with materials, down 1.2 per cent, falling the most. Rate-sensitive small-caps and housing stocks also dropped more than 1.0 per cent each. Separate data showed the number of people in the US filing new applications for jobless benefits fell last week amid low lay-offs. A report also showed San Francisco Fed president Mary Daly pushed back against the need for a 50-basis-point interest rate cut next month, a day after Treasury Secretary Scott Bessent said an aggressive half-point cut was possible. Cisco Systems lost 1.0 per cent after the network equipment manufacturer's broadly in-line forecast did little to encourage investors. Deere & Co fell 8.0 per cent after the farm-equipment maker reported a lower quarterly profit and tightened its annual profit forecast while Tapestry plunged 17.6 per cent after the Coach handbag maker forecast annual profit below estimates. Both companies warned of tariffs affecting their business. Later in the day, investors will also tune into remarks from St Louis Fed President Alberto Musalem, a Federal Open Market Committee voting member this year. Declining issues outnumbered advancers by a 5.05-to-1 ratio on the NYSE and by a 3.38-to-1 ratio on the Nasdaq. The S&P 500 posted four new 52-week highs and no new lows while the Nasdaq Composite recorded 24 new highs and 31 new lows.