Mahindra looks to acquire 350-acre land parcel in Igatpuri in Maharashtra
The Mumbai-based automaker already has manufacturing plants in Nashik and Igatpuri.
"We have submitted a letter of interest for 350 acres of land in Igatpuri, which is part of our ecosystem," Mahindra & Mahindra (M&M) Executive Director and CEO for auto and farm sectors Rajesh Jejurikar told reporters here.
He stated that Nashik and Igatpuri plants could benefit from a feeder facility in the vicinity.
"The land parcel could be used for multiple things, including setting up a supplier park and anything that we may need more for either Nashik or the Igatpuri plant," Jejurikar added.
The company is at a preliminary stage and would have to go through the whole process of due diligence, and then land purchase needs a different level of approval, he noted.
"We still have to go through the process of meeting all approvals, internal and regulatory, before we actually make a decision...So, the whole process is not complete, but the expression of interest is accurate," Jejurikar said.
Mahindra & Mahindra CEO, Automotive Division, Nalinikanth Gollagunta said the company is looking to expand production capacity of its Chakan-based manufacturing by around 2.4 lakh units in the first phase this year.
The overall production capacity of the plant would go up to 7.5 to 7.6 lakh units per year after the expansion.
"We are also exploring setting up greenfield locations to put out the production capacity beyond 2027," Gollagunta stated.
Mahindra has plans to invest over ₹27,000 crore in its automotive business between FY25 and FY27.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Indian Express
2 minutes ago
- Indian Express
Railways plans to roll out Gati Shakti Freight trains for faster cargo movement
Indian Railways Freight Services: Indian Railways (IR) plays a crucial role in transporting bulk commodities which are essential for industry and energy sectors, food grains for national distribution, fertilizers for agriculture, and petroleum products. For long distances, rail transport has been more economical than road transport. It not only reduces overall logistics cost but also enables seamless supply chains across the country. Now, in a bid to boost the logistics sector, the Ministry of Railways is planning to introduce a Gati Shakti Freight train. This new semi-high-speed train will be manufactured at Chennai-based Integral Coach Factory (ICF). 'ICF is planning to introduce Gati Shakti Freight EMU, a semi-high-speed train for e-commerce and FMCG logistics, equipped with advanced container handling systems and crew amenities,' said U Subba Rao, General Manager of ICF, on Friday while addressing the gathering on the occasion of India's 79th Independence Day. The national transporter carries over 1.6 billon tonnes of freight traffic every year. Transporting freight by rail helps cut carbon emissions, lowers fuel costs and eases highway congestion. The freight carried by railways during 2020-21 was 1,233 million tonnes which increased to 1,591 million tonnes during 2023-24 i.e. a growth of 29 per cent. The railways has taken up construction of two Dedicated Freight Corridors (DFC) – Eastern Dedicated Freight Corridor (EDFC) from Ludhiana to Sonnagar (1337 Km) and the Western Dedicated Freight Corridor (WDFC) from Jawaharlal Nehru Port Terminal (JNPT) to Dadri (1506 Km). Out of total 2,843 Km, 2741 Route km (96.4%) have been commissioned and operational, which – carried 1,30,116 freight trains during FY 2024-25. In a written statement in Lok Sabha on July 23, Railway Minister Ashwini Vaishnaw said: 'Indian Railways is working on increasing the capacity of its network through Corridors approach. Corridors like HDN (High Traffic Density), Energy, Minerals and Cement are being implemented on priority.'
Mint
2 minutes ago
- Mint
Airbus Is About to Eclipse a Record That Boeing Held for Decades
(Bloomberg) -- In 1981, the year Airbus SE announced it would build a new single-aisle jetliner to take on Boeing Co., the 737 ruled the roost. The US-made narrowbody, already in use for more than a decade, had reshaped the airline industry by making shorter routes cheaper and more profitable to operate. By 1988, when Airbus began producing its upstart A320, Boeing had built a formidable lead by delivering some 1,500 of its cigar-shaped best-seller. It's taken the better part of four decades, but Airbus has finally caught up: The A320 series is poised to overtake its US competitor as the most-delivered commercial airliner in history, according to aviation consultancy Cirium. As of early August, Airbus had winnowed the gap to just 20 units, with 12,155 lifetime A320-family shipments, according to the data. That difference is likely to disappear as soon as next month. 'Did anyone back then expect it could become number one – and on such high production volumes?' Max Kingsley-Jones, head of advisory at Cirium Ascend, wrote of the A320 in a recent social-media post. 'I certainly didn't, and nor probably did Airbus.' The A320's success mirrors the European planemaker's decades-long rise from fledgling planemaker to serious contender, and finally Boeing's better. By the early 2000s, annual deliveries of the A320 and its derivatives had surpassed the 737 family; total orders eclipsed the Boeing jet in 2019. But the 737 stubbornly remained the most-delivered commercial aircraft of all time. At the outset, Airbus faced an uphill battle. The European planemaker, an assemblage of aerospace manufacturers formed in 1970 with backing from European governments, didn't yet offer a full aircraft lineup. Infighting hindered everything from product planning to manufacturing, and leadership decisions had to finely balance French and German commercial and political interests. Yet it was clear even then that Airbus needed a presence in the narrowbody segment to firmly establish itself as Boeing's top rival. Those aircraft are by far the most widely flown category in commercial aviation, typically connecting city pairs on shorter routes. Higher fuel costs and the deregulation of the US aviation industry in the late 1970s had given the European planemaker an opening with American airline executives, who clamored for an all-new single-aisle, according to a history of Airbus written by journalist Nicola Clark. To set the A320 apart, Airbus took some risks. It selected digital fly-by-wire controls that saved weight over traditional hydraulic systems, and gave pilots a side-stick at their right or left hand instead of a centrally mounted yoke. The aircraft also sat higher off the ground than the 737 and came with a choice of two engines, giving customers greater flexibility. Airbus's gamble paid off. Today, the A320 and 737 make up nearly half of the global passenger jet fleet in service. And the A320's success contrasts with strategic blunders like the A380 behemoth that proved short-lived because airlines couldn't profitably operate the giant plane. Boeing maintained that smaller, nimbler planes like the 787 Dreamliner would have an edge — a prediction that proved right. Yet the longtime dominance of the two narrowbody aircraft raises questions about the vitality of a duopoly system that favors stability over innovation. Both airplane makers have repeatedly opted for incremental changes that squeeze efficiencies out of their top-selling models, rather than going the more expensive route of designing a replacement aircraft from scratch. Airbus was first to introduce new engines to its A320, turning the neo variant into a huge hit with airlines seeking to cut their fuel bill. Under pressure, Boeing followed, but its approach proved calamitous. The US planemaker came up with the 737 Max, strapping more powerful engines onto the aircraft's aging, low-slung frame. It installed an automated flight-stabilizing feature called MCAS to help manage the higher thrust and balance out the plane. Regulators later found MCAS contributed to two deadly 737 Max crashes that led to a global grounding of the jet for 20 months, starting in 2019. More recently, Airbus has been bedeviled by issues with the fuel-efficient engines that power the A320neo. High-tech coatings that allow its Pratt & Whitney geared turbofans to run at hotter temperatures have shown flaws, forcing airline customers to send aircraft in for extra maintenance, backing up repair shops and grounding hundreds of jets waiting for inspection and repair. With both narrowbody families near the end of their evolutionary timeline, analysts and investors have begun asking about what's next. China, for its part, is seeking to muscle into the market with its Comac C919 model that's begun operating in the country, but hasn't so far been certified to fly in Europe or the US. Boeing Chief Executive Officer Kelly Ortberg said in July that the company is working internally toward a next-generation plane, but is waiting for engine technology and other factors to fall into place, including restoring cash flow after years of setbacks. 'That's not today and probably not tomorrow,' he said on a July 29 call. Airbus's healthier finances give it more flexibility to explore design leaps. CEO Guillaume Faury toyed with rolling out a hydrogen-powered aircraft — potentially with a radical 'flying wing' design — in the mid-2030s but has since pushed back the effort to focus on a conventional A320 successor. The Toulouse, France-based company is considering an open-rotor engine that would save fuel through its architecture rather than the current jet turbines that push the limits of physics to eke out gains. Speaking at the Paris Air Show in June, Faury called the A320 'quite an old platform' and affirmed plans to launch a successor by the end of this decade, with service entry in the mid-2030s. 'I have a lot of focus on preparing that next-generation of single aisle,' Faury said. 'We are very steady and very committed to this.' --With assistance from Jinshan Hong. More stories like this are available on
Time of India
9 minutes ago
- Time of India
GST reform: Industry hails PM Modi's slab cut plan; experts see relief for MSMEs and consumers
AI image India's business community has warmly welcomed Prime Minister Narendra Modi's announcement to overhaul the Goods and Services Tax (GST), describing it as a crucial step towards boosting demand, cutting compliance burdens and supporting growth. In his Independence Day address from the Red Fort, PM Modi said the government will simplify the GST framework by reducing the number of tax slabs. The proposal includes scrapping the current 12% and 28% rates, leaving two core slabs, 5% and 18%. Around 99% of items in the 12% category may shift to 5%, while 90% of those taxed at 28% could move to 18%. Positive industry response Pankaj Mohindroo, chairman of the India Cellular & Electronics Association (ICEA), called GST 'an extraordinary reform' and said rationalising slabs would benefit both industry and consumers. 'GST was an extraordinary reform and it was committed that GST would not increase tax on he general public but it has gone up in some pockets like mobile phones and electronics. The overall rationalisation into fewer slabs is very much on the cards because we have to prepare for Viksit Bharat @ 2047... GST reforms will put more money in the pocket of consumers and it will stimulate demand and it will be good for the industry and the consumers,' he was quoted as saying by news agency ANI. Economist Ved Jain said eight years of GST experience make this the right time for a structural change. 'The Prime Minister's announcement was basically that it has been eight years since GST was introduced and we have experience, collections have improved, AI is being used to carry out data analysis... Since we transitioned from VAT to GST, the government was unsure how it would turn out and the collections that would be made, so the government decided to go with four tax slabs- 6%, 12%, 18%, and 28%. After eight years, the number of tax rates must be reduced and there are likely to be two tax rates now- a standard rate between 12-18%, a merit rate, and a demerit rate... There is a structural reform that is required, given our experience", he said. BJP MP and CAIT secretary general Praveen Khandelwal said it would ease pressure on small traders and MSMEs, especially before the festive season. PHDCCI's CEO Ranjeet Mehta added that reforms expected by October would yield long-term benefits. Tax experts quoted by news agency PTI said the overhaul being described as 'GST 2.0', will address inverted duty structures, free up working capital, and make exports more competitive. Industry body CII hailed the move as 'visionary' for ease of doing business and investor confidence. As cited by PTI, EY India's Saurabh Agarwal said it comes at the right time, with GST collections for FY 2025–26 projected to cross Rs 22 lakh crore. Vineet Mittal of Avaada Group said the changes will 'unleash entrepreneurship,' while Assocham highlighted benefits for jobs, skills, and self-reliance. Since its rollout in 2017, GST has unified India's market but faced criticism over rate complexity and compliance challenges. The proposed reform aims to deliver a simpler, fairer, and more growth-friendly tax system. Stay informed with the latest business news, updates on bank holidays , public holidays , current gold rate and silver price .
