logo
Jasper County approves seal coal and microsurfacing plans near Neal Smith

Jasper County approves seal coal and microsurfacing plans near Neal Smith

Yahoo06-02-2025

Feb. 5—Plans to apply seal coat and microsurfacing to roads near Neal Smith National Wildlife Refuge were approved by the Jasper County Board of Supervisors last week, which is all part of the first phase of an accessibility project funded in large part through a Federal Lands Access Program (FLAP) Grant.
According to county documents, the affected roads include West 129th Street South from Iowa Highway 163 to South 96th Avenue West and South 96th Avenue West from West 129th Street South to Pacific Street. County Engineer Michael Frietsch said the streets will be undergoing major upgrades.
"We're going to be taking the road and fixing some box culverts that have broken end sections in there," Frietsch said. "We've got a lot of things that we gotta fix up around the toes and the slopes. We're going to fix the embankments and put guard rail up and basically make safety improvements."
Crews are also going to stabilize the top 12 inches with cement and then put a layer of millings down and a double layer of what is called Otta seal. Normally, when applying a seal coat, contractors put down a layer of oil and then chip. But chip is pricy. So, instead, the county will put down 3/4-inch road stone.
"We're going to let that sit and cure out, and then two weeks later or so we'll put another run of oil on it and we put another layer of 3/4-inch road stone on top of it. Shape it, compact it, get it all rolled in," Frietsch said. "Then the final step beyond this is we're going to put down what is called a microsurface."
Frietsch described the microsurface as a polymer-modified asphalt mixed with some coarse and fine materials that get bladed onto the surface and seals it off.
"It gives it a nice sort of black color, sort of poor mans looking asphalt road, so to speak," Frietsch said. "...This is a method I've seen. Johnson County has done Otta seals and there are other counties that have done Otta seals. They're better than a plain old seal coat."
If it wasn't for all the embankment slope and culvert issues around these roads, Frietsch said this method would come in around $300,000 per mile.
"I think we're probably going to be around the $400,000 to $500,000 per mile range with this project," he said. "So similar to what the Lake Road was — or is."
The second phase of the project includes curing West 129th Street South from South 96th Avenue West to South 102nd Avenue West, and then South 102nd Avenue West over to the Neal Smith National Wildlife Refuge's maintenance shed. A bridge on South 88th Avenue West is also addressed in the third phase.

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Subsurface exploration authorized for third phase of F-48 West project
Subsurface exploration authorized for third phase of F-48 West project

Yahoo

time07-05-2025

  • Yahoo

Subsurface exploration authorized for third phase of F-48 West project

Yahoo is using AI to generate takeaways from this article. This means the info may not always match what's in the article. Reporting mistakes helps us improve the experience. Yahoo is using AI to generate takeaways from this article. This means the info may not always match what's in the article. Reporting mistakes helps us improve the experience. Yahoo is using AI to generate takeaways from this article. This means the info may not always match what's in the article. Reporting mistakes helps us improve the experience. Generate Key Takeaways May 7—Before construction crews even begin working on the third phase of F-48 West — which won't be until fiscal year 2027 at the very least — the Jasper County Board of Supervisors ordered soil borings be conducted for the twin box culverts that will be installed along the heavily traveled county highway. County Engineer Michael Frietsch said the twin box culverts would be located near the first curve east of Polk County. Currently, the plan is to replace Bridge O10 with culverts. To determine what the underlying substructure is like, soil borings must be collected. TEAM Services of Des Moines will carry out the work. Altogether, the soil borings will cost the county $4,980. According to the contract included in the supervisors agenda, the two soil borings will be drilled to a depth of about 25 feet below the existing grades. The borings cannot be drilled within the stream area with a geotechnical drilling rig. Instead, they will be drilled alongside the nearby stream. The third and final phase of the F-48 West resurfacing project extends from Colfax to Mitchellville. In addition to the road work and the bridge being replaced, a curve will also be relocated. The curve will be moved northwest, making the final product even wider. Design services have already been approved. The county will have to acquire 6.3 acres of right-of-way easement and vacate about 9.2 acres to relocate the curve. When the county vacates the old curve, Frietsch said the road surface will be taken out during the construction phase and then crews will restore the ground back to agriculture land. The concrete will likely be hauled off by the contractor to a landfill or reuse it as riprap provided there isn't any rebar.

Parking machines covered amid move to cashless
Parking machines covered amid move to cashless

Yahoo

time26-04-2025

  • Yahoo

Parking machines covered amid move to cashless

A number of a town's parking machines have been covered up ahead of their removal as part of an equipment upgrade. Reading Borough Council said 75 new pay and display machines will be installed around the Berkshire town over the coming weeks. The machines will allow cashless payments only for on-street parking, using banks cards or mobile payment apps, including the existing RingGo system. Phil Grant, Reading Borough Council's parking services manager, said he believes the changes will save £35,000 per year. The transfer to cashless-only payments began on 1 March, after council committee approval on 20 January. Charges apply to parking in all council car parks, on-street parking bays, as well as long-term parking permits. The authority said it currently costs £10.67 per cash collection from each machine, amounting to £1,600 a month, which would be reduced to £350 per month under the cashless system, saving the council £15,000 per year. According to a report by Mr Grant, maintaining each current machine costs the council £266.66 a year - adding up to a total cost of about £44,000 annually. The new machines will not issue paper tickets but parking enforcement officers will be able to check payments have been made electronically. The local authority said machines will still accept cash in some areas where "there is proven high demand for this", such as around the Royal Berkshire Hospital. The move is part of wider parking reforms by the council, including possible emission-based parking tariffs and reducing the number of pay and display machines from 168 to approximately 75. A six-week statutory consultation on a proposal for emission-based parking charges closed on 30 March, with a final decision due to be made by the authority's traffic management subcommittee on 11 June. You can follow BBC Berkshire on Facebook, X (Twitter), or Instagram. Parking meter vandalised after charges introduced Meters vandalised hours before park charges begin Parking charges to increase for town's polluting cars More than 20 councils moving to cashless parking RingGo Reading Borough Council

Engineer's office continues its focus on trainings for staff members
Engineer's office continues its focus on trainings for staff members

Yahoo

time22-04-2025

  • Yahoo

Engineer's office continues its focus on trainings for staff members

Apr. 22—Additional training was received by the engineer's office to ultimately save money in the long run. Training primarily revolved around AutoCAD, a computer-aided design software developed by Autodesk. The software is widely utilized for 2D and 3D drawings and models in engineering and public works fields. Jasper County Engineer's Office staff were authorized by supervisors to receive custom civil 3D training and mentoring from Rand Worldwide Subsidiary, doing business as IMAGINiT Technologies. County Engineer Michael Frietsch provided the proposal to supervisors on April 8. The two-day training costs $4,680. "A day-and-a-half is more of a standard sort of going over things and then a half-day of going over specifics," he said. "What's going on is as machine control becomes more and more in use by these contractors, the need to make sure our files that we provide them are cleaned up to their level ... is getting higher." Trainings could help engineer's office leadership understand what needs to be done on the front end of various projects. In the end, Frietsch said staff will be able to provide a product to a contractor and not have to pay more money to an outside consultant or survey company to clean it up. "That's kind of the goal is to help us understand what we need to do to be able to get a clean file out the door and ready to use by the contractor," Frietsch said. Supervisor Brandon Talsma asked Frietsch if he felt the training was worth the investment. Frietsch said yes, and he noted the training is not something his office would pay for or solicit for every year. The engineer's office has not done any formal training in the three-and-a-half years he has been here. He said, "This will be a worthwhile thing for each of the guys and myself to kind of go through so that we know what we're looking at and know what we're doing." The secondary roads department has now received at least two different types of training in the past few months. In February, the board of supervisors hired a company to carry out multi-day, hands-on motor grader training. Altogether, that training cost less than $20,000 for secondary roads staff.

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into the world of global news and events? Download our app today from your preferred app store and start exploring.
app-storeplay-store