Pixel 10 series official cases surface ahead of launch
The official Pixel 10 cases appear largely similar in design to the Pixel 9 cases, including the soft lining on the inside. However, a new ring element is seen on the inner side with a Pixel logo. This is likely because the new Pixel phones are rumored to support Qi2 wireless charging and feature inbuilt magnets.
Pixel 10 series will also be offered in new colors, and the cases match them. The Pixel 10 cases will be available in Indigo, Obsidian, Limoncello, and Frost options.
The Pixel 10 Pro and 10 Pro XL cases are seen in the expected Moonstone, Jade, and Porcelain colors. Google will also offer a black case for the Obsidian variant of the phones.
The new Pixel 10 series cases are expected to work along with the Pixelsnap range of accessories that are rumored to launch alongside the phones. Google Pixel 9 Pro XL
Google Pixel 10 series including the Pixel 10 Pro Fold is set to launch on August 20 at a Made by Google event. We should also see Google unveil the Pixel Buds 2a and the Watch 4.
Source
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
GSM Arena
2 hours ago
- GSM Arena
vivo G3 is official with 6,000 mAh battery
vivo has made the G3 official today as the successor to the G2 from January 2024. The phone comes with a 6.74-inch 720x1600 LCD screen with 90 Hz refresh rate, a 13 MP rear camera, a 5 MP selfie camera, and a 6,000 mAh battery with support for 44W wired charging. It's powered by the MediaTek Dimensity 6300 SoC, paired with 6/8GB of RAM and 128/256GB of storage. It measures 167.3 x 76.95 x 8.19 mm and weighs 204g. It has a side-mounted capacitive fingerprint scanner embedded into the power button. It's offered in China in black only for CNY 1,499 (approximately $208) with 6GB of RAM and 128GB of storage and CNY 1,999 ($278) with 8GB of RAM and 256GB of storage. It's unclear if it will ever be sold elsewhere.
Phone Arena
5 hours ago
- Phone Arena
China introduces its first domestically made e-beam lithography machine
We've often said that the inability of Chinese foundries and tech manufacturers to obtain Extreme Ultraviolet (EUV) lithography machines is the big reason why China is so far behind in the chips race. Thanks to U.S. and Dutch officials, the one company that makes advanced lithography gear, Dutch firm ASML, cannot ship the latest EUV lithography equipment to China. However, less advanced Deep Ultraviolet (DUV) lithography machines, using older technology, can still be shipped to China. This is important because EUV machines are needed to manufacture chips under 7nm. Foundries like TSMC and Samsung Foundry will be mass producing chips using their 2nm process nodes this year. Lower process node numbers mean that the transistors used are smaller, allowing more to fit into a small space inside a chip. This number is called the Transistor Density and is usually shown as millions or billions of transistors per square millimeter. The higher the transistor density, the more powerful and energy-efficient a chip is. The lithography machine is used to transfer circuitry patterns onto the silicon wafers that serve as the foundation of the chips manufactured by foundries. Deep Ultraviolet (DUV) light has a wavelength of 193 nanometers. EUV, however, uses light with a wavelength of just 13.5 nanometers, which is about 14 times shorter. This shorter wavelength allows EUVs to etch the fine patterns needed for today's intricate chip designs. -Hangzhou Daily But the Chinese have built their first e-beam lithography machine, which they have titled Xizhi. It was created at Zhejiang University in Hangzhou and uses focused electron beams to etch the circuitry patterns on the silicon wafers. The downside is that e-beam lithography cannot produce chips at a large scale like DUV and EUV machines can. But for China, it's any port in a storm when it comes to lithography, and the e-beam lithography works great during the testing phase of production. An ASML built Extreme Ultraviolet lithography machine. | Image credit-ASML A local newspaper, Hangzhou Daily , said on Thursday, "Due to export controls, such equipment has long been out of reach for leading domestic research institutions, including the University of Science and Technology of China and Zhejiang Lab. The delivery of Xizhi is expected to help break this impasse." Xizhi can etch circuit lines as narrow as 8 nm, with a positioning accuracy of 0.6nm. This meets international standards. Discussions with Chinese companies and research institutes interested in Xizhi have begun. The domestically produced e-beam lithography machine is cheaper than similar devices imported into China. This is just the beginning of China's attempt to bypass U.S. restrictions by producing its own chipmaking equipment. There are reports that Huawei has been working on building its own EUV machine. Reportedly, Huawei has been testing a trial EUV machine at its factory in Dongguan. Supposedly, Huawei will aim for trial production later this year with mass production expected to take place in 2026. Should Huawei be able to create an EUV machine, it would be a big deal for China in general and Huawei in particular. It could allow Huawei and China's largest foundry, SMIC, to produce cutting-edge chips that might be able to compete with the silicon designed by U.S. chip design heavyweights like Apple, Qualcomm, and Nvidia. Before the U.S. implemented the sanctions preventing Huawei from obtaining cutting-edge chips, the Chinese manufacturer's HiSillicon chip design unit was TSMC's second-largest customer after Apple. At that time, HiSilicon and thus Huawei had access to TSMC's most cutting-edge process nodes. In fact, the last chip TSMC produced for HiSilicon before U.S. sanctions kicked in was the Kirin 9000 AP. Built using TSMC's 5nm process node, this was the SoC used to power the Huawei Mate 40 series in 2020. After the sanctions went into effect, Qualcomm was given a license from the U.S. Commerce Department allowing it to ship 4G Snapdragon chips to Huawei. In 2023, Huawei stunned the industry by releasing the Mate 60 series powered by the Kirin 9000S. Produced by SMIC, the SoC was built using the foundry's 7nm process node and brought 5G support back to Huawei's flagship phones. With Galaxy AI – port-in & $720 upfront required We may earn a commission if you make a purchase Check Out The Offer
Phone Arena
9 hours ago
- Phone Arena
Apple accidentally leaks some of its upcoming products
Apple does not like leaks. Its lawsuit against FPT's Jon Prosser, accused by the tech giant of getting access to a developmental iPhone 17 model owned by an Apple employee, makes this crystal clear. But the reason for Apple's anger might not be as clear. You see, Apple apparently wants to get into the "Apple Leaks" business itself and hopes to shut down a competitor (Prosser). Apple itself just accidentally leaked several new products and while this paragraph was written with tongue-in-cheek, the rest of this story is true. According to the report, Apple slipped up and included code used to identify hardware in software code that linked to several unannounced products. One of the products is a new HomePod mini carrying a codename of B525. This tracks perfectly since the current HomePod mini sports a codename of B520. The new HomePod mini will use the same T8310 microarchitecture deployed on the Apple Watch. The Apple HomePod mini, released in 2020. | Image credit-Apple The Apple Watch Series 9 and Series 10 both use the T8310 core architecture. It is also expected to be used with the S11 chip that will run the Apple Watch Series 11, scheduled to be unveiled next month. This indicates that a new chip will replace the S5-class chip that is used with the currently offered HomePod mini model that was released in 2020. The new chip will reportedly have a 64-bit dual-core CPU based on the A16 application processor (AP). It will also feature a four-core Neural Engine, which is something that the chip inside the current HomePod mini doesn't have. The HomePod mini 2 could be released this year anytime between next month and the end of 2025. Among the unannounced new products that Apple leaked is a new Apple TV powered by the same A17 Pro AP that powers the iPhone 15 Pro and iPhone 15 Pro Max. The updated silicon would be a nice improvement from the A15 Bionic currently found in the current Apple TV product. The new chipset will bring Apple Intelligence support to Apple TV and will also allow the product to run console-tier games with the quality graphics such games deserve. The company is supposedly testing its own Bluetooth/Wi-Fi chip to use with the product. The new Apple TV unit could be released as soon as next month at the earliest; it is expected to see the light of day sometime this year. A new iPad mini (J510/J511) was one of the products leaked by Apple. It is expected to feature the powerful new A19 Pro AP which will be the silicon inside the upcoming iPhone 17 Pro and iPhone 17 Pro Max. The last iPad mini was released last October, employing the A17 Pro. Apple is supposed to be working on a new iPad mini with an OLED display for 2026 or possibly 2027. This could be the model leaked by Apple. The A19 Pro AP that could run this device has more GPU cores than the A19 SoC. There could be a binned version of the A19 Pro with just one less GPU core, which might be found inside the upcoming ultra-slim iPhone 17 Air. A binned chip is one that was not perfectly produced and, as a result, it was placed in one of various bins based on its flaws. This is done so that chips not perfectly produced don't have to be thrown out and can be employed. A new entry-level iPad (J581/J582) was also leaked by Apple, and the product will get a chip boost from the A16 used on the current entry-level Apple tablet to the A18. Expected next spring, the new low-end iPad should support Apple Intelligence and feature a 16-core Neural Engine. The chipset might be new, but the design of the tablet will reportedly stay the same. The new Apple Watch Series 11 , Ultra 3, and Watch SE 3 were included in the leak, and Apple is expected to use the S11 System in Package (SiP) chip to power its upcoming timepieces. With the same T8310 architecture used with the S9 and S10 SiP, the S11 could carry two performance cores, a 64‑bit dual‑core CPU, and a 4‑core Neural Engine. Other devices accidentally leaked by Apple include: Vision Pro 2-powered by M5 chip, replacing the M2 used in the first version of the spatial computer. We could see a late 2025 release. Apple Studio Display 2-with a possible mini‑LED backlight. This might be launched early next year. Which of the above leaked Apple products would you be interested in? With Galaxy AI – port-in & $720 upfront required We may earn a commission if you make a purchase Check Out The Offer
