MQ-28 Ghost Bat Is Of 'Strong Interest' To The U.S. Navy
Asked by TWZ about what the Navy is seeking to get from the MQ-28, and its wider goal for the platform, Capt. Ron Flanders, Public Affairs Officer at the Office of the Assistant Secretary of the Navy for Research, Development & Acquisition (RDA), said:
'The partnership between the United States and Australia on the MQ-28 represents a new model of joint development, where allied nations co-design and co-produce high-end military capabilities. The U.S. has expressed strong interest in leveraging the MQ-28's AI-driven autonomy and modular design for future air combat operations.'
The joint development of high-technology military hardware, as referenced in the first part of this response, is not restricted to the MQ-28, of course, and there are already other big-ticket programs involving U.S. and Australian collaboration.
The second part of the answer is somewhat more intriguing, since it does suggest that the Navy may well also be looking seriously at how it might be able to leverage the MQ-28 — and related technologies.
It only emerged in 2019 that Australia was working together with Boeing on the MQ-28, originally referred to as the Airpower Teaming System (ATS). The first flight of one of these drones occurred in 2021. Meanwhile, three Ghost Bat prototypes are known to have been built and flight-tested in Australia.
As it now stands, Boeing is planning to build the MQ-28 in Queensland, Australia, and provide them to the Royal Australian Air Force (RAAF), as an important part of the service's future plans.
As of 2022, the RAAF said it wanted to acquire at least 10 MQ-28s by the end of 2025, at which point it would begin flying them operationally. Last month, Boeing provided an update on the program, pointing to plans for a series of flight-test demonstrations later this year, which will include MQ-28s teaming with crewed assets, such as E-7 Wedgetail and F-35 stealth fighter, to complete operationally relevant missions. As of March of this year, the test team had recorded 100 test flights.
Meanwhile, the U.S. Air Force has also said it will make use of a Ghost Bat for testing purposes, with the design serving as what it describes as a 'technology feeder' for the service's CCA program.
In February of last year, the Australian Department of Defense disclosed that it had 'signed a CCA development project arrangement with the United States on 30 March 2023.' While this was widely presumed to relate to the Air Force CCA program, it could also refer to the Navy effort.
However, while the U.S. Air Force has now chosen its two CCA designs —at least competing for Increment 1 of that effort — the U.S. Navy is taking a more circumspect approach, as we discussed in depth only recently.
At this point, it's also worth noting that Increment 2 of the Air Force's CCA effort could be the first to include foreign participation, something the service has confirmed in the past. This could well provide another opportunity for the MQ-28 with the Air Force.
Meanwhile, the Navy still plans to develop and field carrier-based CCAs that will work alongside the service's fighter aircraft in a force-multiplying role, but, for the time being at least, the service is focusing more on its MQ-25 Stingray tanker drone, and its supporting infrastructure, while allowing the other services, especially the U.S. Air Force, to prove out the CCA concept.
It's this approach that makes the Navy's statement on the MQ-28 all the more interesting, suggesting that the Ghost Bat could find a way into the service's CCA thinking.
On the other hand, there is evidence that the Navy is currently interested in cheaper and more disposable CCAs than the Air Force, which is pursuing a much higher-end capability with unit costs in the tens of millions. That would appear to count against the MQ-28, which is a larger and more expensive design.
Boeing has already pitched the MQ-28 for carrier-based applications, with a rendering of a variant or derivative of the drone with a visible tail hook shown landing on a carrier in a briefing put together by the Royal Navy in the United Kingdom. Boeing subsequently confirmed that this was a company image, and as such could be intended for the U.S. Navy, too.
.@RoyalNavy briefing on future unmanned rotary capabilities at #IMHelicon, but note the carrier landing MQ-28 Ghost Bat… #drone #drones pic.twitter.com/RQhjMAzNRx
— Gareth Jennings (@GarethJennings3) February 21, 2023
'We are studying future options to meet the forecast capability requirements both locally and internationally,' Boeing told TWZ in 2023, in response to questions about this particular development. 'We cannot disclose specific variant details.'
Overall, the design of the MQ-28 emphasizes a high degree of modularity, including a rapidly swappable nose section. It also make extensive use of open-architecture mission systems, as you can read more about here. Should the U.S. Navy — or another customer — decide to pursue the development of a carrier-based MQ-28, these factors would make that process easier.
Whether it's the Navy or the Air Force, TWZ has previously laid out a detailed case for how the trilateral Australia-United Kingdom-United States (AUKUS) defense cooperation agreement, specifically, could provide an ideal framework for cooperation on the Air Force CCA program, and the same applies to the Navy's version of the same program, or another adjacent effort.
There is also emerging evidence indicating that the U.S. Navy is already involved in the MQ-28 test program as it seeks to define its CCA requirements.
An official biography of Cdr. James Moore Licata, callsign 'Two Times,' states that, in February 2023, he reported to the 'Ghost Wolves' of Air Test & Evaluation Squadron 24 (UX-24) at Webster Naval Outlying Field, Maryland, to assume the role of Government Flight Test Director for Advanced Development efforts.
Here, Licata 'served as the military Test and Evaluation lead for U.S. Navy Collaborative Combat Aircraft (CCA) and the U.S. Navy's principal test representative in the CCA Development Project Arrangement between the United States and Australian governments.'
Licata left that assignment in February of this year, joining Air Test & Evaluation Squadron 31 (VX-31) at China Lake, California, as Chief Test Pilot.
While the biography doesn't mention MQ-28 by name, the description of a 'CCA Development Project Arrangement' involving the U.S. and Australian governments suggests that Ghost Bat would have been at least a major focus of that effort.
The U.S. Navy and RAAF also operate the MQ-4C Triton high-altitude long-endurance drone, providing further options for cooperation in the uncrewed realm. On the other hand, the Australian government specifically refers to the MQ-28 as a CCA, something that would not apply to the Triton, for example.
It's also worth noting that an MQ-28 has been in the United States for some time, for testing, and this and the MQ-25 demonstrator have been sighted together at MidAmerica Airport outside of St. Louis, Missouri. As you can read about here, the first photos of a Ghost Bat in the United States, which were published by Boeing in 2023, showed the two drones side-by-side at this location, also pointing to potential crossover with the Navy's MQ-25. In particular, the MQ-25 program will feed into Navy CCA efforts in terms of developing the infrastructure required to operate fixed-wing drones on a regular basis from carrier decks.
TWZ has reached out to the Australian Defense Department's representative in Washington, DC, to find out more about the Navy's relationship with the MQ-28.
However, the U.S. Navy is clearly looking at the MQ-28, even if only on a test and evaluation basis. However, based on the versatility of the design and the fact that Boeing has already explored, at some level, what it would take to make it carrier-compatible, the drone could well be of deeper interest to the Navy as it sets about defining its CCA requirements.
Contact the author: thomas@thewarzone.com
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
19 minutes ago
- Yahoo
Boeing continues to recover as tariffs and another workers strike loom
This story was originally published on Manufacturing Dive. To receive daily news and insights, subscribe to our free daily Manufacturing Dive newsletter. Boeing continues to recover as the company's second quarter revenue surged approximately 35% year-over-year to roughly $22.7 billion, reflecting higher commercial plane delivery volume, according to an earnings release Tuesday. Net losses for the quarter dropped nearly 58% to $612 million, compared to $1.4 billion YoY. Additionally, the plane manufacturer has rebounded financially in the first half of the year, with revenue for the first six months increasing 26.4% to $42.3 billion compared to the same period last year. Commercial plane deliveries from H1 have also surpassed distribution numbers YoY. Boeing delivered 280 aircraft, making it the most deliveries in Q2 and the first six months of the year since 2018, President and CEO Kelly Ortberg said during an earnings call Tuesday. The company delivered 194 commercial planes in the second quarter and 378 commercial units in the first six months of 2018. 'It's clear our recovery plan is taking hold,' Ortberg said. 'We're making steady progress to stabilize our business, strengthen development program execution and change our culture to set up for the future.' Stabilizing to increase commercial plane production Earlier this month, the National Transportation Safety Board released its final report, which found that the plane maker failed to provide 'adequate training, guidance and oversight' to its factory workers, leading to the mid-exit door plug on Alaska Airlines that blew out midair on Jan. 5, 2024. The incident led the Federal Aviation Administration to cap Boeing's 737 production at 38 planes a month. Since last year's Alaska Airlines incident, Boeing has spent billions of dollars to fix its production woes and the company is seeing the benefits of its ongoing investments in stabilizing its production system, Ortberg said. The company has been using key product indicators to measure the stability of its production system, which are part of Boeing's safety and quality improvement plan it submitted to the FAA last year. The manufacturer progressively increased 737 production over the past year, finally reaching 38 units per month in Q2. Ortberg highlighted Boeing's recent actions to improve its processes, including reducing traveled work by 50% and addressing employee feedback from its safety and quality standdowns, the CEO added. Additionally, Boeing engaged in structured on-the-job training as well as 'simplified' 1,500 work instruction documents. Moreover, the company aims to shut down its shadow factory in Q3. The plane manufacturer has also implemented KPIs for its other commercial aircraft in an effort to stabilize operations and increase production rates. The KPIs are being used at Boeing's 787 Dreamliner facility in Charleston, South Carolina, where the production rate is seven units per month, Brian West said during his last call as the company's CFO and finance EVP. Boeing announced last year that it's investing $1 billion to expand and upgrade two 787 Dreamliner campuses in North Charleston, South Carolina, as it aims to ramp up manufacturing to 10 planes a month by 2026. 'This is critical to our performance to deliver safe and high-quality aircraft on time to our customers and steadily execute our planned production increases,' Ortberg said. Boeing anticipates being in a position to request approval from the FAA to increase production to 42 aircraft per month in the coming months. Despite the 'good progress,' the company still has a lot of work to do, Ortberg said. Boeing also made executive changes recently. West will become a senior advisor to Ortberg, with Jesus 'Jay' Malave, former CFO of Lockheed Martin, succeeding him, effective Aug.15. Boeing also named Stephen Parker as president and CEO of its Defense, Space, and Security business, effective immediately. Parker served as the segment's interim head since Ted Colbert left the company in September 2024. Mitigating tariffs The company expects to incur less than $500 million in tariff impacts, Ortberg said. While Boeing's finances are on the upswing, the recovery could be impacted by tariffs if deals are not reached by the Aug. 1 and 12 deadlines, according to a securities filing. Approximately 80% of its commercial supply chain spending is allocated to suppliers in the United States, and around 80% of its commercial deliveries are made to customers outside the U.S., Ortberg said. Nevertheless, the company is encouraged by some of the bilateral trade agreements recently announced, including the U.S. deal with the European Union, West said. The two countries agreed to zero-for-zero tariffs on 'a number of strategic products,' including aircraft and component parts. Another relevant deal is the U.S. agreement with Japan, as one of Boeing's key areas is the equipment the company imports from Japan. The pact includes provisions for increased U.S. energy and aerospace exports. Additionally, the White House stated that Japan is expected to purchase 100 Boeing aircraft. However, Boeing is monitoring the trade environment, particularly with Canada, Mexico and Italy concerning its suppliers. The company is also closely tracking negotiations with China, as the country is a significant market for Boeing's commercial aircraft. While the U.S. and China reached an agreement last month, the deal has yet to be finalized. Still, Ortberg doesn't expect to see additional tariffs going forward. 'As a leading U.S. exporter, ongoing free trade is important to our business,' Ortberg said. 'Our top priority is promoting continuity of supply, and we're working across the supply chain to ensure suppliers are focused on meeting the strong market demand.' Another pending strike on the defense side Boeing may face another workers' strike later this month, this time at its fighter jet facilities in St. Louis and St. Charles, Missouri; and Mascoutah, Illinois. Boeing and the International Association of Machinists and Aerospace Workers District 837 initially reached a tentative agreement last week in which the labor union voted to reject the offer, according to the machinists website. The current contract expired July 28 and is followed by a seven-day cooling-off period before a strike would begin Aug. 4. Boeing and IAM District 837 resumed negotiations on Thursday and the company proposed its 'last, best and final offer' that withdrew alternative workweek schedules, added a reward for good attendance at $0.50 an hour, and a $5,000 bonus if the contract is ratified by the end of Sunday. If the union votes to reject the offer, Boeing said it'll withdraw the $5,000 ratification bonus. IAM District 837 will vote on Boeing's modified offer on Sunday. If the union votes to reject the proposal, a strike will begin the following day. 'We've activated our contingency plan and are focused on preparing for a strike,' Boeing said in a July 27 statement. Ortberg said that if a strike occurs at its Missouri and Illinois facilities, the company will manage through it, since the employee numbers there are significantly smaller than at its Washington and Oregon sites. The company experienced a nearly two-month work stoppage last year due to 33,000 IAM District 751 and W24 workers striking at the company's commercial aircraft facilities on the West Coast, contributing to a significant loss of $11.8 billion in 2024. Editor's note: The story has been updated to include information regarding Boeing's modified offer. Recommended Reading Boeing's inadequate training and oversight led to doorplug blowout: NTSB Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
29 minutes ago
- Yahoo
Boeing makes new contract offer to St. Louis defense workers
By Dan Catchpole (Reuters) -U.S. planemaker Boeing sent a new contract offer on Thursday to the union representing roughly 3,200 factory workers at Boeing's defense division, mostly in the St. Louis area. It contains some minor compensation changes that would benefit senior union members, the company said. The offer also keeps current overtime policies, which Boeing had proposed modifying in the last contract offer. If the contract is not passed by Sunday, a $5,000 lump sum bonus will not be offered again, according to Boeing. Members of the International Association of Machinists and Aerospace Workers overwhelmingly rejected a contract offer from Boeing on Sunday. The offer sent to members of IAM District 837 included a 20% general wage increase over four years, the bonus, and more vacation time and sick leave. That offer was insufficient, the IAM union said at the time. 'We have carefully considered and responded to the feedback from our employees and the union," Dan Gillian, a Boeing vice president, said in a statement. He called the contract "the richest we've ever proposed for IAM 837." The IAM declined to comment. The workers assemble Boeing's fighter jets and the MQ-25, an aerial refueling drone being developed for the U.S. Navy. Boeing's defense division is expanding manufacturing facilities in the St. Louis area for the new U.S. Air Force fighter, the F-47, after it won the contract this year. The Next Generation Air Dominance fighter jet program, initially conceived as a "family of systems" centered around a sixth-generation fighter jet, is meant to replace the F-22 Raptor. Solve the daily Crossword
Yahoo
an hour ago
- Yahoo
Glencore copper equivalent production grows 5% in H1 2025
Glencore has reported a 5% year-on-year (YoY) rise in copper equivalent (CuEq) production in the first half of 2025 (H1 2025). The growth was primarily attributed to the inclusion of steelmaking coal volumes from Elk Valley Resources (EVR), which Glencore acquired in July 2024. Steelmaking coal production totalled 15.7 million tonnes (mt). Own-sourced copper production stood at 343,900 tonnes (t) in H1 2025, a 26% slump YoY, mainly due to lower head grades and recoveries. The recoveries contributed to the reduced outputs from Collahuasi, Antapaccay, Antamina and KCC. Conversely, cobalt production saw a 19% increase to 18,900t in H1 2025, largely due to higher grades and volumes at Mutanda. Zinc production experienced a 12% uplift, with 465,200t produced. This was mainly due to higher grades at Antamina and increased production at McArthur River. Nickel production faced a 7% decline, with Murrin Murrin's maintenance downtime impacting results. The company's ferrochrome production was reduced by 28% to 433,000t. This was a strategic response to smelting conversion margin pressures, leading to the suspension of operations at the Boshoek and Wonderkop smelters. Energy coal production remained steady at 48.3mt, with stronger Australian production offsetting cuts at Cerrejón. Glencore CEO Gary Nagle said: 'A comprehensive review of our industrial asset portfolio during the period recognised opportunities to streamline our industrial operating structure, to optimise departmental management and reporting, and to support enhanced technical excellence and operational focus. 'This review also identified c.$1bn of cost savings opportunities (against a 2024 baseline) across our various operating structures, which are expected to be fully delivered by the end of 2026. H2 2025 is expected to already generate significant cost savings resulting from these initiatives – further details will be provided in our half-year results on 6 August.' Glencore has revised its full-year forecast for 2025, narrowing the expected copper production range to 850,000–890,000t from the previous estimate of 850,000–910,000t. It also revised its long-term EBIT (earnings before interest and taxes) guidance range to $2.3bn (SFr1.87bn)–$3.5bn per annum, from the $2.2bn–$3.2bn in place since 2017. The revision was influenced by the sale of Viterra to Bunge, growth in core businesses and inflationary pressures. The company also said it invested approximately $1.1bn into non-RMI (readily marketable inventories) working capital in H1 2025, focusing on high-return commodity pre-pay and lending opportunities. Glencore's Ferroalloys business has indefinitely suspended operations at the Boshoek and Wonderkop smelters until the ferrochrome market has sufficiently recovered, and is undertaking maintenance at the Lion smelter. "Glencore copper equivalent production grows 5% in H1 2025" was originally created and published by Mining Technology, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site.
