Aston Bay and American West Metals Announce Drilling Preparations Underway at the Storm Project, Nunavut, Canada

Associated Press

a day ago

Camp opening and logistics have commenced with geophysics and drilling to follow in the coming weeks
Highlights:
Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Laboratory assays are required to determine the presence and grade of any contained mineralization within the reported visual intersections of copper sulfides. Portable XRF is used as an aid in the determination of mineral type and abundance during the geological logging process.
TORONTO, ON / ACCESS Newswire / June 12, 2025 / Aston Bay Holdings Ltd. (TSXV:BAY)(OTCQB:ATBHF) ('Aston Bay' or the 'Company') is pleased to announce the commencement of activities at the Storm Copper Project ('Storm' or the 'Project') on Somerset Island, Nunavut. American West Metals Limited ('American West'), the Project operator, is conducting the exploration program. Aston Bay and American West have formed a 20/80 unincorporated joint venture with respect to the Storm Project property, with Aston Bay maintaining a free carried interest until a decision to mine is made upon completion of a bankable feasibility study.
Thomas Ullrich, Chief Executive Officer of Aston Bay, commented:
'We are excited to begin another field season at Storm. The reverse circulation drill rig will work on adding to the resource and target near-surface exploration targets, while the diamond drill rig will focus on the deeper exploratory holes.
'In addition to the compelling targets generated in previous geophysical programs, we are very excited to be flying a comprehensive MobileMT survey at Storm. This is the same survey that has successfully delineated large conductive targets at our Epworth property. The significant contrast in the conductive properties of the mineralized rock versus the host rock at Storm is ideal for MobileMT, and its utilization of natural-source energy from within the Earth should help define deeper targets that may have eluded previous methods. These new targets will be ready for drilling this season.
'Investors can also look forward to the completion of a Preliminary Economic Analysis for the near-surface mineralization at Storm, currently underway. We are also working up drill targets for our Epworth copper project, also in Nunavut, for a potential late-season drill program.'
Figure 1: A photo of interpreted copper sulfides/oxides (green) on the surface at the Chinook Deposit, Storm Project, Nunavut. The material has not been assayed.
INITIAL DIAMOND DRILL PLAN
The first diamond drill targets to be tested in the Storm MRE area are Cirrus Deeps and Cyclone Deeps (Figure 2). The drilling aims to follow up earlier intersections of high-grade copper mineralization and build evidence for the large-scale copper potential at depth, which could rapidly expand the copper endowment within the Storm MRE area.
Subsequent diamond drilling will continue to test high-priority geophysical anomalies and regional exploration targets. These will include the Tornado, Blizzard, Midway areas and any new targets defined by the upcoming MMT survey.
Figure 2: Plan view of the Storm area showing the high-priority (initial drilling) areas with potential for further growth of copper mineralization based on drilling, geochemical sampling and geophysics, overlaying copper deposit outlines, and topography.
Cirrus Deeps
Diamond drill hole ST24-03 was designed to target a 1,300m x 500m MLEM anomaly (Figure 3 & 5) which is bounded by a series of large EM plates (approximately 350m to top, conductance ~40-60 siemens, moderate ~40-60° S/SW dip, striking ~WNW-ESE) at its northern edge. The EM anomalies are located below the Cirrus Deposit and the Gap high-grade copper prospect, and are interpreted to be proximal to the Southern Graben Fault.
This location in the Allen Bay Formation immediately below the Cape Storm Formation is the same stratigraphic location as Cyclone. In addition to the potential for flat-lying stratigraphic mineralization like Cyclone, the target is located along a fault zone similar to the well-mineralized Chinook Deposit. These anomalies may indicate a considerable, connected accumulation of copper within the Central Graben area. Similar EM targets drilled elsewhere in the Storm copper belt have been confirmed as high-grade copper mineralization.
Figure 3: NE-SW geological section view through ST24-03 (looking NW) showing the Cirrus Deposit, interpreted Southern Graben Fault and modelled MLEM conductors. The planned drill hole depth is 650-700m.
ST24-03 has currently been drilled to a downhole depth of 414m (planned depth of 600-700m) and intersected several zones of fracturing and sporadic copper sulfides (Figure 3) in the upper portion of the hole, with increased fracturing at depth. Fracturing and voids in the rock are positive indications since permeability and open spaces are required for efficient mineralization in the sediment hosted copper model.
The drill hole will be the first diamond hole completed in the 2025 drill program.
Cyclone Deeps
High-grade copper mineralization has been discovered at depth, offset to the south of the Cyclone Deposit (Figure 4). The Cyclone Deeps intersection of 10m @ 1.2% Cu (drill hole ST24-01) displays a typical sediment hosted copper mineralogical profile with a high-grade core of native copper and chalcocite (including 3m @ 2.2% Cu) with peripheral chalcopyrite and other less copper-rich sulfide minerals.
The copper mineralization is hosted near the top of a thick sequence of fractured dolomudstone of the Allen Bay Formation. The Allen Bay is the main host of the known copper mineralization within the Storm area, and the stratigraphic position near the top of the formation also hosts Cyclone, the largest deposit discovered to date. This mineralization may represent the offset southern portion of the faulted Cyclone Deposit and presents an exceptional opportunity to add significant volume to the current resources. This prospective horizon extends for over 5km in the immediate Storm area.
Figure 4: Schematic geological section at 464730E. The mineralization intersected by ST24-01 is immediately below the Cape Storm Formation, similar to the Cyclone Deposit.
INITIAL REVERSE CIRCULATION DRILL PLAN
Reverse Circulation ('RC') drilling will be used to test near-surface (<250m depth) resource upgrade, resource expansion, and exploration targets.
The first phase of drilling will commence at the Thunder, Lightning Ridge, and Corona Deposits before moving on to The Gap, Squall and Hailstorm Prospects (Figure 2). All of these opportunities have the potential to add significant mineral resources to the Storm Project, with high-grade mineralization similar to the known deposits already discovered.
Subsequent RC drilling will aim to test other nearby and regional exploration targets, which include the Tornado and Blizzard areas, and numerous untested geochemical, Electromagnetic (EM) and Induced Polarization (IP) anomalies.
The Gap Prospect is a 500m-long zone located between the Corona and Cirrus Copper Deposits (Figure 2), where multiple drill holes have intersected high-grade copper sulfides (including 1.5m @ 4.4% Cu, 9.8g/t Ag from 39m, and 2m @ 2.5% Cu from 74m downhole in AB18-09, and 20m @ 2.3% Cu, 3.3g/t Ag (Including 8m @ 5.3% Cu, 6.4g/t Ag) from 28m in SR24-003.
The Squall and Hailstorm Prospects are located immediately south of the southern graben fault and collectively extend 1.8km northwest along strike of the Corona Deposit (see Figure 2).
Drilling at Squall during the 2024 season intercepted 1.5m @ 2.36% Cu, 5.0g/t Ag from 181.4m (SR24-108) at the end of the hole, whilst surface geochemistry at Hailstorm has identified a 250m x 250m copper anomaly that remains open to the south (Figure 5).
Figure 5: Copper gossan from the Hailstorm Prospect. This is massive chalcocite (copper sulfide) and returned a laboratory assay grade of >50% Cu, 61g/t Ag (Sample Y007193, 50% Cu is the upper limit of the assay technique used).
Mobile Magneto-Telluric (MobileMT) Survey
A regional-scale MobileMT survey is planned to cover the Storm and wider exploration areas during the 2025 program (Figure 6). MMT utilizes natural source energy to capture a broader range of EM frequencies than the techniques used at Storm to date. The survey is designed to show a greater contrast between the host rocks and potential accumulations of conductive material (i.e. metalliferous sulfide) with improved spatial and depth resolution. This is potentially very useful in delineating deeper (>200m) occurrences of copper sulfide at Storm, where the resistive host rocks cause a decreased signal-to-noise ratio and decreased confidence in interpretation with depth in the historical geophysics.
The initial MobileMT survey will be completed over the Midway-Storm-Tornado area as an orientation survey to determine the response of the known deposits before extending the survey into more regional areas. The survey will begin in the coming week, allowing results to inform drill targeting and prioritization this season.
Figure 6: Proposed MobileMT survey showing the planned Phase 1 and Phase 2 survey lines, overlaying topography, and regional geology.
FORWARD PROGRAM
Qualified Person
Michael Dufresne, M.Sc., P.Geol., P.Geo., is a Qualified Person as defined by the NI 43-101 Standards of Disclosure for Mineral Projects and has reviewed and approved the scientific and technical information in this press release.
QA/QC Protocols
The analytical work reported herein was performed by ALS Global ('ALS'), Vancouver Canada. ALS is an ISO-IEC 17025:2017 and ISO 9001:2015 accredited geoanalytical laboratory and is independent of Aston Bay Holdings Ltd., American West Metals Limited, and the QP. Drill core samples were subject to crushing at a minimum of 70% passing 2 mm, followed by pulverizing of a 250-gram split to 85% passing 75 microns. Samples were subject to 33 element geochemistry by four-acid digestion and inductively coupled plasma atomic emission spectroscopy (ICP-AES) to determine concentrations of copper, silver, lead, zinc, and other elements (ALS Method ME-ICP61a). Overlimit values for copper (>10%) and were analyzed via four-acid digestion and ICP-AES (ALS Method Cu-OG62).
Aston Bay Holdings Ltd. and American West Metals Limited followed industry standard procedures for the work carried out on the Storm Project, incorporating a quality assurance/quality control (QA/QC) program. Blank, duplicate, and standard samples were inserted into the sample sequence and sent to the laboratory for analysis. No significant QA/QC issues were detected during review of the data. Aston Bay Holdings Ltd. and American West Metals Limited are not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.
About Aston Bay Holdings
Aston Bay is a publicly traded mineral exploration company exploring for high-grade critical and precious metal deposits in North America.
The Company is currently exploring the Storm Copper Property and Cu-Ag-Zn-Co Epworth Property in Nunavut. The Company is also in advanced stages of negotiation on other lands with high-grade precious and critical metals potential in North America
The Company and its joint venture partners, American West Metals Limited and its wholly-owned subsidiary, Tornado Metals Ltd. (collectively, 'American West'), have formed a 20/80 unincorporated joint venture in respect of the Storm Project property, which hosts the Storm Copper Project and the Seal Zinc Deposit. Under the unincorporated joint venture, Aston Bay shall have a free carried interest until American West has made a decision to mine upon completion of a bankable feasibility study, meaning American West will be solely responsible for funding the joint venture until such decision is made. After such decision is made, Aston Bay will be diluted in the event it does not elect to contribute its proportionate share and its interest in the Storm Project property will be converted into a 2% net smelter returns royalty if its interest is diluted to below 10%.
FORWARD-LOOKING STATEMENTS
Statements made in this news release, including those regarding entering into the joint venture and each party's interest in the Project pursuant to the agreement in respect of the joint venture, management objectives, forecasts, estimates, expectations, or predictions of the future may constitute 'forward-looking statement', which can be identified by the use of conditional or future tenses or by the use of such verbs as 'believe', 'expect', 'may', 'will', 'should', 'estimate', 'anticipate', 'project', 'plan', and words of similar import, including variations thereof and negative forms. This press release contains forward-looking statements that reflect, as of the date of this press release, Aston Bay's expectations, estimates and projections about its operations, the mining industry and the economic environment in which it operates. Statements in this press release that are not supported by historical fact are forward-looking statements, meaning they involve risk, uncertainty and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements. Although Aston Bay believes that the assumptions inherent in the forward-looking statements are reasonable, undue reliance should not be placed on these statements, which apply only at the time of writing of this press release. Aston Bay disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except to the extent required by securities legislation.
Neither TSX Venture Exchange nor its regulation services provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.
For more information contact:
Thomas Ullrich, Chief Executive Officer
[email protected]
[phone]
Sofia Harquail, IR and Corporate Development
[email protected]
[phone]
SOURCE: Aston Bay Holdings Ltd.
press release