Easter Jeep Safari 2025: Introducing 7 stunning Jeep concept vehicles you can't miss
The occasion is the Easter Jeep Safari, now in its 59th year. It's a celebration of off-roading in Moab, Utah, said to attract more than 20,000 enthusiasts. This year, the dates are April 12-20.
Seven wild Jeep concept vehicles have been created by the Stellantis brand this year. Here's how Jeep describes them:
Reviving Jeep: New leadership and fresh lineup set the brand back on track
Jeep Convoy Concept — Military-inspired, classic workhorse Jeep Gladiator.
Jeep Bug Out 4xe Concept — Extended carbon-fiber Jeep Wrangler that "unites ultralight camping with overlanding."
Jeep Rewind Concept — "Nostalgic take on a Jeep Wrangler that gives all the feels of an era when loud neon colors were all the rage."
Jeep Wrangler 4xe Blueprint Concept — "Rolling catalog of nearly 40 factory-tested and factory-backed items."
Jeep Wrangler 4xe Sunchaser Concept — Features a "striking" solar flash and satin black two-tone exterior.
Jeep Gladiator High Top Honcho Concept — Heritage-inspired truck popularized in the mid-1970s.
Jeep J6 Honcho Concept — Mixes the late-1970s Jeep Honcho theme with concept and production Jeep Performance Parts and accessories from Mopar.
The vehicles are scheduled to be on display April 17 and 18 at Walker Drug in Utah, where a Jeep consumer display is planned as well during the week of April 14-18.
Contact Eric D. Lawrence: elawrence@freepress.com. Become a subscriber. Submit a letter to the editor at freep.com/letters.
This article originally appeared on Detroit Free Press: Jeep unveils 7 concepts for the annual Easter Jeep Safari
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
4 hours ago
- Yahoo
What Made Mopar's 383 Engine Different From The 340 And 440?
Straight off the bat, it's the engine sizes. The Mopar 383 V8 displaces 383 cubic inches (6.3 liters), sitting between the 340 (5.6 liters) and 440 (7.2 liters). The 340, 383, and 440 all are part of the Mopar V8 engine family and are among its greatest hits. But there are a lot of factors that help the Mopar 383 stand apart from the 340 and 440, especially in areas of engine architecture, performance, versatility, and reliability. Also known as the Chrysler 383 Big Block, it followed the first-gen Chrysler Hemi engines called the Firepower V8 engines. However, the 383 did not use a hemispherical combustion chamber. It used a wedge-type combustion chamber where the top (where the air-fuel mixture collects) is, well, wedged-shaped. While the wedge big block engines were introduced in 1958 with the B-Series 350 and 361, the 383 came out a year later. It essentially was a bored-out version of the 361, delivering 305 horsepower and 410 pound-feet of torque. Like other high-performance Chrysler V8s, the 383 was developed by Mopar, Chrysler's performance subsidiary. Mopar is a fascinating history lesson in itself. Made from 1959 to 1971, the Mopar 383 was offered in the Chrysler 300, Newport, Town and Country, Saratoga, Windsor, and the DeSoto Adventurer. It came in the Dodge Super Bee, Charger, Dart, Challenger, Monaco, Coronet, and Polara, as well as D-series trucks and Custom 880s. And you could get it in the Plymouth Barracuda, Road Runner, Satellite, Belvedere, and Fury. Read more: These Are The Most Forgettable Cars The Big And Small Of It Unlike the 383 and 440, the Mopar 340 is a small-block V8 first sold in 1968 as part of Chrysler's light A-series engine lineup. It addressed the need for a smaller, compact V8 engine for lighter vehicles. Claimed power was 275 horsepower and 340 lb-ft, though real-world tests put numbers at 320 hp and 368 lb-ft. By the time it was discontinued in 1973, the Mopar 340 was available in the Dodge Dart, Duster, Challenger, Charger, Super Bee, Swinger, and Demon as well as the Plymouth Barracuda, Road Runner, and Cuda. The largest of the three, the Mopar 440 debuted in 1965, succeeding the Mopar 413. Unlike the 340 and 383, the Mopar 440 comes from Chrysler's Raised Block line of engines. It delivered 375 horsepower and 480 lb-ft. The Mopar 440 Big Block V8 was reserved for the high-performance versions of muscle cars like the Dodge Coronet R/T, Super Bee, Charger R/T, and Challenger R/T as well as the Plymouth Cuda, GTX, Superbird, and Road Runner. In case it seems confusing, a lot of muscle cars came with different engine options, so some of those on the list share the Mopar 340, 383, and 440 power trains. We'd prefer them, too, even if the 2024 Dodge Charger Daytona EV is convincing muscle-car cosplay. Key Differences Between The Mopar 383, 340, 440 Besides their engine sizes, these Mopar engines differed in power output. As mentioned, the 383 delivered 305 hp and 410 lb-ft; the 340 officially had 275 hp and 340 lb-ft; and the Mopar 440 pushed out 375 hp and 480 lb-ft. Chrysler even offered high-powered versions of these engines, offering them with exotic names. For example, the 383's high-performance versions were called the 383 Magnum, Commando, and Golden Commando. For the 340, it was the 340 Six-Pack and T/A (Trans Am). The Mopar 440 was also available in exotic trim like the 440 Magnum and 440 Six-Pack. But those are a thing of the past, and Dodge's gasoline-powered muscle cars are truly dead. A major difference between the 383 and 340 was their intent. While the 383 Big Block V8 was meant for raw performance, the 340 Small Block V8 was designed to be lightweight and efficient. When it comes to the 440 Big Block V8, a key difference with the 338 is its architecture, specifically their deck heights — the distance from the crankshaft centerline and top surface of the cylinder block (minus the cylinder head). The 383 has a low deck height of 9.98 inches, while the 440 has a raised deck height of 10.725 inches. Chrysler did make a 383 RB-Series with a raised deck matching the 440, but that was available just for two years, in 1959 and '60. Want more like this? Join the Jalopnik newsletter to get the latest auto news sent straight to your inbox... Read the original article on Jalopnik.
Yahoo
4 hours ago
- Yahoo
Chrysler FirePower: The History Of The First HEMI Engine
Stellantis, the parent company of Chrysler and RAM, caused quite a ruckus in 2024 when it announced it would discontinue the legendary HEMI engine in its RAM trucks. However, the blowback from this change prompted the company to quickly reverse course, and in 2025 it was announced that the HEMI would be reintroduced in the 2026 RAM. In the press release distributed by Stellantis, the CEO of the RAM brand Tim Kuniskis even called discontinuing the HEMI a "mistake". Perhaps it was -- after all, this iconic power plant has been beloved ever since the 1951 production debut of the FirePower, Chrysler's very first HEMI engine. However, the true history of the HEMI goes much farther back than that. In fact, it starts about half a century before the Chrysler FirePower ever saw the light of day. A HEMI engine would win a Grand Prix and another one would join the Allies in World War II well before Chrysler would start using it in its production automobiles. While the name HEMI is closely associated with Chrysler and other members of its family of brands -- most notably Dodge and RAM -- the automaker did not invent the engine, even though it would eventually trademark the name. Here's the full history of the HEMI legacy. Read more: Call Me A Luddite, But These Modern Features Only Seem To Make Cars Worse The Humble Beginnings Of The HEMI The very first HEMI engine was likely used to power a boat, and the first HEMI engine used in a car was only a 4-cylinder. Though there is not a clear consensus, many historians credit Chelsea, Wisconsin resident Allie Ray Welch with inventing the concept. He built a two-cylinder prototype in 1901 and used it as the motor for a boat. The first time an automaker put one in a car was in 1905, by a Belgian company named Pipe. A little later, the Premier Automobile Co, of Indianapolis would place a HEMI engine in a race car. The Premier could crank out 100 hp at 1,000 rpm. Due to the weight of its engine, the car would be disqualified from all but one race, despite the best efforts of its owner Carl Fisher. That race was at the Indiana State Fair, where it won by reaching the alarming speed of 59 mph. Other manufacturers, like Fiat, Peugeot, Alfa Romeo, Daimler, and Riley would also start producing cars with HEMI engines in the first part of the 20th century. Felice Nazzaro drove a HEMI-equipped Fiat to victory in the 1907 Grand Prix, winning that race by over six minutes. The HEMI design, or variations of it, have been used in race cars since then. The appeal of the engine came for its raw power and unique design. The cylinder head combustion chambers on the early HEMI engines were shaped like one-half of a sphere, or hemisphere -- hence the name, HEMI. This makes it possible to place the spark plug top and center, which makes the burn of the air/fuel mixture more efficient. Air flow, meanwhile, is improved by the placement of an intake and exhaust valve on either side of the plug. Chrysler Goes To War Some form of the HEMI engine would pop up here and there after the early years of the 20th century, but Chrysler had yet to adopt it. That would change during World War II. American automotive manufacturers shifted their focus dramatically from producing civilian automobiles to the war effort. Entire automotive plants would be converted to factories for making tanks, military vehicles, and even airplane engines. Chrysler was no exception in this regard, as it would build 22,000 tanks over the course of the war. Also notable among Chrysler's efforts during the war was the development of the experimental 2,500-hp 36.4-l inverted V16 aircraft engine, which was, in fact, a HEMI. It was tested in a Republic P-47 Thunderbolt to great success, reaching over 500 mph. However, the war ended before it could be rolled out to production and jet engines pretty much made it obsolete. Chrysler would stay in the military equipment business after the war ended, however, by producing the V-12 AV-1790-5B engine for the cold-war era M47 Patton tank. The Chrysler FirePower Finally Hits The Streets Chrysler put to use the knowledge it had gained during World War II and introduced its first V8 HEMI automotive engine in 1951. Interestingly, some say that neither this engine -- nor any of the modern Chrysler HEMIs -- are true HEMIs. This is because instead of using truly hemispherical cylinder head combustion chambers like the original HEMIs, Chrysler decided to go with a smaller dome shape. That engine wasn't even called HEMI at first -- instead, it was given the name FirePower and internally referred to as the Double Rocker due to its dual-valve configuration. The automaker put the FirePower engine in three of its cars, the Chrysler New Yorker, the Chrysler Imperial, and the Chrysler Saratoga. It measured 331 cubic inches and was rated at 180 hp. That would be modest by today's standards, but the Chrysler HEMI outclassed its nearest competition, the 1951 Cadillac, by 20 hp. Chrysler was so confident in the FirePower that it asked the other brands in the family to develop their own lines of HEMI engines. Soon, DeSoto would produce the Firedome starting in 1952 and Dodge would release the Red Ram starting in 1953. While similar, these engines were all developed separately, as was the practice among sister brands at the time, which meant that their parts were not interchangeable. The Chrysler FirePower Fights To Remain On Top Chrysler had thrown down the gauntlet, but other automakers quickly picked it up. Cadillac slapped a 4-barrel carburetor to the engine it installed in its 1952 Series 62, boosting output to 190 hp. Meanwhile, Ford would show up the Chrysler FirePower with big wins for the Lincoln at the Carrera Panamericana endurance race in 1952, 1953, and 1954. Lincoln's wins on the racetrack were getting headlines, leaving Chrysler's reputation at stake. It would respond in 1955 by releasing the Chrysler 300, which was fitted with a FirePower HEMI engine that was rated at an astounding 300 hp. By 1958, competition had pushed Chrysler to produce the 300D configuration for the 392-cubic-inch FirePower V8 engine, which could crank out 380 hp -- the highest in the industry at the time. Consumers could also opt for a high-performance version of the engine paired with a manual transmission that was rated at 390 hp, although some experts estimate that it could actually reach 435 to 450 hp. Unfortunately, this would be the last production model equipped with a FirePower. Sales had dropped, and the company decided to pivot from HEMI engines to lighter, more efficient wedge-head V8 engines, which were more cost-effective to manufacture. The Chrysler FirePower Goes To The Races The FirePower's racing history began in 1951, when Tom McCahill drove a Chrysler New Yorker at Daytona Beach and won the trophy for the fastest American stock car. After the 1954 Indianapolis 500, Chrysler revealed its 331 cubic inch HEMI engine, which could perform as well as the top vehicles in the race that year. However, Indy officials froze HEMI engines out later that year by decreasing the size limit of engines to 272 cubic inches. Chrysler returned in 1955 with a fleet of Chrysler 300 super coupes. That year would see that team's star driver, Tim Flock, win 18 races, including the championship. Buck Baker would win 14 races for the team in the following year. What's more, the team would win 16 races in a row in 1956. Chrysler would retire its production and racing Firepower engines in 1958, but racing would prompt Chrysler to resurrect the HEMI engine in 1964, when it created its Gen II HEMI engine to compete in NASCAR. It would dominate the Daytona 500 that year, prompting NASCAR to impose a rule that would restrict Chrysler from using that version of the HEMI engine until it had sold street-legal production models. Chrysler would respond by producing 1966 B-body Dodges and Plymouths with street-legal HEMI engines. The Chrysler FirePower has both a storied history and powerful legacy. Its successors, the Gen II and the current Gen III HEMI engines, would become integral parts of the company's model lineup. Sadly, the ICE-powered, HEMI-equipped Dodge Charger and Challenger were discontinued in 2023 in favor of EV versions -- but at least the HEMI engine will live on in upcoming RAM trucks. Want more like this? Join the Jalopnik newsletter to get the latest auto news sent straight to your inbox... Read the original article on Jalopnik.
USA Today
17 hours ago
- USA Today
2026 Dodge Durango SRT Hellcats to offer 6 million customization combos
Dodge unveiled the next generation of its ever-popular muscle SUV — and it's jailbroken. At a media preview hosted recently at Detroit's Conner Center — a former automotive plant fashioned into a storage and display center — Dodge unveiled the new Dodge Durango Hellcat and announced the 2026 model year would offer a Jailbreak trim level, meaning customers can mix and match paint jobs, interior features and more. For the Durango, customers can choose from a variety of six custom wheels, four colors for brake calipers, six exterior colors, six badge colors, five stripe designs, five interior seat colors and four seat belt colors. Along with the customization package, Dodge is launching a new color for the 2026 model year: a sage green paint called "Green Machine." All told, the customization opens the door for more than 6 million unique color combinations on Dodge Durango Hellcats. Dodge officials did not release pricing information. "We challenge you to make a one-of-one from the more than 6 million combinations available," Dodge CEO Matt McAlear said at the preview. For customers who want to guarantee they will have a unique Durango, Dodge is offering "select" buyers the opportunity to paint their car "nearly any color imaginable," outside of the six exterior colors offered through the Jailbreak program. 2026 Dodge Charger returns: Ditching its EV-only strategy, the high-output version has a top speed of 177 mph Stellantis, Dodge's parent company, in recent times limited the production of the Hellcat engine and removed it from two of its most popular body styles: the Challenger and Charger. In 2024, Dodge unveiled a completely redone version of the Charger, powered by an electric motor — not the high-powered V8s that many Dodge aficionados had grown to love. Soon, Dodge will unveil a six-cylinder internal combustion engine for the new Charger body style. Other Stellantis brands previously restricted familiar V8 engines. In 2024, citing a push toward electrification and stricter emissions standards, Ram ended production of the HEMI V8 in its pickup trucks. In June, though, Ram CEO Tim Kuniskis announced that the HEMI V8 would be returning to dealership floors for the 2026 model year, calling the decision to discontinue the engine a mistake. But the supercharged HEMI V8 Hellcat engine (though production has slowed) lives on in the Durango body style, boasting 710 horsepower and three rows of seating. At the preview, McAlear cited statistics pointing to the popularity — and profitability — of the Durango. He said U.S. sales for the car jumped 51% in the second quarter of 2025 over the first quarter. In response to a Free Press question (part of the USA TODAY Network) about the future of the Durango Hellcat, McAlear said the brand is "committed to the Durango now and in the future. It is a staple." McAlear said the Durango is one of the last V8s standing in a crowded SUV market. Its high performance satisfies adrenaline junkies, while the conveniences afforded by three rows of seating, towing and storage capabilities can appeal to family-oriented buyers. Dodge opened orders for the 2026 Durango Hellcat on Aug. 13, and vehicles are scheduled to start arriving at dealerships in late 2025. The Jailbroken Hellcat will be produced at Stellantis' Jefferson North Assembly Plant in Detroit. Liam Rappleye covers Stellantis and the UAW for the Detroit Free Press. Contact him: LRappleye@
