Nissan and Infiniti Recall Over 400,000 Variable-Compression-Engine Vehicles in the U.S.
Nissan is recalling 443,899 vehicles, including Rogue, Altima, QX50, and QX55 models, due to potential engine failure. Dealers will inspect and repair affected engines for free. The recall affects certain models from 2019-2024, with notifications starting August 25.
This summary was generated by AI using content from this MotorTrend article Read Next
According to Nissan, the engine bearings may have manufacturing defects that could lead to engine failure, significantly increasing the risk of a crash if that failure were to happen underway. As part of the recall, dealers will inspect the oil pan for signs of metal debris.
If debris is found, the engine will be repaired or replaced as needed. For vehicles equipped with the 1.5-liter three-cylinder engine, if no debris is found, dealers will replace the oil pan gasket and engine oil, and reprogram the engine control module. In the case of vehicles with the 2.0-liter four-cylinder VC-Turbo engine, only an oil change will be required if no debris is found. All necessary repairs, including full engine replacements, will be performed free of charge.
In late 2023, the NHTSA launched a preliminary evaluation following multiple owner complaints about the VC-Turbo engine in some Nissan and Infiniti models. Drivers reported a complete loss of power due to engine failure. While the issue is serious, no crashes or injuries related to the defect have been reported so far.
Nissan says bearing failures typically develop gradually, giving drivers early warning signs. These may include unusual engine noises, rough idling or performance, and dashboard warning messages.
This recall comes at a challenging time for Nissan. The automaker has faced ongoing financial struggles on a global scale, including a recently abandoned merger effort with Honda. The addition of a major recall affecting its best-selling model, the Rogue, could further impact consumer confidence and deter potential buyers. Worse, the VC-Turbo is one of Nissan's more innovative technologies of late (it also appears in Infiniti models, as this recall makes clear), helping the brand live up to its "Innovation that Excites" tagline. It can vary its compression ratio (hence the "VC" in the name) on the fly, allowing finer control over combustion to prioritize fuel economy or power as needed.
It's worth noting that Nissan has addressed the bearing issue for 2025 Rogue models, which are not affected by the recall.
Nissan will begin notifying affected owners by mail starting on August 25. Once notified, customers are encouraged to schedule a service appointment at their local Nissan dealership. To check whether your vehicle is included in this or any other recall, visit the NHTSA's recall lookup tool and enter your vehicle's VIN or license plate number here.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
26 minutes ago
- Yahoo
Why GM Spring Hill is changing up how it produces EV batteries
General Motors' Spring Hill plant will begin producing cheaper battery cells as part of the company's ongoing multibillion dollar joint-venture with South Korean-based LG Energy Solution. The announcement is the latest stepping stone of a 2021 $2.3 billion partnership dubbed Ultium Cells. The low-cost battery cells are known as lithium iron phosphate (LFP). Named after the elemental compounds involved, LFPs are cheaper than other battery cell counterparts used in electric vehicles. 'At GM, we're innovating battery technology to deliver the best mix of range, performance and affordability to our EV customers,' Kurt Kelty, VP of batteries, propulsion, and sustainability at GM, said in a press release. 'This upgrade at Spring Hill will enable us to scale production of lower cost LFP cell technologies in the U.S., complementing our high-nickel and future lithium manganese rich solutions and further diversifying our growing EV portfolio.' Touted for its longer range between charges and reliability in low temperatures, high-nickel battery cells continue to dominate the U.S. market. Despite high-nickel's advantages, EV manufacturers are beginning to favor LFPs for its lower costs and non-combustibility. With the majority of LFP production based in China, a host of EV manufacturers are planning to onshore LFP manufacturing to create supply chain security. While LG Energy Solution has major LFP production sites in Holland, Michigan, and now Spring Hill, other soon-to-be LFP manufacturers include Tesla and Ford who plan to build production sites in Nevada and Michigan, respectively. The Spring Hill plant employs 1,300 people and expects to begin producing the battery cells by late 2027. 'We are grateful for the continued partnership and support we've received from the state of Tennessee as we continue to advance our lead in EV battery cell manufacturing,' President and CEO of Ultium Cells Kee Eun said in a statement. 'This investment expands our capabilities beyond a single battery cell chemistry, allowing us to produce new chemistries alongside our existing cells. 'Expanding our product portfolio ensures Ultium Cells will remain at the forefront of battery cell innovation and sustain our commitment to be a stable, long-term employer for the communities we serve.' The Ultium Cells plant in Warren, Ohio, will continue to produce battery cells with nickel cobalt manganese aluminum chemistry. This article originally appeared on Nashville Tennessean: General Motors plans to produce cheaper EV batteries in 2027 Error while retrieving data Sign in to access your portfolio Error while retrieving data Error while retrieving data Error while retrieving data Error while retrieving data
Yahoo
26 minutes ago
- Yahoo
These 2 Auto Part Stocks Got a Tune-Up — UBS Says ‘Buy'
The global automotive fleet is aging. Increased prices, tariff and trade uncertainty, the possibility of recession – all of these are negative factors pushing customers to delay vehicle purchases. On a less gloomy note, better vehicle design and improved quality control in manufacturing processes mean that cars are just better, and are lasting longer – again, leading customers to delay new vehicle purchases. Elevate Your Investing Strategy: Take advantage of TipRanks Premium at 50% off! Unlock powerful investing tools, advanced data, and expert analyst insights to help you invest with confidence. Make smarter investment decisions with TipRanks' Smart Investor Picks, delivered to your inbox every week. Manufacturers are adapting to these conditions, but automakers are not the only game in town. When drivers keep their vehicles longer, they create a more robust market for aftermarket parts, with auto parts companies as the immediate beneficiaries. Switch Auto Insurance and Save Today! Great Rates and Award-Winning Service The Insurance Savings You Expect Affordable Auto Insurance, Customized for You Joseph Spak, automotive analyst from UBS, has taken the measure of the industry and explains why auto parts stocks are the way to go right now. 'On one hand, H1 is likely to remain relatively healthy and suppliers could potentially benefit from more positive sentiment towards Europe (c45-50% of peer group sales). On the other hand, visibility remains low with H2 still a question mark as the potential for US tariffs on EU-made cars and structural industry challenges are not going away. Possibly, ZF's (ZF Friedrichshafen AG) comments about weaker LVP (light vehicle production) need to be seen against the internal pressures regarding the ongoing restructuring programme. We maintain a preference for supplier names generating higher EBIT margins, conservative 2025 guidance, diversified manufacturing footprints and resilient balance sheets…' Spak noted. Spak follows these comments with two concrete recommendations, picking out a pair of auto parts stocks that he recently upgraded to Buy. Let's take a closer look at them, using data drawn from TipRanks as well as the commentaries from UBS. Visteon (VC) The first auto part stock we'll look at, Visteon, was founded 25 years ago in Michigan, and keeps its headquarters in Van Buren Township, between Detroit and Ann Arbor – and near the heart of southeast Michigan's automotive industry. Visteon supplies technology and equipment for automakers, and its location near the region's major airport gives it easy access to the global market. Visteon has its hands in a wide range of automotive tech and parts. The company has taken a leading position in guiding the industry as it moves from analog instrument clusters to digital dashboards, providing 2D and 3D graphics, a wider range of integrated road and vehicle information, and even navigation displays. In short, the company is turning the traditional dashboard into a more immersive experience, putting the driver at the center of a digital cockpit designed to provide a 'heads-up' driving experience. The company is also deeply involved in the development of improved electric drivetrains. While electric vehicles (EVs) currently make up only a small part of the global automotive fleet, their role is expanding, and newer, better technology will aid that expansion. Visteon is working on both battery and charging tech, approaching the EV field from the perspectives of energy provision and energy storage. The company has technology on the market to monitor battery temperature, voltage, and current during use, all vital for vehicle safety, and its battery connection technologies can support a variety of battery chemistries. On the charging side, Visteon is working with bidirectional power conversion, technology designed to allow a seamless integration of the vehicle charging station with the power grid. Visteon's work has created a portfolio of state-of-the-art products, all developed to enhance the ongoing digitalization and electrification of the automotive industry. The company works with OEMs on the global scene, and can provide parts and expertise for vehicles of all types, from consumer passenger vehicles to commercial transports and trucks to motorcycles. The company works with automakers in 17 countries, including such giants as Toyota, Volkswagen, and Stellantis. Visteon started off 2025 with a strong first quarter. In its 1Q25 earnings release, the company reported a top line of $934 million, roughly flat year-over-year but beating the forecast by $23 million. The company's bottom line was given as a GAAP EPS of $2.36, which was 45 cents per share better than expected. Visteon launched 16 new products in the quarter, and won $1.9 billion in new business. On the balance sheet, the company had net cash of $343 million at the end of Q1. The quarterly adjusted free cash flow came to $38 million. Digging into the bull case, UBS analyst Joseph Spak is standing by his optimistic outlook on VC, including among his reasons: '1) seeing a true durable outgrowth story driven by increased penetration through diversifying and growing with new customers such as Toyota; 2) reasonable out-year expectations; 3) a valuation trading near the lows and a discount to the peer group which we believe is unwarranted.' Adding some vital detail, Spak goes on to say, 'We estimate VC's sales with Toyota could grow at a +54% CAGR from 2024-2028, leading to 2028 VC sales of nearly $4.4bn. We note the Street is at ~$4.2bn for 2028 which is essentially VC's existing 2027 guidance, so expectations seem low. Our resulting 2026/27 EBITDA forecasts are 7/6% above consensus, respectively. Better than expected 2028 revenue guidance, potentially issued with 4Q25 earnings, could be a catalyst. Near-term, we believe numbers are solid, and VC could benefit from better production at key customer Ford, China headwinds could stabilize in 2H25, improving outgrowth, and while VC paused their buyback, FCF should remain solid. We believe this program could be restarted later this year.' These comments support Spak's Buy rating (upgraded from Neutral) on Visteon's shares, and his $142 price target (raised from $85) suggests that the stock will gain 24% in the coming year. (To watch Spak's track record, click here) For the Street as a whole, VC shares have a Strong Buy consensus rating, based on 12 recent reviews that include 9 Buys and 3 Holds. However, the stock is trading for $109.77, and the $110.67 average price target suggests the shares will stay rangebound for the time being. It will be interesting to see whether analysts update their targets or downgrade their ratings shortly. (See VC stock forecast) American Axle & Manufacturing (AXL) Now, let's stay in Detroit and look at another parts supplier for the Motor City's auto sector. American Axle has been in business since 1994, delivering power for car makers. More specifically, American Axle, also called AAM, is a designer and manufacturer of driveline and metal forming technologies, which are used in the drivetrains of internal combustion, electric, and hybrid vehicles. AAM, in its lifetime, has become a top-tier automotive supplier, well known for its parts and supplies related to powertrains. The company's operating system is well known for delivering both operational excellence and quality products. AAM has an active R&D segment, and over the past 30 years has invested more than $1 billion in new research initiatives, including creating 11 engineering development centers around the world. What this all comes down to is a solid portfolio of parts and appliances, designed for today's automobiles. AAM's Driveline portfolio includes such items as front axles, rear beam axles, differentials, power transfer units, constant velocity joints, damped gears, and engine isolation pulleys – a wide range of products essential in transferring power from the engine to the wheels. This is supported and enhanced by the company's metal forming unit, which includes the processes of designing, engineering, and manufacturing forged metal parts. While automakers are turning to lightweight materials for car bodies and interiors to save weight, there are plenty of parts that still must be made of metal – and AAM has the expertise and industry experience to properly design and forge these precision parts. As with Driveline, the list is long – axle shafts, clutches, relay rods, scissor gears, and tie rod sockets make up just a small portion of it. The company also has a long list of processes, including hot and cold forging, autogaging, and induction heat treating (to name a few) that it uses in the manufacturing processes. In an important development, American Axle in January of this year made an offer to acquire, and reached an agreement with, the British auto parts firm Dowlais. The transaction, planned to be in both stock and cash, is valued at approximately $1.44 billion. While it has hung over the company's head for the past several months, both firms' shareholders are expected to vote on the combination by the end of this month. In the first quarter of this year, American Axle reported total sales of $1.41 billion. This was down 12% year-over-year, and missed the forecast by $14.5 million. The company's non-GAAP earnings came to 9 cents per share, beating expectations by 3 cents. We should note here that shares in this company are down 17% for the year-to-date, underperforming the broader market's ~6.5% year-to-date gain by a wide margin. But on that note, UBS' Spak is doubling down on his bullish view of AXL, including among his reasons: '1) A longer tail for core AXL programs such as GM's full-size truck/SUV platform (T1XX) amid a relaxed US emissions regulatory environment. 2) GM adding US capacity is a net positive for AXL that could boost outer year earnings power and is not yet in consensus numbers. 3) At current levels, the proposed transaction with Dowlais (a UK listed automotive supplier) could potentially create long-term value, in our view.' Spak wraps up by pointing out another potential support for the stock, writing, 'Further, we note that AXL has meaningfully lagged vs. the supplier peers over the past quarter, which we believe is in part due to overhang from the proposed Dowlais transaction. Closure could be a catalyst; AXL votes on July 15 and DWL votes on July 22.' The UBS analyst rates AXL as a Buy (upgraded from Neutral), and he gives the stock a $7 price target (raised from $4.5) to suggest an upside potential of 44% in the next 12 months. That's the bullish view, but this auto part supplier has a Hold rating from the analyst consensus, based on 5 reviews that include 2 Buy and Holds, each, and 1 Sell. The stock is selling for $4.85 and its $5.78 average price target points toward a one-year upside gain of 19%. (See AXL stock forecast) To find good ideas for stocks trading at attractive valuations, visit TipRanks' Best Stocks to Buy, a tool that unites all of TipRanks' equity insights. Disclaimer: The opinions expressed in this article are solely those of the featured analysts. The content is intended to be used for informational purposes only. It is very important to do your own analysis before making any investment. Disclaimer & DisclosureReport an Issue
Yahoo
33 minutes ago
- Yahoo
SK On signs domestic lithium deal with EcoPro
SK On Company has signed a lithium hydroxide sourcing deal with local battery materials producer EcoPro Innovation Company, as the South Korean electric vehicle (EV) battery manufacturer continues to reduce its dependence on Chinese suppliers and meet the requirements of the US Inflation Reduction Act (IRA). The deal provides for EcoPro to supply an initial 6,000 metric tons of domestically produced lithium hydroxide to SK On by the end of 2025, enough for around 100,000 electric vehicles. The lithium hydroxide, a key ingredient in battery cathodes and anodes, will be processed in South Korea, before being shipped to SK On's battery manufacturing plants in the US. Lithium hydroxide produced in South Korea qualifies for the IRA's Advanced Manufacturing Production Credit, unlike lithium hydroxide sourced from China, helping US-based battery manufacturers such as SK On access tax credits and maximize their competitiveness in the US market. Park Jong-jin, SK On's head of strategic purchasing, said in a statement: 'We are building a stable supply chain amid shifting global policies. Securing competitive materials and diversifying partners will boost our North American capabilities.' EcoPro Innovation's CEO, Kim Yoon-tae, confirmed that this is its first lithium hydroxide supply contract with a global battery manufacturer, representing a key milestone is its strategy to establish a strong presence in North American and European battery supply chains. "SK On signs domestic lithium deal with EcoPro" was originally created and published by Just Auto, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site. Error while retrieving data Sign in to access your portfolio Error while retrieving data Error while retrieving data Error while retrieving data Error while retrieving data
