How to see China's Tiangong space station and the ISS in the predawn sky this week
During this upcoming week, skywatchers across most of the U.S. and southern Canada will get an opportunity to view the two largest space vehicles now in orbit around the Earth within minutes of each other.
They are the International Space Station (ISS) and China's space station, Tiangong. If you are up during the predawn hours, you'll probably be able to make a sighting of both within less than a half hour of each other.
And on the morning of July 5, it may be possible to see both in the sky at the same time.
If you go out and carefully study the sky near dusk or dawn, the odds are that you should not have to wait more than a few minutes before you see one of the more than 30,700 satellites now in orbit around Earth.
Most of these are just "space junk" ranging in size from as large as 30 feet (9 meters) down to about the size of a softball, including defunct satellites, rocket bodies, and fragments from collisions. In addition to the tracked objects, there are an estimated 130 million pieces of debris too small to be tracked. U.S. Space Command, headquartered at Peterson Space Force Base in Colorado Springs, keeps a constant watch on all orbiting space debris.
TOP TELESCOPE PICK:
Want to see the night sky up close? The Celestron NexStar 4SE is ideal for beginners wanting quality, reliable and quick views of celestial objects. For a more in-depth look at our Celestron NexStar 4SE review.
Most satellites are too faint to be seen with the unaided eye. But depending on who's counting, about 500 can be seen with the unaided eye. These are the satellites that are large enough (over 20 feet, or 6 m) in length) and low enough (100 to 400 miles, or 160 to 640 kilometers) above Earth to be most readily seen. In his book Observing Earth Satellites, the distinguished British scientist Desmond King-Hele perhaps said it best: "A satellite looks like a star that has taken leave of its senses and decided to move off to another part of the sky."
The International Space Station is by far the biggest and brightest of all the man-made objects orbiting Earth. More than four times as large as the defunct Russian Mir space station, the ISS has a total mass of approximately 925,000 pounds (420,000 kilograms), and measures 357 feet (109 m) across and 240 feet (73 m) long. This makes it almost the equivalent to the length of a football field, including the end zones, according to NASA.
The ISS draws power from four pairs of solar arrays, which are each 112 feet (34 m) long and 39 feet (12 m wide) — longer than a Boeing 777's wingspan. Additionally, the ISS is being upgraded with six new, smaller Roll-Out Solar Arrays (iROSAs). These are being installed over portions of the existing arrays. Each new iROSA measures 63 feet (19 m) long by 20 feet (6 m) wide. Despite being smaller, they are more efficient due to technological advancements.
Presently circling Earth at an average altitude of 259 miles (416 km) and at a speed of 17,900 mph (28,800 kph), the ISS takes 93 minutes to orbit Earth and completes roughly 15.5 orbits per day. It can appear to move as fast as a high-flying jet airliner, sometimes taking about four to five minutes to cross the sky. Because of its size and the configuration of its highly reflective solar panels, the space station is now, by far, the brightest man-made object currently in orbit around Earth.
On its most favorable passes, it can appear some 2.5 times brighter than Venus and nearly 40 times brighter than Sirius, the brightest star in the night sky. And, as a bonus, sunlight glinting directly off the solar panels can sometimes make the ISS appear to briefly "flare" in brilliance to as bright as magnitude -8, some 19 times brighter than Venus!
Besides the ISS, there is another space station orbiting Earth. That's Tiangong (Chinese for "Heavenly Palace"), a permanently crewed space station operated by China's Manned Space Agency (CMSA). The chief purpose of Tiangong, according to the CMSA, is to develop and gain experience in spacecraft rendezvous technology and to serve the platform for the next-generation orbit transportation vehicles and technology for future deep-space missions.
Tiangong is smaller than the ISS, in overall dimensions measuring about one-fifth as large. Its total mass is approximately 77 tons (69,900 kg). It measures approximately 180 feet (55 m) in length and contains three modules (the ISS has 16 modules). It orbits Earth at an average altitude of 244 miles (393 km), somewhat similar to the ISS.
And, like the ISS, it is a prominent object when moving across the nighttime sky. On its most favorable passes, it can appear as bright as Venus (magnitude -4.1), though usually it tends to appear closer to magnitude -2 (as bright as Jupiter).
Currently, taking into account both the ISS and Tiangong, there are 14 humans in space.
From now through the final days of July, North Americans and Europeans will have many opportunities to see both the ISS and Tiangong flying over their homes, due chiefly to a seasonal circumstance. Nights are now the shortest, and the time that a satellite in low Earth orbit (like the ISS and Tiangong) can remain illuminated by the sun can extend throughout the night, a situation that can never be attained during other times of the year.
Because both space stations circle Earth about every 90 minutes on average, it's possible to see them not just on one singular pass, but for several consecutive passes.
And from now through July 8, the ISS and Tiangong will be making morning passes — one to two hours before sunrise — within a half hour or less of each other. And on the morning of July 5, for parts of the northeastern U.S. and eastern Canada, it may be possible to see both in the sky at the same time.
This doesn't happen too often, due to the fact that their orbital altitudes differ slightly, along with the fact that both space stations circle the Earth at different orbital inclinations: 51.63 degrees for the ISS, compared to 41.46 degrees for Tiangong.
So, what is the viewing schedule for your particular hometown? You can easily find out by visiting one of these two popular web sites: Chris Peat's Heavens Above or NASA's Spot the Station.
With Heavens Above, you'll be able to generate accurate sighting data for both the ISS and Tiangong (as well as other bright naked-eye satellites). You'll simply need to input your location based on latitude and longitude.
NASA's Spot the Station app is a great tool for quickly finding upcoming ISS viewing opportunities. Simply pop in the location you wish to know for ISS sighting opportunities and let the widget work its magic. It will tell you the time of the ISS flyover along with how long it is visible, the maximum height it will reach in the sky and which direction it will appear and disappear from your field of view.
Predictions computed a few days ahead of time are usually accurate within a few minutes. However, they can change due to the slow decay of the space station's orbit and periodic re-boosts to higher altitudes. Check frequently for updates.
Joe Rao serves as an instructor and guest lecturer at New York's Hayden Planetarium. He writes about astronomy for Natural History magazine, Sky and Telescope and other publications.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
an hour ago
- Yahoo
MIT student builds pocket-sized 3D printer that uses light to create objects in secs
Researchers have developed photonic devices that manipulate light to enable innovative applications, like pocket-sized 3D Corsetti, a PhD candidate at MIT, and her collaborators in the Photonics and Electronics Research Group developed chip-sized devices that enable previously unimaginable applications that push the boundaries of what is possible in team, led by Professor Jelena Notaros, built the 3D printer that emits a reconfigurable beam of light into resin to create solid shapes. Small enough to sit in the palm of one's hand, the innovation is expected to enable a user to rapidly fabricate customized, low-cost objects on the go. Researchers revealed that they combined the fields of silicon photonics and photochemistry to propose the first chip-based 3D printer. They underlined that the system consists of only a single millimeter-scale photonic chip without any moving parts that emits reconfigurable visible-light holograms into a simple, stationary resin well to enable non-mechanical 3D team experimentally demonstrated a stereolithography-inspired proof-of-concept version of the chip-based 3D printer using a visible-light beam-steering integrated optical phased array and visible-light-curable resin, showing 3D printing using a chip-based system for the first time. Researchers claimed that their approach demonstrates the first steps towards a highly compact, portable, and low-cost solution for the next generation of 3D printers. Researchers believe that creating 3D objects in the palm of the hand within seconds using only a single photonic chip can transform modern manufacturing as 3D printing has revolutionized the way innovators create in nearly every aspect of modern society. Current 3D printers rely on large and complex mechanical systems to enable layer-by-layer addition of material. This limits print speed, resolution, portability, form factor, and material complexity. But the MIT team's latest innovation addresses these limitations. They also created a miniature 'tractor beam' that uses a beam of light to capture and manipulate biological particles using a chip. This could help biologists study DNA or investigate the mechanisms of disease without contaminating tissue samples. The tiny device uses a tightly focused beam of light to capture and manipulate cells. The innovation introduces a new modality for integrated optical tweezers, significantly expanding their utility and compatibility with existing applications, especially for biological experiments. Researchers expect that the chip-based 3D-printing technology introduced in this work has the potential to enable a highly-compact, portable, and low-cost solution for the next generation of 3D printers. Such a solution would offer a more accessible and rapid mechanism for generating 3D objects, impacting a wide range of application areas, including military, medical, engineering, and consumer, according to the team's approach. So far, numerous methods have been commercialized for 3D printing using extrusion, powder-bed fusion, jetting, and light-induced polymerization, among other techniques. At the consumer level, fused deposition modeling (FDM), an extrusion-based method, is the most widely used type of 3D printing.
Digital Trends
2 hours ago
- Digital Trends
ISS astronaut shares astonishing shot of a storm-generated sprite
'Just. Wow.' So said NASA astronaut Nichole Ayers as she caught sight of a phenomenon known as a sprite from the International Space Station (ISS) 250 miles above Earth. Ayers shared an image on her X account showing the fleeting phenomenon. You can see the sprite — essentially a large-scale electrical discharge — in the center of the picture as a bluish-white flash on the clouds, with a thin, red, tree-like burst of light shooting upward into the dark sky. Just. Wow. As we went over Mexico and the U.S. this morning, I caught this sprite. Sprites are TLEs or Transient Luminous Events, that happen above the clouds and are triggered by intense electrical activity in the thunderstorms below. We have a great view above the clouds, so… — Nichole 'Vapor' Ayers (@Astro_Ayers) July 3, 2025 'As we went over Mexico and the U.S. this morning, I caught this sprite,' the American astronaut, who arrived in orbit in March, wrote in a post on X. Recommended Videos As she explains, sprites are known as Transient Luminous Events (TLEs) that occur above clouds and are triggered by intense electrical activity in thunderstorms below. Seen from the ISS, the sprite likely lasted for less than a tenth of a second, suggesting that Ayers's image is a frame taken from a video that was monitoring the skies over Earth. 'We have a great view above the clouds, so scientists can use these types of pictures to better understand the formation, characteristics, and relationship of TLEs to thunderstorms,' Ayers wrote in her post. Unlike aurora, which are easily observed from the ground as well as space, it's much harder to observe a sprite from terra firma as it requires special conditions such as clear dark skies, distant large thunderstorms, and minimal light pollution. Visual reports of sprites were first recorded in 1886, but it wasn't until July 4, 1989 — exactly 36 years ago — that the first images were taken, by scientists at the University of Minnesota. For anyone wondering about their effect on aircraft, sprites actually take place way above commercial flight altitudes and therefore pose no direct danger to aircraft. While their electromagnetic pulses could theoretically affect an aircraft's electronics, no incidents have been reported.
Yahoo
2 hours ago
- Yahoo
Super relaxing vacation activity can lower your blood pressure and boost your immune system: study
The single greatest thing that you can do to not only live longer but also age well is exercise. But, let's face it — people are lazy. 'We always say that exercise is the primary nonpharmacological treatment that people should be doing to promote health, but some people can't or just won't exercise,' Jessica Atencio, a doctoral student in the lab of University of Oregon professor Christopher Minson, said in a statement. Luckily for us couch potatoes, there's a much more enjoyable activity that Atencio described as 'good supplementation' to working out. If you're staying at a hotel that has a sauna, a hot tub or the increasingly trendy infrared sauna — chances are you're way more likely to be spending your time there than at the gym, especially if you're on vacation. And, according to Atencio's study in the American Journal of Physiology, that's a very good thing. All three types of heat therapy — the use of elevated temperatures to stimulate physiological responses — are said to improve blood flow, lower blood pressure, reduce inflammation and support immune function, but the research has been limited. Moreover, no one has set out to determine which of these three offers the most health benefits. 'We compared the most commonly utilized modalities of passive heating as they're used in everyday life and studied in scientific research,' Atencio said. 'No studies have compared the acute responses between the three.' To answer this question, Atencio and her team compared the effects of soaking in a hot tub versus shvitzing in a traditional sauna or relaxing in an infrared one on 20 healthy men and women. The winner? Pop the champagne for bubbles. 'We saw that hot water immersion was the most impactful in increasing core body temperature, which is the main stimulus for these subsequent responses,' Atencio said. 'Increasing body temperature causes an increase in blood flow, and just the force of blood moving across your vessels is beneficial for your vascular health.' While it might surprise you that 'hot tub' was the answer, the scientists were unfazed. 'Hot water immersion gives you the most robust changes in core temperature because you can't effectively dissipate heat as you can if you have contact with the air and you're sweating to cool the body,' Atencio explained. 'When you're submerged in water, the sweat mechanisms aren't efficient.' As with exercise, you need to hit up the hot tub on a regular basis — and not push yourself past your limits — to really reap the long-term benefits. 'There's no doubt in my mind that if people are willing to do some heat therapy, it's going to align with improved health, as long as it's done in moderation,' Minson said. 'If you repeat these stresses over time, our lab and many others have shown that they are consistent with improved health,' he added. And if you can grab a few friends to join you — or meditate while you're having a solo soak — even better. 'It can be a very peaceful, sometimes religious, sometimes cultural and sometimes social experience,' Minson said. 'And I think those aspects contribute to the health benefits and are critically important.'
