Filthy Barn Find 1971 Corvette 454 Rescued
Read the full story on Backfire News
For many aspiring barn find hunters, tracking down a 1971 Corvette 454 with the big block LS5 would be enough to make them think they've died and gone to heaven. But the funny thing with true barn finds, which this sports car is, comes from the fact they've been neglected for years on end.In other words, when you wash off all that magical barn find dust and start digging into them, you can find all kinds of problems. Rodents will chew wires, critters will build nests, frames will become rotting graham cracker, and you would have a huge mess on your hands.
Of course, Dennis Collins is familiar with all these risks. The man has been around the block more than a few times. Usually he films rescues, but the people who sold him this rare C3 Corvette didn't want to be on camera or have him film their barn for unmentioned reasons.
The first glimpse we get of the American sports car is it strapped to the trailer as they're hauling it back to the shop. The thing is winking with one headlight popped up, something we personally know all too well. It's also filthy, so you can't get a feel for the body's condition entirely.
Covered in a thick layer of grime that doesn't wash away in the rainstorm they drive through, the 'Vette needs to be power washed with some cleaner applied and allowed to soak in first.
While the '71 Corvette has been painted white but was originally gold, the interior looks to be the original black vinyl. The only apparent modification is an aftermarket steering wheel has been added. More importantly, it's a numbers-matching car, the LS5 bearing the same VIN as the tags on the door and dash.
Even though the thing is rough, the fiberglass appears to be in good shape and the engine does fire up, but it's in need of a good tune-up. Still, the C3 Corvette is in better condition than we initially feared, so we'll call this one a win.
Image via Dennis Collins/YouTube
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Newsweek
an hour ago
- Newsweek
Cadillac F1 Team Partners With Renowned Fashion Brand
Based on facts, either observed and verified firsthand by the reporter, or reported and verified from knowledgeable sources. Newsweek AI is in beta. Translations may contain inaccuracies—please refer to the original content. Months away from its official Formula One debut in 2026, the Cadillac F1 team has announced a partnership with the renowned fashion brand Tommy Hilfiger. This marks the new team's first sponsorship in the premier class of motorsports. Tommy Hilfiger is no stranger to F1, having ended its partnership with Mercedes at the end of the 2024 season. The collaboration with the sport's eleventh team as its official apparel partner marks the beginning of a new chapter in its F1 journey. Cadillac's entry into the sport was confirmed in March this year after receiving approvals from the FIA and Formula One Management (FOM). For the initial years, it will partner with Ferrari to procure its power engines for the new era of regulations starting next year, where F1 cars will be powered by an equal ratio of internal combustion and electric power. A general view of the atmosphere is seen during the Launch Party For Cadillac F1 Team at Queen Miami Beach on May 03, 2025 in Miami Beach, Florida. A general view of the atmosphere is seen during the Launch Party For Cadillac F1 Team at Queen Miami Beach on May 03, 2025 in Miami Beach, Cadillac F1 Addressing the new partnership with Tommy Hilfiger, Cadillac F1 team principal Graeme Lowdon said: "We are an American team representing one of the most iconic American brands of all time. "Tommy Hilfiger too is an American icon, and the brand's legacy in Formula 1 is unmatched. As we bring a bold new vision to the paddock, this partnership truly reflects the spirit of what we're building. "Together, we're not only racing, but driving innovation that will shape the future of both entertainment and engineering." In a separate report by Forbes, Lowdon explained why Tommy Hilfiger was a "natural fit" for Cadillac. He said: "Cadillac has a proud and storied racing history as far back as 1950 when they began competing at Le Mans at World Championship Level. "Tommy has known Formula 1 for a long time. It's the pinnacle of motorsport, like Cadillac is for luxury automobiles. Cadillac's brand values are bold, sophisticated, and optimistic. That was a natural fit with the Tommy Hilfiger brand. Combining this offers an ambitious, confident outlook. The chemistry, vision, and passion felt right from the start. Racing is about passion and desire to win." The announcement of Cadillac's partnership with Tommy Hilfiger arrives at a time when the fashion brand promotes its F1 The Movie APXGP Collection ahead of the release of the F1 movie on June 25 and June 27 in America. Addressing the partnership with the Cadillac F1 team, Tommy Hilfiger said: "These two iconic American brands come together with a colorful history in visual culture. I love racing's iconic graphics. The uniforms are very cool with patches, logos, and team names. It's rich in design territory. We had insight into the Cadillac team's design direction; it will look incredible across the collections. "I didn't see that coming in the earlier years. Formula 1 was automobiles and cars coming from Europe. Building out fanwear with our iconic prep with Cadillac's bold racing and motorsport motifs is an exciting playground to push the boundaries."
Forbes
2 hours ago
- Forbes
Test-Driving The GMC Canyon AT4X AEV
Front 3/4 view of the 2024 GMC Canyon AT4X AEV Edition in a field. A few years after the latest GMC Canyon hit dealership lots, I recently had the chance to thoroughly test-out the 2025 GMC Canyon AT4X AEV. There's good reasoning behind this dressed-up Chevy's long name: The AT4X is appointed from the factory with increased clearances and choice components to up its capability. The AEV part is actually an aftermarket supplier brought into the tier 1 parts chain; American Expedition Vehicles provides a variety of added equipment to bolster this top-spec Canyon's off-road-ability even further. In spite of sporting a powertrain that at first sounds like it'd be lacking, the end product is one of the most fun 4X4s that I've ever taken off the beaten path. Here's what $65,995 worth of an American-made, adventure-ready truck has to offer. Focused through and through. The highest-riding Canyon's appearance ensures nobody would ever assume it talks the talk but doesn't walk the walk. Big tires, big steel bumpers, big fender gaps, and a lifted ride height, as well as big dimensions compared to the previous-generation—there's more big about it than an '80s Peter Gabriel song. Additionally, its massive grille and sharp headlights fit into GMC's design language well and definitely add to its muscle-bound prowess. Inside, the interior is well-appointed, featuring a chic stitched contrasting leather, comfortable leather seating sporting embroidered AEV branding, and an aesthetically pleasing center console, dash, and touchscreen layout. From there, the amount of gloss black plastic trim throughout is par for the course on the new car market, and only a few surfaces are of a thin, cheap-feeling plastic. The gear selector, drivetrain dial, and buttons that lock and unlock the differences possess a substantial feel, too, which were a pleasant surprise. GMC's definitely stepped up its game in this area. Interior view of the 2024 GMC Canyon AT4X AEV Edition. Buttons are logically placed, too—including those that actuate its various drivetrain settings, more on that later—and the touchscreen and digital instrument cluster are of a reasonable size and run easy-to-use, lag-free software. However, I still have two criticisms. Firstly: the interior is a tad too nice. The jury is out on how many buyers will consistently put the AT4X AEV through its paces, but for those who do, and are even keen to outfit something for substantial overlanding duty, they might want to avoid dirtying it up with mud, dirt, and sand. But I can personally attest to it being surprisingly easy to clean: the massive rubber floor mats helped here, but otherwise it was easy to wash off the leather seats and blow out the sand after a long afternoon in the field. Secondly: its interior dimensions are weirdly cramped for this truck's size. With the seat set as low as possible, I just barely fit at six-foot-three, and couldn't imagine being comfortable in the backseat for very long. Small engine, large moxie. Being such a visual and dimensional bruiser, you'd think a thirsty GM V8 lived under the hood of the 2025 GMC Canyon AT4X AEV. But what's actually in there is far from it: power comes from a turbocharged 2.7-liter inline-four, hooked up to an eight-speed transmission with high and low range, plus power locking front and rear differentials. That may sound like not enough, but it's actually right at home. The previous, off-road-focused Canyon and its dressed-down Chevy Colorado sibling sported a turbo diesel inline-four of similar displacement, and it was a riot to rip around with. I was sad to find out that this powerplant is no longer available, but the gasoline 2.7 is still good fun. Despite sounding a bit strained and uninspiring at times, its 310 horsepower and impressive 430 pound-feet of torque suits the 4,970-pound AT4X well, and with a massive 21.4-gallon fuel tank to sip from, guarantees excellent range. This counts on lengthy off-road expeditions where gas stations may be few and far between, plus, fuel consumption becomes a real thing with the revs high in the low gear set while scrambling up steep climbs, and at high elevation. The little four-banger feels like it reaches peak torque just off idle, and its little turbo keeps the power on full blast all the way to redline, maximizing the lockers' effect. To sum it up: this lump of aluminum is very good at cosplaying as its sturdy diesel predecessor. With independent suspension up front and a conventional straight axle out back, there's no mistaking the way it rolls down the road as anything other than a pickup truck, but it does so quite comfortably due to the secret sauce that ties the suspension all together: Its Multimatic DSSV dampers. These are—hyperbole incoming—the most beautifully riding passive shock absorbers that I've ever experienced in any 4X4. Due to their intuitive way of routing shock fluid around inside, they give the AT4X such a good ride quality, yet the AT4X stays respectably planted under hard cornering. Then, they shrug off the stresses of ripping up and down trails with ease, and ensure that weight is always shifting across the axles as effectively and smoothly as possible. The 2025 GMC Canyon AT4X AEV American Expedition Vehicles is an authority in all-things capability in the off-roading/overlanding realm. With the AEV package, customers get front and rear steel bumpers with added tow provisions, as well as a substantial amount of underbody armoring to protect the body, frame, and various drivetrain components from the roughest terrain. Additionally, a host of interior auxiliary switches for connecting added lighting and other accessories are wired up and handsome 17-inch beadlock-ready wheels wrapped in meaty 35-inch Goodyear Wrangler Territory MT rubber fill out its massive wheel wells. Additionally, a full-size fifth wheel is secured to the bed for easy changes in case a sidewall gets cut—it inhibits rear visibility, but I was glad to have it while far, far away from any wheel and tire shop. This equipment, combined with the AT4X AEV's moxie-filled turbo-four and versatile drivetrain makes for one impressive spec. But it doesn't end there: Approach, breakover, and departure angles reach 38.2, 26.9, and 26 degrees, respectively, and ground clearance underneath its 131-inch wheelbase is a massive 12.2 inches, thanks to a 1.5-inch higher ride height over the standard AT4X. The 2025 GMC Canyon AT4X AEV I had the pleasure of feeling all of this out at one of Southern California's most beloved off-road areas, Rowher Flats, just north of Los Angeles. With a whole midweek afternoon in front of me, I decided to venture further into this stretch of the Castaic Mountains than I ever had before climbing up and over an entire mountain. The GMC Canyon AT4X AEV's whole package was simply brilliant. Jumping in and out of high and low range, enabling and disabling the lockers, and configuring GMC's intuitive hill descent control was all easy to figure out and took no time at all. This accommodates snap decisions based on quickly changing terrain features and conditions rather well. In terms of doing a lock-off—which is my new term for a race to see how long trucks take to lock and unlock their front or rear differentials—the 2025 Mercedes-Benz G550 G-Wagen has the Canyon beat, but not by much (for the record: this is a fun comparison and not an actual reason to spend double the money on the Benz). The 2025 GMC Canyon AT4X AEV And boy did the terrain change while crawling up, along, and down steep unpaved terra firma. The only moments of mild terror were some mildly cocky, overly-confident inputs while crawling down incredibly steep terrain—I definitely danced on the edge of this thing's maximum pitch angle. Otherwise, its chunky Goodyear rubber, locking differentials, and awesome chassis helped this beast push forward with so much ease. Its long wheelbase required making multi-point turns to properly line up for particularly steep moments on the trails' more narrow sections. But its massive array of front and rear camera angles accompanied sticking my head out the window and provided great resolution. My only gripe was a lack of visibility while cresting the top of steep climbs, as I wish I had more of a view of what laid ahead—I was surprised this was an oversight. Otherwise, the AEV went about the rest of my journey exhibiting nothing but assured confidence. The brakes were strong and enabled precision modulation, the chassis' ability to articulate and maximize its footing was solid, and it scoffed at any menacing trail I pointed it at. Rather than stressed and feeling worn out, I ascended towards the trail's end relaxed and happy to take in all of the scenery. For under $70,000 fully loaded, the 2025 GMC Canyon AT4X AEV is a top-shelf piece of comfortable machinery for those looking for a turn-key way of taking on tough terrain. The 2025 GMC Canyon AT4X AEV
Yahoo
2 hours ago
- Yahoo
Automotive Expert Joins New U. S. Steel Podcast
"Steel Stories" by U. S. Steel features Rebecca Lindland to kick off a new mini-series dedicated entirely to the future of mobility Topics covered include car buyer priorities, automotive design trends, and the benefits of steel PITTSBURGH, June 04, 2025--(BUSINESS WIRE)--"Steel Stories" by U. S. Steel shifts gears with a dynamic new episode featuring renowned automotive analyst and trend expert Rebecca Lindland, Managing Director, Automotive at Stagwell. With decades of experience tracking the evolution of the auto industry, Lindland joins host David Kirkpatrick for a fast-paced conversation on the technologies transforming today's vehicles — and the role American steel continues to play in driving safety, efficiency, and innovation. Listeners will get an inside look at how consumer demand for larger, safer, and more efficient vehicles is reshaping the automotive landscape. Lindland shares how the American steel industry is responding with next-generation materials like lightweight, high-strength steel paving the way for safer electric vehicles (EVs), hybrids, over-the-air updates and emerging autonomous technologies. "Durability, reliability, and safety — those are the table stakes," Lindland said. "Steel is the literal and figurative frame around it all." The curated episode is available now on your favorite podcast platform. For those who want even more, an extended Director's Cut is available on U. S. Steel's YouTube channel, featuring deeper conversations on EV infrastructure, future mobility trends, evolving consumer habits, and the enduring role of steel in modern vehicle design. The conversation marks the beginning of the podcast's deeper dive into the automotive world. Lindland will return as a guest host for an upcoming Steel Stories mini-series dedicated entirely to the future of mobility. The series will explore what's next for consumers, manufacturers, and materials – focusing on how design, innovation, and safety come together, with steel enabling it all. U. S. Steel plays a critical role in the automotive sector, delivering a broad portfolio of advanced steel products designed to meet the industry's rapidly evolving needs. Through close collaboration with automotive manufacturers, the company supports key priorities such as lightweighting, sustainability, and enhanced vehicle safety. U. S. Steel is also the only domestic steelmaker to operate an Automotive Research & Design Center in Troy, Michigan—strategically located near major auto manufacturers to foster innovation and accelerate development. About U. S. Steel Founded in 1901, U. S. Steel delivers profitable and sustainable steel solutions. Propelled by its talented employees and an unwavering focus on safety, U. S. Steel serves the automotive, construction, appliance, energy, containers, and packaging industries with high value-added steel products. Steel production begins with our competitively advantaged iron ore production capabilities which fuel our integrated steelmaking facilities and investments in electric arc furnaces. To help our customers create the best products with the fewest emissions, we are committed to reaching net-zero greenhouse gas emissions by 2050. U. S. Steel is at the forefront of creating steels that are stronger, lighter, and better for the environment. This includes our proprietary XG3® advanced high-strength steel, verdeX® steel produced with 70-80% lower CO2 emissions with a recycled content of up to 90%, and ultra-thin lightweight InduX™ steel for electric vehicles, generators, and transformers. U. S. Steel maintains operations across the United States and in Central Europe and is headquartered in Pittsburgh, Pennsylvania. For more information, please visit and follow U. S. Steel on LinkedIn, Instagram, Facebook, and X. View source version on Contacts Corporate CommunicationsT – (412) 433-1300E – media@ Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
