If the Switch 2 Screen Isn't an OLED, That's Actually Fine!
LCD panels today have better color, contrast, refresh rates than when the original Switch launched.
Keep your OLED Switch for certain games.
A new generation of Nintendo console is releasing in 2025, and speculation is rife about this device, which has only a few confirmed details. A big question on everyone's lips is whether the new Switch will debut with an OLED screen, but if it doesn't that's not a big deal!
You'll see plenty of folks online talk about the Switch 2 screen being an LCD model as if it's a done deal. The truth, however, is that as I write this, no one knows what screen technology will be in the launch model of the Switch 2. Nintendo has said nothing to confirm or deny the speculation and its all based on leaks.
I'm not going to comment on whether these "leaks" or rumors have any merit to them, but if it happens that the new Switch has an LCD and not an OLED panel, I really don't think it's a reason to skip it.
I think one of the big reasons people may not be happy with the idea that the Switch 2 isn't packing an OLED comes down to how awful the LCD is on the original Switch. It's not just a bad LCD with poor color and viewing angles today, it was a bad LCD panel when the Switch launched. Of course, Nintendo had to keep the price of the console reasonable, and it did the job, but it was not pleasant to look at. I still have my launch Switch, which I passed down to my wife when I got my OLED model, and the stark difference in quality between the two is shocking.
The thing is, even "bad" LCD panels today are far better than what we saw in the original Switch, and modern IPS panels look legitimately amazing.
Putting the IPS panel in my Lenovo Legion Go next to my Switch OLED, the OLED definitely has the edge in color and contrast, but the gap isn't significant and I'd certainly fail to notice any issues if they weren't side-by-side. The photograph doesn't do it justice either, in-person that LCD looks great.
The color, contrast, and responsiveness advantages of OLED technology is real, but LCD panels can be imbued with plenty of tricks too. If Nintendo implemented VRR (Variable Refresh Rate) technology in the Switch 2's display, it would be a massive boon to playability. Likewise, I would be shocked if it wasn't at least a 120Hz panel. We also don't know yet what the resolution of the panel will be, but if it is a 1080p panel, then it's still a notable upgrade compared to the 720p panel in the OLED Switch.
If I had to trade my OLED Switch for a modern LCD model with VRR, high refresh rates, and a higher resolution, I think that would be an overall upgrade and one worth having.
Assuming I can actually get one, I plan on buying a Switch 2, but I do not plan on selling my OLED Switch if the Switch 2 is an LCD model. There are some games, such as Cuphead and Ori and the Blind Forest that won't run any better on a more powerful handheld, and benefit from OLED technology thanks to their lush 2D graphics.
So, for me, there's room for my OLED Switch and Switch 2 to co-exist. Some game would still be better to play on the original machine. Besides, we do know that the Switch 2 will be quite a bit larger than the OLED Switch and big handhelds are certainly the trend now. So I think the smaller Switch OLED might end up travelling with me while the Switch 2 stays at home, more often than not.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Business Insider
16 hours ago
- Business Insider
Nintendo Stock (NTDOF) Slips Despite Double Switch 2 Screens Patent
Nintendo (NTDOF) stock was on the move Friday alongside an updated patent from the video game company. This new patent highlights a potential additional screen that could be added to one of its gaming devices, likely the Switch 2. The second screen in the patent would attach to the top of the console, allowing it to display two screens at once. Elevate Your Investing Strategy: Take advantage of TipRanks Premium at 50% off! Unlock powerful investing tools, advanced data, and expert analyst insights to help you invest with confidence. A possible use case for this would be playing Nintendo DS or 3DS games on the Switch 2. Nintendo already has emulation of other game consoles available on the Switch 2 through its Nintendo Online subscription service, such as Nintendo, Super Nintendo, Game Boy, Game Boy Advance, and most recently, GameCube. While the idea of purchasing a second screen to play DS games on the Switch 2 may seem odd to some, it's not too different from current practices. Nintendo sells updated versions of classic Nintendo controllers to its Online subscribers. The second screen could be sold through this same service. Nintendo could also allow DS emulation on the Switch via a vertical display orientation for those who want to play the games but not purchase the second screen. Nintendo Stock Movement Today Nintendo stock was down 0.77% on Friday, following a rally in earlier trading. Despite the dip, NTDOF stock has increased 65.55% year-to-date and 78.95% over the past 12 months. The success of the Switch 2 has been a major positive catalyst for the company's shares. Is Nintendo Stock a Buy, Sell, or Hold? Turning to Wall Street, the analysts' consensus rating for Nintendo is Moderate Buy, based on nine Buy, two Hold, and a single Sell rating over the past three months. With that comes an average NTDOF stock price target of $98.61, representing a potential 2.29% upside for the shares.
Digital Trends
a day ago
- Digital Trends
The microSD card in your Nintendo Switch is rubbish compared to this new solution
MicroSD cards have long been the go-to choice for compact, removable storage, finding their way into everything from cameras and drones to gaming handhelds like the newly launched Nintendo Switch 2. Yet while the microSD Express standard has managed to push speeds up to 985 MB/s, it's still far from the performance offered by some of the best SSDs. However, a new storage format spotted in China aims to close that gap, delivering SSD-grade speeds in a footprint barely larger than a microSD card. Measuring at just 15 x 17 mm, the Mini SSD from storage manufacturer Biwin was first showcased at Computex early this year. The drive is barely larger than a SIM card, yet it's said to be capable of sequential reads up to 3,700 MB/s and writes up to 3,400 MB/s over a PCIe 4.0 x2 interface. In comparison, the microSD Express which is used by the new Nintendo Switch 2 tops out at 985 MB/s while full-sized SD Express cards can theoretically reach 3,940 MB/s. Recommended Videos Available in 512GB, 1TB, and 2TB capacity options, it also boasts IP68 dust and water resistance, along with drop protection of up to three meters. This level of durability means that one can easily carry it around, use it in the field, or swap between devices without the need of any special care. While Biwin refers to the drive as the Mini SSD, it is also codenamed '1517' which is the same as its physical dimensions. This particular naming approach is similar to how JEDEC, the global standards body for the microelectronics industry, designates other M.2 SSD sizes such as 2280, 2242, and 2230. For now, the Mini SSD remains a proprietary format. For it to achieve widespread adoption, it would require support from multiple manufacturers and industries, or formal recognition by a standards body. Without such backing, it risks remaining a niche innovation. The good news is that support has already begun starting with the upcoming GPD Win 5 handheld update with AMD's Strix Halo processor, and the OneXPlayer Super X hybrid laptop, where its tiny footprint allows more room for bigger batteries and better cooling. It's also where this Mini SSD was first spotted in the wild, as reported by The Verge, giving us a glimpse of its potential before it even hits mainstream devices. The best handheld gaming PCs are bound to be early adopters, but imagine smartphones, laptops, cameras, and even desktop PCs enjoying full SSD speeds without resorting to bulky expansion bays. Video editors could shoot and transfer 8K footage, game consoles could ship slimmer, cooler, and quieter, while still offering relatively fast load times. The possibilities also extend into industrial and enterprise gear where drones could capture terabytes of high-resolution imagery. If the performance claims hold true, the Mini SSD or 1517, could mark an important step in storage technology, offering generous data transfer speeds and capacity in an exceptionally compact form factor. While broader industry support will determine whether it becomes a mainstream standard or remains a specialized solution, its early appearances in upcoming devices suggests promising potential.
Android Authority
a day ago
- Android Authority
dbrand's Joy-Con grip nightmare is coming to an end as it starts shipping replacements
Oliver Cragg / Android Authority TL;DR Accessory maker dbrand has officially started shipping its Joy-Lock Grips. The replacement grips are designed so that Joy-Cons won't detach from the Switch 2, even when 87% of the console's weight is put on the magnetic hinge. The replacement kit also includes a set of Dock Adapter Friction Pads. Accessory maker dbrand is well-known for its high-quality products. However, the company recently found itself embroiled in controversy shortly after releasing a case for the Nintendo Switch 2, called the Killswitch. The problem was that there was a flaw in the case's controller grips that would cause the Joy-Cons to detach from the console if not held correctly. After initially placing blame on its customers, dbrand did an about-face and announced it had found a solution to the problem. Now this drawn-out saga is finally reaching its conclusion. Don't want to miss the best from Android Authority? Set us as a preferred source in Google Search to support us and make sure you never miss our latest exclusive reports, expert analysis, and much more. dbrand has announced that it has officially started shipping its replacement Joy-Con grips. The company calls these replacement controller covers Joy-Lock Grips, as they feature a new design to keep the controllers attached. According to dbrand, the Joy-Lock Grips were engineered so that Joy-Cons stay attached to the Switch 2, even when 87% of the console's weight is put on the magnetic hinge. In July, the company told customers that they would be able to claim their Joy-Lock replacements for free. To that end, dbrand says it began sending out emails to all Killswitch customers last week. The Joy-Lock Grips are part of a replacement kit that also includes a set of Dock Adapter Friction Pads. These friction pads solve a problem where users were unable to remove their Switch 2 from dbrand's Dock Adapter with one hand. Before After Installing the grips on your controllers and the friction pads on your Dock Adapter should be fairly straightforward. But if you need instructions, the company has released a tutorial video you can watch. Follow
