Here's when the tri-fold Huawei Mate XTs is coming and how much it should cost
Now, a new source purports to bring us the exact launch date for the Mate XTs, which is apparently what the new device will be called. It will allegedly be presented on September 12, which is the same week that Apple will launch the iPhone 17 family, according to a recent rumor. Huawei Mate XT
That's interesting timing to say the least. If true, perhaps Huawei wants to steal some of Apple's thunder, so to speak, which it may very well succeed in doing inside China, where it reigns supreme.
The Mate XTs is rumored to cost around CNY 20,000, which at the current exchange rates means $2,786 or €2,422. For reference, note that the original Mate XT started at CNY 19,999, so its successor will be priced about the same.
The Mate XTs will compete head-on in the Chinese market with Samsung's upcoming tri-fold smartphone, which is going to be announced later this year and has been rumored to only launch in Korea and China at first. It remains to be seen what that model's pricing will be. Huawei Mate XT Ultimate
Source 1 (in Chinese) | Source 2 (in Chinese) | Via
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Phone Arena
22 minutes ago
- Phone Arena
Move to 2nm process node will have TSMC raking in the dough
TSMC is expected to have 60,000 2nm wafers ready each month from four fabs. These facilities will be running at full capacity, and the price of these wafers is expected to rise 50% to $30,000 for each wafer from the $20,000 price TSMC charged for 3nm wafers. Reports indicate that TSMC is seeing strong demand for 2nm production from AI companies as tapeouts for the first two years of 2nm are higher than 3nm and 5nm during those process nodes' first two years. A tapeout is when the chip designer (like Qualcomm, Apple, and Nvidia, for example) sends a file with the final chip design to the foundry. It marks the start of production of a particular chip. We've often pointed out how TSMC's client list contains the who's who of tech giants, including the three aforementioned names we mentioned at the start of this paragraph. Most of these companies are believed to be working with the foundry on 2nm chips. Why is the process node used by a foundry so important? The key thing to remember is that as the process node numbers decline, the size of the transistors used in a chip gets smaller. As the size of transistors shrinks, the transistor count, the number of transistors inside the component, increases. Even more important, the transistor density increases. This metric measures how many millions of transistors are shoehorned into the chip per square millimeter (MTr/mm². The Transistor density number is very important because the higher the figure is, the more powerful and energy efficient the chip is. Certain transistor density numbers also coincide with specific process nodes. Look at these figures: TSMC's 5nm: Approximately 130-170 MTr/mm² TSMC's 3nm: Approximately 190-220 MTr/mm² What this is telling us is thanks to the use of smaller transistors with lower process nodes, 29% to 46% more transistors can be packed into a 3nm chip compared to a 5nm chip manufactured by TSMC. This indicates why a more advanced 3nm chip will typically outperform a 5nm chip while consuming less energy. TSMC will also debut its Gate-All-Around (GAA) transistors with its 2nm process node. With GAA, the gate wraps completely around the channel, reducing current leakage and improving the drive current. Chips made using GAA transistors will show better performance and use less energy. After 2nm, TSMC will start mass production of 1.4nm chips in 2028. However, TSMC's new naming scheme will replace nanometers with angstroms (Å), with 1 nanometer equaling 10 angstroms. The 1.4nm process will therefore be referred to as A14.
GSM Arena
an hour ago
- GSM Arena
Redmi 15C 5G is still on the way, new certification reveals its charging power
Redmi quietly launched the 15, 15 5G, and 15C at the beginning of this month, but for some reason chose to skip the 15C 5G. This device, however, is still on the way, as evidenced by its recent certification for sale in China, courtesy of 3C. The phone was certified with a 33W charger, so it stands to reason that it will be able to charge at up to 33W. It's likely to be made official in China later this month. Global availability isn't yet a given. It was certified by 3C with the model number 2508CRN2BC. According to past rumors, the Redmi 15C 5G has a 6.9-inch LCD screen with HD+ resolution and 120 Hz refresh rate, the Dimensity 6300 SoC at the helm, 4GB of RAM, 128/256GB of storage, and a 6,000 mAh battery. The handset has a 50 MP main camera and an 8 MP selfie snapper. It should run Android 15 from day one, with Xiaomi's HyperOS 2.0 on top. It also has a side-mounted fingerprint sensor embedded in the power button. It's 8.2 mm thin and weighs 211g. It will be offered in green, purple, and black. Via
GSM Arena
an hour ago
- GSM Arena
Redmi 15C 5G is still on the way, new certification reveals its charging power Comments
Redmi 15C 5G is still on the way, new certification reveals its charging power Comments
