Samsung Galaxy Tab S11 Ultra: Specs, Price, and Release Date
Watch this video on YouTube. Key Features and Upgrades
Samsung has carefully refined the Galaxy Tab S11 Ultra to strike a balance between performance, efficiency, and reliability. While the changes may not be innovative, they target the areas that matter most to users, making sure a smoother and more dependable experience. Processor: The Galaxy Tab S11 Ultra is powered by the Dimensity 9400 Plus chipset, a innovative processor that emphasizes both performance and energy efficiency. This chipset is engineered to handle demanding tasks such as multitasking, gaming, and media consumption with ease, while optimizing resource usage to extend battery life.
The Galaxy Tab S11 Ultra is powered by the Dimensity 9400 Plus chipset, a innovative processor that emphasizes both performance and energy efficiency. This chipset is engineered to handle demanding tasks such as multitasking, gaming, and media consumption with ease, while optimizing resource usage to extend battery life. Battery Capacity: Equipped with an 11,600 mAh battery, the Galaxy Tab S11 Ultra offers a slight but meaningful improvement over the 11,200 mAh battery of the Galaxy Tab S10 Ultra. This enhancement, combined with the energy-efficient processor, is expected to provide longer usage times, making it ideal for extended work sessions, streaming, or travel.
Equipped with an 11,600 mAh battery, the Galaxy Tab S11 Ultra offers a slight but meaningful improvement over the 11,200 mAh battery of the Galaxy Tab S10 Ultra. This enhancement, combined with the energy-efficient processor, is expected to provide longer usage times, making it ideal for extended work sessions, streaming, or travel. Charging Speed: Samsung has retained the 45W fast charging capability from the previous generation. While this doesn't introduce new advancements in charging technology, it ensures consistent and reliable performance, allowing users to quickly recharge their device and get back to their tasks.
These upgrades reflect Samsung's commitment to addressing user priorities, focusing on practical improvements that enhance everyday usability. 3C Certification and Its Significance
The Galaxy Tab S11 Ultra has recently passed through China's 3C certification process, a critical step that confirms its readiness for launch. This certification verifies key specifications, such as the tablet's charging speed and battery capacity, and signals that Samsung is in the final stages of preparing the device for release. While routine, this milestone is an essential part of the product development cycle, making sure that the Galaxy Tab S11 Ultra meets regulatory standards and is equipped to deliver on its promises. Model Variants in the Galaxy Tab S11 Series
Samsung is expected to introduce a diverse lineup within the Galaxy Tab S11 series, catering to a broad spectrum of users with varying needs and budgets. The series is likely to include the following models: Galaxy Tab S11: The standard model, offering a well-rounded mix of performance and affordability, suitable for general users.
The standard model, offering a well-rounded mix of performance and affordability, suitable for general users. Galaxy Tab S11 Ultra: The premium flagship model, featuring advanced specifications and enhancements for power users and professionals.
The premium flagship model, featuring advanced specifications and enhancements for power users and professionals. Galaxy Tab S11 Lite: A budget-friendly option designed for users who prioritize essential functionality without the premium price tag.
This range of options underscores Samsung's strategy to appeal to a wide audience, making sure that there is a device tailored to every user's preferences and requirements. Practical Enhancements for Everyday Use
The Galaxy Tab S11 Ultra focuses on delivering incremental yet meaningful improvements that enhance its practicality for daily use. The combination of the Dimensity 9400 Plus processor and the slightly larger battery addresses two critical aspects: performance and longevity. These upgrades are particularly beneficial for users who rely on their tablets for multitasking, streaming, or productivity tasks. By refining these core features, Samsung aims to provide a device that is not only powerful but also dependable for a variety of scenarios. A Balanced Evolution in Samsung's Tablet Lineup
The Samsung Galaxy Tab S11 Ultra represents a thoughtful evolution in the company's tablet offerings. By enhancing key features such as processing power, battery capacity, and charging reliability, Samsung has crafted a device that aligns with the needs of today's users. While it doesn't introduce new innovations, the Galaxy Tab S11 Ultra focuses on practical upgrades that improve the overall user experience. With its launch expected soon, this flagship model is set to join a series that offers a compelling mix of performance, versatility, and value. Whether you're considering the Ultra model for its premium features or exploring other variants in the lineup, the Galaxy Tab S11 series promises to deliver options that cater to a wide range of preferences and needs.
Find more information on Samsung Galaxy Tab S11 Ultra by browsing our extensive range of articles, guides and tutorials.
Source & Image Credit: Demon's Tech Filed Under: Android News, Tablet News, Top News
Latest Geeky Gadgets Deals
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
The Guardian
2 hours ago
- The Guardian
Return of the flip phone: does Apple's foldable iPhone signal a new era in design?
Back in 2005, nothing felt more high-powered and sophisticated than ending a call by snapping shut a clamshell flip phone. Now, two decades since they hit peak popularity, they're back – with Apple rumoured to be working on its first ever flip phone. Little is known about how it will look. It could resemble Samsung's Flip design – closer to a 2000s-style clamshell phone – or its Fold, more like a foldable iPad. A JPMorgan report has suggested that the first foldable iPhone will be revealed in September 2026, priced at $1,999 (£1,474), and will likely expand a foldable phone market expected to reach 19m units in 2025. The rectangular tablet has been a mainstay of phone design for the last 15 years, but could Apple betting on the flip phone be a sign that's about to change? Tech experts said the new product launch probably reflected the fact that people now mostly access the internet on their phones, rather than laptops or tablets, and are looking for a device that optimises that experience – but the high price point suggests it will remain a premium product. 'Apple and all other smartphone makers are somewhat stymied by the fact the smartphone has become somewhat of a boring category – it's absolutely essential in people's daily lives, but it no longer has the excitement of the next big thing,' said Ben Wood, an analyst at the tech consultancy CCS Insight. This is why Apple has been reaching for new designs that can get people talking – for example, the ultra-thin iPhone, expected to be launched in September. Wood thinks Apple is entering the foldable market because other companies have experimented first. Samsung's initial Galaxy Fold designs were bedevilled by screen problems, but next week's Galaxy Flip and Fold 7 triple release, featuring slimmer designs and bigger screens, is expected to represent the 'next generation' of foldable phones, which Samsung will be hoping reverses the flatlining sales in 2024. 'Apple is rarely first to anything – it's not typically a company that dives in with both feet – it likes to take its time, see how it can refine and optimise it, and deliver the best, most reliable experience, then it jumps,' Wood said. He noted that Samsung's flip phone has been more popular than the fold model 'because it's cheaper and has captured imagination of the population who like the idea of having something different from everyone else'. Sign up to TechScape A weekly dive in to how technology is shaping our lives after newsletter promotion But he thinks that Apple producing a foldable mini-tablet has the most potential to 'move the needle' by giving people the opportunity to unfold a larger screen where they can easily watch videos, show off photos and browse documents when working remotely. Margarita Panayiotou, a tech researcher at the University of Manchester, said academic research had identified that people prefer bigger screens for browsing and gaming. This, combined with the fact that young people, especially, tend to use smartphones to go online, suggests that the foldable design could offer an ideal compromise for future consumers. Prof Ben Carter, who researches how smartphones impact our lives at King's College London, agreed that video watching was 'one of the wins' for foldable phones, especially since videos constitute a growing proportion of the content that people consume. Foldable phones can have larger screens and can also be propped up for easier viewing. He thought there could be mental health benefits to a design resembling a 'mini-laptop that you can close down'. His research shows that disabling notifications is highly effective in reducing screen time and tackling smartphone addiction. If the screen is not visible, it removes the 'variable reward scheme' – the same process by which gambling addiction works, whereby not knowing when you will receive a reward makes something more compelling. 'If you can switch it off, more like a laptop, that distraction has gone,' he said, though he noted there waws not yet evidence that people are using foldable phones in this way. This might be especially beneficial for children, who receive on average more than 200 notifications a day – though the high price point of foldable phones makes it unlikely that many will have access to them until their parents pass on secondhand models several years after launch. Prof David Ellis, the chair of behavioural science at the University of Bath, said that other draws include the fact that screens are better protected and fit into a smaller pocket, as well as the 'sense of nostalgia that comes with a flip phone'. But he added that it might not be the gamechanger people are expecting: Apple doesn't have a '100% success rate – the Vision Pro [headset] has been a spectacular failure'.
The Independent
8 hours ago
- The Independent
Bambu Lab H2D 3D printer review: Your own personal manufacturing hub
Setting up the H2D couldn't be easier. Unlike the fiddly builds of older 3D printers, this machine arrives almost fully assembled straight out of the box. Simply place the AMS unit (the box that holds and automatically feeds the filament into the printer) on top, connect the tubes and cables at the back, and power up. The H2D then takes care of all calibration and setup, guiding you step-by-step through the entire process, including installing the filament. This is one of the first printers to offer up to five filaments out of the box – four in the AMS multifilament unit and one for standard or specialist materials on the side. These specialist materials, such as carbon-fill and TPU (thermoplastic polyurethane), put far greater demands on printers but offer more flexibility, especially for professional use. I dived straight in and started printing the benchmarks. One of the big advantages here is that the Bambu Lab software, BambuStudio, is straightforward to use, with plenty of online help to get you started. Compatible with both Mac and PC, you can use it with your computer connected directly, or, if you have the printer in a workshop, you can operate it remotely through your home network. When the H2D laser full combo was announced, many of us hoped for a true multi-toolhead 3D printer, but at the moment, only the Original Prusa XL offers this potential with four tool heads. While the H2D is a multi-toolhead machine, those additional toolheads are modules that clamp onto the front of the main print head. These include the laser, cutter, and plotter modules. The always-in-place 3D printhead features two nozzles, meaning two filaments are always ready to go, double the usual amount, but less than many of us in the community had hoped for. Why are more heads better than one? Well, it means there is less material waste and more speed, so two nozzles in one toolhead is a good halfway house. The waste issue really only becomes apparent when a third material is introduced, as one filament has to be retracted so the new filament can be used. As the filament swap is being managed and to avoid cross-contamination, the old and then new filament are purged to clear the nozzle, and this is where the filament waste can start to stack up. For the majority of the test, I placed the black filaments on the outer feeding spool, as it was the most commonly used, and this fed into the left-hand nozzle, cutting down on retractions and purging, with only the filaments in the AMS going through the right-hand nozzle needing to purge as they swapped. When it comes to the more specialist materials, such as the rubberised material TPU, these can't go through the AMS and must go through the left nozzle supplied by the outer spool. The issue here is that the setup to get TPU printing requires the stretchy filament to be rerouted through the back of the machine through a third hole, which can prove fiddly, however good the end result is. With standard materials such as PETG (polyethylene terephthalate glycol-modified), PLA (polylactic acid) and ABS (acrylonitrile butadiene styrene), this machine is highly optimised, so print failures were virtually non-existent during the initial tests. To put the idea of using the H2D as a personal manufacturing hub to the test, I designed a simple GoPro-style handlebar mount. Multiple copies of the design were printed across the platform in a high-impact material, ASA (acrylonitrile styrene acrylate), which is both water- and UV-resistant, making it ideal for small-scale projects. The STL (stereolithography) files that I had created in a computer-aided design (CAD) application were imported directly into BambuStudio and then sent through the network to the machine. The total time for 28 units to print was one day and 11 hours, so it is by no means fast, but still quicker and cheaper than having tooling made for injection moulding. Once the print had finished, it was time to swap the tool head to create the packaging. The cutter, plotter and laser all use a new piece of software called Bambu Suite, which, like Studio, is well laid out, but you'll probably need to spend some time familiarising yourself with the layout before diving in. The next step was to create a product box. To start, I installed the pen head, which clamps in front of the 3D print head and, in turn, the cutter. Then, the graphics and meshes were loaded into the Bambu Suite software, everything was lined up, and then all that was left to do was hit go. The pen got to work, drawing on the card to create simple graphics. Each pen has one colour, but swapping for another is quick and easy if you want multiple shades on your material. Once the graphics were finished, I swapped the pen for the cutter tool to cut out the box shapes, then manually glued them together. With everything set up in the Bambu software, once I'd hit go, each box was cut out perfectly and, unlike laser cutting, there was no scorching – just clean, precise lines. The whole process of producing 28 GoPro-style mounts and accompanying packaging took about two days, although most of that time was spent printing. In reality, the active time is mostly spent laying things out in the Bambu Lab software and then assembling the boxes. A major part of this machine is the laser cutter and engraver. If you want to sell in shops or at events, you'll need a display to show off your products. Swapping out the toolhead, removing the cutter and replacing it with the laser cutter takes just a couple of minutes. Using 3mm basewood ply, I laid out my design in the Bambu Lab software and sent it through to the H2D – another streamlined process. Once the laser finishes cutting safely in its enclosed environment, the basewood can be removed. The parts push out and assemble easily with a bit of PVA glue, and I used the engraver to add a logo to the display, for a touch of personalisation. When using the laser engraver, you do need an extractor. Bambu Lab makes its own, which I used for this review, with the filtration system helping to cut down fumes from both the laser and 3D printing processes.
The Guardian
9 hours ago
- The Guardian
Box, run, crash: China's humanoid robot games show advances and limitations
A quick left hook, a front kick to the chest, a few criss-cross jabs, and the crowd cheers. But it is not kickboxing prowess that concludes the match. It is an attempted roundhouse kick that squarely misses its target, sending the kickboxer from a top university team tumbling to the floor. While traditional kickboxing comes with the risk of blood, sweat and serious head injuries, the competitors in Friday's match at the inaugural World Humanoid Robot Games in Beijing faced a different set of challenges. Balance, battery life and a sense of philosophical purpose being among them. The kickboxers, pint-sized humanoid robots entered by teams from leading Chinese technological universities, are part of a jamboree of humanoid events taking place at China's latest technology event. After spectators in the 12,000-seater National Speed Skating Oval, built for the 2022 Winter Olympics, stood for the Chinese national anthem on Friday morning, the government-backed games began. 'I came here out of curiosity,' said Hong Yun, a 58-year-old retired engineer, sat in the front row. Seeing the robots race was 'much more exciting than seeing real humans', Hong added. The games put on display China's prowess in humanoid robotics, a technological field that has been pushed to the forefront of the country's artificial intelligence industry. The hype machine is in full swing. As well as kickboxing, humanoids participated in athletics, football and dance competitions. One robot had to drop out of the 1500-metre because its head flew off partway round the course. 'Keeping [the head] balanced while in movement is the biggest challenge for us,' said Wang Ziyi, a 19-year-old student from Beijing Union University, who was part of the team that entered the robot. Ever since a troupe of humanoid dancing robots took the stage at the 2025 Spring Festival Gala, a televised lunar new year's celebration viewed nearly 17bn times online, Beijing has been enthusiastically pushing the adoption of 'embodied AI' – an industry that was singled out in this year's government work report in March. The social-media-friendly events reflect a more serious geopolitical reality: an intensifying US-China technological competition that could reshape the frontiers of AI. The technology has become a lightning rod for relations between the two countries. And while the US still has the lead on frontier research, owing in part to Washington's restrictions on the export of cutting-edge chips to China, Beijing is going all-in on real life applications, such as robotics. Several cities, including Beijing and Shanghai, have established 10bn yuan (£1bn) robotics industry funds. In January, the state-owned Bank of China announced plans for a 1tn yuan of financial support to the AI industry over the next five years. 'If there is an area where [Beijing] thinks that China is ahead, or could be positioned as a world leader, then they really want to draw attention to that area,' said Dr Kyle Chan, a researcher at Princeton University. There is something strangely ominous about seeing jerky, human-like robots with two arms, two legs, and blank heads being dragged out of the ring to be recharged by their human handlers. When it comes to humanoids, the Chinese industry has many advantages. Although US companies such as Tesla and Boston Dynamics are still seen as the overall market leaders, several Chinese firms such as UBTech and Unitree Robotics – which supplied the boxing robots in Friday's games – are catching up. Tesla relies on China for many of the parts needed to build the company's physical humanoids. The US investment bank Morgan Stanley estimates that China-based supply chains produce robots at a third of the cost of non-China suppliers. 'It appears to be very difficult to entirely decouple from China in this space,' wrote Sheng Zhong, the bank's head of China industrials research, in a recent note. As well as generating positive publicity on social media, China views humanoids as being part of the solution to the problems created by the country's ageing population and shrinking workforce. A recent article in People's Daily, a mouthpiece of the Chinese Communist party, said robots could offer practical and emotional support for older people. 'The vision of robot-assisted elderly care is not far away,' it said. Humanoid robots could also take the place of employees on factory lines as China tries to retrain and redeploy its workforce into more hi-tech jobs. But for all the hype, there is a big gap between humanoids stumbling over footballs and reliably handling daily tasks. Safely interacting with vulnerable humans would be another leap. 'The home is probably one of the last places you'll ever find a humanoid robot because of safety,' said Chan. 'My general view on the whole humanoid explosion … is honestly a bit of scepticism.' Two of the biggest barriers to the technology being useful outside of PR stunts are the complexity of the human-built environment and the hands needed to navigate it. While other forms of AI, such as large language models, can be trained using reams of digital data, there are much smaller datasets available for training an algorithm on how to walk through crowded restaurants or up and down flights of stairs. Although China's efforts to get robots out into the real world can help companies to harvest more data, it is still a big bottleneck in the industry, Chan said. Dr Jonathan Aitken, a robotics teacher at the University of Sheffield, agreed. 'The state of AI is nowhere near seeing humanoids operating out of uncontrolled environments,' he said. And while robots jumping and kicking looks impressive, mundane daily tasks such as handling a kitchen knife or folding laundry requires dexterous hands, a skill technology companies have yet to crack. A human hand has about 27 'degrees of freedom' – ie, independent movements through space. Tesla's Optimus humanoid, one of the most advanced models on the market, has 22. Still, China has beat the odds before when it comes to turbocharged advances. Just 10 years ago, the country exported fewer than 375,000 cars a year. Now China is the world's biggest automobile supplier, shipping nearly 6m vehicles annually. The European Union has increased tariffs on Chinese-built electric vehicles in an attempt to stem the flow. In China, the political and public will is firmly behind the humanoids. Zhan Guangtao came to the humanoid games with her two daughters on Friday, after her elder child's school gave them free tickets. 'It's good to have my children in touch with the world's most advanced robotics,' Zhan said. 'Exposing them to hi-tech will broaden their horizons.' Additional research by Lillian Yang
