Diabetes Drug Tied to Decreased Dementia Risk in T2D
TOPLINE:
Semaglutide was associated with a 20%-46% reduced risk for Alzheimer's disease (AD)-related dementia in patients with type 2 diabetes (T2D) compared with other antidiabetic medications, with a particularly strong protective effect against vascular dementia, new research showed.
METHODOLOGY:
Researchers examined electronic health records (EHRs) of more than 1.7 million US adults with T2D with or without obesity and with no prior diagnosis of AD or AD-related dementia.
They compared semaglutide (n = 64,267 users) to seven other antidiabetic medications (n = 1,646,728 users) on the first-time diagnosis of AD-related dementia, as well as the subtypes of vascular dementia, frontotemporal dementia (FTD), and Lewy body dementia, during a 3-year follow-up.
The other antidiabetic medications included insulin, metformin, DPP-4 inhibitors, SGLT2 inhibitors, sulfonylurea, thiazolidinedione, and first-generation GLP-1 receptor agonists (albiglutide, dulaglutide, exenatide, liraglutide, and lixisenatide).
Secondary outcomes included prescriptions of dementia-related medications.
TAKEAWAY:
Semaglutide was associated with a significantly reduced risk for AD-related dementia compared to insulin (hazard ratio [HR], 0.54), metformin (HR, 0.67), and older GLP-1 receptor agonists (HR, 0.80).
Protection against vascular dementia was also greater for semaglutide compared to insulin (HR, 0.48), metformin (HR, 0.55), and GLP-1 receptor agonists (HR, 0.67). No significant associations were found between the use of semaglutide and the risk for FTD or Lewy body dementia.
The link between semaglutide and reduced AD-related dementia risk vs insulin, metformin, and GLP-1 receptor agonists was stronger in younger adults (mean age, 51.7 years) compared to older adults (mean age, 70.9 years), with risk reductions ranging from 32% to 56% vs 20% to 39%.
The use of semaglutide vs other antidiabetic medications was associated with significantly fewer prescriptions of dementia-related medications.
IN PRACTICE:
'There is no cure or effective treatment for dementia, so this new study provides real-world evidence for its potential impact on preventing or slowing dementia development among at high-risk population,' Rong Xu, Case Western Reserve University School of Medicine, Cleveland, said in a press release.
'Future works are needed to establish causal relationships through randomized clinical trials and to characterize the underlying mechanisms,' the investigators wrote.
SOURCE:
This study was led by William Wang, Case Western Reserve University School of Medicine, Cleveland. It was published online on June 24 in the Journal of Alzheimer's Disease.
LIMITATIONS:
This retrospective, observational, EHR-based study was limited by potential over-, under-, or misdiagnosis; unmeasured confounders; and a short 3-year follow-up period. Diagnosis of AD-related dementia relied on International Classification of Diseases, 10th Revision codes and prescription data, which may have lacked precision. This study also lacked data on medication adherence, cognitive function tracking, and genetic profiles, and could not fully adjust for variation of healthcare use.
DISCLOSURES:
This study was funded by grants from the National Institute on Aging and the National Center for Advancing Translational Sciences. One investigator reported being the editor in chief of the publishing journal but was not involved in the peer-review process. The other investigators reported having no relevant financial conflicts.
This article was created using several editorial tools, including AI, as part of the process. Human editors reviewed this content before publication.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CNET
an hour ago
- CNET
Best Cheap Mattresses on Walmart for 2025
A glimpse into one of the large storage spaces at our testing facility. Aly Lopez/CNET CNET's team of sleep experts has spent years testing, reviewing, cutting open and researching beds. Collectively, we've tested well over 300 beds. All the testing happens in our 6,000-square-foot mattress warehouse in Reno, Nevada, which includes two mock bedrooms we use to film our reviews and test beds. Our testing approach to mattresses is very hands-on and involves analyzing a bed's construction, feel and firmness. We make sure every bed gets multiple points of view from our entire team to ensure we're best representing different genders, body types and sleeper needs. Firmness and feel The Mattress Smasher tests the firm side of the Plank Firm mattress. Aly Lopez/CNET The first and arguably most important factor we look for when we test a bed is how it feels and how firm it is. These are some of the most subjective factors in mattress testing. They depend on your body weight or how much pressure you put on the bed. Through the years, we've found that our experience doesn't always match a brand's website. To test firmness, we have every lie on the bed in different positions, compiling the data to compare it to other beds we've tested. We note how it feels on our backs, and pressure points like the shoulders, hips and knees. Once we feel comfortable with our experience with the bed and have recorded our subjective firmness, we pass the bed off to the Mattress Smasher 9000. The MS9k is a proprietary machine built by the CNET Labs team. This gives us an objective numerical value for firmness across every bed we test. Motion isolation I often describe motion isolation as how well a bed dampens movement across the surface, aka, can you feel someone move around next to you? This is a huge factor that couples need to consider when choosing their next bed. To test motion isolation, I would lie on the bed and close my eyes while someone else moved around on the other side of the bed. Then, I'd rate how much I can feel their movement. Testing the motion isolation with a glass of water on the end and flopping around. It passed. Dillon Lopez/CNET Next, we perform the classic water glass test. It involves setting a glass of water on the edge of a bed and rolling toward and away from it. We note how much the water sloshes in the glass. Traditionally, memory foam tends to do the best in this area. Edge support Edge support refers to the strength of the bed's perimeter. This is important for people who sleep on the edge of the bed or have mobility issues that make it difficult to get in and out of bed. To test a bed's edge support, we lie on the edge and measure how much it compresses under our weight. It receives a low score if it feels like we might slide off. Hybrid beds with reinforced edges tend to do the best in this area. Temperature Temperature control is one of the most sought-after features in mattresses. Hot sleepers need cooling tech to ensure their body heat doesn't interrupt their sleep. Unfortunately, there is no threshold that mattresses must reach for a brand to slap a cooling label on a bed. In my experience, only a handful of beds are actually going to move the needle in this area. Most are just marketing. Part of the testing includes removing the mattress cover and analyzing its interior construction and materials. Dillon Lopez/CNET While testing a bed, we rank its cooling and note what cooling features are included in the construction, like a special cover or gel-infused foam layers. Some beds, like Purple, have an interesting construction that helps them sleep temperature-neutral, which is good for hot sleepers, but I don't consider it to be truly cooling. We also test beds in a temperature-controlled room to ensure we're always getting a consistent experience across beds.
Gizmodo
an hour ago
- Gizmodo
NASA's Next-Gen Rocket Booster Explodes in Test of a Design That May Never Fly
While the fate of NASA's Space Launch System (SLS) rocket hangs in the balance, the agency is pushing ahead with tests of new components needed to launch the vehicle toward the Moon. The latest test included the firing of a solid booster meant to replace NASA's shuttle-era rocket parts. Although the new booster started off strong, its nozzle appeared to get blown off around two minutes after it began firing its motor. On Thursday in Utah, Northrop Grumman conducted the first full-scale static fire test of the newly built solid rocket booster. NASA's Booster Obsolescence and Life Extension (BOLE) is the 'world's largest and most powerful segmented solid rocket motor,' according to Northrop Grumman. The test lasted for a little over two minutes, burning more than 1.4 million pounds of propellant. Toward the end, however, an unusually bright plume appeared to suddenly burn through parts of the booster, resulting in a large fireball and flying debris. In the video (shown below), the anomaly appears at the 22:15 mark. 'Today's test pushed the boundaries of large solid rocket motor design to meet rigorous performance requirements,' Jim Kalberer, vice president of propulsion systems at Northrop Grumman, said in a statement. 'While the motor appeared to perform well through the most harsh environments of the test, we observed an anomaly near the end of the two-plus minute burn.' The anomaly was likely caused by a faulty nozzle on the booster. 'The nozzle liberated energetically from the motor around 10 seconds before the burn ended, and there appeared to be some debris leaving the nozzle just before the main disintegration of the nozzle happened,' NASA Spaceflight reports. Northrop Grumman developed the new booster under a $3.2 billion contract with NASA. The booster features carbon-fiber composite cases, which are meant to be lighter and stronger than the shuttle-era steel cases currently on SLS. Instead of the SLS booster's current hydraulic thrust vector control steering system, BOLE uses an electronic system. It also uses a different propellant formula that's meant to increase performance by around 10% and adds another five metric tons of payload. NASA's massive, fully expendable Moon rocket is under heavy scrutiny. The 5.75-million-pound SLS was built using components from NASA's Space Shuttle program, which ran from 1981 to 2011. SLS is outfitted with four RS-25 engines originally built by Aerojet Rocketdyne for the shuttle project. NASA has a total of four contracts with Aerojet Rocketdyne for the RS-25 engines and Northrop Grumman for the boosters, which were also used during the Shuttle era, before the space agency switches to the newly designed BOLE. The new booster is intended for use on SLS beginning with Artemis 9, which is currently scheduled for 2034. SLS is a capable heavy-lift rocket, but it's ultimately unaffordable. The launch vehicle has already gone $6 billion over budget, with the projected cost of each SLS rocket being $144 million more than anticipated. That would increase the overall cost of a single Artemis launch to at least $4.2 billion, according to a report released in 2024 by the office of NASA's inspector general. In its budget proposal for 2026, the U.S. administration laid out a plan to phase out SLS and its Orion capsule, replacing them with commercial substitutes. To be clear, SLS is not officially dead, but it doesn't look good. Despite the uncertainty surrounding SLS, NASA carried out another test of the rocket's components last week. On June 20, the agency tested an RS-25 engine at the Fred Haise Test Stand at NASA's Stennis Space Center in Mississippi. This was the first hot fire test of the new RS-25 engines, and it lasted around eight and a half minutes or 'the same amount of time RS-25 engines fire during a launch of an SLS rocket on Artemis missions to the Moon,' according to NASA. NASA seems to be making progress with the new designs for its SLS rocket, but it's not clear whether these new parts will get to launch a mission to the Moon.
Associated Press
an hour ago
- Associated Press
Teachers Love Builders Space and Now There's More to Love
Bright Day Big Blocks Adds New Gears and Chutes to Popular Builders Space Kit 'Our teacher community always provides us with the best and brightest ideas'— David Krishock LOS ANGELES , CA, UNITED STATES, June 27, 2025 / / -- Bright Day Big Blocks majors in big blocks, big kid-size soft foam building blocks for children that inspire them to create, to express themselves in building anything they can imagine. Youngsters usually build the things they love to think about the most – be it dinosaurs or robots, cityscapes or space stations or medieval castles, vehicles like trains and planes, insects or monsters – anything. The early childhood education community, specifically teachers, have applauded Bright Day over the years for helping them build cognitive skills such as creativity, collaboration, critical thinking, and confidence in their children – as well as physical traits such as strength and stamina, coordination and dexterity, and more. Who knew when Bright Day invented their product called Builders Space ® it would also be so loved, and enthusiastically supported by the education community. Builders Space was inspired by what's come to be known as the Maker Movement in schools and play centers. The Maker Movement was invented in the early 2000's and really began gaining traction by 2013. The Maker Movement encourages hands-on learning, and creative problem solving through tinkering. Builders Space by Bright Day is a simple idea. The kit contains 21 flat panels that adhere to a wall, and sometimes the floor, each panel has holes, like a peg board. Made to be used with the panels are 300 smaller, hand size building blocks that enable children to build off of the wall, and up from the floor. Builders Space comes as a kit, the panels and blocks can create a builder or maker space about 5 feet tall and over 10 feet long. South Korea, long known for their progressive approach to educating their young children, has used the Builders Space extensively. Changsook Kim, head of the Greem School in Seoul has installed the biggest Builders Space wall and floor in the world. She says, 'why wouldn't we give the children a place, their space, where anything is creatively possible?' She continues, 'Builders Space is more than a place to play, it is a place to learn – where children can learn math, science, and through dreaming and storytelling build their vocabulary – it's a special, magical place'. Due to its success, new to Builders Space this coming school year are two add-ons kits, one called Gears and the other Chutes. The Chutes can be explained as blocks with channels that enable balls to run through them – the channel blocks hang on the building wall and children find a dozen ways to have fun, rolling the balls through the channels blocks - and maybe in the process learn about gravity and science. The Gear blocks employ a ratchet system and when installed on the wall by children they create a fun and fantastic configuration full of circular motion – and learn about energy and physics. David Krishock, a co-founder at Bright Day Big Blocks comments – 'we would love to claim genius on Builders Space, but the fact is that our teacher community always provides us with the best and brightest ideas'. He continues, 'children playing with gear and chute type products have been available and in use for decades – we just updated the idea a bit, married the idea up with our Builders Space - and voila! – more fun, more ways for young children to play and learn'. Builders Space is available at Bright Day Big Blocks now. And beginning July 1, 2025 new Gears and Chutes will be available and added to the USA and International product catalogs. Contact Bright Day Big Blocks and nonprofit Bright Day Foundation at [email protected] or 01-818-914-6541. About Bright Day Big Blocks BRIGHT DAY BIG BLOCKS is a fun, new and unique play system designed to stimulate creative play. Bright Day offers big, soft blocks and designs play space environments that peaks a child's curiosity, unlocks creativity, inspires collaboration, and builds confidence. Our big foam blocks enable play that builds cognitive, physical, emotional and social skills important to the development of all children. Bright Day can be found throughout the world in schools and play centers – on playgrounds, in libraries, children's hospitals, family resort hotels, airports, family restaurants, public parks, summer camps – anywhere and everywhere you find children playing. Bright Day Big Blocks are transforming children's lives through play. Laurel Tucker Bright Day Big Blocks and Bright Day Foundation +1 818-914-6541 email us here Visit us on social media: LinkedIn Instagram Facebook YouTube Legal Disclaimer: EIN Presswire provides this news content 'as is' without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.
