
Ricoh Announces Updated Version of My Favorite Travel Camera
I really liked the GR III and picked it as the best point-and-shoot camera for travel. The images it captured were better, especially in low light, than most of the other small cameras I tested. However, it felt quite dated. The new GR IV, on paper at least, seems to improve on many of the GR III's more aged aspects but keeps the vast majority of the camera the same. That's generally a good thing.
Big sensor, little camera
Ricoh
25.7-megapixel images (6,192x4,128)
18.3mm f/2.8 lens (28mm in 35mm equivalent)
1080p/60 video
5-axis image stabilization
Faster startup compared to previous GR cameras (claimed to be 0.6 seconds)
Built-in ND filter (2 stops)
53GB internal storage (also microSD)
Wi-Fi and Bluetooth 5.3
The two benefits of the GR III and its predecessors carry over to the GR IV: It's an extremely small camera with a big image sensor. The body is 4.3 by 2.4 by 1.3 inches, which is roughly the same width as a smartphone, thicker but shorter. It should fit easily in most pockets. The IV is very slightly smaller than the GR III.
Again, inside is a new APS-C-sized image sensor, though it's the same size used in the GR III and basically the same resolution. Ricoh says it has "higher sensitivity and reduced noise" compared to the sensor in the GR III. It would have been great to see a higher-resolution sensor, allowing for more detail when cropping in on an image, considering the GR IV has a fixed, wide-angle lens.
Ricoh
That lens is an all-new design, with an 18.3mm focal length (equivalent to 28mm). That matches the GR III, as does its f2.8 aperture. This is on the narrow end of what's typically considered a wide-angle lens, but it's similar to the field of view of the main cameras on most smartphones. Ricoh says the lens's glass elements allow for "edge-to-edge sharpness."
The GR IV has 5-axis shake reduction, up from 3-axis on the GR III, to help reduce blurriness during longer shutter speeds. Ricoh says this offers up to six stops of stabilization. This, along with the higher sensitivity of the image sensor, could mean the GR IV does really well in low light.
Ricoh
Along with the launch of the GR IV, Ricoh has announced several accessories, most notably a compact flash that connects via the hot shoe on top of the camera. After years of cameras trying to reduce the need for flashes, the resurgence of retro digital cameras and their aesthetic is bringing them back. Additionally, there will be some cosmetic alternatives, including a metal hot shoe cover, plus a wrist strap (pictured in the top image) and a lens adapter to fit the GW-4 wide conversion lens that's currently available for the GR III.
Should you wait for the GR IV?
Ricoh
On paper, the updates to the GR IV seem fairly mild. Same overall design, same resolution, same focal length. However, there's definitely an "if ain't broke, don't fix it" aspect to all of that. The GR III worked great, creating high-quality images in a pocket-size camera. It's often said the best camera is the one you have with you, and it was very easy to have the GR III with you.
The new lens, image sensor and stabilization could be solid upgrades. I won't know until I test the GR IV (likely next month when it launches). I'm a little disappointed it's not higher resolution. That's not a huge deal, but I've been using a fixed-lens camera for several months now as my main camera, and being able to crop in on the 40MP images has come in handy. Then again, if I were in a situation where I wanted to capture something in the distance, I'd usually just use the telephoto on my Pixel 9 Pro.
If you're interested in a GR camera, I'd recommend waiting a few weeks if you can. Either the GR IV will be a worthy upgrade and worth getting, or it will just be a minor improvement and the older, and likely cheaper, GR III will be the better option. The Ricoh GR IV will be available in mid-September for $1,500.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles

The Drive
2 minutes ago
- The Drive
Nissan Xterra and Pathfinder Are Coming Back as Body-on-Frame, Hybrid SUVs: Report
The latest car news, reviews, and features. When I think of the Nissan Xterra SUV, I think of it in bright yellow and jumping over dunes as I 'drove' it on 4×4 Evo for the Sega Dreamcast. I wasn't of driving age when the popular off-roader first came out, but according to a new report, I may have the chance to drive one after all in the not-so-distant future. According to Automotive News , the Japanese automaker shared the news of the Xterra and Pathfinder's return to Nissan's lineup at its national dealer meeting in Las Vegas on Wednesday. Per the outlet, the Xterra was described as a 'rugged, affordable midsize SUV' that'll go on sale in 2028. Nissan Americas Chairman Christian Meunier reportedly shared images of a design study performed by the automaker, teasing a boxy, adventure-ready SUV with an 'upright grille and squarish headlights.' According to the report, these sketches are tied to new, upcoming body-on-frame models like the Xterra, Pathfinder, and Infiniti QX60 SUVs, as well as the Frontier pickup truck. Nissan 'We are laser-focused on product [and] we are just getting started,' Meunier told attendees, according to AN . 'We have done a better job of planning, making sure the right cars are in the right place.' Specs for individual vehicles were not divulged, but the report claims that the upcoming Xterra is expected to feature a hybrid V6 engine with a range extender capable of 75 miles of electric-only driving. These vehicles are expected to be built at the automaker's Canton, Mississippi, factory, where the Frontier is currently built. The annual meeting, which featured new Nissan CEO Ivan Espinosa and was attended by 2,500 guests, also revealed other future plans by the automaker, including a Skyline-based Infiniti sedan with a manual transmission, an electrified Rogue crossover, and other updates across the Nissan and Infiniti lineup. After years of slumping sales and a failed merger with Honda, Nissan will be doing all it can to keep dealers and customers on its side, and hope that its new, revamped products can get her quickly enough to avoid more casualties. Got a tip? Email us at tips@
Yahoo
30 minutes ago
- Yahoo
Alibaba Spins Up Hong Kong IPO for Smart Car Offshoot Banma
This article first appeared on GuruFocus. Alibaba (BABA, Financials) is getting ready to send another one of its bets to the public markets. Warning! GuruFocus has detected 2 Warning Signs with BABA. Is BABA fairly valued? Test your thesis with our free DCF calculator. The company said Wednesday that Banma, a smart car tech firm it's nurtured since 2015, has filed to go public in Hong Kong. While there's no IPO date just yet and no guarantee it'll happen Alibaba said it plans to hang on to more than 30% of the company after the listing. Banma is all about making cars smarter inside. Think dashboards that respond like your phone does powered by AI. Based in Shanghai, the company builds smart cockpit systems, and its work recently caught the attention of BMW. In March, Alibaba announced it was deepening its partnership with the German automaker, tapping Banma to power new AI solutions for BMW's cars in China. This isn't just Alibaba's side hustle. Banma also counts SAIC Motor, SDIC Investment Management and Yunfeng Capital the fund co-founded by Jack Ma as backers. At one point, Alibaba described Banma as a full-on joint venture with SAIC. Why does this matter? It's another signal that Alibaba is serious about doubling down on automotive tech a sector where software is becoming just as important as the hardware. If Banma's IPO gets off the ground, it could help unlock value for shareholders while keeping Alibaba plugged into the car of the future. Investors will be watching closely for when the listing happens and what kind of growth story Banma pitches next.


CNET
32 minutes ago
- CNET
Vivo Launches Mixed Reality Headset, an Apple Vision Pro Competitor
Lookalikes of Apple products often pop up in China, and mixed reality headsets have now joined the party. Chinese smartphone maker Vivo has introduced the Vivo Vision, a headset mixing both AR and VR in mainland China, and it bears many similarities to the Apple Vision Pro. The Vivo Vision, currently only an in-store experience in China, has a curved glass visor, an aluminum external battery pack and downward-pointing cameras like the Vision Pro, but also some differences -- a 180-degree panoramic field of view and a much lighter weight, at 398 grams (vs. the Vision Pro's 650 grams). CNET asked Vivo if it plans to sell the Vivo Vision to non-China markets, but the company did not immediately respond. The Vivo Vision runs on OriginOS Vision, Vivo's mixed reality operating system, and supports 3D video recording, spatial photos and audio and a 120-inch cinematic screen experience. The starting cost in China will be $1,395 (converted to US dollars), compared to the Vision Pro's $3,500 cost. Even if we had the opportunity to buy the Vivo Vision in the US, it would matter little to Apple's current bottom line: the Vision Pro hasn't been a big seller, probably because of the price tag. But the company would be wise to create a cheaper version -- the market is expected to grow quickly over the next several years -- and apparently Apple is doing just that.