F-35s to get new capabilities with summer software update
Chauncey McIntosh, vice president and general manager of Lockheed's F-35 program, said at the Air and Space Forces Association's AFA Warfare Symposium here that the company plans to drop an update to the F-35′s Technology Refresh 3 software, which will enable new features.
The TR-3 software update will bring the aircraft type closer to being able to fly in combat, he said.
'Our warfighters are going to see a much higher increase of stability in that software' once the update is in place, McIntosh said.
TR-3 is a series of upgrades to the F-35′s computer memory, processing power, and displays, which are intended to make the jet more capable and pave the way for a subsequent series of more substantial improvements known as Block 4.
McIntosh said in a briefing with reporters Monday that Block 4 will bring the F-35 improved sensors, better sensor fusion, and an expanded array of weapons the fighter can carry.
In an interview with Defense News after the briefing, McIntosh declined to specify which Block 4 upgrades are on their way later this year, saying the details are secret.
'There are some things coming that the warfighter is going to be excited to receive,' he said.
A previous Block 4 capability that was dramatically accelerated in the F-35 was the adoption of the automatic ground collision avoidance system, or auto-GCAS. That life-saving technology automatically pulls a jet up if the pilot is unresponsive and the jet senses it is diving into the ground. Officials began installing the capability in 2019.
TR-3′s rollout was snarled by lingering software and hardware problems that caused the government to refuse deliveries of dozens of new F-35s for about a year. The delivery halt was lifted in July 2024, after Lockheed Martin developed an interim version of the TR-3 software that would allow pilots to fly training missions, and then combat training.
But the jets are still not able to fly in combat, and the government is withholding millions of dollars from Lockheed until the jets are certified to be combat capable. The F-35 Joint Program Office said earlier this year that it hopes the TR-3 jets will be combat capable by the end of 2025, but Lockheed's chief financial officer said in a January earnings call that it might slip to early 2026.
It remains unclear whether F-35s will reach full combat capability this year. McIntosh said it will be up to the military services and international partners flying the jets to decide whether they are ready for combat. He did not directly answer when asked whether Lockheed will be able to deliver all the elements needed for a combat-ready designation by the end of this year.
Lockheed expects to deliver between 170 and 190 F-35s this year, as it works through the backlog from the TR-3 delays. That would be up from the roughly 110 it delivered in 2024.
McIntosh told reporters Lockheed and the government expect to define the terms of the next F-35 contract, for Lot 18 of the jets, in the second quarter of 2025.
Although that contract has not yet been definitized, he said, the company is keeping the rising costs of the jet under inflation. He highlighted the price of steel as one example of a material that goes into an F-35 that has seen significant inflation in recent years.
When asked how the Trump administration's 25% tariffs on steel and aluminum might affect the F-35 program, McIntosh said Lockheed is monitoring their economic effects. He declined to speculate on how Lockheed might respond to tariff-driven increases in the supply chain, but said in the past the company has sought to find new ways to get cheaper materials, such as hunting for alternative vendors or adopting different buying techniques.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
USA Today
39 minutes ago
- USA Today
Mizuno adds Black Ion, Denim Copper finishes to JPX 925 Hot Metal, Pro wedges
Mizuno is offering JPX 925 Hot Metal irons and Pro T-1, T-3 wedges in fresh Black Ion and Denim Copper finishes starting Sept. 18. Gear: Mizuno JPX 925 Hot Metal irons (Black Ion), Mizuno Pro T-1 wedges (Denim Copper), Mizuno Pro T-3 wedges (Black Ion) Price: $165 per club (JPX 925 Hot Metal), $180 each (Pro T-1, Pro T-3) Specs: JPX 925 Hot Metal: Cast Nickel Chromoly 4335 cup-face, multi-thickness CORTECH design, tungsten weighting in 4–7 irons, topline rib structure. Pro T-1 and T-3 wedges: Grain Flow Forged 1025E mild carbon steel, Quad Cut + Hydroflow Micro Grooves, copper underlay, multiple grind options. Available: Sept. 18 Who it's for: Golfers who value proven Mizuno iron and wedge performance but prefer a different visual style. What you should know: Mizuno is adding new Black Ion and Denim Copper finishes to select irons and wedges, giving players more aesthetic choices without altering the feel, forgiveness, or performance of the original designs. The deep dive: Mizuno isn't in the habit of changing a winning formula, but the company knows that sometimes golfers want to put their own visual stamp on their gear. This fall, three of Mizuno's most in-demand models—the JPX 925 Hot Metal irons, the Mizuno Pro T-1 wedge, and the Mizuno Pro T-3 wedge—are getting fresh finish options designed to give players more aesthetic choices without altering the performance characteristics that made these clubs popular in the first place. When the JPX 925 Hot Metal irons debuted last summer, they brought together cast Nickel Chromoly 4335 cup face design with a variable-thickness CORTECH hitting area and strategic tungsten weighting in the 4–7 irons. The design delivered increased ball speeds, consistent gapping, and a higher launch, while topline ribs helped to improve sound and feel. Those traits remain unchanged in the new Black Ion version, but the darker finish reduces glare and adds a stealth-like appearance that fits well with the technology-driven profile. The Mizuno Pro T-1 wedge has been the company's flagship for precision shot-making since its January launch. Forged in Japan from 1025E mild carbon steel using Mizuno's Grain Flow Forged HD process, the T-1 features a copper underlay for added softness at impact and is available in six grind options to handle virtually any course condition. The new Denim Copper finish, available exclusively in the United States, nods to classic wedge styling while toning down glare at address. It creates a more traditional look that pairs well with the club's tour-inspired shaping. For golfers who prefer more forgiveness in their scoring clubs, the Pro T-3 wedge offers a shallow cavity back with a slightly longer head shape to improve stability on off-center strikes. Like the T-1, it features Mizuno's Quad Cut grooves and Hydroflow micro grooves, the same copper underlay, and is available in multiple sole grinds. Now finished in Black Ion, the T-3 gains a bolder, more modern appearance that can be especially appealing in bright light or on firm turf, where the darker surface offers a crisp contrast at setup. Whether it's the stealth of Black Ion or the warmth of Denim Copper, these new finish options let players tailor the look of their irons and wedges without sacrificing the feel, spin, control and forgiveness that define Mizuno's current lineup.
Business Insider
an hour ago
- Business Insider
Ford's AI cameras are catching hard-to-spot manufacturing errors. It could solve the company's costly recalls.
Every year, more than 300,000 F-150 pickups roll off the line at Ford's Dearborn Truck Plant. The vehicle — America's best-selling car — has a complex lineup of trim levels, electrical hardware, wiring harnesses, badges, fenders, and seat variations. As machines whir and workers assemble components with gloved hands, certain new members of the company's quality-assurance team never get distracted: AI-powered cameras. Ford has rolled out two in-house artificial intelligence systems, called AiTriz and MAIVS, to detect factory defects in real time. AiTriz, implemented in December 2024 and named after its Spain-based creator Beatriz Garcia Collado, uses machine learning and video streaming to catch millimeter-scale misalignments. MAIVS, which debuted in January 2024, relies on still images from smartphones mounted on 3D-printed stands that verify all of the correct parts are properly mounted on vehicles. Together, they're helping workers pinpoint issues on the spot — before problems turn into costly warranty claims, recalls, or rework. It's an area Ford is hoping to improve upon after leading the automotive industry in recalls in four of the past five years. "Imagine you're an operator, and you're getting a vehicle every minute. You have a number of different tasks you have to complete, and every vehicle is different," Jeff Tornabene, who manages vision applications at Ford's Manufacturing Technology and Development Center, told Business Insider. "When your control system knows the recipe, and your vision system can check it, there are some helpful suspenders there that make sure you're putting the right part on the right vehicle." AI could be Ford's fix for a costly recall problem These tools could relieve a billion-dollar headache for Ford. This year, the automaker faced a record 94 recalls, primarily affecting cars built before 2023. It's the most safety bulletins any major car brand has ever posted in an entire calendar year, and it's still early August. Chrysler has the second-highest number of recalls among major automakers, with 21. Those bulletins are costing Ford millions of dollars. For example, a fuel leak recall for 694,271 units of the popular Bronco Sport and Escape SUV models will cost $570 million, according to the Detroit Free Press. The company's AI-supported systems are already making a significant difference on the automaker's manufacturing floors, Patrick Frye, an engineering manager at the Dearborn plant, said. "It absolutely has helped from an operational standpoint," Frye told Business Insider. "Instead of having to wait for vehicles to hit end-of-line or certain checkpoints, it allows for better in-station process control." That kind of speed matters. Before systems like AiTriz, many electrical issues wouldn't surface until the final inspection, if at all, Frye said. Fixing those later often required ripping out carpets or removing seats. And as Ford vehicles gain more screens, sensors, and self-driving hardware, even a slightly loose connection can cause major headaches. For human workers, the tiny difference between a loose part and a good connection can be impossible to catch. "With our handwear to protect our hands, or the general factory noise, you don't always hear the click, or you can't always feel the snap of two connectors going together," Frye said. Brandon Tolsma, a vision engineer at Ford's MTDC, said AI's real-time results are often the difference between a fast fix and a carpet-ripping problem. "As the vehicle goes through the assembly line, it gets harder and harder to access some of these components," Tolsma said. "I can't stress enough how the real-time results are key in saving us time." The systems are now installed at dozens of stations across North America — AiTriz at 35 stations, and MAIVS at nearly 700. While MAIVS is limited to still images, AiTriz's live video feed offers more precision and adaptability, especially in cases of occlusion (like if a worker walks through a camera's frame or when a sheetmetal component blocks an electrical connection). Previously, some faulty connectors still passed final inspection, since they made basic electrical contact, Tolsma said. But if the plugs weren't fully seated, they could later jostle loose in real-world driving. Ford believes AI cameras are catching those millimeter-off subtleties that factory workers — even with extensive experience — might miss, even if it's hidden behind sheet metal and carpeting. "As the operators are trying to do their job quickly, it can be kind of hard to see, especially if they're some distance away from the electrical connector," Tolsma said. "But with vision, a high-powered camera can see that difference pretty clearly." The start of a smarter assembly line Analysts are cautiously optimistic. David Whiston, a Morningstar analyst who covers Ford, told BI that AI shows long-term promise, but it's still in its early stages. "I do think AI done effectively could reduce recalls over the next decade and beyond," he said. "But for now, there's no guarantee it'll work. Anything that's more preventative in not only manufacturing but in design and engineering should, in theory, reduce warranty and recall costs." For now, Tornabene says the vision tools are meant to assist the manufacturing workforce, not replace it. As models grow more complex, AI systems like AiTriz and MAIVS have the potential to support plant operators who are implementing more advanced sensors, computer chips, and processors to aid Ford's self-driving ambitions, Tornabene told BI. They're also helping to cut through factory noise, ensuring that each car is built as intended. "This isn't the endpoint for us," Tornabene said. "This is just the start of the plans that we have to make this technology a quality game-changer."
Yahoo
3 hours ago
- Yahoo
Nearly 1 in 4 Americans over 50 are delaying retirement over concerns about money — here's what's worrying them
More Americans are delaying retirement over fears about the economy and their own financial safety net. Nearly 1 in 4 (23%) pre-retirees over 50 polled in a survey commissioned by F&G Annuities & Life say they've decided to delay retirement — up from 14% a year ago — due to financial concerns. Of those who are postponing their retirement, 48% are worried they won't have enough money, 44% are worried about inflation and 34% are worried about a recession or plunging stock market. Don't miss Thanks to Jeff Bezos, you can now become a landlord for as little as $100 — and no, you don't have to deal with tenants or fix freezers. Here's how I'm 49 years old and have nothing saved for retirement — what should I do? Don't panic. Here are 6 of the easiest ways you can catch up (and fast) Robert Kiyosaki warns of a 'Greater Depression' coming to the US — with millions of Americans going poor. But he says these 2 'easy-money' assets will bring in 'great wealth'. How to get in now David John, a senior strategy policy advisor at AARP, told CBS he's seen people cut back on saving for retirement or pull money out of their savings to deal with unexpected costs or inflationary pressures. 'Of course, that helps in the short run, but that means that you have even more people who have worries once they start to get to retirement,' he said in a story published July 17. But whether or not these financial fears are justified, there are good reasons Americans might want to slow their roll toward retirement. Social Security The earliest age you can begin claiming Social Security retirement benefits is 62, but you can earn a bigger check each month if you wait up until age 70 to apply. So, if you're able to work a few extra years, or can survive off of your savings without Social Security for a while, you can end up with a larger monthly benefit for life. Plus, if you work those extra years, you may end up with more savings in the end. Catch-up contributions Once you reach age 50, you can contribute additional funds to tax-advantaged retirement plans, including 401(k) ($7,500) and IRA ($1,000) accounts. The longer you work into your 50s, the more you could potentially take advantage of these added contributions — called catch-up contributions. Stay in the know. Join 200,000+ readers and get the best of Moneywise sent straight to your inbox every week for free. Furthermore, thanks to the SECURE 2.0 Act, workers aged 60-63 may have a higher catch-up limit for their 401(k) plans. In 2025, the higher limit is $11,250 instead of $7,500. Take control of your finances Despite ongoing concerns about the economy, there are steps you can take to set yourself up for a strong future. Build a budget: If you haven't done so already, creating a budget can help you control your spending now, while setting you up for disciplined spending in retirement. Pay down debt: The longer you work, the better opportunity you have of shedding all debt and maximizing your savings by the time you retire. Emergency fund: Building an emergency fund can prevent you from falling further into debt in case of an unexpected expense. Experts recommend setting aside three-to-six months' worth of expenses in a high-interest savings account for this purpose. Get expert advice: Planning one's retirement can be a complicated process, and there's no shame in asking for help. A financial advisor can help you come up with a blueprint that best suits your needs and desires, including when to retire and apply for Social Security, as well as an appropriate withdrawal strategy. In the meantime: 'Save and continue to save,' John advised. 'Because any amount of retirement savings is going to be better than no retirement savings.' What to read next Want an extra $1,300,000 when you retire? Dave Ramsey says this 7-step plan 'works every single time' to kill debt, get rich in America — and that 'anyone' can do it Here are 5 simple ways to grow rich with real estate if you don't want to play landlord. And you can even start with as little as $10 Rich, young Americans are ditching the stormy stock market — here are the alternative assets they're banking on instead Here are 5 'must have' items that Americans (almost) always overpay for — and very quickly regret. How many are hurting you? This article provides information only and should not be construed as advice. It is provided without warranty of any kind. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
