Why Your LEDs Keep Dropping Dead, and Why Experts Say It's Not Normal
If you've run into the same issue, there's some good news. I asked manufacturers and lighting experts about it, and there are clear reasons why these bulbs sometimes die early. Heat is one of the biggest factors, and when conditions indoors get too warm, it can shorten the life of your LEDs.
Here's what I found out about why LED lights don't always last as long as the box claims, and what you can do to help them reach their full lifespan.
Don't miss any of CNET's unbiased tech content and lab-based reviews. Add us as a preferred Google source on Chrome.
Read more: Best Smart Lights
1. LED lifespan ratings are a broad average, not a promise
Not all LEDs last the same.The numbers you see on the box don't always work out in real life. LED bulbs do last longer but those claims about five to 10 years are estimates based on internal testing -- and companies are always looking for ways to show their bulbs in, well, the best possible light.
So if the packaging says the bulb lasts seven years, that means testing showed an average of seven years, and you don't always know the math applied to get that result. Thomas Grable, from the LEDvance product technical team, said that when LED bulb averages fall within a normal distribution chart, about 95% of the values fall within two standard deviations of the mean. That still means some LED lights will experience short lifetimes -- and as Grable points out, we're more likely to remember the lights that flicker and die right away than those that plod on.
Plus, companies may use sneakier language, like "up to seven years," which means they're probably doing serious weighting toward the very top performers in their bulb testing, making it more likely you'll see bulbs fall short.
And don't forget to check LED bulb details for how the manufacturer is defining a single day of use in these year calculations (if it says). Some companies use a more honest 6 to 8 hours of use for a single day. Others may use two to three hours of use to greatly inflate their lifespan numbers.
All that said, Grable reports that incandescent bulbs have an average of about 800 hours, far shorter than the average of most LED bulbs, so you should still be getting your money's worth unless something goes wrong. That's where other factors come in.
2. LED drivers overheat and fail
Temperature plays a key role in LED life.
Getty Images
The LED, or light-emitting diode, is very unlikely to fail, and if it does, it goes out slowly over years. Instead, it's the other electrical bits in LED bulbs that fail and cut off the bulb's light. LED bulbs use DC power, which requires a converter and drivers to switch from standard AC power in homes.
That means inside every LED bulb are tiny circuit components -- and their soldered contact points -- which are far more vulnerable than the diode itself. The Lighting Research Center of the Rensselaer Polytechnic Institute reports that research shows the delicate soldered points are most likely to fail in harsh conditions.
Heat, in particular, can cause these components to quickly break, so installing an LED bulb in a hot corner of your home or in a deep-set socket with poor ventilation can cause the lights to go out far sooner than expected.
You can help prevent these issues by looking for LED bulbs that have weighty aluminum heat-sink materials but ultimately LED bulbs won't perform the same in high heat conditions.
3. Your home electrical power may not be 'clean'
Chris Wedel/CNET
In electrical grid terms, clean power is steady and reliable, with very accurate alternating current and few unexpected spikes in amps. But not all electricity is like that. Depending on the electrical infrastructure near your home, your power may be on the dirtier side, with tiny spikes in power, and other problems.
LED bulb converters need to manage all those small discrepancies, which can quickly wear them down and cause them to overheat. If you seem to frequently lose bulbs around the home for no good reason, you could have a dirty power supply.
4. Sockets may be old or installation may be poor
An Ecosmart dimmable bulb against a wood surface.
Tyler Lacoma/CNET
Even if your electricity is clean, a bad installation could yield the same effects as dirty power. Old, dirty sockets won't transfer electricity as smoothly, creating burnout issues. And screwing in an LED bulb too loosely or too tightly can also create problems. Aim for a firm but gentle installation process in a clean socket for the best results.
5. Your home may have high humidity
High humidity is bad for electrical connections that bulbs use.
Olga Dobrovolska via Getty
Humidity teams up with heat to wear down LED electrical components even faster. If you live in a wet area with high moisture content in your indoor air, LED bulbs aren't as likely to last their full lifespan. Luckily, CNET has several dehumidifier recommendations to help dry out your home.
6. LED bulbs and old dimmers don't mix
LED bulbs might not work well with older dimmer switches.
Treatlife
Many LED bulbs can dim, but that doesn't mean they play well with older home dimmer switches. As LED installer Torchlight mentions, old dimmers are made to work with high-wattage incandescent bulbs. They don't really know what to do with low-wattage LEDs, which leads to burnout issues.
You can either install an LED dimmer switch or -- my preferred option -- choose a smart LED bulb with self-dimming features you can control via app rather than relying on old-fashioned dimmers.
7. Quality control issues can be a factor
LED bulb installation and manufacturing quality are key.
Getty Images
Finally, the manufacturing quality of LED bulbs will affect all the issues I've discussed above. Many manufacturers have serviceable diodes but try to save money on cheap drivers and converters (as well as sloppy assembly techniques), which is a major cause behind early failure.
When picking an LED bulb, it's best to stick with well-known, reliable brands, even if you have to pay a bit more. For smart bulbs, our testers have found some of the best results from Philips, Wiz, Govee, Nanoleaf and Cree.
To find the best LED bulbs for your home, visit our guides to the best LED bulb for every room in your house, what to consider when switching to LED bulbs, and the best LED floodlight bulbs we've tested.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CNET
38 minutes ago
- CNET
Google's Smart Home Devices Are Finally Getting Gemini's AI Skills
Gemini for Home will replace the Google Assistant in the company's line of smart displays and speakers, a step up in capabilities for its smart home devices, Google said Wednesday. Gemini for Home will use AI models tuned for home tasks and will work with any member of the household, including guests, the company said in a press release alongside its Made By Google event in New York. It'll work with the same "hey Google" activation phrase, but Gemini for Home can better understand context with the ability for users to ask more complex questions. Nest smart displays, speakers, thermostats and smart lights can interact with Gemini for Home. For example, users can have Gemini for Home dim lights and set the thermostat to 72 degrees in one command. Google's blog post also says commands like "turn off the lights everywhere except my bedroom" will also work. Now Playing: Everything Announced at Made by Google 2025 in 7 Minutes 06:58 Because Gemini for Home will tap into the power of large language models, a Nest Hub smart speaker can be prompted with what ingredients are in your fridge and will be able to process which recipes to consider. Gemini for Home also links to Google Search, meaning it can find and use up-to-date information. Gemini for Home could also create bespoke content, like a bedtime story. It's unclear now exactly which devices will support Gemini for Home. It's likely the current line of Nest devices will support it, but Google's blog post makes no mention of older Google smart speakers or the Pixel Tablet. Google didn't immediately respond to a request for comment. Google's AI push is spreading the company's generative technology across all of its devices and services. From Google Search, Gmail, Pixel phones and now smart home devices, Gemini is in everything. Unlike OpenAI, creators of ChatGPT, Google can spread its AI tech across a wide product portfolio. Google's early investments in AI means the company is ahead of Apple, which has been struggling to bake AI into its suite of devices. The rollout of Apple Intelligence on iPhone, which was made in partnership with OpenAI, has been slow by comparison to Google and other smartphone makers. The AI-ification of Google seems to be working. Google reported 14% increase in sales this past quarter, thanks to increased Google Search usage and higher cloud sales.
New York Times
an hour ago
- New York Times
Fujifilm's Pocketable New Camera Is Fun, Creative, and Way Too Expensive
It's incredibly portable. At 4.2 by 2.5 by 1.8 inches and just 8.5 ounces (including its battery and a memory card), the X Half is less than 0.25 inch larger than our favorite point-and-shoot camera, the Sony RX100 VII, in each dimension. But it's also more than 2 ounces lighter. When I wasn't using it, I mostly kept it on a piece of furniture near the entrance to my home so I'd remember to grab it whenever I went out. It fits fine in a sweatshirt pocket, and you'll barely notice it hanging on your shoulder if you use it with a traditional strap. It comes with a simple wrist strap, though I used the thin, lightweight Stroppa Flat Camera Neck Strap, which we recommend in our gift guide for photographers. In good lighting, its images look great. The X Half's 1-inch sensor is vertically oriented, so when you hold the camera naturally, you make vertical (or portrait) images. Fujifilm calls this camera the X Half because it's meant to evoke half-frame film cameras like the Pentax 17, which use half of a 35mm frame of film for each picture. In the same way, the X Half's sensor is about half the physical size of the APS-C sensors that Fujifilm uses in its mirrorless cameras and the point-and-shoot X100VI. Although the X100VI's images comprehensively outshine those from the X Half, this little camera nevertheless makes very nice 18-megapixel photos in good light. The image quality is nearly as good as that of the Sony RX100 VII, which uses the same-size sensor, despite that camera costing about twice as much. But the RX100 VII also gives you much more control, has a zoom lens and image stabilization, and is meant to handle a wider variety of photography than the X Half. The exposure compensation dial came in handy here to bump the exposure up by one-third of a stop to bring out extra detail in the shadowed areas. Phil Ryan/NYT Wirecutter The Acros+Red film simulation lent a classic look to this spraying fire hydrant on a very steamy morning in upper Manhattan. Phil Ryan/NYT Wirecutter The Velvia film simulation added much-needed pop to the color of this old, rusted fire call box. Phil Ryan/NYT Wirecutter At the camera's top sensitivity of ISO 12,800, colors look more bland, and a lot of detail is lost to noise reduction. Phil Ryan/NYT Wirecutter In good lighting and at ISO 250, the tiny words on the stickers are readable (if you zoom in). We chose to include the date, which the X Half put in the lower right-hand corner. Phil Ryan/NYT Wirecutter The exposure compensation dial came in handy here to bump the exposure up by one-third of a stop to bring out extra detail in the shadowed areas. Phil Ryan/NYT Wirecutter In bright light, the X Half's images are sharp and detailed. Capturing them is very much point and shoot: Just frame your subject up, time things just right, and you'll get the shot. No need to fuss with settings. In dim conditions, you can use the built-in LED flash, but you shouldn't expect it to work miracles. It can fill in shadows and make portraits more flattering when your subject is in the shade, but using it at night produces a harsher look (albeit one that evokes photos made with old film compact cameras). Its interface is simple and fun. The X Half has only two buttons: the shutter release and playback. In addition, it has a couple of control rings, a dial, a switch, a lever, and two touchscreens. The two screens work in tandem to navigate through menus. The smaller one selects submenus or lets you back out or cancel an action, while the larger shows options and lets you dig deeper or select a setting. While you're shooting, the smaller screen displays the film simulation or filter you've selected. A quick swipe up or down moves to a different one. The X Half doesn't provide as many film sims as you get with Fujifilm's fancier cameras, and you can't customize them, but all the fan favorites (like Classic Chrome, Acros, and Velvia) are there. You can choose from 13 in total. The X Half also has an array of 26 filters you can use to add effects like double exposures, random light leaks, or the look of expired film. We loved using them. The lever, found at the rear of the camera where your thumb sits, is an unexpected design touch. In film mode (more on this below), it advances to the next frame, and in normal shooting, it lets you join two images together as a diptych. It also sticks out a little when you turn the camera on, and pressing it inward brings up the last image you captured on the larger screen. From the front, the X Half has a very simple look — just try not to get too many fingerprints on the front of the finder, or they will mar your view. Phil Ryan/NYT Wirecutter Though there are few buttons on the back, this leaves plenty of room for your thumb to the right of the LCD screen. Phil Ryan/NYT Wirecutter When the camera is switched on, the lever extends so it's ready should you want to push it in to review the most recent photo or flick it to the right for a diptych or to advance the 'film' in film mode. Phil Ryan/NYT Wirecutter From the front, the X Half has a very simple look — just try not to get too many fingerprints on the front of the finder, or they will mar your view. Phil Ryan/NYT Wirecutter Like so much about the X Half, this touch helps keep you in the moment because it lets you check if you got the shot you wanted while preventing you from looking through other images you've recently made. You can use the playback button if you absolutely need to do that. Its autofocus is basic but effective. If you opt to use more than just the central AF area, you can only select from a grid of nine focus points. The live view on the main touchscreen is so small that it's tough to focus manually, even though the camera lets you try. Manual exposure is an option, but like manual focus, it feels out of step with the ethos behind this camera. We most enjoyed using the X Half in program mode, which is fully automatic when you use auto ISO, as we did. On occasion, we instead shot in aperture priority, where you select the aperture with the ring on the lens to control how much of your scene is in focus. Film mode keeps you focused on making images. The X Half includes a film mode, which mimics the experience of shooting film. It asks you to choose a film simulation, how many frames you want (36, 54, or 72), and an exposure mode — and that's what you have until you finish the 'roll.' Everything else is very locked down when you're shooting in film mode: You can only use the central autofocus point. The LCD live view is disabled, so you have to compose all shots using the optical viewfinder. You can't move on to the next shot until you flick the lever to 'advance' the roll. In film mode, the main LCD screen turns into a basic info display that shows how many shots are left, plus your battery level and a basic focus distance scale. Until you finish the roll and 'develop' it by sending it to the app on your phone, you can't review the images you've made. At first we found this jarring, but we quickly got used to it and kept our eyes and mind on the world around us, looking for the next photo to capture. If you turn the camera off mid-roll, it'll stay in film mode. However, you can finish your roll prematurely by removing the battery or memory card or by double-tapping the small touchscreen. The camera takes this decision seriously, making you confirm your choice twice before accepting your decision. Plus, the app reminds you that you stopped without finishing by including blank images in the contact sheet it generates. Images you capture in film mode are stored in a separate folder on the memory card, so you can also pop it in a card reader and view images that way, if you prefer. But where's the fun in that? Making diptychs is addictive. Diptychs (Fujifilm refers to them as 2-in-1s) aren't a regular part of my shooting process with most cameras, but being able to pair images instantly with the X Half has brought me an unexpected amount of joy. To make a diptych, you simply flick the lever in-between shots when you're not in film mode. You can choose whether you want the first image you capture to be on the left or the right, depending on how you want your shots to interact. A diptych can be used in many ways. In this case, it compares and contrasts opposing angles on these bicycles. Phil Ryan/NYT Wirecutter This time we used the image pair to show opposite sides of these apples at a farmers market. Phil Ryan/NYT Wirecutter You can also use diptychs to attempt humor by combining the narratives of two images. Phil Ryan/NYT Wirecutter Though perhaps a bit of a cerebral approach, combining very similar images can extend a pattern while also compelling the viewer to look more closely. Phil Ryan/NYT Wirecutter The optical viewfinder's inaccurate view makes it hard to be precise when composing. I tried to place the signpost on the edge of both images but clearly failed even after having used the camera for a couple of weeks. Phil Ryan/NYT Wirecutter A diptych can be used in many ways. In this case, it compares and contrasts opposing angles on these bicycles. Phil Ryan/NYT Wirecutter This is one place where the inaccurate finder might make you want to use the LCD for framing, so that you can better align the edges of the two images. Its battery life is impressive. The X Half's battery is rated for 510 shots, or 880 if you only use the optical finder. I never managed to drain the battery, even after a long day of shooting, but if you do, you can charge it on the go using a portable power bank via USB-C. The app works well. The X Half has its own app, and in testing it paired with the camera as easily as the best camera apps we've used. After you've paired it for the first time, you just need it to be in close proximity to the phone and tap connect at the top of the app screen to link up again. Transferring images and rolls is intuitive. The app shows a film strip as it ingests the images on a film mode 'roll,' which is pretty amusing to watch. It even has an amber hue evocative of unscanned film, and frames change to color (or black-and-white, if applicable) and brighten once they have been saved on the phone. When the X Half transfers a roll to your phone, it shows progress by changing the filmstrip in the app from a deep brownish-yellow — which evokes celluloid — to full-color images. Phil Ryan/NYT Wirecutter On the iPhone 14 Pro Max we used, it moved along at a decent clip, taking 2 minutes 7 seconds to download a roll of 36 images. Image transfer aside, the app is pretty basic. It lets you make diptychs from any photo you've added to the app, and it maintains separate galleries for single shots, diptychs, and each roll of film. We found it useful to check which film simulation we used for various images, as that info doesn't show up in your camera's photo roll. You can also use the app to update the camera's firmware.
CNET
2 hours ago
- CNET
Best Wearable Tech for Outdoor Athletes in 2025
Why we like it: I trained for and ran my first half-marathon with my Garmin Forerunner 165. It's my go-to smartwatch for all my activity, steps, naps, stress and recovery tracking. Its smartwatch features, such as viewing notifications, text messages, emails, music and calls, are just a bonus. I would run and wear this watch even if it didn't have those abilities. With this watch, I also easily track yoga, cardio, pilates and bike rides. When I run with my friends who wear other smartwatch brands, we have found that my Garmin's GPS is the most accurate. In addition to its simple design, the structure is impressively durable. I have hit this watch on almost every wall in my house, and it has no scratches. I also haven't had any issues with the silicone band. While I'm not a swimmer, I can swim with it to depths of up to 50 meters. Who it's best for: This Forerunner watch is for the runner who wants to improve. While training last summer, my in-depth stats helped me realize that my running cadence was lower than needed. I was taking too large of steps, and it was putting strain on my hips. Once I increased my cadence, I experienced less pain and was able to get faster. Even if you aren't interested in all kinds of running stats, it's great for the runner training a few times a week. The watch does a great job of suggesting workouts and monitoring your recovery between each. Who shouldn't get it: If you're a beginner runner or are just starting, I recommend a smaller, lighter, more affordable Garmin. While my second favorite Garmin watch, the Forerunner 45S, has been discontinued, the Forerunner 55 is a similar model and $50 less than the 165. – Caroline Igo, editor
