logo
Monday morning commute expected to be normal after weekend Mass Pike closure, MassDOT says

Monday morning commute expected to be normal after weekend Mass Pike closure, MassDOT says

CBS News2 days ago

Traffic should be normal for Monday morning commute following Mass Pike closure, MassDOT says
Traffic should be normal for Monday morning commute following Mass Pike closure, MassDOT says
Traffic should be normal for Monday morning commute following Mass Pike closure, MassDOT says
Officials with the Massachusetts Department of Transportation said traffic should be "normal" Monday morning after weekend closures on the Mass Pike caused lots of disruptions and frustration for drivers.
Construction on a new bridge has reduced traffic to one lane in both directions on a two-mile stretch of the Mass Pike on the Newton-Weston town line. All weekend long, traffic has been bumper to bumper in this area. It's all part of a massive bridge replacement project by the I-95 interchange.
To take a live look at the current delays, head to the Mass 511 map.
State Highway Administrator Jonathan Gulliver told WBZ-TV that the traffic will speed back up Monday morning when all the lanes are reopened.
"That commute tomorrow should be pretty good for you after 5 a.m., once the road is fully restored," said Gulliver. "I'd expect a little bit of residual traffic to clear through and then should be a normal Monday morning commute any time after 5:15, 5:30."
Gulliver advised commuters to delay the start of their day until after the roads reopen at 5 a.m.
A second weekend of closures is planned for Friday, June 20, at 9 p.m. until Monday, June 23, at 5 a.m.

Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Fix50 road work in Sacramento to take another year, Caltrans says
Fix50 road work in Sacramento to take another year, Caltrans says

CBS News

time2 hours ago

  • CBS News

Fix50 road work in Sacramento to take another year, Caltrans says

More traffic headaches are in store for drivers after Caltrans revealed that the Fix50 project's completion date has been pushed back for an entire year. The work was originally slated to be completed this summer. While being 85% done as of last May, Caltrans says the final expected completion date is now July 2026. Officials say equipment, weather, and crashes are the chief reasons for the delay. "Recently, for example, some structures for signs were needed to be installed, but they had to push back a couple of those signs because the crane that was needed was not available," said Sergio Ochoa Sanchez with Caltrans. New High Occupancy Vehicle lanes and pavement fixes from the Highway 50/Interstate 5 interchange to U.S. 50/Watt Avenue – a total of 14 miles of roadwork – are the project's primary objectives. Other major roadwork projects are also in various stages of completion around Sacramento area freeways, including the Interstate 80 pavement rehabilitation project and the Yolo 80 corridor improvement project.

Submit a question for Jay King's offseason Celtics mailbag
Submit a question for Jay King's offseason Celtics mailbag

New York Times

time2 hours ago

  • New York Times

Submit a question for Jay King's offseason Celtics mailbag

Austin Ainge just left the front office, Jayson Tatum is in the beginning stages of a long injury rehab process and a fascinating offseason is here. There are plenty of questions to ask about the Celtics' current predicament. So ask them. Drop your questions here and Jay King will answer them in an upcoming mailbag, touching on the disappointing end to Boston's season and the big decisions Brad Stevens will need to confront this summer. Read our complete Celtics coverage here. Jay King June 3, 2025 10:22 am EDT

Prevent Stubborn Water Spots on Your Dishes with These Fast Fixes
Prevent Stubborn Water Spots on Your Dishes with These Fast Fixes

Yahoo

time11 hours ago

  • Yahoo

Prevent Stubborn Water Spots on Your Dishes with These Fast Fixes

If you've ever unloaded your dishwasher only to find cloudy streaks and speckled spots on your supposedly clean glassware, you've suffered from water spots. Water spots are a common nuisance in many households. They dull the shine of glassware, leave film on plates, and make dishes look dirty—even when they're not. Fortunately, you can implement immediate and long-term strategies to eliminate these streaky marks for Schrader is the chief marketing officer at Cottage Care in Colorado. Murray Clark is the owner of Murray Clean in Massachusetts. own MaidThis Cleaning in Utah and are members of the Thumbtack Pro Advisory 6 Things You Should Be Doing to Help Your Dishwasher Clean Better Water spots are mineral deposits left behind when hard water evaporates. Hard water is rich in dissolved minerals, mainly calcium and magnesium. When dishes air-dry, especially in a dishwasher or on a drying rack, the water evaporates, and these minerals remain on the surface, forming those unsightly white or grayish specks. The severity of water spots varies depending on your local water hardness. In areas with especially hard water from the tap, a water filter may help. Older dishwashers that are not optimized for modern detergent and rinse aid formulations can also show streaks and stains. You can take easy actions to prevent or remove water spots. 'The best way to avoid water stains is to dry the dishes immediately after washing,' says Scott Schrader of Cottage Care in Colorado. He says towel drying or using a rinse aid in the dishwasher can keep water from sitting on surfaces long enough to evaporate and deposit minerals. This easy fix limits the amount of time moisture spends on dishware, reducing the opportunity for spotting. Hand-drying dishes right after they've been washed—whether by hand or machine—can make a visible difference. Murray Clark, owner of Murray Clean in Massachusetts, says to try paper towels or microfiber cloths to avoid spots. Microfiber cloths are particularly effective because they're highly absorbent and don't leave lint behind. They also have an electrostatic charge, which helps pull in any lingering dust or debris clinging to the dish surface. Another quick and highly effective fix? Rinse aid. Jen and Brian Boyle, owners of Maid This Cleaning and members of the Thumbtack Pro Advisory Board, explain that 'the rinse aid is released in the final cycle of the drying and allows water to run off the dishes, thus promoting better drying and less chance of water spots.' Many dishwashers come with a compartment for rinse aid, and using it regularly is one of the easiest ways to reduce spotting. Keep things natural with distilled white vinegar. Add a cup of vinegar to the bottom of your dishwasher before running a cycle to break down mineral buildup and leave dishes sparkling clean. For hand-washed dishes, use a diluted vinegar rinse as a final step. The acid in vinegar dissolves mineral deposits and provides a streak-free shine on glassware and plates. For spot treatment or periodic use, vinegar is a chemical-free cautious not to overuse vinegar in the dishwasher, as the acid can degrade certain rubber components, like gaskets and your dishes are still spotting despite using a rinse aid, it might be time to review your dishwasher settings. Selecting a longer drying cycle or a higher-temperature rinse can evaporate water more cleanly. Do not overload your dishwasher. When dishes are crammed tightly together, water cannot circulate effectively, leading to improper rinsing and more chances for water spotting. Ensure dishes have enough space between them and that larger items like pans or trays don't block the path of the spray arms. Don't underestimate the importance of keeping your dishwasher clean. Mineral buildup can clog spray arms, coat heating elements, and reduce the effectiveness of rinse cycles. Once a month, run an empty cycle with a cup of white vinegar or a dishwasher cleaner to flush out hard water deposits and grease. You should also check and clean the filter regularly, as trapped food particles can interfere with water flow and cleanliness. For households with persistently hard water, no amount of rinsing or towel drying can completely eliminate water spots. In these stubborn cases, the most effective solution is to install a water softener. Water softeners remove calcium and magnesium ions from your home's water supply and replace them with sodium or potassium ions. The result is 'soft' water that doesn't leave mineral residue behind. While the upfront expense can be costly, the long-term benefits go beyond dishware—soft water is also gentler on appliances, skin, clothing, and plumbing. Related: The Best Water Softeners of 2025, Tested by BHG Read the original article on Better Homes & Gardens

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into the world of global news and events? Download our app today from your preferred app store and start exploring.
app-storeplay-store