Westbound O'Connor on-ramp to Hwy. 417 closed for the summer as part of highway construction
Construction began in May to reconstruct the median and 'undertake operational improvements' to the Queensway from the O-Train bridges to Kent Street.
Starting July 2, the O'Connor Street on-ramp to the Queensway is closed until Aug. 29, with a detour in effect.
The eastbound lanes of Hwy. 417 will now be reduced to two through lanes between Bronson Avenue and Kent Street. Officials say the outside lane beyond Bronson Avenue must exit at Kent Street.
According to Kiewit Dufferin Midtown Partnership, three eastbound lanes will be maintained from Island Park Drive to Bronson Avenue and three westbound lanes will be maintained between Kent Street and Island Park Drive.
'Additional periodic lane closures will occur during off-peak daytime hours and overnight throughout the construction zone,' officials said.
Lane closures, median closures and traffic control staging will be in place in the eastbound and westbound lanes until Oct. 30 for construction.
'To facilitate the access to Highway 417 median construction including but not limited to removals of existing infrastructure, installation of new drainage, overhead signs, electrical infrastructure, and median barrier wall,' the company said in a statement.
Other construction work underway on Highway 417 includes improvements to the noise barrier and retaining wall replacements from Island Park Drive to Kent Street.
The westbound on-ramp at Parkdale Avenue and the westbound off-ramp at Island Park Drive along Highway 417 are also closed until October for construction related to concrete curbs, retaining walls, drainage, noise barriers and landscaping work.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
CTV News
10 hours ago
- CTV News
City approves $50K automated pilot project to curb noisy vehicles
The city has approved a new pilot project that wants to use cameras and microphones to crack down on the recurring issue of noisy vehicles. Edmonton city councillors voted in the $50,000 venture on Wednesday morning to address increasing noise complaints from citizens. It's not an untested solution, Ward papastew Coun. Michael Janz said, although it is an improved one. He brought forth the original motion. 'It's not the old billboard noise monitoring technology of the past,' he said. 'This is a new technology that works extremely precisely.' Currently, he explained, the city does manual enforcement of noise complaints from the road. By the time officers can get to it, he told CTV News Edmonton, the vehicle has disappeared 'miles away.' 'This is one of the issues I've heard the most about from Edmontonians across the city. This is not a Whyte Avenue problem. This is not a Whitemud Drive problem … everyone, wherever you are in Edmonton, is sick and tired of the noisy vehicles, the banging and the flaunting of the law,' Janz said. Janz specified that the technology being used is not about issuing tickets so much as providing the police data. He's also more confident in this project, he said, because the tech is already being used in other countries. Still, the idea is reminiscent of the 2020 project that aimed to accomplish the same thing. The city installed microphones in noise hot spots in a $200,000 project that was eventually written off for its flaws in automation. Challenged tickets would not hold up in court unless an officer had been present to corroborate the offence. For some, like Ward Dene Coun. Aaron Paquette, the current project is still a marker of 'irresponsible governance.' 'Look, the noise bothers me too … But I think there was time to take a breath, maybe pull it back for a week or so, just to work on it,' Paquette told CTV News Edmonton after the meeting. He fears the project doesn't have a proper budget and will be slow-acting. Currently, the technology isn't set to hit the streets until summer 2027. 'Should we actually be spending $50,000 on a technology that we do not know will work or not? Is that the best use of public funds, especially if there's no immediate outcome?' said Paquette. According to most who voiced their opinion on Wednesday though, like Mayor Amarjeet Sohi, the cost was worth the experiment if it meant finding a solution to law-breakers. Janz said the point of the approval is to get a 'proof of concept' that the technology can work in Canada, or specifically, Edmonton. He also said he's discussed it at length with the Edmonton Police Service (EPS). In an emailed comment, EPS said they await more details about the project. 'I think all of us realize that traffic enforcement is a major issue, and it's extremely expensive, extremely time-consuming, and anything we can do to make safer roads, more efficiently, more effectively, it's just a no-brainer,' Janz said. With files from CTV News Edmonton's Jeremy Thompson
CTV News
11 hours ago
- CTV News
Lanes added along Whoop-Up Drive
Calgary Watch The City of Lethbridge has added more lanes of westbound traffic on Whoop-Up Drive, to help increase the traffic flow and lessen delays.
CTV News
11 hours ago
- CTV News
Traffic flow increased along Whoop-Up Drive amid bridge repairs
Lethbridge police have charged a semi-truck driver for failing to navigate the height of the Whoop-Up Drive bridge, causing significant damage. The City of Lethbridge has added more lanes of westbound traffic on Whoop-Up Drive, to help increase the traffic flow and lessen delays. Starting Wednesday, the city says between 2 p.m. and 8 p.m. one eastbound lane will open to westbound traffic using the traffic diverters. It's similar to what was in place during the bridge rehabilitation project. The city says it will allow a higher volume of traffic to cross the bridge during the busy afternoon. Two-thirds of the Whoop-Up Drive bridge's girders were damaged after a semi-truck hauling a large piece of construction machinery hit it and got stuck earlier this month. The vehicle was driving to a construction site on the west side when it took a wrong turn into Indian Battle Park before striking the bridge and becoming stuck. It took several hours for crews and engineers to remove the semi-truck, with metal supports being installed to ensure the bridge's stability. The city says it is still waiting for the assessments to come back. 'We've stabilized the bridge—we've put in supports under the bridge to make sure it doesn't get any worse and then we're going to start doing restoration work shortly, once we have the contract in place to make those necessary repairs,' said Jason Drenth, City of Lethbridge acting director of infrastructure services. The city says one of the reasons bridge repairs aren't happening 24-7 is because the type of high-strength concrete being used needs time to cure, often taking days to properly harden. With files by Damien Wood, Karsen Marczuk
