Newly Inducted INS Tamal With 500 KM-Range BrahMos Challenges S-400, S-500, Iron Dome Systems
Amid growing concerns over maritime security, India is significantly ramping up its naval capabilities to counter increasing Chinese activity in the Indian Ocean. With Beijing expanding its presence under the pretext of research missions, India is investing heavily in frigates, warships, and aircraft carriers to strengthen the Indian Navy and safeguard its strategic interests.
On July 1, the INS Tamal, a stealth frigate of the Tushil class (Kirvak-III), was inducted into the Indian Navy with Russian cooperation. This addition significantly boosts India's naval power and maritime security. India and Russia have signed multi-billion-pound agreements for constructing aircraft carriers and warships.
With the commissioning of INS Tamal, India has received two of the four frigates, with the remaining two to be manufactured domestically. The deal, valued at approximately Rs 21,000 crore, was finalised in October 2016.
The INS Tamal boasts numerous advanced features, including an ultra-modern radar system and the Brahmos cruise missile. The missile's range has been extended from 290 km to 450-500 km, capable of carrying both conventional and nuclear warheads. Measuring approximately 125 metres long and weighing 3,900 tonnes, the frigate's stealth capability and sleek design are noteworthy.
Reports from the India Defence Research Wing indicate that the radar system on INS Tamal can detect air strikes and missile attacks promptly, enabling effective countermeasures. The frigate's ultra-modern weapon system ensures robust maritime defence and a strong retaliatory capability against adversaries.
INS Tamal is expected to be highly effective in the Indian Ocean and Indo-Pacific regions, which have become security hotspots due to China's aggressive policies. Additionally, INS Tamal will enhance surveillance against infiltration attempts from Pakistan through the Arabian Sea border near Kutch.
INS Tamal–BrahMos Duo Boosts India's Naval Strike Power
Before its induction, the Indian Navy tested INS Tamal's capabilities in the Andaman-Nicobar region, evaluating its mobility and weapon systems, especially the Brahmos cruise missile. The missile demonstrated remarkable performance, flying at an elevation so low—just 3 to 4 metres above the sea surface—that it evaded radar detection. This capability makes Brahmos a formidable asset, posing a significant challenge to enemy defences.
Radar systems operate by detecting radiation reflected from objects at a certain minimum altitude. However, the BrahMos cruise missile launched from INS Tamal struck its target while flying at an ultra-low altitude, effectively staying below radar detection. This achievement marks a significant breakthrough for India and poses a serious challenge for potential adversaries.
Even Advanced Systems Like S-500 or Iron Dome May Fail
The question arises whether air defence systems can intercept the Brahmos missile fired from INS Tamal. INS Tamal has been specifically designed for naval warfare, but it also carries missiles capable of striking land-based targets. This makes it a versatile platform for multi-role operations, including anti-air, anti-surface, and anti-submarine missions.
The recent test of the BrahMos missile from INS Tamal demonstrated its ability to fly at extremely low altitudes—just three to four metres above the surface. If this capability is maintained during actual anti-surface missions, it would be extremely difficult, if not impossible, for even the most advanced air defence systems like the S-400, S-500, or Iron Dome to detect and intercept it.
INS Tamal To Be Armed With Barak-8 Missiles
Barak-8 missiles can also be deployed on INS Tamal, significantly enhancing its air defence capabilities. Specifically designed to counter aerial threats, the Barak-8 can effectively intercept fighter jets, missiles, UAVs, and drones. With a strike range of 70 to 100 kilometres, this vertically launched missile system offers 360-degree coverage, making it a highly versatile weapon. Known for its precision in tracking and neutralising threats, the Barak-8 adds a formidable layer of defence.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Mint
39 minutes ago
- Mint
Australia shares end flat as bank profit-taking caps mining gains
ASX200 ends flat as banks offset miners' gains BHP soars 5.6%, best session in over 4 years CBA sheds over 2%, down 6% from record high GemLife jumps 4% on ASX debut NZ50 slips, snaps 5-day rally (Updates to market close) July 3 (Reuters) - Australian shares closed little changed on Thursday, hovering near record highs, as profit-taking in banks offset a rotation into underpriced mining stocks. The S&P/ASX 200 benchmark index finished at 8,595.80 points, 1.9 points below the previous day's all-time closing high. Investors scooped up mining stocks, reliant on exports to top iron ore consumer China, which have significantly underperformed the benchmark and the financials sector over the past year. The sub-index jumped over 3% on the day to hit a three-week high. BHP advanced 5.6% in its strongest session since January 2021, while Rio Tinto added 1.8%. "It's too early to say whether there's a lasting rotation underway between the ASX's two biggest sectors, but right now, we see far better value in miners than in banks," said Lochlan Halloway, equity market strategist at Morningstar. The sub-index has lost nearly 14% over the last two fiscal years. Financials were the biggest drag on the benchmark, shedding over 1% in their weakest session in a week. Commonwealth Bank of Australia dropped 2.2% on the day; now down more than 6% from last week's record high. A 50% rally over the past two fiscal years, driven largely by inflows into CBA, has left investors cautious and eyeing a potential trigger for correction in banks and rotation into lagging sectors. "After such a strong rally (in banks), it's understandable that some investors are choosing to lock in profits," Halloway said. Elsewhere, discretionary consumer stocks fell 1.1%, while energy stocks rose 0.8%. Retirement resorts operator GemLife Communities advanced 4.1% in its market debut after Australia's biggest IPO this year. In New Zealand, the benchmark S&P/NZX 50 index snapped a five-day winning streak to fall 0.6%, finishing at 12,704.48 points. (Reporting by Nikita Maria Jino in Bengaluru; Editing by Nivedita Bhattacharjee)
India Gazette
39 minutes ago
- India Gazette
India-UK FTA not only boost exports but also boost economy through higher remittances and domestic spending: Report
New Delhi [India], July 3 (ANI): The recently finalised free-trade agreement (FTA) between India and the United Kingdom (UK) will not only boost Indian exports and increase the mobility of Indian workers in the UK but also support India's economy through higher remittances and domestic spending noted a report by S&P Global Market Intelligence. In 2024, Indian workers abroad sent home around USD 130 billion, making up 3.3 per cent of the country's GDP. UK remains the third-largest source of these remittances, after the US and UAE. Under the new deal, Indian ICT workers posted in UK will benefit from a waiver on national insurance contributions for up to three years, allowing them to save more and potentially send more money back home. The FTA also promises to double trade in goods and services between India and the UK by 2030, up from USD 56.7 billion in 2024. Indian exports, especially textiles and apparel--which face challenges in the US market--are expected to benefit from improved access to the UK market. For the UK, the deal opens up greater access to India's fast-growing middle class, although immediate trade benefits will be seen in the beverage sector, with tariffs halved on 97 per cent of whisky and gin exports. However, the deal excludes pharmaceutical exports, limiting some of the economic benefits for Britain. There is also a lack of clarity on how UK car exports to India will operate under the new quota system. The agreement is part of India's larger push to secure trade pacts with key global partners. In 2025 and 2026, India aims to finalize similar deals with countries in the Gulf, Australia, Japan, Southeast Asia, and Latin America. These efforts are aimed at strengthening India's global trade network amid shifting international trade swift signing of the India-UK deal is a significant step for the UK as well, helping the country reshape its trade relationships after Brexit and reduce supply chain disruptions. Overall, the trade agreement is expected to strengthen economic ties between India and the UK, while also enhancing India's position in global trade. (ANI)
Fibre2Fashion
43 minutes ago
- Fibre2Fashion
US manufacturing PMI hits 3-year high on strong demand: S&P
US Manufacturing Purchasing Managers' Index (PMI) rose to 52.9 in June from 52 in May—its highest reading since May 2022, and marking the sixth straight month above the neutral 50 mark—signalling a solid expansion in manufacturing activity, according to S&P Global. Output increased for the first time since February, and to a solid degree, whilst new orders increased for a sixth successive month due to improved domestic and international demand. However, tariffs remained a prevalent theme, notably affecting purchasing decisions and prices. As per the data manufacturers raising their input buying activity to the greatest extent since April 2022, at times reflective of efforts to build up inventories given ongoing trade and price uncertainty, S&P Global said in a press release. US Manufacturing PMI rose to 52.9 in Juneâ€'it's highest since May 2022â€'signalling solid expansion, driven by rising output and new orders amid strong domestic and export demand. Firms ramped up input purchases, anticipating tariff-related price hikes, pushing inflation to a near three-year high. While employment and confidence improved, economists caution growth may slow due to inventory-led demand. Nonetheless, input costs still rose sharply, with inflation hitting its highest level for nearly three years. A similar trend was seen for output charges, which rose to the greatest degree since September 2022. Manufacturers recorded a first rise in production for four months. Growth was the second-steepest since March 2024, surpassed only by February's near three-year record. Firms often linked the rise in production to higher volumes of new orders at their plants, which rose in June as they have done throughout the year to date. Improved domestic demand was noted, with some success in securing new work linked to positive marketing campaigns. International sales also strengthened, with new export orders up modestly and for a second successive month, although growth was partly limited by tariffs. Tariffs also impacted purchasing and prices during June. Some manufacturers noted that tariff uncertainty had encouraged the building up of inventory and the purchasing of more inputs. The latter rose to the greatest degree in over three years and helped to drive a further monthly increase in stocks of input purchases. Pre-production inventory growth was marked, and the second-fastest in over three years, surpassed only by May's survey record increase. There was some notable upward pressure on input prices during June, with inflation accelerating to its highest in just under three years. Firms widely reported the inflationary impact of tariffs on prices, especially for metals like steel. In response, output charges were raised to the greatest degree since September 2022. US manufacturers are hopeful of a more stable economic environment in the year ahead. Trade uncertainty is expected to dissipate, whilst a generally stronger economy is anticipated to drive sales higher. Overall, confidence with regards to output in 12 months' time improved to its highest in four months. A relatively positive outlook also helped to underpin a rise in employment during June. Some pressure on capacity encouraged firms to add to their staffing numbers – backlogs of work increased for the first time since September 2022 during June. Overall, employment increased during June for a second successive month and at the fastest pace for over two-and-a-half years, added the release. 'June saw a welcome return to growth for US manufacturing production after three months of decline, with higher workloads driven by rising orders from both domestic and export customers. Reviving demand has also encouraged factories to take on additional staff at a rate not seen since September 2022,' said Chris Williamson, chief business economist at S&P Global Market Intelligence. 'However, at least some of this improvement has been driven by inventory building, as factories and their customers in retail and wholesale markets have sought to safeguard against tariff-related price rises and possible supply issues. It therefore seems likely that we will get pay-back in the form of slower growth as we head into the second half of the year.' 'These price pressures are already building, with factories reporting steep cost increases again in June, linked to tariffs, which they are passing through to customers. The big question of course is whether this merely results in a short-term change in the price level rather than a more worrying return of stubborn inflation,' added Williamson. 'More encouragingly, business confidence has continued to improve from the low point seen in April, with US manufacturers becoming more optimistic in the face of fewer trade and tariff worries compared to the heightened uncertainty seen in April, that said, many firms remain cautious as they await news of trade deals as the deadline for paused tariffs draws closer.' Fibre2Fashion News Desk (SG)
