Menai Suspension Bridge update on work planned in phase two of mammoth makeover
Phase one works to replace the bridge hangers began on September 4, 2023, and were completed in October 2024. Welsh Government then delayed the start of Phase two - with that work starting in March 2025, with a planned completion by the end of the year.
This was then put back to spring 2026 which means roadworks and traffic lights will remain in place for months longer, with just one lane open. It was a decision attacked by Plaid MS Rhun ap Iorwerth.
UK Highways A55 Ltd, and primary contractor Spencer Bridge Engineering, this week put out information about the work that is taking place.
They said the completion of this phase will help safeguard the Menai Suspension Bridge, a Grade I listed Georgian structure, for generations to come. This follows the success of Phase One which replaced 168 hangers using custom technology.
The latest phase of works includes essential maintenance to the bridge's corbels, land saddles, parapets and underdeck as part of a new work programme. Currently, all of the bridge's hangers are receiving new coats of paint and UK Highways A55 Ltd is finalising all the necessary certifications and approvals for each of the Phase Two elements.
This new work programme has been optimised using new data and experience from Phase One, particularly the challenging weather conditions of the Menai Strait.
The new project will see Spencer Bridge Engineering's teams carry out repair works on 15 of the bridge's corbels - concrete beams which support the footway on the approach spans. During Phase One the team were able to repair 45 of the 60 corbels using rope access, but the remaining 15 require intrusive works to be carried out on site.
The team will also carry out repair and painting of the parapets, which run along the entire length of the bridge, as well as the load checking and re-stressing of the land saddles, which anchor the cables of the bridge to the ground on the Anglesey side of the bridge.
The Spencer Bridge Engineering team will deploy its innovative new modular moving access system for the first time, during the underdeck painting stage of the project. Named AeroTruss, this is an innovative access system which has been developed and designed by Spencer Bridge Engineering's expert in-house team to address common issues associated with other temporary access systems currently available in the market.
They said the AeroTruss system will ensure the team can safely access the underdeck of the bridge, while minimising load effects into the bridge structure, due to its aerodynamic properties.
Luke Fisher, Spencer's Bridges Director, said: 'We are delighted to be continuing our successful partnership with UK Highways A55 Ltd to restore this iconic bridge and ensure it can remain in use for decades to come. This project is particularly exciting for us as it's the first time we are using our new AeroTruss system, which has been in development for over three years.
"With over 25 years' experience in the bridges sector, we've become familiar with some of the common issues faced while working on high-level structures, so we've developed AeroTruss to address these issues and ensure we can provide clients with the most efficient, high-quality service, while protecting the historic structures we're working on.'
As part of their commitment to deliver for Anglesey and north Wales, UK Highways A55 Ltd and Spencer Bridge Engineering said they continue to engage and appoint local contractors to support the work programmes where possible including all of the hanger painting technicians being recruited from the local area.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Scotsman
2 days ago
- Scotsman
Intercity greening: How Scottish firm Ember is creating zero emissions travel
Ember | Chris Watt Photography A Scottish business has created the only all-electric intercity coach service in the UK Sign up to our Scotsman Money newsletter, covering all you need to know to help manage your money. Sign up Thank you for signing up! Did you know with a Digital Subscription to The Scotsman, you can get unlimited access to the website including our premium content, as well as benefiting from fewer ads, loyalty rewards and much more. Learn More Sorry, there seem to be some issues. Please try again later. Submitting... The journey begins quietly, with no engine hum. The driver chats amiably to a passenger adjusting his reclining seat as the vehicle pulls away from a stop on Edinburgh's George Street. Welcome to the 9.21am coach service from the Scottish capital to Dundee, powered entirely by electric batteries. It's operated by Ember, a young business based in Scotland that has created the only all-electric intercity coach service in the UK. Advertisement Hide Ad Advertisement Hide Ad The Edinburgh-Dundee route was the first offered when Ember launched in 2020 offering zero emissions travel, round trip, on a single battery charge. Keith Bradbury | Chris Watt Photography Routes added since include Dundee to Glasgow, Aberdeen to Edinburgh, and Glasgow to Fort William, pitting Ember against established operators Scottish CityLink, Stagecoach, National Express and a recent entrant from Germany, FlixBus. For co-founders Keith Bradbury and Pierce Glennie – who swapped careers in fintech in London to start Ember – the idea was simple: decarbonise one of the most polluting sectors of transport while improving the often-miserable intercity coach travel experience. 'We'd been following electrification for some years and had seen what Tesla had done for cars,' explains Manchester-born Bradbury in the Georgian townhouse in Charlotte Square that serves as Ember's operational headquarters. The 43-year-old is dressed in Silicon Valley casual: T-shirt, slacks and baseball cap. Behind him, a table tennis table takes up half the room. Advertisement Hide Ad Advertisement Hide Ad The idea for Ember came after Glennie endured a 24-hour journey from Namibia to South Africa in a diesel-powered bus in 2018. 'He did a quick calculation to figure out how much you'd have saved if the bus had been electric,' explains Bradbury. 'The vision then was: can you build a business model around emission-free bus travel?' The pair secured a £490,000 loan from Triodos Bank under a UK government Covid loan support scheme, which helped acquire the first two coaches. A year later, Ember borrowed again from Triodos to part-fund expansion of the fleet to 24 coaches, and to set up a technology platform called EmberOS that provides real time data on the fleet while responding to passenger demand. In 2022, Ember bagged external investors including Pale Blue Dot, a Swedish venture capital firm, Gareth Williams, co-founder of travel search firm Skyscanner, Monzo founder Tom Blomfield, and Steven Meersman, co-founder of Zenobē, an electric vehicle battery storage business. Last year others followed, including Inven, a Czech venture capital fund. Ember's mission fits with the Scottish government's aim to decarbonise transport as set out in its National Transport Strategy, launched the same year as Ember. Since then, Holyrood has funded the acquisition of 800 zero emission buses, mostly through over £100m in subsidies to operators under the so-called Scottish Zero Emission Bus Challenge Fund (ScotZEB), one of the most ambitious such schemes in Europe. Advertisement Hide Ad Advertisement Hide Ad Ember's trajectory so far owes much to ScotZEB, whose subsidies have partially funded 136 of the 138 coaches the company will have in its fleet by next year, up from 78 currently. The source of those vehicles, Chinese manufacturer Yutong, has raised questions about how the design of Scotland's green transport subsidies can be reconciled with a perceived need to sustain domestic bus manufacturing. That was thrown into sharp relief in June when Canadian-owned Scottish bus manufacturer Alexander Dennis (ADL) said it might close its factory in Falkirk with the loss of 400 jobs. Pierce Gennie (L) and Keith Bradbury (R) | Chris Watt Photography In a second funding round last year, known as ScotZEB2, a consortium led by Zenobē was awarded funds for the purchase of about 250 vehicles and the installation of supporting infrastructure. By far the majority of buses ordered under the scheme (171) went to Yutong, with ADL a distant second (44). Critics of the scheme, including Laurie Macfarlane of think-tank Future Economy Scotland, argue that its evaluation criteria were weighted in favour of financial criteria, benefiting overseas manufacturers and resulting in jobs 'offshored abroad'. Advertisement Hide Ad Advertisement Hide Ad ADL has itself criticised Scottish government policy, warning a year ago of 'an uneven playing field' for domestic manufacturers. It said this was partly due to subsidy criteria that require adherence to advanced 'Fair Work First' standards of employee remuneration, welfare and safety, while overseas bus manufacturers face no such requirement. Transport Scotland counters that ADL has secured more orders for zero emission buses than any other manufacturer through ScotZEB and predecessor schemes. 'It is for bus operators to select their preferred manufacturer,' a spokesman says. This month, a further £40m was made available under ScotZEB2, possibly offering some hope for the survival of ADL's Falkirk factory. What is undisputed is how well Yutong is working for Ember – and not just on price. Bradbury explains that the Chinese company, which traces its origins to a bus repair factory founded in Zhengzhou in 1963, is happy to tweak design features on request. 'We are spending time with their engineers in China giving real time feedback and they're able to make changes quickly,' he says. One result is that Yutong recently swapped side mirrors for aerodynamically efficient camera mirrors. Advertisement Hide Ad Advertisement Hide Ad MeanwhiIe, improvements in battery technology by CATL, the Chinese company that supplies Yutong's batteries, mean that a battery can be charged in an hour compared with two and a half hours previously.
Wales Online
2 days ago
- Wales Online
Major changes proposed at busy Cardiff junction
Major changes proposed at busy Cardiff junction Cardiff Council has put its proposed changes, which includes the creation of a new lane of traffic, out for public consultation Cardiff Council is proposing major changes to Tyndall Street which is one of the most well-used routes into the city centre (Image: Google Street View ) Cardiff Council is proposing to make some changes near a major junction into the city centre. The council recently launched a consultation on its planned changes to a section of Tyndall Street by the Central Link roundabout. Changes to the road will involve the creation of an extra lane of traffic and the removal of a pedestrian crossing island to ultimately reduce congestion in the area. The consultation on planned work for Tyndall Street closes on Monday, August 25. Never miss a Cardiff story and sign up to our newsletter here. Looking at the plans in more detail the council said its goal is also to improve access to Schooner Way for residents and businesses and to counter 'some of the potential network impacts' caused by the construction of CrossRail phase 1A. If the current proposal goes ahead as planned the extra traffic lane in Tyndall Street will be a dedicated left-turn lane to Schooner Way. The pedestrian crossing island on the eastern arm of the Tyndall Street and Schooner Way junction would be removed but the pedestrian crossing itself will remain. Article continues below A pop-up cycleway on the road will also stay in its current location. Residential parking in the area will not be changed by the project. The council's hope for Tyndall Street is that it will eventually fit into the city's wider cycle network project as Cycleway Three. Cardiff Council's wider plan for active travel and transport from Tyndall Street to the River Taff (Image: Cardiff Council) Cardiff Council said on its website: 'Whilst the proposed changes will complement the pop-up cycleway we will also be looking at the wider route more holistically as part of the Cycleway Three project. 'This may come forward in the future subject to Welsh Government funding and further assessment.' There are plans for six cycleways across Cardiff and a number of phases have already been completed. However council officials told councillors at a scrutiny committee meeting in April 2025 there was still a long way to go before a fully joined-up network could be developed. Tens of millions of pounds have been invested in cycle schemes in Cardiff since 2018-19. Cardiff Council's website goes on to add that the local authority has a project to assess the possibility of building a bridge over the River Taff as part of the city's active travel network. Article continues below The council said: 'This is being progressed through design and planning. 'More information about other Cycleway Three projects will be available in due course.'
Powys County Times
3 days ago
- Powys County Times
New road safety scheme introduced on roads in Mid Wales
A new road safety scheme is targeting sharp bends to help protect motorcyclists in Mid Wales. The PRIME (Perceptual Rider Information for Maximising Expertise and Enjoyment) scheme uses innovative road markings and signage to support safer riding decisions on curved roads. The markings have now been introduced at four locations in North and Mid Wales, including Newtown. Ken Skates, cabinet secretary for transport and North Wales, said: "We are delighted to be trialling this new road safety initiative for the first time in Wales. "Evidence shows that motorcyclists are amongst the most vulnerable road users, especially on roads with sharp bends. "PRIME is an effective way to help reduce risks and support riders to make safer choices on the road, so it was the right thing to do." The trial follows a successful pilot in Scotland, where more than 32,000 motorcyclist journeys were studied across 22 sites. In Wales, PRIME markings have been installed at A487 Pantperthog in Gwynedd, A5 Coed Bwlch in Rhysgog near Llangollen, A483 north of Llanbadarn Fynydd, and A483 Glascoed Hall south of Newtown. The Welsh Government has partnered with the North and Mid Wales Trunk Road Agent (NMWTRA) to deliver the project. PRIME markings use visual cues to encourage safer rider behaviour, including lower speeds, improved road positioning, and better braking. The scheme is supported by North Wales Police and Dyfed Powys Police, who have focused on reducing motorcycle collisions. Dawn Fencott-Price, inspector of specialist operations at Dyfed-Powys Police, said: "We welcome the trial of this innovative initiative to improve motorcyclist safety on our roads. "This is a low-cost intervention which has been proven to significantly improve road safety for riders when used in the right road conditions. "One death on our roads is one too many – and reducing the number of motorcyclists who are killed or seriously injured on our roads is our priority."
