Porsche Classic Restoration Challenge Showcases Craftsmanship, Heritage in Fifth Year
Read the full story on Modern Car Collector
The fifth annual Porsche Classic Restoration Challenge is officially underway, highlighting the artistry and dedication behind restoring iconic Porsche models. The competition, launched in 2020, has since revived over 100 classic cars, bringing them back to life through expert craftsmanship and an extensive catalog of Porsche Classic Genuine Parts.
Open to Porsche dealerships across the United States, the event allows participating Porsche Centers to showcase their restoration skills in three categories: Preservation, Restoration, and Individualization. The challenge culminates in October, when regional winners will compete for the coveted National Championship title.
This year, fans will have a new way to track the progress of the competing restorations. Porsche Cars North America (PCNA) announced that each participating dealership will document their work on social media, using the hashtag #PorscheChallenge25, offering enthusiasts a behind-the-scenes look at the process.
The 2024 contest saw remarkable entries, with Gaudin Porsche of Las Vegas taking home top honors in the Preservation category for its 1986 911 Targa. Porsche Englewood claimed both the Individualization award and the Grand National Championship with its 1985 911 Carrera Coupe, a tribute build styled after the "1971 McQueen Gulf #20 S/T." Meanwhile, Porsche Louisville impressed judges in both the Restoration and People's Choice categories with its fully restored 1977 911 Turbo.
'This beloved contest presents a unique opportunity for our Porsche Centers to showcase their Classic abilities through their mechanical and creative skills,' said Jonathan Sieber, Senior Manager of Porsche Classic. 'We're excited to see what each team creates in 2025.'
Entries from PCNA's three sales regions—East, South-Central, and West—will be evaluated at public events throughout the summer, with Porsche Club of America experts and PCNA judges selecting winners. Spectators will also have a say, voting for the People's Choice Award.
The competition categories cater to different approaches to restoration:
Preservation: Focuses on maintaining originality while improving drivability, with minimal refinishing allowed. Vehicles must have been driven at least 2,500 miles per year or accumulated 70,000 miles since production.
Restoration: Requires a full factory-spec rebuild to near-original condition.
Individualization: Encourages creative modifications, following the Porsche Sonderwunsch philosophy, while ensuring the vehicle remains street legal and uses Porsche Genuine Parts.
As the world's largest market for classic Porsche vehicles, the U.S. plays a crucial role in preserving the brand's heritage. With Porsche-trained technicians utilizing a vast inventory of 85,000 Porsche Classic Genuine Parts, the Restoration Challenge continues to inspire a new generation of enthusiasts while honoring the marque's rich legacy.
Follow us on Facebook and Twitter
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
21 minutes ago
- Yahoo
Porsche Just Unveiled a New One-of-a-Kind Hypercar for the Road
Porsche won Le Mans in 1970 with its now-legendary 917, and a road-going version of which later emerged in 1975 known as the Count Rossi 917. On Friday, the marque unveiled a road-going version of the 963 Hypercar that will race at the 24 Hours of Le Mans next week, inspired by the Count Rossi 917 from decades ago. The 963 RSP, as it is called, was made in partnership with racing legend Roger Penske and Porsche Penske Motorsport, the team running at Le Mans next week. Roger Penske's initials, in fact, complete the name of the 963 RSP, which comes with a coat of exterior paint, unlike the competition 963s. Porsche said the act of painting the car itself was a bit of an ask, because of all the carbon fiber and Kevlar components. The color is called Martini Silver, like the Count Rossi 917; inside, there is tan leather and Alcantara, which is similar to the Count Rossi 917. More from Robb Report Knickers, Amish Vests, and Rare Buttons: Painter Jamie Wyeth on How His Art Influences His Personal Style These Personal Subs Can Now Be Rented by the Week Anyone? Anyone? Ferris Bueller's Famous Sweater Vest Is Up for Grabs This Summer Porsche took the 963 RSP out for a spin on roads outside of Le Mans, and that involved changing the specs from the competition cars as well, including lifting the car a little bit and changing the electronics that control the headlights and taillights. Porsche had to fully cover the wheels and install a horn as well. Even after that, Porsche still needed to get 'special permission' from the French to drive the car on French roads and get a license plate. Timo Bernhard, a former 24 Hours of Le Mans winner, drove the 963 RSP for its first miles. He said it was more comfortable to drive without having to wear layers of racing gear. 'Driving down a public road with a 917 beside me—it felt unreal,' Bernhard said in a statement. 'The car behaved perfectly—it felt a little friendlier and more forgiving than the normal 963—and felt super special and a lot more comfortable, especially as I was not needing all my safety gear.' The 963 RSP is powered by a hybrid V-8 setup, which Porsche says is the same as the race car powertrain but has been modified to accept fuel from standard gas pumps. The 4.6-liter engine makes 680 horsepower. As a one-off commissioned and created for Penske, Porsche did not reveal a price, though it's safe to say it cost more than a of Robb Report The 2024 Chevy C8 Corvette: Everything We Know About the Powerful Mid-Engine Beast The World's Best Superyacht Shipyards The ABCs of Chartering a Yacht Click here to read the full article.
Motor 1
an hour ago
- Motor 1
Why Carbon-Ceramic Brakes Are Expensive. And Why They Might Be Worth It
A couple of years ago, a Brembo engineer told me something that stuck: If you buy a car with carbon-ceramic brakes, you'll likely never need to replace the rotors. I'd heard the benefits of carbon-ceramic brakes talked up before, but this particularly bold claim seemed wild, an answer to the ultimate question: Are these fancy brakes worth their huge price tag? On the Cadillac CT5-V Blackwing, the carbon-ceramics are a $9,000 option; BMW charges $8,500; Porsche charges more than $9,000. Carbon-ceramic brakes are routinely among the priciest options for cars that already have a lot of big-ticket extras. Is there any world in which they're worth it? Welcome to The Rabbit Hole, a bi-weekly column where Senior Editor Chris Perkins explores his latest obsession with automotive technology. He speaks to the best in the business to understand how cars work and what the future of the automobile looks like. Photo by: Brembo Cast iron is a wonderful material for making brake discs. It's relatively cheap, easy to cast and machine into shape, and crucially, it has higher thermal conductivity than, say, steel. To perhaps state the obvious here, brakes convert a car's kinetic energy (forward motion) into heat via friction between the pad and rotor when the two come together. So a brake disc's thermal properties are of key importance. "[Cast-iron discs] have a better ability of absorbing the heat," explains Emanuele Bruletti, senior engineering manager for Brembo North America. "They can absorb it at a lower rate [than other common materials], and therefore, they can help in taking some of that away from the pads." It's the same reason cast iron makes for a great skillet, but if you cook with one, you know just how heavy it is. Weight is a car's enemy. So too is the increased demand on braking systems as cars evolve. This story was available to our newsletter subscribers before it hit the website. Want early access? Sign up below. back Sign up For more information, read our Privacy Policy and Terms of Use . "What has been driving the size increase in braking systems in the last few years is basically the performance envelope increasing," Bruletti explains. Cars are simply more powerful and heavier. Tires also play a role. Bruletti says that modern developments in tires have allowed for far greater deceleration rates, further increasing the demand on a braking system. That increased demand translates to more heat. Upping the size of your cast-iron rotor helps deal with all that heat better and improves the brake's ability to effectively slow a car. For obvious reasons, though, you can only make rotors so big, both for packaging and weight. Brake rotors are unsprung, which means their mass has a disproportionately high effect on ride and handling relative to a car's sprung masses. They're also rotating masses, which have a big effect on a vehicle's ability to accelerate, brake, and turn. "If you can shave weight off your car and more importantly, unsprung weight and evenly more importantly unsprung rotating weight, which is what a rotor is, [there are] huge gains to be had in performance," says James Walker Jr., a racer, engineer, and author on a book about braking systems. Chasing lightness, Dunlop developed the first carbon-fiber reinforced carbon brakes for the Concorde in the 1960s, and by the 1980s, these became common in Formula 1. However, these carbon-carbon brakes, still in use at the top levels of motorsport, are entirely unsuitable for road use, as they don't work well at cold temperatures. They're also extremely expensive and time-consuming to make, even now. A carbon-reinforced silicon-carbide matrix brings some of the weight-saving benefits of carbon-carbon brakes, but in a package that actually works at cold temperatures. And while still expensive and time-consuming to make, a carbon-ceramic brake disc is a lot easier and cheaper to manufacture than a carbon-carbon disc. We're talking a production time of around a couple days vs four months here. (That said, Brembo can make a cast-iron disc in about two hours.) Photo by: Porsche Photo by: Ferrari German company SGL Carbon introduced carbon-ceramic brakes in a road car, with the 2001 Porsche 911 GT2. Brembo's first carbon-ceramic brakes arrived a year later, with the Ferrari Enzo. In 2009, SGL and Brembo formed a joint venture for the development and manufacture of carbon-ceramic brakes, and today, it's one of, if not the largest, suppliers of brakes of this type. Bruletti says the carbon-ceramic matrix it uses has about a third the density of its cast iron. In terms of actual weight savings, you see all sorts of numbers thrown out. A good example is the brake discs in the previous-generation M3 and M4. In a technical document, BMW quotes a 30.6-pound weight for the car's standard front rotors and 17.1 pounds for the carbon-ceramics. So nearly half. The proportional weight savings for the carbon-ceramic rear rotors on the old M3 and M4 are similar, and that's despite the fact that BMW's carbon discs were slightly larger than their cast-iron counterparts. So great! But, we also need to talk about what carbon-ceramic brakes don't do. As Walker explains, a brake system is, essentially, a series of hydraulic levers that turn the relatively light force the driver applies to the brake pedal into a huge force at the road that slows the car down. In a road car, a 20 to 30 pound pedal input can translate to 1G of deceleration. This is called gain. Here, carbon-ceramic brakes don't have an advantage. "There's nothing that's done with a carbon-ceramic system compared to a cast-iron system that increases the mechanical output of the brake system," Walker explains. "So there's no real advantage to them in that space. The only reason people say, 'Oh, they feel better, they stop better,' is not because it's carbon ceramic, it's because [the automaker has] tuned that carbon-ceramic system to have a higher gain." Taking things a step further, Walker also points out that the braking system is only as good as the tire you have attached to it. Imagine you could have two identical cars, on the same model tires, the only difference being that one has cast-iron brakes, the other has a carbon-ceramic brake package. The brakes don't change the level of grip the tire is capable of. On the flipside, and to Bruletti's earlier point, the tire has a profound effect on the energy that goes into the braking system. Photo by: Ferrari As we've established, a carbon-ceramic disc is materially very different from a cast-iron disc. Carbon-ceramic has a much lower level of thermal conductivity than iron, but also far less mass and heat capacity. Which is a good and bad thing. Good because the brake disc can withstand the higher temperatures that today's faster/heavier/grippier vehicles generate in extreme braking events, courtesy of that ceramic chemistry. Brembo says carbon-ceramic discs can comfortably operate between 1,000 and 1,400 degrees Fahrenheit and can even withstand temperatures beyond 1,800 degrees. That's why carbon-ceramic brakes are frequently praised for their resistance to fade on track. But since the lighter and less-dense carbon-ceramic rotors gain and lose temperature quickly, that leads to huge thermal stresses on the rest of the braking components as they heat and cool in rapid succession. A cast-iron rotor better contains its heat, which keeps everything else cool. "You need to find a way of dissipating that heat away from the pads in some other way, and this is where it becomes very important to provide the necessary cooling at the brake system," Bruletti says. Photo by: Porsche Photo by: Porsche Beyond carefully designed cooling from both external components and internal rotor ducting, the fact that carbon-ceramic rotors aren't made from a homogenous material also has implications . The length, diameter, and orientation of the individual carbon fibers all have an effect on the material's thermal capacity. Adding additional layers and coatings also improves thermal capacity, which is why Brembo and SGL offer CCB brakes with additional ceramic friction layers on both sides, and CCW brakes, which use five carbon-ceramic layers. These options allow automakers to size down components, further saving weight, but their manufacturing processes are more time-consuming and thus, expensive. That's helpful because generally, carbon-ceramic rotors are larger than their cast-iron equivalents, in cars where both are optional. This is a direct result of the heat a carbon-ceramic rotor reflects into the pad during large braking events. 'In order to guarantee a stability of the friction material, you need to go larger with the pad,' Bruletti explains. And when you make the pad larger, you make the caliper larger, and the rotor larger. It's all cyclical. Yet, there's also a virtuous cycle here. Reducing unsprung, rotational mass means there's less weight to control. In theory, an automaker can use the weight reduction from carbon-ceramic brakes to employ smaller tires, lower spring and damper rates, smaller anti-roll bars, and so on. Photo by: McLaren All because of the outsize effect that a brake rotor's weight has on the rest of the car. That's a big part of why Ferrari and McLaren only use carbon-ceramic brakes, beyond the simple need for a brake system that can handle the huge stresses these fast cars generate. And now, we get to the original claim, the thing that started me down this path. Does a carbon-ceramic rotor last the life of the car? Yes. In some cases. 'The wear of the components really depends on usage, how you use them,' Bruletti says. 'If we assume that the usage, the cycles will be the same, yes, it is fair to say that in normal driving and non-track usage, just everyday driving, a carbon ceramic rotor will last in my opinion almost the entire life of your vehicle.' It's not just the guy from Brembo saying that too. Walker agrees that in normal street use, a carbon-ceramic rotor will last a very long time. Obviously you'll need to replace pads, but the rotors could have incredible longevity. But add track use into the mix, and the calculus becomes very different. With lots of heavy braking events, the carbon fibers in a carbon-ceramic rotor will eventually burn out. They'll lose thermal capacity. At road speeds, this won't happen much, if at all, but depending on what sort of car you drive on track, what sort of tracks you go to, and how you drive it, the carbon fibers can burn out very quickly. Photo by: BMW Let's say you're running your new, 5,300-pound BMW M5 at Road America, where you'll regularly blow past 150 mph on the track's long straights. Let's also say you're one of the last of the late brakers, pushing your brake zones as deep into the corner as you dare, hitting the pedal as hard as you can. If you've got carbon brakes on, you shouldn't expect those rotors to last very long at all. But say you've got a Porsche 911 GT3, which weighs in around 3,330 pounds, and you're at Lime Rock Park, which has only one heavy braking zone. And let's also say that you're a bit more measured. Rather than braking hard and late, you brake a little lighter, a little earlier. In that case, you can reasonably expect a more life out of your carbon-ceramic rotors. That difference, though, is why Porsche still offers cast-iron rotors on its GT cars, even the mighty GT3 RS. It knows that some customers will use up their brakes tracking their cars often, and in that instance, it makes sense to go for cast-iron discs, which are much cheaper to replace. Some other things to consider: With usage, a carbon-ceramic rotor doesn't lose thickness like a cast-iron rotor, but when those carbon fibers burn out, they do decrease in weight. This means a carbon-ceramic rotor won't develop cracks or warp like a cast-iron rotor would on track, so there's another point in favor. It's also why the hats on many carbon-ceramic rotors list a minimum weight. Once the rotor goes below that weight, it's time for a replacement. So, there isn't a simple answer to whether carbon-ceramic brakes are 'worth it.' But given what we all now know, their high upfront cost can be offset by rotor longevity, and the myriad other benefits the technology brings. It becomes a question of you, the customer. How are you going to use your car, and what do you value at the end of the day? More Deep Dives Brake Dust Is a Problem. Brembo Has a Solution Why BMW's B58 Is a True Successor to the Toyota 2JZ Share this Story Facebook X LinkedIn Flipboard Reddit WhatsApp E-Mail Got a tip for us? Email: tips@ Join the conversation ( )
Bloomberg
3 hours ago
- Bloomberg
Porsche Mulls Doing Some Final Assembly in US to Ease Tariff Hit
Porsche AG is considering shifting certain last parts of its model assembly to the US as a way to blunt the impact of Donald Trump's tariffs on imported vehicles, according to people familiar with the matter. The Volkswagen AG controlled sports-car maker could move steps of the final assembly process, such as the installation of interior components or the fitting of tires, to a US location from Germany, said the people familiar with Chief Executive Officer Oliver Blume's thinking. Porsche currently doesn't produce any cars in the US, leaving it highly exposed to the tariffs.
