Luck not with Flyers in NHL draft lottery; Michkov passed over for ROY
The 23rd-place New York Islanders earned the right to pick first overall in the June 27-28 draft by winning the first live draft lottery in league history on Monday. The 19th-place Utah Hockey Club won the other drawing and moved up the maximum allowed 10 spots to fourth place.
Advertisement
The Islanders had 3.5% odds of winning the No. 1 overall pick. They will select first for the first time since drafting John Tavares in 2009.
The Flyers, who had a 9.5% chance of getting the top pick and 9.5% of landing No. 2, ended up with the No. 6 pick as result of being leapfrogged by the odds-defying Islanders and Utah. The Flyers came in slotted at No. 4 and had a 15.4% chance of staying there. Their best odds (44.6%) were to end up picking fifth. The sixth slot was the worst possible scenario for the team.
The top-ranked North American prospect is Matthew Schaefer, though NHL Central Scouting said it's close. The Erie Otters defenseman missed the rest of the season after breaking his collarbone during the winter while playing for Team Canada at the world junior hockey championship. He had 22 points in 17 games.
Previously, the draw was conducted off camera, and deputy commissioner Bill Daly would turn over cards with team logos on them until the winner was revealed. But everyone got to watch the draw of the lottery balls live, and commissioner Gary Bettman was in the room, too.
NHL draft order after the lottery
No love for Matvei Michkov
One of the few bright spots for the Flyers this season was right wing Matvei Michkov, who was second among rookies with 63 points and led all freshmen with 26 goals. However, those numbers weren't enough to earn the 2023 seventh-overall pick a Calder Trophy finalist spot, awarded to rookie of the year.
Advertisement
The rookie announcement was anticipated because there were four strong candidates. Michkov didn't get enough votes from the Professional Hockey Writers Association to finish among the top three.
The Calder finalists are San Jose Sharks center Macklin Celebrini, Montreal Canadiens defenseman Lane Hutson and Calgary Flames goaltender Dustin Wolf
Voting took place at the end of the regular season. No date has been announced yet for when the winners will be revealed.
When is the NHL draft?
The 2025 NHL Draft will be held June 27-28. The first round will be on June 27 and rounds 2-7 will be held the next day. The times haven't been announced yet. It will be held in Los Angeles at L.A. Live's Peacock Theater. Top prospects will be there, but not team representatives, who will take part virtually.
This article originally appeared on USA TODAY: Luck not with Flyers in NHL draft lottery; Michkov passed over for ROY
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Business Wire
42 minutes ago
- Business Wire
ReposiTrak Adds 36 Food Manufacturers, Suppliers and Distributors for Traceability, Including the First North American Producer of Couscous
SALT LAKE CITY--(BUSINESS WIRE)--ReposiTrak (NYSE:TRAK), the world's largest food traceability and regulatory compliance network, leveraging its established inventory management and out-of-stock reduction SaaS platform, is proud to add 36 food manufacturers, suppliers and distributors to the queue of companies joining the ReposiTrak Traceability Network® (RTN). These companies will efficiently exchange intricate, FDA-required Key Data Elements (KDEs) for each Critical Tracking Event (CTE) in their supply chains, with the goal of meeting the growing traceability demands of their retail customers. 'Food manufacturers, suppliers and distributors need to act now to meet traceability demands of retailer and wholesaler customers, who require more data for more foods than the FDA, with swifter deadlines,' said ReposiTrak Chairman and CEO Randy Fields. The suppliers who are preparing for traceability include the first North American producer of couscous whose offering has expanded to include short-cut pasta, quinoa, rice and Mediterranean blends, as well as a salsa manufacturer transforming cut fruits and vegetables into salsa varieties like green chili, pineapple and peach, in addition to enchilada sauces. Finally, a leading Canadian importer of foodservice products is joining, proving products such as feta, condiments and sauces, cut avocado and soy-based cheeses to restaurants. 'It's the industry – not the FDA – that's driving food traceability today,' said ReposiTrak Chairman and CEO Randy Fields. 'Food manufacturers, suppliers and distributors need to act now to meet the traceability demands of their retailer and wholesaler customers, who require more data for more foods than the FDA, with swifter deadlines.' The ReposiTrak Traceability Network requires no additional hardware. Every traceability data file is checked using a 500+ point error detection process and ReposiTrak's U.S.-based team works with food manufacturers and suppliers to make corrections, so that the data is as complete and accurate as possible before it reaches their retail, wholesale or foodservice customers. About ReposiTrak ReposiTrak (NYSE: TRAK) provides retailers, suppliers, food manufacturers and wholesalers with a robust solution suite to help reduce risk and remain in compliance with regulatory requirements, enhance operational controls and increase sales with unrivaled brand protection. Consisting of three product families – food traceability, compliance and risk management and supply chain solutions – ReposiTrak's integrated, cloud-based applications are supported by an unparalleled team of experts. For more information, please visit
Business Wire
42 minutes ago
- Business Wire
Thunderstruck Ag Wins Dual Honors at Ag in Motion 2025 for Razors Edge Concaves
LOS ANGELES--(BUSINESS WIRE)-- Thunderstruck Ag has been recognized with both the 2025 Innovation Award and the Farmers' Choice Award at Ag in Motion, solidifying its Razors Edge Concaves as one of the most transformative and farmer-approved solutions in modern harvesting. These top honors reflect Thunderstruck Ag's commitment to solving real-world challenges in the field, starting with the costly inefficiencies tied to outdated concave systems. With its multi-crop adaptability, precision threshing, and downtime-reducing design, the Razors Edge Concaves are changing how North American farmers approach harvest. 'This is more than a product win, it's a validation that we're listening to farmers and building what they actually need,' said Jeremy Matuszewski, President and Founder of Thunderstruck Ag. 'Razors Edge Concaves simplifies the process, improves the results, and takes the headache out of harvest season.' Award-Winning Simplicity Meets Serious Performance Razors Edge Concaves stood out among top agricultural innovations for their field-proven results and farmer-focused engineering. One Setup, All Season The patent-pending variable bar spacing matches natural crop flow, eliminating mid-season hardware swaps. Switch between wheat, soybeans, corn, or canola without cover plates or inserts. Cleaner Threshing, Better Grain The notched bar system promotes grain-on-grain separation, maintaining kernel integrity and delivering a cleaner sample, even in tough conditions. More Acres, Less Wear The laser-clad edge holds its sharpness longer, extending component life and reducing maintenance. Designed for the Challenges Farmers Actually Face From managing multiple crops to avoiding rotor loss and overload, pRazors Edge Concaves offer a smarter alternative to traditional concave systems. The design eliminates unnecessary adjustments, minimizes crop loss, and maximizes efficiency, translating directly into higher returns at the elevator and less stress in the field. 'This isn't just innovation for the sake of it, it's equipment built to work better, faster, and longer,' Matuszewski added. About Thunderstruck Ag Equipment Thunderstruck Ag Equipment is dedicated to connecting farmers with products that make them more successful on their farms. They are committed to solving real-world farming challenges through innovative, field-tested equipment. With a focus on efficiency, durability, and practicality, the company is redefining what it means to work smarter in modern agriculture. For more information, visit or contact sales@
New York Times
43 minutes ago
- New York Times
A hockey mom's quest to make ‘the best neck guard' — and get players to wear it
In 2024-25, a total of 396,525 youth players were registered with USA Hockey. All of them, effective Aug. 1, 2024, were required to wear neck protection during games and practices following a new USA Hockey rule covering all age classifications except adults. All players entering the NHL in 2026-27 and beyond must wear neck guards as part of the new collective bargaining agreement between the league and NHLPA. Neck protection was already mandatory for professional players in England, Finland, Germany and Sweden. In Canada, neck guards are required in minor hockey, CHL and women's hockey. Advertisement These rules satisfy Teri Weiss personally and professionally. She is the mother of Boston Bruins defenseman Mason Lohrei. Her son's safety was the reason Weiss founded Skate Armor, a Wisconsin-based company that designs and manufactures neck guards. As of July, Weiss projected she would sell approximately 12,000 units in 2025-26. No current NHLers use her neck guards. As for her son, Lohrei started the 2025 World Championship in Sweden and Denmark wearing a Team USA-issued neck guard. All players must use neck protection during IIHF competition. Weiss shipped a Skate Armor neck guard overseas for Lohrei to wear during the tournament. It arrived as Lohrei became a healthy scratch. It stayed in his bag. Lohrei does not use a neck guard during NHL play. 'I just hate wearing a neck guard in general. Wasn't a fan of it,' said Lohrei, who appeared in five of Team USA's 10 games. 'That being said, I didn't play a ton of the games over there. Didn't have to wear one up in the stands.' Weiss ceded that her 24-year-old son has aged out of parental reach. So she worries. On Feb. 3, 2024, while playing for the AHL's Providence Bruins, Lohrei suffered a skate cut on his knee. Weiss immediately knew what had happened by the manner in which he went down. Lohrei did not play again for 13 days. 'You want to make this choice,' Weiss said of players like her son who decline to wear neck protection. 'But if you care about the people that love you, that have gotten you to this game, that have spent time and effort and money, then you're going to go out and skate without a neck guard on? Something that, yes, is rare. But if it does happen, it can kill you. So why? If you have a mom, a dad, a brother, a sister, a wife, children, why aren't you wearing a neck guard? 'Do I want to throttle him about it? Absolutely.' Advertisement Weiss believes in her neck guard. It has yet to catch on. Even her son will not wear it. One day, Lohrei returned from the rink with a bruise on the side of his neck. Lohrei, then nine years old by Weiss' recollection, had taken a stick up high. The neck guard Weiss had bought was in Lohrei's bag. He did not like wearing it. Binding on the seams irritated his skin. Upholstery foam inside the neck guard retained Lohrei's sweat, making it heavier. Weiss had no trouble cutting the neck guard open. 'I took my kitchen knife I use to cut chicken with,' Weiss recalled. 'Literally the first pass, I sliced right through it.' Weiss entered her family room where Lohrei was watching TV. She poked her thumbs through the gash she had opened and showed the neck guard to her son. 'Mom,' Lohrei said. 'If you make me something, I'll wear it.' Weiss dug in. She settled on SpectraGuard, a polyethylene Honeywell product used in cut-resistant gloves in the food processing industry. As for design, Weiss devised tabs that cover the sides of the neck up to the ear lobes. The tabs include rubber that prevents them from rolling down. Weiss believed this protected more of the neck than collar-style guards, which, depending on their height, can expose the area under the ears. The carotid arteries, which supply blood to the brain, travel through each side of the neck to the base of the skull. The jugular veins, which transport blood from the brain to the heart, run along the spine and on the front of the neck. In 2015, a Mayo Clinic study tested 14 brands of neck guards to determine skate cut resistance. The Skate Armor neck guard and one of three models of the Reebok 11K neck guard did not fail under a compression load of 600 Newtons. The test defined failure as damage to polyethylene foam positioned between a neck guard and a neck form. Advertisement 'I think I designed the best neck guard on the market right now as far as coverage and cut resistance,' Weiss said. 'Because if I didn't, I wouldn't be doing it.' When Weiss was first bringing her creation to market, wearing a neck guard was recommended but not mandatory. A recommendation became a requirement during the USA Hockey Congress winter meeting on Jan. 28, 2024. It was not a coincidence the change occurred three months after former NHLer Adam Johnson died because of a skate cut to his neck. 'It's a very rare occurrence,' said Kevin Margarucci, USA Hockey manager of player safety. 'But when something like that happens, it opens your eyes a little bit more. That definitely was one of the events leading up to our requirement that increased our conversations in looking into this a little bit further and ultimately leading us to the requirement.' In theory, the rule change should have helped Skate Armor land on more players' necks. In practice, that has not necessarily been the case. At Pure Hockey in Needham, Mass., there are five neck guards available for purchase: CCM NG900, CCM NG600, Shock Doctor Ultra 2.0, Bauer NLP21 and Aegis Interceptor. All are made in Vietnam. Each of the neck guards is certified by the Bureau de Normalisation du Quebec (BNQ), confirmed by a BNQ label. This means the neck guards have been tested to meet BNQ's safety standards. Similarly, the Hockey Equipment Certification Council (HECC) certifies helmets, goalie masks, face masks, visors and neck guards. Manufacturers contact HECC to express interest in certification. HECC then connects manufacturers with the CSA Group, a Toronto-based corporation that conducts testing on a range of products, including home appliances and personal protective equipment. USA Hockey's guidance for HECC was to measure neck guards' cut resistance and coverage area. Advertisement 'If you have a product that's really stiff but covers a lot of neck, kids are going to try to not wear it as tight, roll it down or whatever. Now they're not wearing it properly,' said Margarucci. 'Equipment can only protect what it's covering.' The objective of HECC certification is to help consumers determine which products have passed safety tests. But the marketplace can be confusing. Terry Smith, chair of the HECC certification committee, noted how Amazon's ease of purchase and delivery could convince families to order non-certified helmets that may not have undergone safety testing. Ryan Miosek, HECC general counsel, said counterfeit labels are regularly placed on products that are not HECC-certified. 'It's a complicated process. But it's complicated because it's important for the consumer and for the marketplace,' Miosek said. 'We don't, at HECC, just hand out certification labels just because you want it. You have to earn it. Our manufacturers that have that label on their helmet, they've earned it. They've earned the right to carry that certification on their product to let the market know that this meets a standard.' As of Aug. 1, 2025, USA Hockey mandated that all neck guards must be HECC-certified. BNQ-certified neck guards will meet this criteria for the 2025-26 and 2026-27 seasons, according to Margarucci, giving manufacturers time to pursue HECC certification. 'It's just part of your gear you put on now,' Margarucci said. 'Over time, it's going to be seamless.' The rule puts Skate Armor on the clock. Weiss previously had BNQ certification. The BNQ logo — it looks like a ladle inside a square with rounded corners — is affixed on Skate Armor's current inventory. According to Weiss, BNQ certification costs $25,000 Canadian the first year and $13,000 every other year following. Advertisement Weiss chose to let her BNQ certification lapse, partly because of the upcoming HECC requirement. She is also testing newer fabrics that, among other qualities, have cooling features and does not want to pursue HECC certification before a design change. On March 19, Weiss received a $10,245.56 quote from CSA for HECC certification. Weiss would also have to carry $5 million in insurance annually. She estimated policy costs to range between $12,000 and $25,000 per year. As a small business owner, Weiss considers these costs significant. She does not have a choice because of USA Hockey's HECC requirement. 'That is the bottom line,' Weiss said. 'You're going to have to have HECC.' The way Weiss remembers it, she was driving from her home in Wisconsin to Michigan when she got the call. Weiss was en route to watch daughter Zoe Lohrei, a former player at Adrian College, play a game. Caller ID showed Grand Rapids, Minn. Weiss thought it was a customer when she answered. 'Hi Teri, this is Sue Johnson,' the caller said. 'Hi Sue,' Weiss responded. 'How can I help you?' 'I'm Adam Johnson's mom,' the caller replied. Weiss was stunned. They had never been in contact. Johnson told Weiss stories about her son. He had been planning to propose to his girlfriend. He was thinking about retiring from hockey, buying a farm and starting a career in finance. Johnson then told Weiss she liked what she saw on the Skate Armor web site. That call helped validate Weiss' work. They have since become friends. Skate Armor donates $1 from every neck guard sold to the Adam Johnson Memorial Fund. Weiss has spoken to larger manufacturers about licensing to broaden Skate Armor's footprint. No deals have been made. She has been told that margins on neck guards are thin. Other manufacturers offer a portfolio of products, from sticks to skates to protective equipment. They also produce neck guards at greater scale and lower costs. Skate Armor has three neck-specific items: the neck guard, a neck guard shirt and an impact insert. Advertisement Overseas production could save Weiss money. She does not want to risk compromising the manufacturing process. The materials for the neck guard are laser-cut in Wisconsin. Manufacturing takes place at Brownmed in Spirit Lake, Iowa. So Weiss makes Skate Armor neck guards available for purchase online and in three retail locations in Littleton, Colo.; Appleton, Wis.; and Fargo, N.D. Skate Armor is profitable, according to Weiss. 'There's nothing like when I have a parent call me and tell me a story about it saving their kid,' Weiss said. 'I'm like, 'Well, my job is done.' I didn't do it thinking I'm going to sell millions of these and make all kinds of money. I did it because I saw that change still needs to happen so this part of a hockey player's body is covered and we do our very best to prohibit this thing from ever happening again.' (Top photo of Teri Weiss and Mason Lohrei during his days at Culver Military Academy: Courtesy of Teri Weiss) Spot the pattern. Connect the terms Find the hidden link between sports terms Play today's puzzle
