Samsung Galaxy S25 Edge: The Ultimate Drop Test
The Samsung Galaxy S25 Edge stands out as the company's thinnest and lightest smartphone to date, combining sleek design with advanced engineering. To evaluate its durability, the device underwent a series of rigorous drop tests in a new video from PBKreviews, designed to simulate real-world scenarios. These tests aimed to assess how well the phone's materials and construction could withstand accidental impacts. Despite sustaining visible damage in some cases, the Galaxy S25 Edge maintained full functionality, showcasing a balance between portability and resilience.
Watch this video on YouTube. Key Results from Drop Tests
The drop tests were conducted to replicate common mishaps, such as accidental falls from head or waist height onto unforgiving surfaces like concrete. Each test provided valuable insights into the durability of the Galaxy S25 Edge under different impact conditions. First Drop (Screen-first, head height): The front glass cracked upon impact, but the screen remained fully functional, with no issues in touch sensitivity or display performance.
The front glass cracked upon impact, but the screen remained fully functional, with no issues in touch sensitivity or display performance. Second Drop (Back-first, head height): The back corner of the frame absorbed the impact, resulting in visible scratches and scuffs. However, the internal components and screen functionality were unaffected.
The back corner of the frame absorbed the impact, resulting in visible scratches and scuffs. However, the internal components and screen functionality were unaffected. Third Drop (Flat on back, head height): Cracks appeared on the back glass, and the camera bezel sustained minor scrapes. Importantly, the camera lens remained intact, and both the screen and camera performance were preserved.
Cracks appeared on the back glass, and the camera bezel sustained minor scrapes. Importantly, the camera lens remained intact, and both the screen and camera performance were preserved. Fourth Drop (Side-first, waist height): The frame experienced additional scrapes along the edges, but no further damage occurred to the screen or internal hardware, demonstrating the structural integrity of the device. Material Innovations: Strengths and Limitations
The Galaxy S25 Edge incorporates advanced materials to enhance its durability while maintaining a lightweight design. The front panel is constructed with Gorilla Glass Ceramic 2, which offers improved resistance to scratches and better impact absorption compared to previous iterations. On the back, Gorilla Glass Victus 2 provides robust protection against drops and abrasions, making sure the device can endure everyday wear and tear.
However, the ultra-thin and lightweight design of the Galaxy S25 Edge introduces certain vulnerabilities. While the materials are engineered for durability, the phone's slim profile makes it more susceptible to visible damage, such as cracks and scuffs, especially when compared to thicker models like the Galaxy S25 Ultra. This trade-off highlights the challenges of achieving both portability and durability in modern smartphone design. Balancing Lightweight Design and Durability
The lightweight construction of the Galaxy S25 Edge is one of its most appealing features, making it highly portable and comfortable to use for extended periods. However, this design choice comes with compromises. The structural frame, while durable, showed signs of wear and tear after repeated impacts, particularly along the edges and corners. These areas are more prone to damage due to the phone's slim profile, which reduces the amount of material available to absorb shocks.
This balance between thinness and durability reflects a broader trend in smartphone design, where manufacturers strive to create devices that are both aesthetically pleasing and practical. For users who prioritize portability and sleek design, the Galaxy S25 Edge offers a compelling option. However, those who require maximum durability may prefer thicker models with reinforced frames. Camera Resilience Under Stress
The durability of the Galaxy S25 Edge's camera system was a standout feature during the drop tests. Despite multiple impacts, the camera lenses remained intact, and there were no issues with image stabilization or quality. The protective measures integrated into the camera housing proved effective, making sure that the device's photographic capabilities were not compromised even after significant physical stress.
This resilience is particularly important for users who rely on their smartphones for photography and videography. The ability to withstand drops without affecting camera performance adds to the overall reliability of the Galaxy S25 Edge, making it a practical choice for those who value both functionality and design. Concrete Impact: Real-World Durability
Concrete surfaces are among the most challenging for smartphones to endure, as they provide little to no cushioning during impacts. The Galaxy S25 Edge demonstrated impressive resistance to functional damage when dropped onto concrete from head height. While visible cracks and scuffs were evident, these cosmetic issues did not impair the phone's usability. The screen, internal components, and camera system all continued to function as intended, underscoring the effectiveness of the materials and engineering used in the device.
For users who prioritize portability but still need a smartphone capable of withstanding occasional mishaps, the Galaxy S25 Edge offers a reliable option. Its ability to maintain functionality despite visible damage makes it a practical choice for everyday use, particularly for those who value a lightweight and stylish design.
Discover other guides from our vast content that could be of interest on Samsung Galaxy S25 Edge.
Source & Image Credit: PBKreviews Filed Under: Android News, Mobile Phone News, Top News
Latest Geeky Gadgets Deals
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Times
5 hours ago
- Times
China surpasses German engineering with world's tallest wind turbine
Other countries compete to build the tallest skyscraper, or the biggest Ferris wheel. China and Germany are more serious about their engineering: they compete for the prize of having the biggest wind turbine. One of China's two leading wind turbine companies, Dongfang Electric, announced on Friday it had completed a key test on the latest machine that, when it goes into service shortly, will break that record. Standing 340 metres from its base in the Pacific, off the coast of the country's Fujian province, to the tip of its blades when they rotate to their highest points, it will be the first wind turbine to be taller than the Eiffel Tower. Dongfang — meaning the East — said it had finished load testing a prototype blade for the turbine, itself 150 metres long. 'We're harnessing the power of tech to plant the seeds of a greener future,' it said in celebration. 'Every blade carries a low-carbon dream, ready to catch the wind and grow strong.' China under President Xi has put huge economic weight on not only an ever-expanding industrial base but also being at the forefront of green technologies. With no room for political opposition, and a heavy continuing reliance nationally on coal and other fossil fuels at the same time, there is little of the public debate around wind power that western European companies have faced. China already makes more than 80 per cent of the world's solar panels. Its low cost base — unfairly subsidised, according to western rivals — is also undercutting and starting to dominate American and European production in wind power too. A worker at the Dongfang factory operates a robotic arm At present the wind turbine claimed to be the world's highest was constructed by another Chinese company, Mingyang, and operates off the southern Chinese island of Hainan. Its hub is at the same height as Dongfang's — 185 metres off the ground — but its blades are a few metres shorter. A similarly sized turbine is already operating at the site to which the Dongfang blades are believed to be heading, the Fujian Fuzhou Offshore Wind Power Industrial Park. Its maximum capacity is 18MW of electricity, and the Hainan turbine is 20MW, which the new turbine will surpass by 6MW. According to estimates, that will be enough at average 10 metres per second windspeeds to power 55,000 homes on its own. Britain's tallest wind turbines — at the Longhill Burn Wind Farm in West Lothian, Scotland — stand up to 150m tall. The blades reach as high as 200m. How long any of these three monsters maintain their dominance is unclear. As Germany tries to reclaim its traditional global leadership in engineering — and tries to stave off Chinese competition — its companies are also building higher. A turbine being designed and built by Gicon, a German conglomerate, will stand at 363 metres from toe to the tip of the vertical blade. It, however, is based on a novel design, in which smaller blades rotate from a 300-metre high lattice structure itself influenced by the design of the Eiffel Tower. It will, however, be the second highest man-made object in Germany, after the Berlin TV Tower.
Coin Geek
7 hours ago
- Coin Geek
Bitcoin mining trends in May 2025: Global surge amid innovation
Getting your Trinity Audio player ready... As of May 2025, Bitcoin mining is experiencing a transformative phase driven by technological advancements, regulatory shifts, and evolving economic dynamics. With BTC's price soaring past $110,000, the industry is witnessing a global 'digital gold rush' as nations and companies capitalize on the digital currency's bullish momentum. From Pakistan's bold energy allocation to cutting-edge hardware innovations and shifting profitability landscapes, recent news highlights a rapidly evolving sector navigating opportunities and headwinds. This article explores the key trends shaping Bitcoin mining in May 2025, reflecting a mix of strategic national policies, technological breakthroughs, and market challenges. One of the most significant developments is Pakistan's ambitious move to allocate 2,000 megawatts (MW) of surplus electricity to BTC mining and AI data centers, announced at the BTC Vegas 2025 conference. This initiative, led by the Pakistan Crypto Council and Finance Minister Muhammad Aurangzeb, aims to transform the country's underutilized energy capacity—particularly from coal-fired plants operating at 15% capacity—into a revenue-generating asset. Estimates suggest this could yield 17,000 BTC annually, worth approximately $1.8 billion at current prices. Pakistan's strategy includes creating a national BTC reserve and establishing the Pakistan Digital Assets Authority to regulate the sector, positioning the country as a potential hub for digital currency and high-tech industries. However, the International Monetary Fund (IMF) has raised concerns about this allocation amid Pakistan's energy shortages, highlighting the tension between economic innovation and domestic needs. Technological advancements are also reshaping the mining landscape. Bitmain unveiled the Antminer S23 Hydro at the World Digital Mining Summit, boasting an energy efficiency of 9.7 joules per terahash (J/TH), a significant leap from the 1,200 J/TH of 2013 models. Set for release in Q1 2026, this rig reflects a broader trend toward energy-efficient hardware as miners face tighter margins post the 2024 Bitcoin halving, which slashed block rewards. The focus on efficiency is critical, as rising network hash rates—up 6.7% in April 2025—have driven a 6.6% drop in mining profitability. Miners are increasingly replacing older rigs rather than expanding fleets, aiming to survive squeezed margins in a competitive market where hashprice remains below pre-halving levels of $100/PH/s. Regulatory tailwinds fuel optimism, particularly in the United States, which dominates global BTC mining with over 36% of the hash rate. Pro-crypto policies, including Texas's push for a state-run Bitcoin reserve, create a favorable environment. The U.S. has seen persistent demand for BTC through spot exchange-traded funds (ETFs), with $3.3 billion in net inflows in May alone. However, not all news is positive: BlackRock's spot Bitcoin ETF recorded its largest outflow day on May 30, with $430.8 million withdrawn, ending a 31-day inflow streak. This volatility underscores the market's sensitivity to macroeconomic factors, such as rising U.S. Treasury yields and trade tensions with China. Globally, other nations are joining the mining race. Ecuador hosted its first Bitcoin mining event in Guayaquil, signaling a growing interest in Latin America. Meanwhile, countries like Kazakhstan, Japan, Malaysia, and Bhutan continue to embrace legal mining to bolster their economies. The global hash rate is climbing, reflecting increased competition, but this also raises environmental concerns. A recent analysis suggests AI data centers could surpass Bitcoin mining in energy consumption by year-end, potentially consuming as much power as a country like the U.K. This has sparked debates about sustainability, with environmental advocates pushing for greener blockchain solutions. However, miners resist abandoning existing hardware investments. Home mining is also making a comeback, driven by falling energy prices in key U.S. states, cheaper ASICs, and regulatory clarity from frameworks like the EU's MiCA. Platforms like BCC Mining have launched mobile apps offering 'free cloud mining' for BTC, Litecoin, and Dogecoin, lowering barriers for retail miners. However, the profitability squeeze and high initial costs remain hurdles for small-scale operations. Market sentiment remains bullish, with analysts predicting BTC could reach $200,000 to $330,000 by year-end, driven by institutional adoption and post-halving scarcity. U.S. public companies now hold $349 billion in BTC, a 31% increase since January, while ETF inflows outpace mined coins (26,700 BTC bought vs. 7,200 mined in May). Yet, challenges persist: fraud attempts surged 200% in Q1 2025, and miners face delays and tighter margins. Smart miners are shifting to flexible, hosting-first strategies to adapt. As Bitcoin mining evolves, it balances innovation with economic and environmental challenges. Nations like Pakistan are betting on crypto to drive economic growth while technological advancements and regulatory shifts create new opportunities. However, rising hash rates, profitability pressures, and sustainability concerns highlight the need for strategic adaptation. The industry's trajectory in 2025 will depend on navigating these complexities while capitalizing on Bitcoin's unprecedented market momentum. Watch: Bitcoin mining in 2025: Is it still worth it? title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen="">
Geeky Gadgets
8 hours ago
- Geeky Gadgets
AI Art That Sees, Hears and Reacts: The Future of Interactive Creativity
What if art could see you, hear you, and even respond to your presence? Imagine stepping into an installation where the colors shift with your movements, the sounds evolve based on your gestures, and the entire space seems alive, attuned to your every action. This isn't a scene from a sci-fi film—it's the reality of AI-powered art installations. By embedding artificial intelligence into the very fabric of artistic expression, creators are transforming passive displays into dynamic, interactive experiences. These installations don't just exist to be observed; they invite you to become an active participant, blurring the line between audience and artist. It's a bold reimagining of what art can be, and it's happening now. In this project Rootkid shows how the installations adapts in real time, using advanced algorithms to respond to movement, sound, and even emotion, creating a personalized experience that evolves with you. But this isn't just about technology—it's about the profound questions it raises. Can a machine truly create art, or is it merely an extension of human ingenuity? And what does it mean when the audience becomes part of the creative process? As we delve into this fusion of art and AI, prepare to rethink not only how you view art but also your role in shaping it. AI Transforming Artistic Expression How AI is Transforming Art The integration of AI into art installations represents a significant evolution in how art is both conceptualized and experienced. Unlike traditional static displays, AI-powered installations are dynamic, adapting in real time to their environment and audience. Advanced machine learning algorithms analyze various inputs—such as movement, sound, or even emotional cues—and adjust the artwork accordingly. For example, as you move through the space, the installation might alter its visuals, soundscapes, or even textures, creating a personalized and immersive experience that evolves with your presence. This transformation is not limited to visual or auditory elements. AI enables artists to explore new dimensions of creativity by generating patterns, forms, and interactions that were previously unattainable. The result is a form of art that is not only reactive but also deeply engaging, offering you a unique encounter every time you engage with it. From Viewer to Participant: Interactive Art One of the most compelling aspects of AI-driven art is its ability to transform you from a passive observer into an active participant. Through the use of sensors, cameras, and other responsive tools, these installations react to your actions, fostering a deeper connection between you and the artwork. This interactivity challenges the traditional one-way relationship between art and its audience, creating a collaborative experience where your presence directly influences the outcome. Imagine walking through an installation where your movements dictate the colors, shapes, or sounds that emerge. Your gestures might trigger cascading lights, shifting patterns, or evolving soundscapes, making you an integral part of the creative process. This level of engagement not only enhances your experience but also redefines the role of the audience in the artistic journey. By interacting with the installation, you contribute to its narrative, blurring the lines between creator and participant. AI is Turning Art Into a Living, Breathing Experience Watch this video on YouTube. Unlock more potential in Artificial Intelligence (AI) by reading previous articles we have written. AI as a Creative Partner Artificial intelligence introduces a new dimension to the creative process, acting as both a tool and a collaborator. Unlike traditional methods where the artist solely dictates the outcome, AI brings its own capabilities to the table, processing vast amounts of data, identifying patterns, and generating novel artistic outputs. In these installations, AI responds to your interactions while contributing its own creative elements, resulting in a partnership that combines human ingenuity with machine intelligence. This collaboration demonstrates how AI can enhance, rather than replace, traditional artistic practices. By using AI's ability to analyze and adapt, artists can push the boundaries of their creativity, exploring new forms of expression that were previously unimaginable. For you, this means encountering art that is not only visually and intellectually stimulating but also deeply personal and interactive. Redefining Artistic Boundaries The incorporation of AI into art installations challenges conventional definitions of art and authorship. The final output is shaped not only by the artist's vision but also by the AI's autonomous contributions and your interactions. This raises thought-provoking questions about the nature of creativity and authorship: Can a machine truly create art, or is it merely executing programmed instructions? What role do you, as the audience, play in shaping the final piece? These questions encourage you to reflect on the evolving relationship between art and technology. By blurring the lines between human and machine creativity, these installations redefine what it means to create and experience art. The collaborative process between artists, AI, and audiences opens up new possibilities for storytelling, experimentation, and engagement, paving the way for a more inclusive and dynamic artistic landscape. A Dynamic, Ever-Changing Experience One of the most captivating aspects of AI-driven art is its ability to evolve in real time. These installations are not static objects but living entities that adapt to your presence and actions. Whether through shifting visuals, adaptive soundscapes, or other interactive elements, the artwork continuously transforms, making sure that no two experiences are ever the same. This dynamic quality invites repeated engagement, as each interaction offers a new perspective or narrative. For you, this means that the installation becomes more than just a piece of art—it becomes an ongoing dialogue, a story that unfolds differently with every encounter. This ever-changing nature not only holds your attention but also highlights the potential of AI to create art that is both innovative and deeply engaging. Pioneering Techniques in Modern Art The use of AI in art installations exemplifies the innovative techniques shaping contemporary art. Artists are increasingly using technology to explore new mediums and methods of expression, pushing the boundaries of what is possible. These installations serve as a prime example of how AI can be used to create works that are not only visually striking but also intellectually and emotionally resonant. By merging art and technology, these installations open up new possibilities for storytelling, audience interaction, and creative experimentation. For you, this means experiencing art that is more immersive, personalized, and thought-provoking than ever before. As AI continues to evolve, its role in the art world is likely to expand, offering new opportunities for collaboration and innovation. The Future of Art and AI Collaboration As AI technology advances, its potential to transform the art world becomes increasingly apparent. The collaboration between artists and AI has the power to unlock unprecedented forms of creativity, resulting in works that are more interactive, personalized, and engaging. For you, this means encountering art in ways that were once unimaginable, where your presence and actions play a central role in shaping the experience. The integration of AI into art installations is just the beginning of a broader movement toward a more technologically enriched artistic landscape. By combining the strengths of human creativity with the capabilities of AI, artists can explore new frontiers of expression, creating works that challenge, inspire, and captivate. This fusion of art and technology not only enriches the artistic experience but also paves the way for future innovations in AI-driven creativity. Media Credit: Rootkid Filed Under: AI, DIY Projects Latest Geeky Gadgets Deals Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
